Idvd made dvd keeps stopping in domestic dvd player

I've made some dvds for my kid's school using idvd on my macbook. They play fine on the macbook, but when they are used in domestic dvd players, they stop. Sometimes they pause on a picture and start back up and other times it stops and comes to a blue screen. On the dvd player, you can't skip, or press any buttons. It's very frustrating because everyone wants to see the entire dvd.
Help!

How many times have you burnt it?
Has your burner ever worked before?
You might want to change your burn speed. What speed is your media?
16x, 8x, 4x...
You might want to get some slower media, 8x or 4x.
One other thing you might try is using Disk Utility to try and repair it.
I'm not an expert, so these are just educated guesses.
Hope this helps.

Similar Messages

Discs made in IDVD causing DVD player to crash intermittenly

Hiya
I have designed a DVD in iDVD, using a standard theme, Reflection White. There are 6 links to video from the main page, and one link to a slideshow. There are no submenus.
The DVD plays fine in the simulator. My footage is just over an hour, so I've been using Best Quality as the encoder. I then burn a disc image, and use Toast to burn the DVD - at 2x speed - on my Macbook Pro, latest model, running Snow Leopard.
Mostly, these DVDs work fine - though the transitions from the menu page to the videos can be choppy - an image is meant to slide fully off the screen and it sometimes freezes right at the end before going to the video.
However, the DVDs intermittently crash DVD player - almost always at the transitions between the menu and the assets.
It's not the DVD itself - because the same thing happens with the disc image. And even weirder - if DVD player crashes, and then I re-open it, and play the exact same point on the disc image or DVD, it usually plays fine.
The DVD and disc image play fine on VLC (though they tend to have interlacing issues - my footage and format is PAL).
I'm currently experimenting with different encoding qualities, but no luck yet.
Anyone have any suggestions about this problem?
Thanks

Also, in case it's helpful, the original footage is edited in FCP Studio and output as .mov files, self-contained, and then imported into iphoto and then into iDVD - I couldn't seem to get iDVD to recognise the clips if they weren't in iphoto.
Can it be so that You also Exported with QuickTime Conversion. I don't.
DVDs - Can only be SD-video - there are no HD-version at all any where (any more)
If You need higher quality than Blu Ray is only disk format avail. as I know of.
• Need of eg Roxio Toast™ incl BD-component, BD-burner AND BD-Player)
(No standard Mac can playback Blu-Ray)
Yours Bengt W

No video when playing disc burned from iDVD on DVD player

I've tried for the first time to burn a DVD (TV shows purchased on iTunes) and followed the directions from the iDVD help guide, but when I try to play on my external DVD player there's no video, only audio. I saw a couple posts where people had video and no audio, but not the opposite. How do I resolve? I'm using Memorex DVD-R discs and am not very technologically savvy.

Hi fitzmonster
Welcome to apple discussions. Just to add to the already good advice mentioned above. I do have a question. By any chance are you using Memorex Dvd's? If so, it simply adds one more variable to an already bad equation. Try Verbatim or Maxell instead.
Given the lack of recent updates to iDvd, seems to me Apple is currently focused on streaming content from your Mac to your TV thru such products as iTunes and their latest AppleTV. iDvd doesn’t always fit into this mix. In comparison, iDvd is dated / old technology centered entirely on standard definition TV. Their latest AppleTV is well beyond this.
Also there are many products out there that work rather well together and may be better matched on your mac other than iTunes, AppleTV and iDvd. One must keep in mind that iDvd is not really intended as a general purpose burn utility. Toast may be a better choice here but neither iDvd nor Toast will circumvent DRM.
So the question we need to ask is, How well do all three apple apps / products mentioned above play together? Are they in harmony? IMHO the answer is no .... mainly because iDvd is rather dated technology. Hence, as a consumer I do think it's smart to look elsewhere / at other products /options if the intention is to burn TV Programs to Dvd-R ... as opposed to streaming content from a mac to your TV or iPod.
Like I said, Roxio Toast is a reasonable choice but Elgato combined with EyeTV3 software is even better one. It's better because it’s written and built around recording TV shows / programs. That and it's not limited to iTunes.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

