IDVD multiplexer error and other woes - a happy tale!
I just wanted to share with anyone out there who's getting the nondescript "multiplexer error" when trying to burn a DVD in iDVD, that after poring over and trying just about every suggested solution I could find online, the one that worked was, of course, the simplest:
All I did was go to Staples and buy DVD-R blank discs instead of the DVD+R ones I had been trying to use.
Hope this helps somebody out there!
A good point you make there about media.
It is important to make sure the type of disks you are using are supported by your computer.
1.) Make sure the DVD disks you are using are compatible with your computer's optical drive. If you use a disk that is not supported by your computer's SuperDrive you may get inconsistent burn results. You can find out what types and speeds of disks your computer supports by going here and looking for the "SuperDrive" section under your model of computer: http://support.apple.com/specs/
2.) Use DVD-R disks that list a lower speed. Burnable media comes with numbering on the original packaging that indicates the speed of the disk (Usually 1x,2x,3x, etc.). A lower number may produce a more compatible disk on more systems than a high number.
3.) Try different brands of media. I personally try to stick with media made by companies with a long history of making recordable media.
Similar Messages
-
IDVD multiplexing error or freezes
I am trying to burn 2 videos onto a DVD but I get an error code or else it just hangs and will not complete the burn. I imported the videos into iphoto and then clicked on SHARE and Send to iDVD. I used a theme and put in the picture in the drop area and then clicked on Burn. This has worked before. Then it appeared to be saving everything so I left it overnight to finish the burn.
It came up with a multiplexing error. The error said to check the encoding settings. It was already set on Best Performance and this has worked before, so I did not change it. The first video is just under 30 minutes and the second video is about 8 minutes long.
The second time that I tried to burn to iDVD it acted fine and said it was Done with multiplexing but said there was about 38 minutes remaining. It just hung or froze. I had to cancel it and again have no DVD. I am using iDVD version 7.1.2 and am using Snow Leopard v. 10.6.8 on a MacBook Pro with 5 GB of memory. How can I get iDVD to burn these videos? I am using Memorex DVD+R and have burned videos to a DVD successfully in the past. Thanks.First follow this workflow to help ensure the best quality final product:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
That being said read Bengt Wärleby's post in this topic: HT1645 I was burning a DVD and the following message showed up. multiplex error There was an error during formatting. What is a multiplex error and what do I need to do about it? It's the most comprehensive teatise on the subject that's been posted in the iDVD forum.
OT -
Why does iDVD keep giving me a multiplexing error and ejects my DVD?
I have tried several times to create a simple movie with iMovie and iDVD. Both are from the iLife 6.0 series. Each time, the movie imports to iDVD okay, goes through all the asset encoding just fine, and when it get to multiplexing and burning, it stops with a message saying there was something wrong with the multiplexing or asset encoding and ejects the DVD. Help. I am at my wits end with this.
dennisHi
Multiplex Error - is one of the most complex error to run into - can be so much
see (especially new info at end of list)
MULTIPLEX ERROR !
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Max Mccarty
Mar 29, 2013 7:55 PM
I've made literally hundreds of DVD's using iDVD and I occasionally get the dreaded "Multiplex Error". In the past changing the position of chapter markers has worked, but sometimes the only way I can get the DVD to burn is to remove all the chapter markers (not a great solution).
Recently, I've discovered a bug in iDVD that creates the "Muliplex Error" message and it may be the cause of some of my previous problems. Sometimes when you export a movie to iDVD with chapters, it will create chapter menus with incredibly long playing times. My most recent "Multiplex Error" project had two chapter menus. I have a 38 second audio clip that I use for my DVD menus and the first menu showed the correct time of 38 seconds (select View>Show Inspector). The second menu with the same audio clip showed 13 minutes and 42 seconds! When I went to the Project Info window (select Project>Project Info) it now showed the total size of my DVD as 4.8 GB, too big for iDVD to encode. So, I manually adjusted the time of the second menu to 38 seconds. This time without changing anything else, iDVD burned the disk perfectly.
The interesting thing is that when I began the burn, the project info showed under 4GB for my disk. So, from now on I'll check the playing times of each menu before I burn.
Yours Bengt W -
IMOVIE IDVD multiplexing error
For the first time, after many dvd done on iDVD 5.01 I had the multiplex error when trying to create a disk image . It says error 34506 . I tryed to burn real and image disk, no difference. I t gives me error even if i try from I Movie 5.02 to export a Quick time. I checked if there is any corrupted files but I can open each single video clip with quick time. I remove the preferences file, with no results. It happen all of a sudden with no major changes in the configuration of the system.
If someone can help I will be greatfull
ScricchioloI also keep getting the "Error 34506" message and iDVD lock-ups. I have burned tons of DVDs with no trouble until now.
The problem started when I (just) realized that my iDVD preferences were set to the default "best performance" when I switched over to my G5 tower. I have burned DVDs on it but did not realize that the "high quality" preference was not set like it was on my other machine.
Anyway, since I switched it to "high quality" I cannot burn DVDs. If I set the prefs to "best performance" it works fine -- which is why I think dumping the "com.apple.iDVD.plist"; fixes things for some people -- it defaults to "best performance" on restart.
