IDVD is giving an error during multiplexing or it will force close while burning. Please help!

I've been using iDVD to burn videos for awhile now. This time around it is either force closing while burning or near the end it gives a error while multiplexing and will not continue. Is there something I can do to fix this? Or another program I can use to burn the videos to DVD.

Read Bengt Wärleby's post in this topic for possible causes: Multiplexing Error: Apple Support Communities.
Also follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Similar Messages

  • Error message while burning/ please help!!

    I am getting an error message when I am trying to burn a dvd this is probably the 10th movie project I have made into a dvd, never had this problem. Here is the message:
    There was an error during rendering/encoding of the menus/slideshows. The burning process has been cancelled.
    Please help i need this dvd by 2pm tomorrow.

    I know you said you have made slideshows before, but does this article have anything that applies to you?
    http://support.apple.com/kb/TS2303
    I hope this helps.

  • HT1645 whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing.  I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

    whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing.  I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

    Welcome to the forums.
    Looks like that error message does refer to encoding (see http://support.apple.com/kb/HT1645) but a problem could be that your video has to be reloaded into iDVD if you started the encoding process and then switched settings.  You could start a new iDVD project, or try deleting encoded assets.
    Let's start from the beginning -- what length of video are you trying to fit on the DVD? (this will indicate what encoding options you have).  Double layer DVDs can be finicky and are used for video more than 2 hrs long.
    Use good quality media -- Verbatim is often recommended around here, and I've used Sony DVD-R with good results.
    For a detailed treatise, see:  https://discussions.apple.com/thread/3926901?tstart=0
    John

  • Firefox user when i try to access my gmail,orkut and yahoomail i get this error message Error code: sec_error_expired_certificate All the other sites are working fine please help Plugins installed:

    Firefox user
    when i try to access my gmail,orkut and yahoomail i get this error message
    Error code: sec_error_expired_certificate
    All the other sites are working fine
    please help
    Plugins installed:
    == URL of affected sites ==
    http://

     Hi,
    One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
    I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
    Any idea how can this problem be solved?
    It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
    Thanks

  • Error 2755 when trying to install itunes on my laptop please help

    error 2755 when trying to install itunes on my laptop please help
    the installation process gets so far then the error 2755 appears saying that it cannot be installed

    Hey AJS4862,
    Thanks for the question. If I understand correctly, you are having trouble installing iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    Issues installing iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • I just bought a iphone 3gs from my friend. when he gave it to me it was in recovery mode. Now everytime i try to Restore it i get the error 1603. is there any way to fix this ? please help !

    I just bought a iphone 3gs from my friend. when he gave it to me it was in recovery mode. Now everytime i try to Restore it i get the error 1603. is there any way to fix this ? please help !

    iOS: Unable to update or restore
    Are you sure your friend didn't jailbreak it?
    If so, save yourself a lot of time and trouble - throw it in the trash.

  • HT3743 my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

    my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

    If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808

  • HT204291 Error Message: "airplay tv is in use by someone else" Please help?

    I.m trying to use Airplay Mirroring to stream content from my iPad 2 to my HDTV.
    Already using Airplay TV successfully to stream content from my iTunes library using the Remote control but now I want to add my iOS devices but I'm getting the following conflict / error message when I try to turn mirroring on on my iPad 2:
    Error Message: "airplay tv is in use by someone else"
    Please help?

    Set a password by using the "Airport Utility", then it will work again.

  • I am trying to sync my music from my computer to my iphone 6 but my computer keeps bringing up an error box "computer not authorized" but it is authorized. Please help!

    I am trying to sync my music from my computer to my iphone 6 but my computer keeps bringing up an error box "computer not authorized" but it is authorized. Please help!

    I have a pc and am trying to get my music through my iTunes on my computer.  I didn't have any trouble syncing my iphone 5S but can't get it to sync with my 6. OS 8.1.3
    I open iTunes on my pc, plug in my phone, then I click on the picture of a phone on the upper left hand corner of my music library. Then I get a box of options with sync at the lower right.  I have clicked "automatically sync when phone is plugged in" and have also tried to do it manually by checking specific songs and albums.  Every time I hit sync the box pops up that says, "The iPhone could not be synced because this computer is no longer authorized for purchased items that are on this iPhone.  To authorize this computer for items purchased from the iTunes store choose Store>Authorize This Computer."
    I took those steps and a box pops up that says "this computer is already authorized."
    I have my recently purchased music on my phone that came through the cloud when I restored my phone. But I want my old music from CD's that I put on my iTunes library in my computer.  I had all of this music on my old phone.
    Thank you so much for your time!  I'm obviously not very good at this!

  • I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?

    I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • I have tried multiple times to install CC and muse only getting blank creative cloud screen (no error and in serious pain in the butt to uninstall) PLEASE HELP!!!!!!

    I have tried multiple times to install CC and muse only getting blank creative cloud screen (no error and in serious pain in the butt to uninstall) PLEASE HELP!!!!!!

    Geekysmooth please try the steps listed in Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html to resolve the current error which you are experiencing.

  • My iDVD always says "it was an error during the movie encording" and it suddenly stops burning idk what to do!

