IDVD-IMOVIE - encoding audio

IDVD Application stops responding when encoding audio from Imovie. Any suggestions would be helpful. I've made IDVD projects successsfully before, but can not get this project past audio encoding. I've tried exporting and sharing - but no avail.

iMovie help screen advises - "For the best compatibility with iMovie HD transitions, effects, titles, and the Ken Burns Effect, you should record your video with 48 kilohertz (kHz), 16-bit audio. Check your camera's manual for instructions on setting the audio bit rate and depth."
I’ve experimented with a ten minute movie with added audio. I set the sample rate at 48,000 khz and experienced no audio encoding stalling in iDVD.
So, if you use music you imported into iTunes, make sure the iTunes preference is set at 48,000 khz. The default is 44K.
With your present iMovie project, export as Quicktime and select "Expert Settings", click on "Options", click on "Sound settings" and set the sample rate at 48,000 khz and the sample size at 16 bit. (Also make sure the Video is set for DV/DVCPRO). Once you have this exported version of your movie, insert it into a new iMovie project, add chapters, and then go to iDVD. I can’t guarantee it will work but its worth trying.
Previously, I suggested to people to export to a DV format video camera and then insert the movie into a new iMovie project. It would result in quick audio encoding in iDVD. I recently found that my video camera exports the sound at the 48K khz sample rate, further supporting that the problem maybe the sample rate.

Similar Messages

IDVD 6 Encoding Audio....

I've spent most of this week trying to burn my iMovie film to DVD, and like many people on this forum, and other areas of the internet, I'm unable to do so with iDVD 'locking up' at the encoding audio stage.
I know its not the machine or RAM, as my iBook also does the same.
I'm sitting here having now waited 24 hours for it to finish - but it hasnt.
I know its doing something, as I've opened the package contents of the iDVD file and I can see 'tempmovie.mov' very slowly increase in size.
But I've burned many films before (in previous ilife verions), and to wait for such a long period is not right.
My last major project involved the burning of an AVI type file of 90 minutes, and it took a single overnight processing session to sort that out.
It must be the fact its an iMovie film thats causing problems, but can someone advise me how to speed it up ?
I am assuming it will finish, and I'll have a pristine DVD (lol)
If you use google you will see that many people have the same issue, as on this forum. Some people have speculated its MP3, or other audio issues on the iMovie soundtrack, but until someone can say and publish definitively what it is I (and many other) apple users are unable to burn their DVD's.
Any help from anyone would be appreciated, but none of this trash the preferences or whatever as that does not work.
Its a bug, and the sooner a patch is released, the better we will all be.
Thanks
iMac Flat Panel & iBook Mac OS X (10.4.7)
iMac Flat Panel & iBook Mac OS X (10.4.7)

The same effect on a brand new MacBook! iDVD 6.02 is hanging. Spin Ball does't turn anymore. Terminal >top shows 100% on the processor.
Processes: 85 total, 3 running, 82 sleeping... 284 threads 16:38:22
Load Avg: 0.99, 1.12, 1.10 CPU usage: 53.4% user, 8.5% sys, 38.1% idle
SharedLibs: num = 181, resident = 42.6M code, 4.83M data, 6.76M LinkEdit
MemRegions: num = 12645, resident = 339M + 21.1M private, 125M shared
PhysMem: 107M wired, 443M active, 459M inactive, 1011M used, 13.0M free
VM: 8.13G + 129M 37788(0) pageins, 888(0) pageouts
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
688 top 13.9% 0:01.73 1 18 22 1008K 296K 1.41M 26.9M
374 iDVD 100.3% 62:46.50 18 257 1131 78.9M 30.0M 76.4M 303M
Regards Rolf
MacBook Mac OS X (10.4.7) 1G Ram

Encoding Audio delay using iDVD ...

Why are Apple not rectifying this bug?
iDVD appears, even to the most advanced user, to have crashed when it comes to the Encoding Audio section. But it hasn't. Let it run. Yes I know that even if you check the Force Quit menu it shows iDVD as "not responding" but it is working.
Come on Apple - sort this out.
MacBookPro Mac OS X (10.4.8)

iDVD 6 Encoding audio "delay." So am I supposed to believe that iDVD is actually "working" on encoding the audio even when after 12 hours it says in the Force Quit menu that iDVD is "not responding" and there's a spinning cursor?? Balderdash!
I have spent the greater part of the last 3 days trying to finish off a massive project for my family: transferring all our old home videos to DVD. Actually, I spent many many additional hours adding a soundtrack with songs and sound effects to these silent movies. And all for nothing!
Trying to fix the problem of iDVD stopping responding during audio encoding, we bought a 500 Gb hard drive to clear up more space on the hard drive: $$!
I even tried turning off the audio track and just burning the dvd without it. Not even that worked! It still freezes up.
APPLE, if you are listening. PLEASE PLEASE FIX THIS. This was to be my Christmas Gift to the family, and your product has FAILED.
powermac g5 Mac OS X (10.4.8)