I have tried all suggestions (delete encoded assets, delete prefs, simplify menus, keep snap to grid on, have plenty of free space, and even rebuilding the entire iDVD project) but to no avail.
I found that the issue has everything to do with the "high quality" setting in the preferences.
I am using iDVD 5
G5 quad
OS X 10.4.10
Quicktime 7.2.0
Importing dv from a final cut express project and 140 pictures as a slide show
I'm not happy about using the "best performance" setting, but at least it burns for now. Anyone know what the differences between "best performance" and "high quality" are specifically?
Hope this helps,
Greg -
I built a short sideshow (9 min) with music in iMovie5 and successfully imported into iDVD. When I try to burn the movie to DVD disc using my external LaCie d2 DVD+/- RW I get a multiplexing error. I have recreated the movie from iMovie5 and that doesn't help. Any suggestions? I contacted LaCie and they told me to try one of their recommended media (Verbatim) and that didn't work. Any comments would be appreciated.
I AM HAVING THIS SAME ISSUE and it's driving me insane.
I have tried every route. I can burn other things to the DVD-R or DVD-RW disk from the external LaCie burner, so I know it works...but now as far as iDVD being able to burn it just won't do it. I get about 3 seconds of my dvd movie menu and then it quits. I cannot even get them to play in the imac drive without having to go to the files and find the one that plays it on the computer.
This is really annoying as I have spent a lot of time trying to get this to burn correctly..even down to removing iDVD from the computer and then reinstalling it.
Arghhh.... -
IDVD Multiplexer error # -536870198
I have been running a series of movies with slide shows at the end. All seems well in iMovie 5 but when going to iDVD 5 and doing the burn, it encodes assets, renders movie and audio. Almost immediately after it goes in to burn mode you hear the DVD spin up, slowdown, then stop. Error message appears saying "Burnung finished. Errors were found during process. I click the disclosure arrow and get the error code # -536870198 - Multiplexer error. Problem during Multiplex/Burning. Anyone have an idea what that code means and how to fix it?
Dual G5/2.0 GHz. Mac OS X (10.4.3)I have been suffering like most on this discussion with multiplexing errors. The only thing I can add is something I haven't come across in reading thus far. System profiler says my superdrive supports DVD+R, but that type of media was the source of my problem. Interestingly, I burned 3 copies of a movie onto these type of discs, and that's when I began to get the multiplexor errors. I tried most everything in these discussions to no avail, and then decided to change the dvd media, just in case. I used Maxell DVD-R discs, and it finally worked.
My point is: even though my superdrive should be able to use DVD+R media, it didn't. If you're in a similar situation, switch to DVD-R and hopefully, this will save you time, money and headaches
Powermac G5 Dual 2.0 Mac OS X (10.4.4) 16xSuperdrive -
I've been trying for what seems like days now to get iDVD to burn my dvd but I keep getting the "Multiplexer error". I've tried changing the speed to 4x then 2x and that didn't help. I've checked for software updates, restarted my Imac and idvd numerous times.
Is it possible anyone can give me a step by step guide of how to stop this issue? I really need to get this dvd burned a.s.a.p I have no apps or anything running on my Imac as I'm trying to burn a dvd and my Imac is pretty new it's got tons of space. It's 3am I've been working at this for hours with no sucess so far. I'm using Idvd 7.1.1Hi
Multiplex Error - Can be a lot of different things - one very common and not obvious is
• In iDVD - turn on TV-Safe area - NO buttons or pictures can go outside this OR EVEN Just touching it !
Move all well inside this !
Else
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else converted to this .aff 48KHz)
Chapters !
A. Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9 strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous trys, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 secs beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref file
8. Make a new iDVD project
9. Movies in project with same aspect ratio eg 4x3 or 16x9
10. No other programs/applications running during iDVD process. eg Internet, screen & energy savers
Yours Bengt W -
PSE 9 Organizer Error Adding Keyword Tags and Other Woes
Hello, everyone. I am having a ton of problems with PSE 9 Organizer. The most frustrating and biggest problem is that I believe my catalog has been corrupted beyond repair. I spent all of yesterday tagging my photos. I had no problems and everything seemed to be going well until all of the sudden, the organizer suddenly froze up. I had to use the Windows task manager just to get it to close. This happened several times. Finally, the organizer locked up my computer and I had to restart. I opened the catalog and didn't seem to have any problems at that point. I was able to view all of the images, video files etc. I was even able to open the editor from the organizer. When I tried to add a tag to a photo it gave me an error. All it said was "error adding keyword tag" then nothing. I tried to delete the photo and all it said was "error deleting photo". This "error" shows up any time I try to make any changes to all of the images. I can't add any new photos, can't delete, or add tags. I have repaired the catalog several times. It found errors the first time, but evidently that didn't fix my problem. I also optimized and deleted my thumbnail cache to see if that was the issue. Still nothing. I have other catalogs and they work fine, so it is something to do with this particular catalog. Any suggestions on what to do next? Can I move the pictures to a new catalog without losing the tags? And no, I didn't write the tags to the images because I wasn't done tagging. Besides, PSE doesn't always write the tags correctly, as you probably know. Next problem. When I first open PSE and select the organizer, it doesn't alway open. I can see it on my taskbar (Windows 7 64 bit), but I can't get the window to maximize. I have to close and open several times to get the window to open. Sometimes it randomly jumps to my second monitor like it can't decide where to go. Very frustrating. I would appreciate any suggestions about what to do. Thanks.
