IDVD how to set chapters markers according to the day

iDVD wont let me set chapters markers according to the day of the trip. No good by minutes! I did have markers in the imported iMovie which have been ignored.

Hi
iDVD can only set Chapters in time interval e.g. every 5:th minute
iMovie'13 (Version 10.0.x) - CAN NOT set Chapters at all
Rest - You must use the Chapter Mark - Not the Note Mark (it will be ignored)
If You've done this and they do not show up in iDVD - iDVD pref file most probably got corrupted. Trash it and re-try with a NEW iDVD project.
Yours Bengt W

Similar Messages

How to set Multi User Environment in the weblogic 5.1 and 6.1 server..(Urgently)

Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

Hi. A JDBC connection pool is a set of identical, interchangeable, pre-made
connections, and the controls to make sure only one user uses a particular
connection at any one time. If you want to have different DBMS users, you can
have a separate pool for each DBMS user, which may contain as many or few
connections as you want. Some applications has a pool for the accounting
applications, and another for the sales applications etc. Some do have a
separate pool for john, jane, joe etc, each with one connection. Pools
can be created and destroyed dynamically using the dynamic pool API.
Joe
softstar wrote:
>
Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How to set a variable value on the BPC Data Manager

Hello BPC Experts,
I'm creating a BPC10 NW version demo environment for our prospect customer.
I made a data manager to import BW data into BPC model from BW cube.
I need to import just one month data into BPC from the BW cube that has more than one month data.
When I run the data package manually, I can select a member of the time dimension prompt and I can import specific month data I want.
But, in a case where the program (data manager) runs by JOB monthly,
I can't select a member of the time dimension prompt manually.
So I want to know how to set a variable value to the time dimension prompt from a system date etc. automatically.
Are there any way to set a variable value to the time dimension prompt on the data manager automatically from a system date?
Or, do you have any other solution to import just one month data into BPC from the BW cube that has more than one month data by the data manager running on JOB ?
(without selecting a member of the time dimension prompt of the data package manually)
Thanks in advance,
Keisuke

Hi Gersh
Sorry for my late reply and thanks for your helpful information.
I tried the second way of your information and I could configure it.
And I 'll try first way of your information.
Regards,
Keisuke

I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.

?? I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.

Thanks, David. i thought i had it set correctly in Preferences in L&R. Being i was wearing my suspenders and belt at the same time i went back to L&R, cleared what was there and re-entered same to include unchecking and rechecking Time Format fgor 24-hour time. It works now. Thanks again.

How to set colors in cells depending the conditions in alvtree

Hi All,
Could you please provide me idea or sample program how to set colors in cells depending the conditions in alvtree.
Thanks,
Suresh

When running vim in a terminal, it will use whatever colour scheme is defined by the terminal. You should have a look at this thread:
http://bbs.archlinux.org/viewtopic.php?id=51818
Also, check the wiki article on Xdefaults.

How to set field to blank if the data is # or unassigned

hi experts,
how to set field to blank if the data is # or unassigned?
thx

Hi
add the following macro to your workbook (template workbook):
Sub SAPBexonrefresh(qstring As String, resultArea As Range)
    For Each c In resultArea
        If LCase(c.Value) = "not assigned" Then c.Value = ""
       Next
End Sub

How to set chapter markers in imovie 10

I am looking to set chapter markers at fixed intervals in imovie 10 as well as set custom chapter markers in family videos that I am converting from 8 mm tape. Does anyone know how to do this in imovie version 10.0.6. Thanks

Apple has removed the ability to set chapter markers with iMovie 10.
I use iMovie HD 06 or iMovie 11. (My favorite is iMovie HD 06.) Both are readily available on Amazon as part of iLife 06 or iLife 11. With these versions of iMovie one click will set your chapter markers. These markers are automatically recognized by iDVD.
http://www.amazon.com/Apple-iLife-Mac-DVD-VERSION/dp/B0007LW22G/ref=sr_1_1?ie=UT F8&qid=1424968719&sr=8-1&keywords=iLife+06

How to set condition scale according to accumulated purchasing quantity?

Hi,
I want to set different condition scale for a material according to the accumulated purchase quantity against a vendor (includeing historical purchase order), just like follows:
Accumulated purchasing qty (including hostorical PO): 100 pcs ---> 1.5$/pc
Accumulated purchasing qty (including hostorical PO): 200 pcs ---> 1.4$/pc
Accumulated purchasing qty (including hostorical PO): 300 pcs ---> 1.3$/pc
Accumulated purchasing qty (including hostorical PO): 400 pcs ---> 1.2$/pc
Accumulated purchasing qty (including hostorical PO): 400 pcs ---> 1.1$/pc
So, how to realize this by standard functions?
Please kindly advise.
Thanks and best regards.

Hi, Sanjay,
Thank you very much for your answer.
But manybe I had not described my qustion more clear, my requirement is, to control the quanaity-based scale according to accumulated purchasing quantity including historical purchase order but no the one/individual purchase order.
So, please kindly advise again.
Thanks and best regards.

How to set condition scale according to accumulated consignment quantity?

