IDVD ERROR's during burning

Ok i am about to distroy my computer for real,
Ok when ever i want to burn a project gets all the way to the end, i get multipexing errors or error #1 everytime. Anyone know the deal or easy fix?

Hi Jonathan
Was Your Mac delivered with Mac OS X.4.2 and QT 7.0.3
or is it possibly to downgrade to OS X.3.9 and QT 6.5.2
this is a stable movie and DVD environment - my experience.
Error #-1 Happened to me once. I had:
done a movie in iMovie (less than 50 min) and imported a sound file (.aiff)
that was more than 60 min and I needed about 2 min. So I cut away the
obsolete parts. iMovie couldn't handle the parts that hid away under the
right end of the timeline. Resulted in sounds that was un-deletable and
in an ERROR #-1 in iDVD.
I did: Deleted all sounds on both sound-tracks and imported new sound but
this time I cut it up in more matching portions.
Now : No error
Yours Bengt W

Similar Messages

"Errors Found During Burning Process"

Hi,
Having sucessfully burned AVI movies using iDVD in the past I have started getting errors. iDVD now does the same thing regardless of the movie i'm trying to burn and the media I use.
Having selected Best Quality (due to the film size), the menu rendering works fine, as does the prolonged job of encoding the video. When iDVD gets to the Audi encoding bit, just before it starts to burn the DVD itself, iDVD ejects the disc and states: Errors Found During Burning Process.
Clicking on the arrow to get more info it states: "The recording device reported the hardware error: Tracking servo failure. (0x09, 0x01.)" Bizarrely, the main iDVD progress window states both 'Cleaning Up' and 'Writing Lead-In' and the only way to get out if it is to force quit.
I've read a few posts on here and tried a couple of things such as trashing the plist file and reparing permissions. I also booted up the diagnostic disc to see if it could see a problem with the optical drive. But nothing has solved the problem.
Any ideas?
For reference, I'm running iDVD 5.0.1 on Tiger on a 1.8 G5 iMac with 1GB RAM.
Appreciate any help you can give me.
Neil

Colleagues:
Ran into the same error, # -34506. Definitely frustrating as I was burning a DVD of an iMovie that I'd spent many hours editing. The iMovie is only 30 miniutes in length, so I don't think it's a size issue. iDVD went through each one of it's steps in burn DVD sequence. However, 45 minutes later when processing is finished, the message reads: "Burning Finished, Errors were found during the burning process." Clicked to see the detail: "The error # -34506 was reported." Checked the DVD and nothing was burned!!! The same thing happens when I opt for disk image. No img file is produced. This is especially frustrating as it looks like it all but completed processing.
Does anyone know what Error # -34506 specifically indicates? How do you fix this? Does it only happen in a specific sequence? And, is Apple aware of the problem?
Thanks!

Error found during burning process

I am having a problem burning my iDVD project to disk. I'm using DVD-R disks. The message I get is "Errors found during burning process". The burning process seems to work correctly all the way through until it gets to the last step - "burning".

There are lots of things that can cause problems burning to disk.
I suggest that you save your project as a disk image (an option on the iDVD file menu) and see if that is successful. If it is successful, that would eliminate issues related to iDVD, encoding, and source material. After that, I would look to what brand of DVD you are using (Verbatim, Sony, Fuji, and Hp are oft recommended here), what burn speed (4x or lower is best), whether all iLife programs are up to date, whether you have any 3rd party or Quicktime plug-ins that might be interfering, whether you have sufficient hard disk space to burn (20 Gb is recommended, although 5GB would be absolute minimum).

Error messages during burning DVD audio

When burning a musical DVD audio 96/24 in Toast imported from an i Tunes playlist I get the message:" file VTS-06 etc inaccessable .
Data Fork -39 , plus a Mac system error. Mostly the error occurs during burning , sometimes during simulation but this happens rarely.
Can someone tell me where the problem is. many thanks

Here's what the Help Menu offers:
Exporting a movie to iDVD
Once your movie is ready for viewing, iMovie HD can automatically export it to an iDVD project that you can burn on a DVD. You can then view your DVD on a television using a DVD player or on your computer screen using the Apple DVD Player.
Note: Before you export your movie to iDVD, you can add chapter markers to it so that viewers can quickly review different sections of the movie on DVD. If you've added chapter markers, they are exported with your movie, and you can use them to add scene selection menus to your iDVD project.
Not all computers support iDVD. See your computer's manual to find out if your computer does.
To export your movie to iDVD:
Choose Share > iDVD.
Click the "Share selected clips only" checkbox if you only want to share clips you selected.
Click Share.
iDVD opens and your movie appears in a new project in iDVD.
For more information about using iDVD, choose Help > iDVD Help when iDVD is open.
After you have addressed the above then follow this:
http://docs.info.apple.com/article.html?artnum=93006
other informative links include:
http://discussions.apple.com/thread.jspa?messageID=4771939&#4771939
http://www.digitalfaq.com/media/dvdmedia.htm
Good luck!