Back to the original question, after thinking about this for a couple days I have had two ideas for workarounds:
1) Copy my tag names into the photo metadata and create a new catalog to bring all of my images into. This will allow me to keep all of my existing tags, and it MIGHT solve the tag display problem based on a test with a couple images in a new catalog. The downsides to this are a) permanently writes my tags into the photo metadata which will be bad if I decide to change something later, b) loses all version sets, and c) loses all albums (although I don't have that many). I found instructions for this workaround at http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Merging_Catalogs.
2) Live with the lack of color tag display in Organizer, and use reverse searches to find missing tag categories. For example, if I want to find all photos that do not have a "Places" tag, I check the box next to the "Places" category (which also selects all sub-categories and tags below this). Then I go to the Options drop-down in the Find Bar and "Hide best match results" and "Show results that do not match". This gives me every image in my catalog that does not have a tag from the "Places" category, so I can go through and tag these as appropriate.
I would have gone with #1 if it weren't for the permanence of the keywords. I guess I have a commitment problem (or I just haven't got my tag hierarchy figured out yet). Instead, I am going with #2 which should give me most of what I need for now. I will still hold out some small glimmer of hope that Adobe manages a fix for this issue down the road. -
Adobe Application Manager Download Error (and other problems)
Last week I purchased a Creative Cloud membership (Student and Teacher Edition, if that matters at all). When I tried to download applications, the Adobe Application Manager seemed to be unable to connect and instead displayed "Download Error. Press Retry to try again or contact customer support." I read some of the responses to this problem on the forums, and after trying several things, I got it to work (I'm honestly not sure what I did that caused it to work). However, it is now failing to work again and I can't seem to fix it this time. As an additional problem, When I tried to open Adobe Premiere Pro (which I managed to download when I got the App Manager working for a while), I got the opening screen that asked me to open a project or start a new project. No matter what I clicked on, Premiere Pro closed with an error message. Just as with the App Manager (and at the same time), I managed to get Premiere Pro to work (it seemed to work after I set permissions so I thought I solved it), so I was able to use it for a day. However, now the problem has returned.
I don't know if these two problems are related, but they started working at the same time and stopped working at the same time, so I'm posting them together in case there is a connection. I am running Windows Vista on my home computer. I can sign on to the creative cloud online without problem so it recognizes me as a creative cloud subscriber. My Internet connection is working fine. I have disabled all firewalls and it still doesn't work. Very frustrating, obviously.
Thanks for your time and any help or suggestions you can give.
- KPKardypaine for your Internet configuration difficulties I would recommend reviewing Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.
For the failure of Premiere Pro to open you will want to review the install log to see if you received an installation error. You can find details on how to locate and interpret the installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html. -
10.4 Server TLS errors and other errors
My mail server is giving me a variety of errors that I haven't been able to figure out how to fix.
TLS server engine: cannot load cert/key data
Feb 11 16:35:45 Mail-Server imap[421]: error initializing TLS
Feb 11 16:35:45 Mail-Server imap[421]: TLS server engine: cannot load CA data
Feb 11 16:35:45 Mail-Server imap[421]: unable to get certificate from '/etc/certificates/Default.crt'
Feb 11 16:35:45 Mail-Server imap[421]: TLS server engine: cannot load cert/key data
Feb 11 16:35:45 Mail-Server imap[421]: error initializing TLS
DBERROR: skiplist recovery /var/imap/user/f/frances.seen: 0240 should be ADD or DELETE
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: opening /var/imap/user/f/frances.seen: cyrusdb error
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: skiplist recovery /var/imap/user/f/frances.seen: 0240 should be ADD or DELETE
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: opening /var/imap/user/f/frances.seen: cyrusdb error
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: skiplist recovery /var/imap/user/f/frances.seen: 0240 should be ADD or DELETE
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: opening /var/imap/user/f/frances.seen: cyrusdb error
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: skiplist recovery /var/imap/user/f/frances.seen: 0240 should be ADD or DELETE
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: opening /var/imap/user/f/frances.seen: cyrusdb error
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: skiplist recovery /var/imap/user/f/frances.seen: 0240 should be ADD or DELETE
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: opening /var/imap/user/f/frances.seen: cyrusdb error
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: skiplist recovery /var/imap/user/f/frances.seen: 0240 should be ADD or DELETE
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: opening /var/imap/user/f/frances.seen: cyrusdb error
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: skiplist recovery /var/imap/user/f/frances.seen: 0240 should be ADD or DELETE
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: opening /var/imap/user/f/frances.seen: cyrusdb error
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: skiplist recovery /var/imap/user/f/frances.seen: 0240 should be ADD or DELETE
Feb 11 16:52:15 Mail-Server imap[373]: DBERROR: opening /var/imap/user/f/frances.seen: cyrusdb error
I'm using Plain authentication without SSL. I just bought a new MacBook Pro with 10.9.1, and whenever I send an email it says that Authentication fails, but sends the email anyway, and I'm not sure if that's something I should worry about or not.