Can't burn iMovie to iDVD (not responding) - after "Encoding Audio"

Hello,
I have a similar post in the iDVD board, but thought someone in this section may be able to help as well.
I have a 15 minutes project (almost 2 GB) iMovie show that I've attempted to burn to DVD through iDVD (4 times with the same problem)...
It goes through the "encoding menus" and videos, but gets stuck on "Encoding Audio" and in my Force Quit window says (Not Responding). I have almost 12 GB free on my PowerBook G4 and successfully burned a test DVD of this last week before completion (when I only had 7 free GB - I also added on another 2 minutes since then)...
Any help or ideas? I need to get this done ASAP...
Thanks
Chris

Chris, what I've found is that patience is the key here. You really can't count on the progress bar to let you know how far along in the process you are. I've run into the same problem as you. When the burn symbol stops spinning and you get the beachball/lollipop don't rush right off to force quit. Just because the force quit menu shows that iDVD is NOT RESPONDING does not mean that all is lost. What made me realize that iDVD was still working was the Activity Monitor located in your Utilities folder under applications (applications/utilities/activity monitor).
Do yourself a favor and run this app while burning you project. When you get to the point where it appears to hang on you check the status of iDVD in the activity monitor window. More than likely it will show that iDVD is still using a good % of your CPU (%CPU column numbers will constantly change as iDVD demands more or less from your processor). You may also notice that it may show that iDVD is not responding (as well as a couple other processes that are related to the prog), this doesn't mean a thing because iDVD is in reality still chugging along. Of course if the %CPU column is showing 0.00 then iDVD has indeed stopped workin in which case you do have some issues.
Hope this helps

When Burning IDVD hangs at Encoding Audio

I have a 2 GHz PowerPC G5 iMac
1.5 GB DDR SDRAM
SuperDrive - Double Layer dvds
This is my first time using IDVD - I have a 2 hour movie that I am trying to burn.
It hangs and gives me the multicolored wheel when it is trying to encode the music during the burn process. It took about 5 hours to get to the point that it is now, and then an extra 3 since the multicolored wheel has been up. I have read other posts and some say, let it spin, and eventually it will finish. But I am not sure if they mean when the multicolored wheel is showing. Does anyone know what I need to do? I am desperate for HELP!!

Strange how I can't edit my post now even though it's only been half an hour...
I checked on the progress of the burn and the audio was finally encoded after about five to ten minutes of the "spinning lollipop". It said it was encoding the audio and seemed to hang, but when I went back to check on it the DVD was already burned. I looked for other advice on these boards and people recommend taking the MOV file from your iMovie project and dumping that directly into iDVD instead of exporting from iMovie to iDVD. To do that, control-click (or right-click) on your iMovie project icon in the Finder. Go to Shared Movies > iDVD and find the MOV file in that folder.
Many people have had this problem with iDVD hanging at the "Encoding Audio" stage, but if you leave it long enough, it will eventually finish. I think it's just a bug with the progress bar.
Good luck.
P.S. the movie that I was burning is only about 7 minutes long. I had first tried burning it from my PowerMac G4 but moved to an iMac G5 for my final attempt at burning and it now works. The first time around on the G4 the audio never finished encoding but after moving the iDVD project (and all the support files), it burned the DVD without any problems.

IDVD failing to encode audio

Help ! I am making a DVD for the high school baseball team and the banquet is next week. I did the same thing 2 years ago without incident. My iMovie is a slideshow of digital photos set to music. When transferring to iDVD, it encodes the menu, encodes the video (takes 2 hours) and then fails to encode the audio. The colored circle spins for a few minutes. The burn circle stops spinning. My laptop (Powerbook G4) spits out the DVD disc blank. I tried taking off all songs expect one that I used 2 years ago without incident. Did not work either. I am very very disappointed. The kids were going to love this. Any ideas ? If worst case scenario occurs, is there someplace (I live in Ann Arbor) I can take the iMovie file to and have them make a DVD ? Any advice is greatly appreciated. I am working with iMovie 5 and iDVD 5. Will it help to upgrade to ILife 06 ? Thanks