Hello,
We have different consignment prices for the same material vendor depending on the quantity.
For example:
First 100 pcs -->1.5$/pc
Following 100 pcs -->1.4$/pc
Following 100 pcs --> 1.3$/pc
So, I want to set different condition scale for a material according to the accumulated quantity transferred from vendor consignment to own.
So, how to realize this by standard functions?
Everything that I have tried with the scale condition type in consignment info record only works with the quantity that I am transferring in that moment from consignment to own. Is there any anything that I can setup to take into account the accumulated quantity?
Please kindly advise.
Thanks and best regards.

Look at the Group Condition settings of your Condition Type. You'll need to some ABAP resource to create a Requirement.

How to set Appointment Times according to SLA

Hi Experts,
I have the following requirement:
One order has a number of items. These items have a duration. I need to set the appointment times of each item (e.g. SRV_CUST_BEG or SRV_CUST_END) according to the duration. For example, if the start time of the order header is 7.00 am, the start time of the first item will be 7.00 am and the end time will be 8.00 am (assuming the duration is 1h).
Now the problem is that these time must be set within an SLA! In the example above (assuming the SLA times are 8.00 am to 5.00 pm) the start time of appointment must be shifted to 8.00 am and the endtime, accordinlgy to 9.00 am.
What I need to know now for you experts is whether there are any means of letting the appointment time being adjusted to fit into the times of the SLA...
Hope the matter is clearly explained.. I need to solve this!
Please help me out here..
THANKS, Johannes

Hi Joannes
Are you using RPA for Scheduling?
You should be becasue, Appointments scheduling is the function of RPA. When you do configuration for RPA in the Service order Line item, Use SLA_DATE Profile and make sure the Requested start and Requested end date is determined based on the SLA, then the appointment will always fall under the SLA Period, what ever may be the duration,.
Thanks
Raj

How to set default variable value in the workbook

Dear experts,
I used several queries in a workbook and one of these queries contained a variable, so when every time the workbook is opened there is a window popping up to ask user to input the value for the variable.
Now I wanna set an default value for this variable so that the variable input window will not pop up when the workbook is opened.
I searched the forum and found most solutions is to use the SAPBEXqueries to set value for the variable.
But in my BEx analyzer I can not find this sheet named SAPBEXqueries. and I also found some difference between my analyzer and the ones descripted in the forum.
My BEx analyzer version is 6.40. I think it's a new version.
Do you know how to solve my problem with this version BEx analyzer?
Thanks in advance!
Best regards
Fanchest

Hi Leo,
Yes I tried the personalization but it seems doesn't work, I don't know why.
I set the personalization in the BEx analyzer according to the help documentation step by step but the variable selection screen still pop up when the workbook is opened.
If I executed the query which contained in the workbook seperately there is no variable selection screen pop up.
And because I don't wanna change the variable, so I didn't uncheck the ready to input.
Thanks for your infomation!

How to set up fb integrated on the new ios6

i have an iphone 4 and i just did the update to the new ios6 and i do not know how to set up the integrated facebook for it to come up on the notification center. is it even compatible with the iphone 4. please help anyone!

Open up Settings, and scroll down a lot until you see "Twitter" and "Facebook" right next to each other. From there, it's a simple matter of signing in.

How to set a Default Value in the drop down on Account Creation ?

Hi,
i have to set a default value in the drop down as soon as a User in a particular business role clicks on New Account. I have written the following code in do_prepare_output method. But this code is executed in the 2nd server round trip after entering some value or pressing enter. so i am not getting as soon as user clicks on the New Account.
How to set that default value when user clicks on New Account ? and where should i code ?
IF lv_icwc_profile = 'ZCSALESPRO' or lv_icwc_profile = 'Z_SALESPRO' .
try.
              lr_entity ?= me->typed_context->header->collection_wrapper->get_current( ).
              lv_current = lr_entity->create_related_entity(
                                              iv_relation_name = 'BuilRolesRel' ).
                             lv_current->set_property(
                                iv_attr_name = 'PARTNERROLE'
                                iv_value     = 'BUP002' ).
               CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
               cx_crm_genil_model_error.
               return.
        ENDTRY.
Thanks and Regards
Raman Khurana

Hi,
I have some idea abt it, it is also used in account life cycle.
Please refer SAP note 1097651, Defaulting a life cycle stage.
Let me know if useful.
rgds,
Vinay

How to convert date-time according to the Time Zone the client

Urgent! Help wanted!
I extract a date-time field (which is GMT time) from the central database but I need to convert it accordding to the TimeZone of the user and also the so-called winter time and summer time in the local. Any one has any good solution?
Thanks.

Use a Calendar, Timezone and Locale objects like this,
TimeZone tz = TimeZone.getTimeZone("Germany/Berlin");
Calendar cal = Calendar.getInstance(tz, Locale.GERMAN);
long date = 0; // assign your central database value to this variable
cal.setTime(new Date(date));
Now you can use the Calendar object 'cal' to retrieve the time according to the set locale and timezone.
These objects provide tonnes of features for finding out timezones and day light savings times. So check out the APIs as well.
I hope this helps you out.

IDVD how to set chapters markers according to the day

Similar Messages

Maybe you are looking for