Feb 11 17:00:00 Mail-Server postfix/smtpd[626]: warning: AOD: Authentication failed for user rstilley. (Open Directroy error: -14090)
Feb 11 17:00:00 Mail-Server postfix/smtpd[626]: warning: 24-178-136-163.dhcp.crtn.ga.charter.com[24.178.136.163]: SASL PLAIN authentication failed
I haven't been able to find much out about this Open Directory error (odd that Directory is misspelled...)
Any help anyone can give me would be most appreciated. I'll be glad to post any log files.
Here is my postconf -n output:
Mail-Server:/var/log root# postconf -n
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
delay_warning_time = 1h
disable_vrfy_command = yes
enable_server_options = yes
inet_interfaces = all
luser_relay =
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maximal_queue_lifetime = 2d
message_size_limit = 0
mydestination = $myhostname,localhost.$mydomain,times-georgian.com
mydomain_fallback = localhost
myhostname = times-georgian.com
mynetworks = 127.0.0.1/32,10.1.6.0/24
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
owner_request_special = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpd_client_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_rbl_client zen.spamhaus.org,permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = permit_sasl_authenticated,permit_mynetworks,check_helo_access hash:/etc/postfix/helo_access,reject_non_fqdn_hostname,reject_invalid_hostname, permit
smtpd_pw_server_security_options = plain
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,permit
smtpd_sasl_auth_enable = yes
smtpd_tls_loglevel = 0
smtpd_use_pw_server = yes
smtpd_use_tls = no
unknown_local_recipient_reject_code = 550
Thanks in advance.UPDATE: My VPN is now running!
Through a series of Firewall configuration changes, I am now able to connect and access files on the server through VPN. I still have some small details to work-out (i.e., I can't browse the Windows environment under the Network tab of My Computer). I can however map to the drive directly using the IP address.
Windows 7 and Vista clients connect via L2TP using shared secret. -
Photo images from dig. cam [one is error and other won't open] questions
My wife inserted the sd card in the card reader and copied about 70 photo image files to the Mac. The camera that took all the 70 photos was a Panasonic DMC-LZ5 but I don't think the camera model matters much here.
For the first time, 2 of the many images seem to be corrupt. Mac X reports one photo image has an error while trying to open and reports the second image won't open.
My main concern is whether or not to just delete the two error/corrupt jpg images. My other main concern is that I don't want to keep the two images if it could affect or corrupt my hd or Mac system in some way.
I normally just trash corrupted files; however, in this case I went ahead and attempted to open both of the 2 troubled files myself later and they both opened up in Preview and didn't report any error or corruption. However, one of the jpg images defintely is corrupt when viewing it as the bottom of the image is definitely messed up. However, the other image now opens perfectly and looks fine to the eye as if nothing is wrong with it.
Here is a link to the one photo image that isn't quite right [note the obvious distortion at bottom of image]. Link is http://mysite.verizon.net/vzenvo78/question595.jpg
Further very relevant information: The SanDisk sd card that all the 70 images were on is a 1 gig card and the sd card seems to be a total loss. The sd card can't be initialized/formatted by disk utility and furthermore the sd card is no longer recognized by the Panasonic camera - the Panasonic camera won't even preview the images off the card or allow me to format the card even from the camera.Hello,
I see what you are talking about. I just discovered this same exact problem on a friends G5 after he uploaded pics from his Leica.
This is what I did: I ran Disk Utility from the system restore disc to verify and repair the drive. DU reported Volume Bitmap problems. DU was able to repair the disc. Next, I created a new user account and tried uploading the images from the camera to the G5 and it worked just fine. The images loaded like they should.
I also reinstalled the drivers that came with the camera.
Delete any files that your Mac reports as a problem. It's just not worth leaving them on the drive.
So...... run Disk Utility from your system restore disc. If it reports errors, hopefully DU can repair them. If not, one option is to get DiskWarrior here:
www.alsoft.com or TechToolPro4 here: www.micromat.com
One other idea is how old is the card?
Next idea is to create a new user acccount: System Prefs/Accounts. Try using that account to upload the same images. See if they upload as they should. If they do, then the issue isn't system wide, it's just in the other user account.
Remember to always back up your images/audio/data often as you never know when you might need to do either an Archive or Erase and Reinstall.
Carolyn -
Adobe CS5.5 Production Premium Install Errors and Other Issues
Hi,
I just installed Adobe CS5.5 Production Premium on my computer and had some errors pop up at the end of installation. I will paste the summary below. I've tried to install Procction Premium a couple of times. I've used the Adobe Cleaner Tool. From what I've researched, the Flash Issue is a a false error since Flash was already installed on the computer. Is the rest of it connected to the Flash issue as well?
Thr programs all seem to work fine except for the issue below.