How to convert VCD files into readable format on iDVD, iMovie, DVD player

I found a bunch of old VCDs that I want to convert so that I can use them on iDVD, iMovie. What is the best free converter and would appreciate any tips as to the best way to reduce any loss of resolution. I tried last year converting thru mpeg streamclip and the movie came out pixelated in .mov.

ffmpeg might be very difficult to install and use, but not FFMpegX. FFMpegX takes ffmpeg, adds a very simple Mac OS X UI on top, and packages it as an application bundle. No files to put in strange places, and simple to use.
I highly recommend it. It comes preconfigured with setting for common file formats and automatically recognizes the input format. You can simply tell it to convert a directory of files from whatever format they were in to H.264 QuickTime movies and it'll do it.

Disc I Made With iDVD Will Not Play Back in DVD Player

I used iDVD to burn DVDs I made with iMovie. The DVDs play back without problem on my home DVD player, but when I try to play them on my Mac G5, the computer keeps ejecting the discs. How can this be? Sureley the discs are compatible with my system or they would not be burnable. Please help!

Hi r
No this is an often described problem.
To make a DVD playable to as many devices as possibly there are some alt ways
to go,.
1. From iMovie to iDVD: I don't use the Share/Export to iDVD from within iMovie.
I drop my movie project icon (with a Star on it) into the open window in iDVD.
2. After done necessary adjustments I go to File/Save as a Disk Image.
3. This disk image I burn with Roxio Toast™ but You can also use Apple Disk Util tool.
4. AT AN AS SLOW speed as possibly eg x1, x2 or x4 => Less errors in burn process.
5. I use Verbatim DVD-R. There are other High Quality brands - this I use.
DVD+R or +/- RW I don't use !!
This DVD should play on nearly all devices.
Yours Bengt W

I have a brand new iMac that does not have iDVD. Made a move on iMovie installed a 3rd party burn prog. but DVD won't playback on my regular dvd player. Need to burn one that will. Help!

My new iMac did not come with iDVD as they are not using iDVD any longer. I made a movie that I needed to put on a DVD that would play on any external DVD player. After calling Apple twice, they recommened a 3rd party program so I downloaded "Burn-osx" and made the DVD; however when i insert it into my player connected to the TV it gives the message "disk error --playback feature may not be available on this disk". Ok--now what? I am up against a time line here--need the DVD for a graduation party! Help! What am I not doing correctly?

I have a brand new iMac
If you are still within your 15 day return period. Call Apple they will sent out iDVD at no charge. (There are no realistic substitutes.)
Nicely explain that you may return the computer without iDVD. That usually does the trick. You MUST speak to a senior advisor to get a free copy. The first tier people cannot do it.
408-996-1010
800-692-7753
If that doesn't work you can purchase iLife 11 (includes iDVD) on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
they recommened a 3rd party program so I downloaded "Burn-osx"
Yes, there are programs that will put a movie on a DVD. I have tried most of the other substitutes including Toast, Burn, and others. None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie. Get iDVD.

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W

Can I create an iDVD slide show and keep the picture resolution high so the pictures will be HDTV quality or near HDTV quality for playback on a DVD player?

How do I create an iDVD slide show that does not compress the photos making them low-res? When I insert the iDVD I have made into a DVD player connected to an HDTV, the playback quality of the pictures are very low. Is there a way to correct this when creatinf the iDVD?

The post by Bengt Wärleby in this topic describes a workflow for producing a high quality slideshow but not an HD one as macpmaus pointed out isn't possible: Create HD slideshow: Apple Support Communities
OT

Exported slideshow from Iphoto11 to IDVD 7.12 so I could burn DVD for play on DVD player. Fine but show stops 1/2way through because DVD has 2 chapters. How do I eliminate chapters?