How to make movie in iDVD without themes. iDVD app quitting during burning

I am trying to make movie without themes and still having problems. I have tried using the map view in themes, dragging movie into the first box on left, looping it - but am seeing a yellow error sign in the theme box. Don't know why this is. Have tried to burn movie anyway but iDVD app quits halfway thru. Today I tried just simply going to iDVD >file>onestep DVD from movie>select movie and inserting disc. This seems to be the simple solution I have been looking for to burn a movie without themes but iDVD still quit on me halfway thru burning just now. Is this a space problem? Disc problem? help...

OK F Shippey - Using this computer for anything other than email is pretty new to me. I have just recently began using imovie and idvd. I have burned one idvd and working on a second. While making the movie I was constantly having to delete old footage to make room for space. In other words I don't know much about space and usage. I know that in my new imovie project it says that i have 7.53 Gb available. I know i have a Lacie external with one DVD on it. So what do i need to know about space on a hard drive while using imovie? How do you monitor how much hard drive space you have while working on projects like this? Do I find this info in About This Mac? Sorry for so many dumb questions. Clearly I don't know what I am doing. Thanks for your reply.

"Burning finished. Errors detected during burning".

I have been trying to burn in iDVD 5 without luck. I keep getting the message in the subject line "Burning finished ..." after it has encoded all the media.
the project seems to encode/compress the data, but then not physically burn the media.
It was working fine until iDVD crashed on me one time -- since then, I have not been able to successfully burn.
Any ideas? Many thanks in advance. I am using all the latest software.
Long live the sunflower iMac G4, iBook G4 Mac OS X (10.4)

sometimes idvd errors occur because of a corrupted file. I had everything go smooth...video encoded good but then it froze up after trying to encode the audio...I went back into my project and deleted the "added" music [ wedding video] and tried music that I knew worked before....voila! It was corrupted music file[s]...I found that sometimes my clients will give me a CD with their music on it it and it will not work in idvd even though it worked fine in imovie!

Error message during burning: Error during rendering/encoding

Hello,
I am using iDVD 6.0.2 to create a DVD. I have pictures and videos. The videos are in .ASF format and they are played on Quicktime on my computer.
Anyway, when I go to burn the DVD, it goes through the slideshow fine. But then, once it starts videos, it stops and the following error message shows up:
Encoding Video
Error during rendering/encoding
I am using a Memorex DVD-R (8x, 4.7 GB, 120 min video) dvd. Is there any way possible I can fix this problem? I really need this DVD soon. Thank you so much.

Best Buy and Office Depot carry Verbatim by me. Use only DVD-R, not DVD+R.
My guess is that .ASF file...........
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

IDVD error message during Multiplexing

I'm trying to burn a project in iDVD 6. I think that my superdrive may be toast. Here is the error message:
Errors were found during the burning process
The recording device reported the media error. Power calibration area error
Multiplex error (ox73, oxo3)
There was a problem during mulitplexing/burning.
Does anyone know what would be wrong here? I can burn a data disc with no problems but when I burn to a DVD I get all sorts of problems. I never had this happen before. Any help would be greatly appreciated. Thanks!
-Chuck

Power calibration area error
This happens when your drives is doing a test burn on a portion of the disk reserved for this calibration.
When it fails, it means:
1) You have a failing drive
or
2) You have a bad blank DVD-R (or DVD+R, etc.)
or
3) You have a dirty laser lens on your drive.
Let's hope it's 2 or 3.
for 2 - Try another brand of DVD-R, I like Verbatim.
for 3 - use a CD/DVD lens cleaning disk, or another method to clean the drive. (NOTE - some users don't like these cleaning disks, and have claimed they have harmed their drives - obviously I disagree, but keep your cleaning disk as clean as possible!)
Try one of these, and then try making a data DVD from the finder. When this works OK , go back to iDVD. I always reccommend using "Save as Disk Image" and then burn the image with Disk Utility or Toast.
John B

IDVD ejects disc during burning process of Dual Layer DVD

Hi,
I am trying to burn a 3hr iMovie project of a recent holiday trip. Due to its size, it therefore needs to go on a Dual Disc DVD. I intend to burn 8 copies, one for each member of the holiday.
I successfully burned the first disc in iDVD, however since then, the disc prematurely ejects at the "Multiplexing and Burning" stage, (At the 'Writing Lead In' stage within this) ,usually with 31mins remaining
I am burning at 4x , I have 27GB free space and I am using AONE Plus DVDs. I have read many discussions on here about buying Verbatim DVD-R's which i can do, but with the first dvd burning successfully, I would prefer to try other options before I commit to purchase..
Thanks in advance for any help you can give me
Max

Hi again,
I purchased a pack of Verbatim DVD-R DL Discs, tried the iDVD route and it ejected at the burning and multiplexing stage again. Not only this, but after burning and trying that same failed disc again, it actually contains part of the project, so this disc is now unusable.
After this I went the Disc Utility option as you advised and successfully got to the end until the 'closing session' section. Here, it continues to load and says it is 'closing the session' and i can hear my Disc drive spinning away, stopping, then starting to spin again (this continues to happen forever and ever)
Any suggestions at this stage would be great as i'm truly at a lost cause now..
Thanks
Max

IDVD Randomly Quitting during burn?