My other question is that when I am in Windows Explorer and I Right-Click on say a .jpg file and select Open With... I am not able to select Adobe Photoshop or Illustrator for that matter. I have Dreamweaver CS4 and that shows up as an option. I have gone through the process of trying to add the Adobe Photoshop .exe file, but it still doesn't work. However, if I open Adobe Bridge, I am able to select Photoshop or Illustrator to open a file. Is this connected to my install or is there something else going on? I did uninstall an ancient version of Adobe Photoshop 7.0 that I've had for years, but that was prior to installing Production Premium CS5. Could that have caused an issue? I read that uninstalling an old Photoshop can cause problems like this.
Any help would be greatly appreciated.
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 2 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current
State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)
\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit
2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.7E8FC6P-
1021rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f80493091e8e552c84a28 97e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {43A1C48E-3E50-410e-951C-E17A66BBF824} Adobe Flash Player 10 Plugin 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part
of the setup did not finish as expected. Contact your support personnel or package vendor. Action
NewCustomAction1, location: C:\Users\RYANAN~1\AppData\Local\Temp\InstallPlugin.exe, command: -
install plugin -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run
as part of the setup did not finish as expected. Contact your support personnel or package vendor.
Action NewCustomAction1, location: C:\Users\RYANAN~1\AppData\Local\Temp\InstallPlugin.exe,
command: -install plugin -msi
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 Plugin: Install failed
Message was edited by: rynohoseYes, your installation errors appear to be the innocuous false errors related to the brain-dead Flash installer. If the programs seem to be working fine, don't worry about it. As far as not being able to open images with Photoshop from Windows Explorer, I recommend taking that question to the Photoshop forum.
-
Edge Animate causing Server Time Out Error and other problems
Site is not verifying due to Server Time Out error. Also menu which was created with Adobe Edge Animate does not show up as navigation in a site map or when bots read the site. Site won't verify or index in google.
Suggestions on how to fix this would be helpful and appreciated.
This is the website address. please type in Without any spaces:
louis place cafe DOT com DOT auSite is not verifying due to Server Time Out error. Also menu which was created with Adobe Edge Animate does not show up as navigation in a site map or when bots read the site. Site won't verify or index in google.
Suggestions on how to fix this would be helpful and appreciated.
This is the website address. please type in Without any spaces:
louis place cafe DOT com DOT au -
Tomcat error and others !!
Hi ,
I'm beginner in Jave. When I start tomcat in command line ,it appears new window named tomecat3.2 but shows error like that " The file name, directory name or volume label syntex is in correct" . How can I solve this problem??
How can I install J2EE 1.2.1 application server?? I install j22ee1.2.1 sdk already. Is that enough or what else I need to install??
To create java beans entity, what should I do??
thanksI can't help you with your Tomcat technical problems.
But since you're a beginner, I'd like to refer you to some very good books you ought to read if you're interested in learning how to develop web applications.
The first book you should read is "core servlets and JSP" from Marty Hall. if you don't mind to read the older version, you can find a pdf file of this book at http://www.coreservlets.com/.
A second book is the "Apache Tomcat Bible" from Eaves, Jones and Godfrey. This book explains what you need to develop web applications with Java, MySQL and Tomcat. And it shows the source code of a java web application for a cinema complex.
Next, you should try to learn about the Model-View-Controller design pattern and learn how to divide your application in 3 layers.
If you're looking for a free IDE, take a look at eclipse (eclipse.org), Gel for your JSP's (Gexperts.com) or JCreator if you want to take a quick start. JCreator (Jcreator.com) is easier to start with than eclipse.
And finally, your question about a java bean. Well, a java bean is a java class containing properties and methods. The properties can only be changed or displayed if you use the so called getters and setters. These are functions in order to controll the properties. And then there is the constructor method(s). You have to define how you can make an object of the class. I'll give an example of a java bean. Don't mind the words you don't understand, it's Dutch.
/** Java class "Meterronde.java" generated from Poseidon for UML.
* Poseidon for UML is developed by Gentleware.
* Generated with velocity template engine.
package org.gertcuppens.mopo;
// import java.util.*;
import java.util.Collection;
// import java.sql.*
import java.sql.ResultSet;
import java.sql.SQLException;
* <p>
* Een meterronde is een geografisch geheel van meteretappes, die binnen
* een beperkte periode van 2 tot 4 dagen gelezen moet worden.
* </p>
public class Meterronde {
// attributes
* <p>
* is de nummer die overeenstemt met de beurtrolwijknummer. De
* beurtrolwijken zijn een geografische onderverdeling van het
* verzorgingsgebied van AWW waaraan een beurtrolinspecteur is toegekend.
* </p>
private int wijknummer;
* <p>
* is de nummer van de ronde binnen de wijknummer. Wijknummer en
* rondenummer vormen samen een unieke sleutel die de meterronde
* identificeert.
* </p>
private int rondenummer;
* <p>
* is de omschrijving van de meterronde.
* </p>
private String omschrijving;
* <p>
* is de streefdatum (dag/maand) waarop de jaarlijks te lezen meters
* gelezen moeten worden.