    Ok so i'm trying to burn a short 10-min-long film to a DVD via iDVD.... i've worked with it before and never had any trouble.
    But i havent used it for 3 years now probably, and as i made the DVD menu and sub-menus for this project i worked normally
    as i always did, it was easy and everything worked just fine.
    The only difference this time is when i click "burn" it starts processing the menus but when it's done, instead of going to the next step which is
    processing the slideshows, it automatically stops the burning and it says "there was an error during movie encording" idk why it always comes out,
    what i'm doing wrongor if it just doesnt work anymore :S it also opens a new mini window that says "you have insterted a blank DVD.
    Choose an action: (open finder) (open iDVD) (open iTunes) etc" so this tells me it's reading it...
    i've picked all the options and it still doesnt work with any of those at this same point. I've also tried changing the preferences, the screen mode,
    the video quality, EVERYTHING! nothing works! DX
    anyone knows how to fix this?
    it'd be truely appreciated!!!
    Yours Truely, DANIELLA.

    So today, I deleted that original file (this gave me the ~18.5 GB free) off my internal HD and tried to burn the project.
    So the DV file iMovie is using is on the external again? If so I assume iDVD knows that...
    Have you tried making a disk image?
    Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
    http://docs.info.apple.com/article.html?artnum=164927
    This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
    There are variations to this process based on which OS X you are using...
    Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
    -->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
    Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
    http://docs.info.apple.com/article.html?artnum=93006
    You could go to the iDVD 5 group and search the group for that error code. There was plenty of those there. Not much here.

  • Trying to burn my project to a DVD using iDVD, but keep getting "Error during rendering/encoding of the menus/slideshows. The burning process has been canceled." How do I fix this?

    Just mad a movie and trying to burn it to a DVD but keep getting an error message.  It reads:
    "Error during rendering/encoding. There was an erro during rendering/encoding of the menus/slideshows. The burning process has been canceled."

    Enable Show TV Safe  Bengt Wärleby  lists items to consider about encoding issues in this topic:  Multiplexing Error: Apple Support Communities
    OT

  • Crystal report PLD giving dump error during preview

    Hi,
    I have developed a Crystal report PLD for A/R Credit Memo (RIN1). It is working perfectly while running from Crystal report interface. After importing the same from Report and Layout Manager in SAP, while trying to view the preview it is giving dump error. Can anyone help me out in this regards.
    Thanks in advance.

    Hi,
    Check SAP note:
    1562837 - Previewing/printing some Crystal Reports layouts crashes
    B1
    Thanks & Regards,
    Nagarajan

  • 6.0.3 Error During Disc Initialization for both DVD+R and Disc Image - Help

    I've been a mac user for a few years now, but I just bought a new MacBook, and my first superdrive! I'm all excited to test out the new hardware along with iDVD.
    I've made a rather simple DVD setup and the first time through it was encoding for about an hour and then it gave an error message which I don't recall other than it mentioned QT7. I ran updater, no new updates that I needed and I tried again, and from then on I've been getting the Error During Disc Initialization message when burning to my DVD+Rs or when I try and save as a disc image (yes, I've deleted the encoding assets). I have about 20GB free on HDD, and I'm trying to burn approx. 100min of video. I've rebooted multiple times, and I've remade my project a couple times but no dice.
    Any idears?
      Mac OS X (10.4.8)  

    What hardware do you have???
    You didn't answer Sue's question about free space on
    your start-up drive. You should have 20GB+ free.
    What are you sending to iDVD?
    Verbatim DVD-R, not DVD+R, are very reliable, unlike
    TDK and Memorex.
    Also look here:
    http://docs.info.apple.com/article.html?artnum=302925
    I am running on a 2.0 ghz MacBook with a SuperDrive using Sony DVD+R. I will definitely pick up some Verbatim DVD-Rs though to see if that makes iDVD happy.
    I have cleared up some room and now I have around 50GB free.
    I am trying to make a DVD of two seperate .mp4s of a soccer game. I have 3 pictures and two buttons.

Maybe you are looking for

  • New Branch Office - High Security

    Hello we plan to have 5 branch offices each with around 40 users. All branches will be in different geographical locations. Best Security needs to be implemented in all branches. All services email, SAP, Portals are hosted in the HeadOffice Datacente

  • What's wrong with my iPod.  The battery is on the fritz!

    I have an iPod Mini 2nd gen I'm not really sure how to describe what my iPod's doing, so I'll just describe what today was like. The iPod was fully charged when I left for school this morning, but died after 3 minutes of listening to an audiobook. I

  • MacBook Pro (13-inch, Early 2011), Samsung 830 stopped being identified

    OK I give up, i have been using a Samsung 830 256Gb SSD in my MBP for almost 2 months and all of a sudden it stopped working. I have installed the SSD into a PC and it identifed fine. I installed Windows 7 on the drive and then installed the Samsung

  • Texting no sound sending and recieving...

    Why is it when I send a text I don't hear the sound or when recieving text.

  • Can't add Epson printer

    I'm using an Epson Aculaser 1900 which worked fine until upgrading to Leopard (clean install on a new harddrive). It's connected via Airport Extreme and is assigned a static IP address. I've tried the drivers installed by Leopard which didn't work at