Hullo! Posting here cause I've been quite unsuccessful in burning two dvds of mine.
I have about 25 episodes in .avi format that seem to work in preview, work in quicktime/VLC ect.
But halfway through the burn process iDVD just randomly quits on me, doesn't say why but just comes up with a " A disk has been inserted what do you want to do ". Why this happens I don't know, because the disk has been in there through the burn process the whole time
Anyway just looking for some feedback as to whats going wrong. Also I converted it to DVD format through VisualHub but iDVD doesn't recognize that either, and I tried repairing some disk permissions or whatnot to see if that would help.

Welcome to iDVD Discussions.
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
http://www.kenstone.net/fcphomepage/image_to_diskstone.html
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Idvd keeps freezing during burn of slideshow

Any suggestions?

Hi
Can be a zillion things. Please tell what You've done - It's so very hard to guess.
• Can it be so that there are more than 99 photos per SlideShow - iDVD limit
• Free space on Start-Up hard disk. Less than 25Gb free space ?
• photos used of a strange format as .bmp etc.
• audio used in a strange format as .mp3, .wma etc
• Does it freez - in iDVD test mode - or while burning DVD - or when DVD is played
• DVD brand used
• DVD type used
• Burn speed - set down to ?
And many many more things need to be asked if You don't share a step by step description on what You've done to help us understand where it went wrong.
Yours un-able to mind read - Bengt W

Error reported during burning a dvd

Hello. I am trying to burn a dvd in dvdsp 4.1.2 and I'm getting this message:
The recording device reported the media error: L-EC uncorrectable error (0x11, 0x05).
I have burned many dvds with this computer and program and all of a sudden I'm getting this message. What does this mean? I need to get this dvd burned for a client and I'm stuck. Please help. Thank you.

Possibly an issue with your optical drive.
Are you still under warranty?
Have you tried other media?
Have you tried slower speeds?
Joe

Device error during burning w/iDVD

Well, I spent some time learning about codec et al and was able to get a divx file to run on QT... movie looks good on MAC when running QT. I put into idvd and it also looked good as I ran it in preview. Spent several hours in burn process and at the end the dvd was ejected with below message. The dvd physically looks properly burned but it is not accepted by my dvd player... I've made many imovie projects that burned properly in idvd.
"The recording device reported the hardware error: No write current. (0x03, 0x01.)"

Rick,
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (not the .img, the one below) in the left-hand window. Click the Burn icon. A new window should drop down. Select a burn speed. Your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (DVD-R preferred by me.) Click the Close button. Wait. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
b Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
Use Verbatim DVD-R. Burn at 4X or slower. Office Depot and Best Buy carry them by me.

Error during burning slideshow

I get an error message during encoding using iDVD 7.0 when burning a DVD or when attempting to save as disc image. I've used Apple support and nothing helps. Any ideas?

Thanks much. I changed the theme and it worked fine. Odd thing is that I was using themes in the program and did not create my own. Thanks for responding.

Error message when burning HD with iDVD

When i try to burn a HD movie directly from iMovieHD( v. 5,02) with iDVD( v. 5.0.1), i get an error message code OX8002006D, followed by another:
"Burning Finished.---errors were found during burning process."
and "there was a problem during multiplexing/burning"
and the disk is ejected blank.
With a Standard Definition movie, using the same DVD-R or DVD+R disks(4X) and same procedure, i have no problem. The movie was only about 2 minutes long with about 19 GB available.
Anybody out there who knows what's wrong?
Hans

There are a bunch of folders within your home folder, you may want to decide what exactly you want to back up or not.
Besides your personal folders (Desktop, Documents, Movies, Music, Pictures), you may want to decide whether you need to back up the library folder. The library folder generally contains preferences for most of your applications, and also caches and applications support files. These can become really big in some cases (Mine is more than 8GB, will not fit on a dual layer DVD). And the Library>Caches folder contains temporary files that will change from time to time, this might be the cause of your previous error since the shortcut is no longer valid.
Once you chose your files and make sure they will fit on your blank CD/DVD, you can just do what you did before, drag the folders to a Burn folder, make sure you are not running any other apps, so they won't be modifying the files.
There are programs you can use to backup to CD/DVD, Disc burner like Toast will span across several discs if the data does not fit on one. For a more automated solution, Carbon Copy Cloner (http://www.bombich.com/software/ccc.html) can backup to disc images which you can then burn to discs. I personally don't know a lot backup programs that provide good support for CD/DVDs, so I'll leave this to other folks.
If you are going to backup regularly, I would recommend spending some money on an external drive. You can find quite a few free software for automated backup and saves money and time on burning CD/DVDs. Plus you have the advantage of being able to boot from the external drive should anything bad happened to your internal one.

IDVD ERROR's during burning

Similar Messages

Maybe you are looking for