* </p>
private int streefdatumJR;
* <p>
* is de streefdatum (dag/maand) van het eerste kwartaal waarop de
* trimestriële en driemaandelijks te lezen meters gelezen moeten worden.
* </p>
private int streefdatumK1;
* <p>
* is de streefdatum (dag/maand) van het tweede kwartaal waarop de
* trimestriële en driemaandelijks te lezen meters gelezen moeten worden.
* </p>
private int streefdatumK2;
* <p>
* is de streefdatum (dag/maand) van het derde kwartaal waarop de
* trimestriële en driemaandelijks te lezen meters gelezen moeten worden.
* </p>
private int streefdatumK3;
* <p>
* is de streefdatum (dag/maand) van het vierde kwartaal waarop de
* trimestriële en driemaandelijks te lezen meters gelezen moeten worden.
* </p>
private int streefdatumK4;
* <p>
* is het aantal actieve leidingen toegekend aan actieve contracten die aan
* deze meterronde zijn toegekend.
* </p>
private int aantalContractueleLeidingen;
* <p>
* is het aantal actieve meters dat aan deze meterronde is toegekend.
* </p>
private int aantalActieveMeters;
* <p>
* is het aantal meters van de meterronde die in de CMB-gegevens voorkomen.
* </p>
private int aantalInCMB;
* <p>
* is het aantal jaarlijkse meters waarvan de plandatum voorbij is ...
* </p>
private int aantalTeLezenJR;
* <p>
* is het aantal trimestriële meters waarvan de plandatum voorbij is
* </p>
* <p>
* </p>
private int aantalTeLezenTR;
* <p>
* is het aantal driemaandelijkse meters waarvan de plandatum voorbij is
* </p>
* <p>
* </p>
private int aantalTeLezen3M;
* <p>
* is het aantal maandelijkse meters waarvan de plandatum voorbij is
* </p>
* <p>
* </p>
private int aantalTeLezen1M;
* <p>
* is het aantal actieve meters van deze meterronde waarvan de plandatum
* voorbij is.
* </p>
private int aantalTeLezen;
* <p>
* is de verzameling van meteretappes van deze meterronde. ...
* </p>
private Collection meteretappes;
* Represents ...
private Collection teLezenMeteretappes;
* Represents ...
private Collection gelezenMeteretappes;
* Represents ...
private Collection afwijkendeMeteretappes;
// operations
* Does ...
* @return
* <p>
* geeft de wijknummer weer .
* </p>
* @return
public int getWijknummer() {
return wijknummer;
} // end getWijknummer
* <p>
* geeft de rondenummer weer ...
* </p>
* @return
public int getRondenummer() {
return rondenummer;
} // end getRondenummer
* <p>
* geeft de wijkronde weer ; wordt gebruikt in combinatie
* met radiobuttons; hierdoor weten we welke primary key (wijk+ronde)
* er geldig is bij de gekozen radiobutton
* </p>
* @return
public int getWijkRonde() {
return ((wijknummer * 100) + rondenummer) ;
} // end getWijkRonde
* <p>
* geeft de omschrijving weer ...
* </p>
* @return
public String getOmschrijving() {
return omschrijving;
} // end getOmschrijving
* <p>
* geeft de streefdatum weer waarop de jaarlijkse meters gelezen moeten
* worden
* </p>
* @return
public int getStreefdatumJR() {
return streefdatumJR;
} // end getStreefdatumJR
* <p>
* geeft de streefdatum weer waarop de trimestriële en driemaandelijkse
* meters gelezen moeten worden in het eerste kwartaal
* </p>
* <p>
* </p>
* @return
public int getStreefdatumK1() {
return streefdatumK1;
} // end getStreefdatumK1
* <p>
* geeft de streefdatum weer waarop de trimestriële en driemaandelijkse
* meters gelezen moeten worden in het tweede kwartaal
* </p>
* <p>
* </p>
* @return
public int getStreefdatumK2() {
return streefdatumK2;
} // end getStreefdatumK2
* <p>
* geeft de streefdatum weer waarop de trimestriële en driemaandelijkse
* meters gelezen moeten worden in het derde kwartaal
* </p>
* <p>
* </p>
* @return
public int getStreefdatumK3() {
return streefdatumK3;
} // end getStreefdatumK3
* <p>
* geeft de streefdatum weer waarop de trimestriële en driemaandelijkse
* meters gelezen moeten worden in het vierde kwartaal
* </p>
* <p>
* </p>
* @return
public int getStreefdatumK4() {
return streefdatumK4;
} // end getStreefdatumK4
* <p>
* Geeft het aantal leidingen weer van de meterronde die actief zijn en
* gekoppeld zijn aan en actief BO ...
* </p>
* @return
public int getAantalContractueleLeidingen() {
return aantalContractueleLeidingen;
} // end getAantalContractueleLeidingen
* <p>
* Geeft het aantal actieve meters weer gekoppeld aan de meterronde ...
* </p>
* @return
public int getAantalActieveMeters() {
return aantalActieveMeters;
} // end getAantalActieveMeters
* <p>
* geeft het aantal meters weer dat is doorgegeven aan CMB ...
