IDVD just freezes when burning my DVD

I don't get it! Everytime I try to burn this thing, it encodes it forever, and then the spinning beachball comes up. This continues FOREVER. I hit ctr-apple esc and it says "Not responding"
Can anyone tell me what is going on and how I might be able to get this working?

then the spinning beachball comes up.
During audio encoding?:
http://docs.info.apple.com/article.html?artnum=302988

Similar Messages

When burning a DVD from Elements 13, it freezes at 90%

when burning a DVD in elements 13, it freezes at 90% and locks up elements until I cancel burn.

Jerry Jarrett
If you wish to pursue your question about burn to disc, then I would be glad for the opportunity to be of assistance.
The following would be my troubleshooting strategy and questions
1. What computer operating system is your Premiere Elements 13 running on?
2. Have you looked at the issue with and without the Intel HD Graphics 2000 and Higher preferences disabled
(See Edit Menu/Preferences/General)?
3. Where are you in Publish+Share/Disc/, DVD, AVCHD, or Blu-ray? And, what does the burn dialog's Quality Area
show for Space Required and Bitrate? What brand/type/capacity disc are you using?
4. Is the issue specific to one Timeline in one project? Or, is the problem there with another Timeline content and another
project.
I would prefer to see you sort out the burn to disc issue if possible because of the download problems associated with the 3rd party software
that is typically needed to obtain the disc product from the Premiere Elements VIDEO_TS, BDMV, or ISO Image. Excellent 3rd party software if you
can get it installed without a lot of companion garbage. Although how to have been described for the safest possible download and install, there
are no guarantees that you will not be hit with a lot of computer cleanup just to get one excellent program.
ATR

Does anyone experienced bad quality when burning a DVD?

Does anyone experienced bad quality when burning a DVD?
Using OS 10.6.8 and Magiv Video in iDVD, I am having a hard time creating a decent DVD. The videos per se are fine, but the intro menu and menu text and images are extremely poor quality and hard to read. What is going on?

Hi my notes on this - might be of help
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser and as Large (NOT HD or other resolutiona as result will suffer) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Will stacks show in pic's when burning a dvd?

Hi all, just wanted to know if the stacks in my pic's will show when burning a dvd. When I fix red-eye or auto smart fix it shows the stacks on my pic's. I don't want the stacks to show when burning the pic's on a dvd.
Thanks, alot

> When I fix red-eye or auto smart fix it shows the stacks on my pic's
My guess is that what you are referring to as "stacks" is the icon superimposed on the thumbnail to show that this photo is part of a Version Set. This icon is present over the thumbnail, but it is not in the photo itself. No, it will not show on the photo file that is burned to a DVD.
You did an auto red-eye and an auto smart-fix. These create Version Sets where they save the file of your fixed photo separate from the original photo file so that your original is preserved.
I think my description answers Colin's question of "what do you mean by stacks showing?" If not, tell us what you did mean.
Then please do answer the question of specifically how you plan to Burn the DVD.
Barb O

How can I increase resolution when burning a dvd with elements 11 premiere

How can I increase resolution when burning a dvd with elements 11 premiere
I am trying to generate a slide show DVD....the pictures on the TV are poor quality

Welcome to the forum.
As Steve points out, a DVD-Video is set in resolution, to 720 x 480 (for NTSC), in either Standard 4:3, or Widescreen 16:9. That is as good as it can get, and is not a limitation of PrE, but of the DVD-Video specs, which were written a long time ago.
The best that one can get is to play that DVD-Video on an up-rezzing DVD player, or most BD players, that also have up-rezzing, to an HD TV monitor. Those players have dedicated chips, JUST for up-rezzing.
Then, and per Peru Bob's questions, I attain the ultimate Still Images to DVD-Video, by doing my Scaling in Photoshop, and using either the Bicubic Sharper, or Bicubic Smoother Scaling algorithms. I Scale my Camera RAW Images to match my Project's Frame Size, and Crop, where necessary to match the Aspect Ratio of my Images, to the Aspect Ratio of the Project, i.e. if going to a 16:9 Widescreen, I will lose some pixels top and bottom, but I account for that, per my asesthetic.
Note: some PrE users insist that the Scaling in PrE is as good as Photoshop's, but my critical eyes point to using PS. Also, I do NOT use JPEG, which is a lossy, compressed format, and will Save_As PSD from Photoshop, for ultimate quality.
Good luck, and please let us know the pixel x pixel dimensions of your Images.
Hunt

After using iDVD, can my iMac burn a DVD ?