I exported slideshow from Iphoto 11 to IDVD 7.12 so I could burn DVD for play on DVD player. Fine, but then when playing on DVD player show stops about 12 way and starts over. Seems there are 2 chapters in show. I wan t show to play straight through until end. How do I elimiante chapters or solve problem. Thanks. Bob Low

Try this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
Play the disk image with DVD Player and see if you get the same start over half way thru.
Did you create the slideshow in iPhoto in the slideshow mode?
or were you in an album and then used the Share ➙ iDVD menu option? What I'm trying to find out is if the slideshow in iDVD is a movie file or an iDVD slideshow with the photos from iPhoto? If it's the latter how many photos in the slideshow?
OT

How do you export your movie using idvd? I keep getting error messages and notices that I do not have enough space to transfer to a dvd.

How do you export your movie using idvd? I keep getting error messages and notices that I do not have enough space to transfer to a dvd.

Can you give us the steps to re-create the problem, and the exact wording of the error message you are getting please.

I have made a slideshow in iphoto then shared it into iDVD and burnt it onto a disk when i watched the slideshow on my dvd player the music froze several times?

Hi I have made a slideshow for my neices 21st in iphoto then have shared it into iDVD and burnt to a disk..when i watch the dvd on a dvd player the music freezes a few times?? how do i fix this :-)

Good morning,
There are a few possibilities. Here's one suggestion if your slideshow is longer than 99 images:
https://discussions.apple.com/thread/3340011
You may also wish to assemble the slideshow in iMovie if your video clips were recorded in lower resolution (12 bit) mode. Extracting the audio from these video clips can solve that problem. Here's an older discussion of that problem:
https://discussions.apple.com/message/1486285#1486285
John

My dvds that are made from iDVD will not play in a standard dvd player. Can anyone help me?*

I am running iDVD v 7.1.2(1158). I used to be able to make dvds that would play in a standard dvd player. As of today I cannot. I do not know what has changed and I do not know what needs to be updated. Can someone assist me?
The dvds that I can make will play from a disk image and they can play perfectly fine in a computer but not in a standard dvd player. I am using an external dvd burner, (The same one have always used) to create the dvds. I am using iDVD to author them.
Here is a list of my hardware.
HL-DT-ST DVDRAM GSA-5120D:
Firmware Revision:          A102
Interconnect:          USB
Burn Support:          Yes (Generic Drive Support)
Profile Path:          None
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -RAM, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          To show the available burn speeds, insert a disc and choose View > Refresh
iDVD:
Version:          7.1.2
Last Modified:          7/19/11 8:19 PM
Kind:          Intel
64-Bit (Intel):          No
Get Info String:          iDVD 7.1.2, Copyright © 2001-2011 Apple Inc. All rights reserved.
Location:          /Applications/iDVD.app
Can anyone help me? The dvds are not even detected

• Material used: Video-Codec and Photo file format and Audio file format - matters too. I use
- Video - StreamingDV .dv or AIC
- Photos as .jpg (only)
- Audio as .aiff 16bit 44.1kHz or 48kHz (ONLY - never .mp3 or directly from iTunes - all converted to .aiff first)
With this I do not mean any setting in iDVD - BUT the raw material used in iMovie / FinalCut / Avid 100 / Adobe Premiere
As this usually matters - later in iDVD
How did You Export from Video-editing program used ? I prefer
• iMovie HD6 - just drop the movie project icon (NOT iMovie Icon - the PROJECT one) over into iDVD big menu window (avoiding - drop-zones as they are for other tasks)
• iMovie'08 to '11 - Share to MEDIA BROWSER - AND AS MEDIUM - not HD or other resolution as iDVD does a bad downscaling job.
• iMovie'13 (version 10.0.x) - Share as 480p - Import this into iDVD
• FinalCut (Pro or Express) - Export as QuickTime .mov - NO QUICKTIME CONVERSION - IMPORTANT
• Adobe Premiere - I don't know - not tested Yet
• Avid 100 - I don't know - not tested Yet
Cleaning the DVD-burner - If it Burns DVDs OK then that's may be not the problem - But if it only burns CDs OK then either the DVD-burning-laser is dirty or broken.
It is very easy to kill this DVD-laser as it over-heats if one burns several DVDs in a row. I only burn three at a time - then let it cool down for 30 minutes till next batch of three DVDs.
Yours Bengt W

I made a slide show with music and random transitions in iPhoto. I can't burn it to a DVD. The burn button in iPhoto is not highlighted, and when I exported the slide show to iDVD, it lost the random transistions, and the disk won't play in DVD player.