* </p>
* @return
public int getAantalInCMB() {
return aantalInCMB;
} // end getAantalInCMB
* <p>
* Geeft het aantal actieve meters weer die jaarlijks gelezen moeten worden
* en waarvan de plandatum voorbij is ...
* </p>
* @return
public int getAantalTeLezenJR() {
return aantalTeLezenJR;
} // end getAantalTeLezenJR
* <p>
* Geeft het aantal actieve meters weer die trimestrieel gelezen moeten
* worden en waarvan de plandatum voorbij is
* </p>
* <p>
* </p>
* @return
public int getAantalTeLezenTR() {
return aantalTeLezenTR;
} // end getAantalTeLezenTR
* <p>
* Geeft het aantal actieve meters weer die driemaandelijks gelezen moeten
* worden en waarvan de plandatum voorbij is
* </p>
* <p>
* </p>
* @return
public int getAantalTeLezen3M() {
return aantalTeLezen3M;
} // end getAantalTeLezen3M
* <p>
* Geeft het aantal actieve meters weer die maandelijks gelezen moeten
* worden en waarvan de plandatum voorbij is
* </p>
* <p>
* </p>
* @return
public int getAantalTeLezen1M() {
return aantalTeLezen1M;
} // end getAantalTeLezen1M
* <p>
* Geeft het totaal aantal actieve meters weer waarvan de plandatum
* voorbij is
* </p>
* <p>
* </p>
* @return
public int getAantalTeLezen() {
return aantalTeLezen;
} // end getAantalTeLezen
* <p>
* Geeft de meteretappes weer die tot deze meterronde behoren ...
* </p>
* @return
public Collection getMeteretappes() {
return meteretappes;
} // end getMeteretappes
* Does ...
* @return
public Collection getTeLezenMeteretappes() {
return teLezenMeteretappes;
} // end getTeLezenMeteretappes
* Does ...
* @return
public Collection getGelezenMeteretappes() {
return gelezenMeteretappes;
} // end getGelezenMeteretappes
* Does ...
* @return
public Collection getAfwijkendeMeteretappes() {
return afwijkendeMeteretappes;
} // end getAfwijkendeMeteretappes
* <p>
* noteert de wijknummer ...
* </p>
* @param _wijknummer
public void setWijknummer(int _wijknummer) {
wijknummer = _wijknummer;
} // end setWijknummer
* <p>
* noteert de rondenummer ...
* </p>
* @param _rondenummer
public void setRondenummer(int _rondenummer) {
rondenummer = _rondenummer;
} // end setRondenummer
* <p>
* noteert de omschrijving ...
* </p>
* @param _omschrijving
public void setOmschrijving(String _omschrijving) {
omschrijving = _omschrijving;
} // end setOmschrijving
* <p>
* noteert de datum waarop de jaarlijks te lezen meters gelezen moeten
* worden ...
* </p>
* @param _streefdatumJR
public void setStreefdatumJR(int _streefdatumJR) {
streefdatumJR = _streefdatumJR;
} // end setStreefdatumJR
* <p>
* noteert de datum waarop de trimestriële en driemaandelijks te lezen
* meters gelezen moeten worden in het eerste kwartaal
* </p>
* <p>
* </p>
* @param _streefdatumK1
public void setStreefdatumK1(int _streefdatumK1) {
streefdatumK1 = _streefdatumK1;
} // end setStreefdatumK1
* <p>
* noteert de datum waarop de trimestriële en driemaandelijks te lezen
* meters gelezen moeten worden in het tweede kwartaal
* </p>
* <p>
* </p>
* @param _streefdatumK2
public void setStreefdatumK2(int _streefdatumK2) {
streefdatumK2 = _streefdatumK2;
} // end setStreefdatumK2
* <p>
* noteert de datum waarop de trimestriële en driemaandelijks te lezen
* meters gelezen moeten worden in het derde kwartaal
* </p>
* <p>
* </p>
* @param _streefdatumK3
public void setStreefdatumK3(int _streefdatumK3) {
streefdatumK3 = _streefdatumK3;
} // end setStreefdatumK3
* <p>
* noteert de datum waarop de trimestriële en driemaandelijks te lezen
* meters gelezen moeten worden in het vierde kwartaal
* </p>
* <p>
* </p>
* @param _streefdatumK4
public void setStreefdatumK4(int _streefdatumK4) {
streefdatumK4 = _streefdatumK4;
} // end setStreefdatumK4
* <p>
* noteert het aantal actieve leidingen van de meterronde die gekoppeld
* zijn aan een actief contract ...
* </p>
* @param _aantalContractueleLeidingen
public void setAantalContractueleLeidingen(int _aantalContractueleLeidingen) {
aantalContractueleLeidingen = _aantalContractueleLeidingen;
} // end setAantalContractueleLeidingen
* <p>
* noteert het aantal actieve meters van de meterronde ...
* </p>
* @param _aantalActieveMeters
public void setAantalActieveMeters(int _aantalActieveMeters) {
aantalActieveMeters = _aantalActieveMeters;
} // end setAantalActieveMeters
* <p>
* noteert het aantal meters dat aan CMB is overgedragen ...