I only have 1.21 GB at this time because I
transferred the iMovie to my laptop. Having said
that, the reason I put it on my laptop is that I made
the iMovie on an external hard drive with over 300
GB. The problem first occurred on the external hard
drive (Western Digital). I thought moving it to my
laptop might make a difference. It did not.
iDVD needs to use your start-up hard drive for many things when creating a DVD. You need to freeup at least 10 GB (15 or 20 would be better) for things to work.
My son plays for Huron. We split with Pioneer. I live in A2
but went to ND. Are you still willing to help me ?
Certainly - but since I live near Rochester, NY all I can do is offer written support here in the Forum
Just as a general rule of thumb, OS-X needs something like 10 to 15% of your drive kept free of OS use. So if you have a 60 GB drive, you will need something like 6 GB free JUST FOR THE OS! That's why I said you need to freeup about 10 to 20 GB.
The problem first occurred on the external hard drive (Western Digital)
What is the format on this drive? They usually ship with a Windows format and need to be reformatted to a Mac format to work well with all things Mac OS-X.
F Shippey

IMovie hangs at Encoding Audio

Is it normal for iMovie 6 to "hang" when it is going through the "encoding audio" portion of a burn? Each project I've done has the "spinning beach ball of death" during the process. Anywhere from 30 minutes to an hour. The last project I tried to burn I aborted after 90 minutes.

Hello, tarkin,
You are correct....many posts in iDVD over the past regarding the lengthy audio encoding. I think it is a concern mostly because it LOOKS as if nothing is happening for such a long time. And, of course, your own system configuration makes a lot of difference. I have learned over the past 3 years that with my G4 iMac and 512 RAM, it will take about 12-14 hrs for a nearly 2hr movie to finish encoding and saving as disk image. I burn from Disk Utility and after the encoding is done, the burning seems to be very quick.

IDVD does crash when encoding audio

I have been reading a large number of posts regarding iDVD freezing, having a spinning beachball, and hanging while encoding audio. I have not been able to find a post where it discusses the crashing/unexpected quitting of iDVD. I have tried a couple of times to get the burning process started, as I thought it may have been a small glitch, but to no avail.
Should I follow the steps marked out in:
http://discussions.apple.com/thread.jspa?threadID=335417&tstart=30
I usually complete the final process of iDVD with all Energy Saving and Screen Saver preferences set to "Never". I usually would delete encoded assets, but I did not have time before I went to work to try a third time.
This is the first time it has happened to me and I have completed about three projects successfully since updating to iDVD 6.0
Thanks in advance for your assistance.
Rodger

SUCCESS (But it took a while!)
When I arrived home form work, the first thing I did was to remove Flip4Mac using its uninstaller. This had no effect. iDVD still crashed bringing up the crash report dialogue box.
So I followed the instructions from http://discussions.apple.com/thread.jspa?threadID=335417&tstart=30
I also repaired permissions (nothing to report there) and deleted encoded assests. Finally, I replayed my DVD project in the iDVD's preview/test section. The audio was out with the video. For some strange reason, my brain told me that the syncing between audio and video was the main thing to blame. So, I had a quick think and decided to remove all the fade ins and fade outs from my original iMovie project, remove all chapter markers, save the project, replace the chapter markers and then open the original iDVD file shared from this iMovie project. Then, clicked OK to update file to match, deleted encoded assests.
I do not know which part worked for me, but I woke this morning with a completed DVD (which is still to be tested in a DVD player).
Thanks for all the assistance and advice, I'll keep this post unresolved in case someone else has a full crash of iDVD.
Rodger GW
PS I think Apple are a little sick of seeing my crash report coming through with the answer to "What were you doing when the application crashed?" being "Just trying to encode audio!!"
RGW

Help.....IDvd Burning is Stuck at encoding audio

Buring idvd and its stuck at encoding audio. - what should I do???? Afte spending so much time on this.
Very dissapointing its taking very long much longer that idvd4. Purchase upgrade for improvement not for headaches.

I'm not near my Mac right now, but I think its in the project info window. I believe it comes up when you 1st ship your movie to iDVD. There is a a drop down style menu with 2 choices. I do not know if you can change this setting once you are past it. You may have to re-enter iDVD through iMovie and start over.

IDVD freezes when encoding audio

Whenever the project is done encoding the video, it freezes right when it gets to the encoding audio process.

for over 10 hours
New info...
I would suggest Sharing as QuickTime Full Quality and drag that file into a new iDVD project, then create a disk image and then burn. If you have chapter markers, they will be lost. Import that file into a new iMovie project, add chapter markers, send to (new) iDVD project.
File/Save as Disc Image...
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

IDVD freezes when encoding audio for "processing movies"

what's wrong?