Two problems: 1. My iphoto slide show loses its random transitions when I export it to iDVD.
2. When I then burn it to a disk, the disk will not play in a DVD player, but only on my MAC.
Any ideas?

The random transitions can only be random when played in iPhoto.
If you are in the slideshow mode and use the Share ➙ iDVD menu option a quictime movie will be created of the slideshow with the first random set of transitions and imported into iDVD. The transitions, however, will be fixed permanently and will not be changed again.
There is no way to get any sort of random behavior in an iDVD. When it's burned to disk it's locked permanently.
OT

IDVD authored DVDs that won't play in domestic players

For what it's worth with all the traffic here about discs not playing, here's my experience. Hope it helps. Although the following is a wee bit ranty, apologies.
Having successfully authored many DVDs in Panther with iDVD 2, since completely upgrading (not migrating) to a new machine with freshly installed Tiger and iDVD 5.0.1 I cannot successfully burn DVDs from either iDVD or iDVD .imgs from Disc Utility that will play in anything but my trusty 3 year-old Pioneer 355 or Apple DVD player. This is using the same media (Verbatim) as I have always used.
DVD players take a while to read the disc, then show the main menu (even if the DVD is autoplay). On selecting an asset to play, the player freezes. In fact one Panasonic player I have crashes. I have to power it down and up to get the disc out.
On authoring the same assets with the same structure using the same Verbatim media in DVD Studio Pro 4.0.3 I have complete success.
This to me goes to show that my Superdrive is almost certainly not an issue.
Rather than troubleshoot iDVD further I have decided not to use it at all until I have iDVD 6. I cannot afford to waste more time and money on software (and possibly the way software talks to hardware) that plainly does not work fresh out of the box.
Why do I use iDVD when I have DVD SP? It's hassle-free, fast, and does no less and no more than I need. Until now.
Tom Ackroyd

Sounds a lot like what I went through. Have you modified the theme (such as added a custom background image)? See my earlier post at http://discussions.apple.com/message.jspa?messageID=1689970#1689970 for a complete description of this bug.
- Andy
PowerMac G5 dual 2.5 Mac OS X (10.4.4)

DVD burned on iDVD stutters on DVD player. Am I doing something wrong?

Hi there, i'm new to burning DVD's and using this Apple Disscusion, so please bare with me!
So, I tried to use iDVD to burn a home movie onto my disk which is:
Aone
8X
DVD-R
120 Minutes
4.7GB
Everything seemed to burn fine onto my disk and played back perfectly on my Macbook, however when I put the disk into my Samsung DVD player, the movie is unwatchable. The audio and video stutters, pauses, skips; even on the menu screen and then at about 3:50, the movie flicks back to the start.
I don't think it is the DVD player or the disk as it plays other DVD's perfectly, even one from a friend with home movies on using the exactly the same disk.
Therefore I was wondering if is iDVD doing this? If so, is there any way of solving this problem? I am currently burning at a speed of 8X, does this need to be different? Also in Project Info, the encoding is set to professional quality. Other options in Project Info include:
Video Mode - PAL
Aspect Ratio - Widescreen (16:9)
DVD Type - Single-Layer (SL) - 4.2 GB
I hope I have given all the information needed,
Any help would be greatly appricated!
Thankyou!

If You keep frame rate from start to end. Then my next thought is about material used. That this might create a problem for iDVD and resulting DVD-disk.
My collection of thoughts (mine and others)
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Idvd made dvd keeps stopping in domestic dvd player

Similar Messages

Maybe you are looking for