After using iDVD, can my iMac burn a DVD ?
I mean how do I know whether my disk drive can write/burn DVD ?
Mine is a 24" iMac bought some 5 months ago.
Thanks

Assuming your mac has at least 25 GB's of available hard drive space on the boot volume and an S-Drive as opposed to a combo drive; the latter only reads dvd's while the former both reads and writes to dvd, then you should be able to, yes.
But follow the iMovie> iDvd Tutorial/s first.
http://www.apple.com/ilife/tutorials/?cmp#idvd
Hope this helps but if not just come on back. Good luck.
Message was edited by: SDMacuser

FCPX: changing the resolution preferences when burning a dvd?

FCPX: How do you change the resolution preferences from 720 to 1080 when burning a dvd?

DVD standard is 720X480, which is why you don't have a resolution choice.
Russ

I can't load iOS 8.1.1 on an iPad...it just freezes when I hit "Agree"

I can't load iOS 8.1.1 on an iPad...it just freezes when I hit "Agree".
Also, trying to recover iCloud password, but when I go through the process it says an email was sent...somewhere...but it isn't in normal accounts, so am stuck. Arrrgh.

I can't load iOS 8.1.1 on an iPad...it just freezes when I hit "Agree".
Also, trying to recover iCloud password, but when I go through the process it says an email was sent...somewhere...but it isn't in normal accounts, so am stuck. Arrrgh.

When Burning a DVD from IDVD it does not encode Video

I am having trouble burning a DVD that will not freeze. All of them come out and are read by DVD players of all kinds, but it gets about 3 minutes into the video, and it freezes. I saved as Image to Disk, and it went through the Burning process flawlessly and played through in its entire contents, but then when I tried to burn it to a DVD, it made the menus fine, but when it came to encoding the video, it skipped that part and went straight to encoding audio and it did not work. It came out with just a little video on there, but it did not use the same process as the Save Disc to Image did. When I saved Disc to Image it played through the whole project in kind of a slow motion. The Burning to a DVD did not do that at all.
Please HELP!

I do not have 20gb free on my start up drive. I will once I delete the bulk of the project. How can I save the project to make sure that when I delete the big project, the parts that I have edited and want to not get deleted?
As for my Imovie, It is a 22 minute long home video that does include 5 chapter markers, including the one that starts the movie from the begining. There is music for every clip from my itunes. The theme i chose is the first one listed on the list. It starts in from the right side, and then scrolls across at the top. All of the menus work fine when i play my burned DVD. In fact, everything works fine except for that one part when it freezes up.
I do not understand what you mean by adding my movie to a drop zone and not to the background. The way i started it on Idvd was by clicking, create an Idvd from the menu on imovie.
I made a new step of progress and i got the encoding of the video, but it still did not work. It froze at 3:03 instead of 3:27, 3:38, or any of the others. This is the second disk i have made though that will play on my Powerbook. It freezes on everything else though.