Hello Dafire,
maybe this:
Issues with iDVD 6.0.2, iMovie 6.0.2 and MP3 files - encoding audio hangs
http://discussions.apple.com/thread.jspa?threadID=494268&tstart=0
or check here:
MP3 Causing Trouble
http://discussions.apple.com/thread.jspa?threadID=501555&tstart=0
hope this helps
mish

IMOVIE 6 won't recognize DV camera while IDVD is encoding or burning

I am in the process of encoding and burning a dvd in idvd 6. Given the length of this process, I want to also import some video into an imovie 6 project. However, while idvd is encoding, imovie won't recognize my camera.
I understand I can stop idvd, but then will I lose the encoding that has already occurred?
Will imove recognize the camera if I launch idvd after beginning the import into imovie?
Is there a software fix that will prevent idvd from monopolizing the firewire port when it is just encoding video from an imovie project?
This is a very irritating conflict given the time encoding takes in idvd.
Thanks,
Knapper
Dual 1 GHz PowerPC G4 Mac OS X (10.4.5)

As Sue suggests, it's not surprising that iDVD doesn't want you to access the camera with iMovie. It's not unusual for applications that perform FireWire-intensive functions—as both iDVD and iMovie do—to want to control the device. If iDVD can't control the camera, it may not be able to perform a task you want it to do. (Remember, iDVD offers several camcorder-dependent functions, including OneStep DVDs.)
While it may be a bit treacherous, you CAN go behind iDVD's back to get it done. The trick is to grab control of the camera before iDVD does. So Quit iDVD after you create, then save the iDVD project, then grab control of the camera with an iMovie HD project, THEN re-open the iDVD project and start encoding. (I tested exporting the iDVD project to a disk image, which is probably safer than burning a physical DVD. Use Disk Utility later to burn the disk image to a physical DVD.)
The iMovie video looked fine here, but your mileage may vary.
Karl

IDVD freezes during audio encoding

Hi there,
I'm trying to burn a movie (over 90 minutes long) and everything goes well until it begins to encode audio (last step but one) - the application freezes without any apparent reason. I've tried it 3 times already and always the same.
I'm on a brand new MacBook Pro with standard configuration (1.83 MHz, 512 MB RAM). Any ideas as what needs to be changed tweaked?
thank you,
Pablo

Yes, it is 16 bit. What's more some other strange thing happened: I had some 59 MB free on my hard drice. I imported some 27 MB of video and started working on it and after doing a bit of editing decided to go to iDVD and burn a DVD (actually I wanted to save an image so I can burn it faster on my external burner). The iDVD file was slightly over 3 GB - now it's removed since creating the DVD failed miserably. So I did quick math: 59 - 27 = 32. That's how much space I should have available on my hard drive. But guess what? It's only 15 GB left there. Somehow 17 GB gone missing!!! How do I get it back? I'm really afraid of trying iDVD again as making another DVD can render my MacBook Pro unusable...
Please, help!
Pablo

Idvd freezing before it starts encoding audio

Hi everyone, i was wondering if someone could help me with a problem i'm having with idvd. Everytime (6 times so far) my dvd is encoding the video it will suddenly freeze just before it starts audio encoding. What does this mean and is there any way to prevent it?

This question is frequently asked!
iDVD is probably not 'hanging'. Disregard any messages that iDVD is not responding. It is. Do not force quit.
Encoding audio is the slowest part of rendering, and can take many hours. Great patience, even an intermittent alternative hobby, is called for.
Make sure no other application is running, make sure you have not set the hard disk to go to sleep and that the screen saver will not come on. Leave it overnight, or have a 36 hole game of golf.
Sooner or later iDVD will finish!

Can't import to iMovie when iDVD is encoding/burning...Any Ideas?

When I am burning/encoding in iDVD, iMovie will not let me import any video. I am connected, via firewire, to a Sony VX2000 camera, and I have had the problem ever since I upgraded to the newest iDVD and iMovie software. It says Camera Disconnected or Off, and it disables the import button.
Any ideas?

When I am burning/encoding in iDVD, iMovie will not
let me import any video.
I guess I'M not surprised! During burning/encoding in iDVD there is a whole lot of computing and disk access going on. Our normal advice in the past has been to simply walk away and stop using your computer during burning/encoding. I CERTAINLY wouldn't try to import video from a camera.
Creating DVDs requires lots of patience (and free hard disk space).

IDVD-IMOVIE - encoding audio

Similar Messages

Maybe you are looking for