* </p>
* @param _aantalInCMB
public void setAantalInCMB(int _aantalInCMB) {
aantalInCMB = _aantalInCMB;
} // end setAantalInCMB
* <p>
* noteert het aantal jaarlijks meters waarvan de plandatum voorbij is ...
* </p>
* @param _aantalTeLezenJR
public void setAantalTeLezenJR(int _aantalTeLezenJR) {
aantalTeLezenJR = _aantalTeLezenJR;
} // end setAantalTeLezenJR
* <p>
* noteert het aantal trimestrieel meters waarvan de plandatum voorbij is
* </p>
* <p>
* </p>
* @param _aantalTeLezenTR
public void setAantalTeLezenTR(int _aantalTeLezenTR) {
aantalTeLezenTR = _aantalTeLezenTR;
} // end setAantalTeLezenTR
* <p>
* noteert het aantal driemaandelijks meters waarvan de plandatum voorbij
* is
* </p>
* <p>
* </p>
* @param _aantalTeLezen3M
public void setAantalTeLezen3M(int _aantalTeLezen3M) {
aantalTeLezen3M = _aantalTeLezen3M;
} // end setAantalTeLezen3M
* <p>
* noteert het aantal maandelijks meters waarvan de plandatum voorbij is
* </p>
* <p>
* </p>
* @param _aantalTeLezen1M
public void setAantalTeLezen1M(int _aantalTeLezen1M) {
aantalTeLezen1M = _aantalTeLezen1M;
} // end setAantalTeLezen1M
* <p>
* noteert het aantal meters waarvan de plandatum voorbij is
* </p>
* <p>
* </p>
* @param _aantalTeLezen
public void setAantalTeLezen(int _aantalTeLezen) {
aantalTeLezen = _aantalTeLezen;
} // end setAantalTeLezen
* <p>
* noteert alle meteretappes van de meterronde ...
* </p>
* @param _meteretappes
public void setMeteretappes(Collection _meteretappes) {
meteretappes = _meteretappes;
} // end setMeteretappes
* Does ...
* @param _teLezenMeteretappes
public void setTeLezenMeteretappes(Collection _teLezenMeteretappes) {
teLezenMeteretappes = _teLezenMeteretappes;
} // end setTeLezenMeteretappes
* Does ...
* @param _gelezenMeteretappes
public void setGelezenMeteretappes(Collection _gelezenMeteretappes) {
gelezenMeteretappes = _gelezenMeteretappes;
} // end setGelezenMeteretappes
* Does ...
* @param _afwijkendeMeteretappes
public void setAfwijkendeMeteretappes(Collection _afwijkendeMeteretappes)
afwijkendeMeteretappes = _afwijkendeMeteretappes;
} // end setAfwijkendeMeteretappes
// Constructors
* Aanmaken van een meterronde op basis van een ResultSet
* @author GC1494
* @param _rs
public Meterronde ( )
this.setWijknummer(0 ) ;
this.setRondenummer(0) ;
this.setOmschrijving("???") ;
public Meterronde (ResultSet _rs)
throws SQLException
this.setWijknummer(_rs.getInt("rowynr")) ;
this.setRondenummer(_rs.getInt("roronr")) ;
this.setOmschrijving(_rs.getString("roomsc")) ;
} // end Meterronde -
Lightroom 5.5 internal error and other issues
Since upgrading to Lightroom 5 (I'm using 5.5 now), I've had all sorts of weird behavior and slow performance, particularly in the Library module. After heavy use in the Library, Lightroom starts to refuse to reorder, or add to collections, or it will open the wrong photo in Photoshop when I press Ctrl-E, all kinds of things. One day I couldn't quit by pressing Ctrl-Q; it would bring up the Export dialog box. Typically if I exit and restart, the problems go away for a time.
Today, the latest is this:
I've deleted the Preference files once, and I regularly optimize the catalog. Any clues where I could go from here?
Windows 7 Home Premium, 64 bit.Do you have the 3G/4G mobile network active when you press the download button in the message? Whenever I had to download the attachments in a mms message, I did it while connected to the 3G network. The wifi connection had to be turned off or disconnected.
HTH
Maybe you are looking for
-
I deleted my old email account and when i went to change everything on my iphone it still shows the old email even though i created a new apple id. I also can't remember the password and now can't access icloud. Do i need to reset the phone?
-
Hi, After a sudden power failure, I guess vista file system is corrupt. I am able to start vista in normal mode, but it seems there are errors like Event Log service unable to start itself, when I start IE, it closes automatically , Norton antiv
-
[SOLVED] recommendation for a text editor that can handle 25mb+ files?
Not sure where to put it, so I put it her (if it's not the right place, can someone please move it.. thanks!) I'm building a database of about 60,000 files in folder X. I'm using php to organise all the files and clean them up (for exmaple removing "
-
How pop up form Purchase Order !
How pop up form Purchase Order and show last record
-
REPLACEMENT PATH IN THE VARIABLES
Hi All, I am working on the reports part n i had requirement to create the query using the replacement path processing type in the variables. can any body guide me y n when v go for this n what r the steps to follow. thanks & regards priya