Sound problems with film made in iMovie when burned to DVD in iDVD

PLEASE HELP!!!
I have upgraded to iLife 09 and for all the bad that people have to say, I actually like it a lot. Anyway, it gave me the encouragement I needed to play with some old home movies I had stored with the aim of producing DVDs to give to my friends, and hopefully showing off the slick production values I have come up with.
So after spending a week getting to grips with iMovie and editing an old holiday film with all the cuts, transitions, chapter markers and music etc that I wanted, I ended up with an hour long movie that I was happy with.
Then to iDVD. After trying out all sorts of ways to go from iMovie to iDVD to ensure the best quality, I have finally given up trying to replicate the on screen quality of the movie in iMovie with the finished DVD, and just opted for the easy to use 'share to iDVD' option. The quality is not great, but then the footage is old anyway so not too much of an issue.
Then I spend another few days playing with and learning iDVD and again end up with a finished product that I am happy with, with nice looking menu's and a slideshow etc.
So I come to burn the final DVD, for which I pick the 'Professional burn' option which takes 4 hours but I am happy to wait if it means the best quality possible, and my DVD is done.
I then play the DVD to discover my problem - the sound in the movie is not right. To explain further, in my movie I have reduced the sound of some of the film clips to nothing and placed music over the top. When played and previewed in iMovie it works fine - the music plays and the sound that is attached the the video does not. When previewed in iDVD it works fine - just as I had edited it in iMovie. But then when I burn the DVD, some of these sounds are present again which completely wastes all my hard work at the editing stage.
I have searched and searched for help on this but am unable to find any.
Sorry for the very long description and story behind my issue, but it is massively frustrating. Basically, at some point during the 'burn to DVD' stage in iDVD it decides to completely ignore most of the sound edits I have made on the movie in iMovie.
If anyone can help it would be much appreciated.
Many thanks in advance.

Many thanks. Looking at that thread it looks like there are a few others having the same issue as me. Might be to do with not using the predetermined rates for clip slowdown and inputting my own.
The frustrating thing is that I have only done this once right at the start of my hour long movie and if I change it now it with though the timing of my whole film out.
Not much else I can do though I suppose.

HT1583 When burning a DVD of photos and music from iDVD, the photos blur right before the transitions and the music has about 5 second glitches here and there before the music starts again. Is there any way to burn the DVD without this happening?

Each year I am in charge of making a slideshow of photos and music for my annual company meeting. I always use iDVD to set up my photos and music and then burn the DVD to play at the meeting. Every time I burn the DVD, it blurs right before the transition of the photo. It has always done this and I'm not sure why. It will also make the music glitch in a few spots for about 5 seconds or more. If I burn another DVD to try it again, the glitches will still be there, but in different spots. I've tried the highest quality of DVD's possible and this still happens. What can I do to fix this problem?

Try disabling transitions altogether!
There is a technical reason that this breakup happens - it is to do with how slideshows can be saved within the DVD specification, they can either be recorded as 'video streams' or as a collection of 'still images'.
When you add transitions iDVD has no option but to use a video stream, this can result in terrible 'breakup' because the mpeg 2 encoder isn't designed to handle scenes that are static with a sudden short change. You can see 'artefacts' in the video stream…
https://en.wikipedia.org/wiki/Compression_artifact
'Still image slideshows' avoid the issue altogether by only showing a static image, no video compression is used & because the scene doesn't transition so it shouldn't breakup.
NOTE: Music on the slideshow is irrelevant, both types can use a soundtrack.
I cannot remember if it is possible to force iDVD to only make still image slideshows, I always use DVD Studio Pro to correctly setup DVD's. I'd suggest you use the option to save the DVD to a disk image & then open that disk image so that DVD Player can preview it, that should save on the number of test disks you burn.
If you cannot make it avoid using video streams you may be ether off making your own video slideshow in iMovie & then import that into iDVD. It may eventually look better despite being a video stream!
iDVD isn't really condusive to professional levels of control.

IDVD video encode error when burning to DVD

I am trying to burn a new copy of a project I successfully burned to DVD 2 years ago. I have not changed the source material. After the menu renders and video encoding begins I immediately get an error message "video encoding error." There are no menu warnings. All video is successfully previewed. Nothing has changed from the previous burn. The project info box shows all video and audio properly encoded and present.
What gives?

The way from FCE or FCP has been the same for me for lot's of years since FinalCut 1.2.5 I think (was no Express or Pro then)
And QuickTime Conversion never worked for me - I guess You were lucky two years ago.
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Just double click on the Hard Disk icon (top right on DeskTop) and read on bottom part of this windows frame e.g,
( in English - 1 of 14 selected, 38.24 GB FREE)
Encoding
• I use Pro Quality encoding if material (video + menu) exceeds 40 minutes ! if less I use Best Performances
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1) - BEST IS NOT BEST at all only fastest and results in Maximum amount of BURN ERRORS !
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Error #-34506 when burning a DVD from iDVD 5.0.1

Hi everybody,
Everytime I try to burn a a finished iDVD project (a big QuickTime movie), I get a message : "There were errors while multiplexing and burning", error#-34506. In reality the project wasn´t burned, the DVD is empty. When I burn a short slideshow - no problems. I tried different manufacturers of DVD-Rs to no avail.
Any help will be greatly appreciated.
PowerMac 2GHz DP, 39 GB free harddisk space, MacOS 10.4.2, iLife 5, newest updates
Regards, Adam

I have the exact same problem. I am running a brand new iMac G5 2ghz with 10.4.2 and iDVD 5.01 and QT 7.03. I have tried it by importing my DV and MOV files into iDVD. Same failure with differnt media, even skipping one clip that I thought might be problematic.
Have further tried it with different compression settings in preferences... high quality vs. high performance. Same error.
Imported movies into iMovie and tried to run iDVD from there.... everything crashed. After a reboot, tried it again, and this time at least got a description of the error... something to the effect of "there was burning error but the disk has been untouched and can be reused, please try again..."
Am no trying to reimport clips into imovie, and export as one movie in both DV and MOV formats, to try it again..
Apple help couldnt even find the error number much less offer any other help..
IDEAS??

IDVD 08 freezes when launched

I'm having a strange issue that seems to have started just after the most recent apple update. Before the update, I was able to launch and burn a DVD without any trouble. Now, when I try to lauch iDVD, the icon bounces for a while, the iDVD menu appears, but it's frozen an unclickable. the iDVD window does not appear at all. I let it sit for 10 minutes, but nothing happened. I end up having to force quit.
iMovie launches without any trouble, so the entire iLife suite isn't toast.
Ideas? Thanks

Try these few troubleshooting steps first and then post back .....
1. Drag and drop this item/s to the trash and restart your mac.
com.apple.iDvd.plist
2. Repair Permission from apple's disc utility.
3. drag the icon for iDvd on the dock to the desktop.
4. open the applications folder > iDvd and double click. This should launch the app. But if it freezes again then force quit.
5. If nothing above helps, the try a separate user account and launch iDvd from said account.
6. Still no good? ..... then let's also reset the pram. It's worth a try I think. (Hold down P + R + Option + Apple keys all at the same time as you restart your mac). Wait for the second chime and then release the keys.
7. Now try iDvd. Any luck?
Good luck and I hope this helps but if not just come on back.
Message was edited by: SDMacuser

IDVD 09' Freezes when writing lead-out.

Everything seems to work fine until it gets to "writing lead-out" it then seems to freeze up, after about 15-20 minutes it will eject my dvd disc, the screen stays the same as if it's still writing the lead-out. When i play back the dvd disc it stops playing about 1 minute into the movie. but if i play the copy on my hard drive (the one i'm trying to burn to disc) it works fine. Any ideas? Thanks for your time.
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.5 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B03

Hi DJHYPE
Welcome to apple discussions. Sorry to hear you are having troubles burning to Dvd-R.
Suggestion: Let's narrow things down a bit. Try burning a disc image first to the desktop. You can do that from the file menu within iDvd. Next I'd like you to test the disc image with apple's dvd player app. Assuming it plays as expected, then burn to Verbatim, Maxell, or Tiaiyo Yuden at 4x. Please avoid Memorex while trobleshooting. Thereafter / once we have the issue resolved, feel free to burn to whatever media works best for you and your mac.
http://support.apple.com/kb/HT1583?viewlocale=en_US
Hope this helps but if not just come on back.
Message was edited by: SDMacuser

IDVD just freezes when burning my DVD

Similar Messages

Maybe you are looking for