IDVD New movie burns with last movies audio

I have several users with individual log-ins on a G5. When I burn a DVD it has the correct video, but the audio is from the last DVD - in a different account. Movie C has soundtrack from movie B, Movie B has soundtrack from Movie A etc.
I've saved under differnet names, restarted the computer and same result. Hope somebody knows the answer.
Thanks

Hi whalenp:
Welcome to discussions!
Does this help?
A fix for iDVD using the incorrect soundtrack when burning
http://www.macosxhints.com/article.php?story=20040111064120832
Sue

Similar Messages

  • For all you folks trying to install a new DVD burner with no luck

    I just bought a Panasonic UJ 841 for my Toshiba A100. It contains BOTH master and slave firmware. I installed the drive and like most of you it disn't see the drive in the BIOS. I contacted the guy in Taiwan who I bought the drive from and he showed me the slickest trick I have seen in a while. You DO NOT NEED TO FLASH THE FIRMWARE TO MAKE IT A SLAVE DRIVE.  Here is his fix and photos telling you how to deal with the problem. I take no responsibility if you screw up your drive doing this. It requires no soldering. It worked for me like a charm. This is for your information only. If you do it you do it at your own risk. (which is very little).
    www.meyersmultimedia.com/panasonicfix
    Enjoy. Hope it helps you all out. May also work with other drives but this one I know for sure it does. If you need one of these drives they are 76.00 free shipping at http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=350148525780&ssPageName=ADME:X:RTQ:US:1123
    Message Edited by rick7653 on 01-20-2009 02:07 PM
    Solved!
    Go to Solution.

    Works fine,on  Toshiba a135...ASUS

  • Burning with Other Programs?

    I've continually had burning error 4261 preventing me from making CD's with iTunes. Someone suggested burning from iTunes using another program like Nero. I am totally unfamiliar with doing that. How would that work. I like (or did whenever I was miraculously able to burn one in iTunes) the ability to drag n drop.
      Windows XP  

    Hi
    Doing slideShows in iMovie 1 to HD 6. I don't use "Share/Export to iDVD" from
    within iMovie.
    I close iMovie and import the Show from iDVD = iDVD renders and does this OK.
    iMovie'08 & 09 - Never tired that.
    Alt. to iDVD is to burn with Roxio Toast™ ($$$ - cost)
    • Export out (any iMovie version) as High Quality QuickTime .mov and
    • Import this into Toast™
    Yours Bent W

  • Idvd can't burn .mov with error message

    Hi guys,
    I just finished a 57 min. project with Final Cut Express4 containing 8 sequences. I export them separately.  I burned them with idvd : File>Export>Quick Time Movie (self contained uncheck), I include Audio & Video as usual and save them in the Movie Folder as .mov; everything goes fine and I can watch them both in computers and TVs. But when I export the entire project with chapter markers (exactly the same way I did for the above), the result is different, and the idvd refuse to burn it, an error message says ”unsupported file type: broken reference movie”.   Those exported in separate sequences are shown as .mov with a picture icon in my Movie Folder while the other 2 exported with chapter markers are also shown with .mov but with a QuickTime Movie icon.  Although these with Quick Time Movie icon are not accepted by the idvd, I still can burn them through the dvdproj file, but the product can be played with computers only.
    I know I must have done something wrong but I don’t know what it’s.  Some one is kind enough to help please.
    Thank you.
    puisum

    pui sum wrote:
    First of all, thank you folks for the responds.  I check back as suggested and found the following: -
    Hi Al
    All the Chapters Markers are more than 2 seconds apart and are more than 2 seconds from start points; all sequences are well butted without any gap in between.  However there are markers marked a few frames after the sequences started, which means the previous sequence ended a few frames before the Chapter Markers.  If this is overlap, what should I do from here?  Please walk me through.  Thank you again.  puisum
    Hi MartinR
    I am sure you read my response to Alchroma. You both having valuable points.  Now, this is a very good question “if I nest the sequences”. To be honest with you, I am not 100% sure what I did (because this project have been sitting in my computer for 9 months) I but I think I start the entire project with only one sequence at the beginning and I use copy & paste to make the 8 sequences after I put in the chapter makers.  At this point, I have found some problems on the Chapter Markers and I am sure Alchroma doesn’t mind to walk me through then I will take it from there.  Please don’t give up on me yet.  Thank you in anticipation.  puisum
    The post above already has a Solved check mark on it.
    Only 1 solved and 2 Helpful are allowed per thread.
    This may help with for future posting:
    https://discussions.apple.com/static/apple/tutorial/mark.html
    The main thing is you have got the issue sorted out.
    Al

  • How do I create a new movie in iMovie 10.0.2; problem with new event

    AS many others are, I'm having trouble with imovie 10.0.2
    When I try to Create a new movie, after I select a theme, a small box opens, asking for a name
    and which Event to use.  The default event is "Updated Projects," and the dropdown arrows reveal other selections, but they are all the events that came over from imove 9.  Why won't it let me select a new event?  And what is the purpose of the Updated Projects.
    And if you'll allow one more: I'd rather use imovie 10, but it appears that my recent iphoto videos are no longer made available for use in this version when I open iphoto videos when trying to make a movie - is this correct? Thanks, jeb

    Thanks.  I now see that I need to go to File then start new event there.
    And on the "updated projects" point, I'll have to play around with that so I can understand it better, I hope. 
    But on my last point, to clarify, I can access my iphoto videos using the CURRENT version of imovie, but when I use the LAST imovie version, I can only get iphoto videos that were imported into iphoto PRIOR to my upgrading to Mavericks (at least I think that is what has happened?!).  ( and I'm using the most recent version of iphoto in all instances)  Any other thoughts on this?  Thanks.

  • Trying to import .mov audio file and burn as MP3

    Can someone point me to a thread, or be kind enough to post answer, about how I might successfully import a .mov audio file and wind up burning it as an MP3. I've been dinking around with this for too long. I can import it and end up with it in the format: MPEG-1, Layer 3. But when I burn it to CD and play it on a Sony boom box, I hear nothing. I tried playing it in another iMac and hear nothing.
    Thanks.

    I was hoping someone in this forum could point me in the right direction to a web site that is designed specifically for Garage Band users that need sound effects.
    Check out:
    http://www.macjams.com/
    http://www.thegaragedoor.com/
    These both are GarageBand-oriented.
    Also, check out:
    http://www.loops4free.net/
    Maybe you'll find something useful at one of them.

  • Idvd won't burn dual layer movies

    Hi. Can someone help me figure out how to make my idvd burn dual layerd movies? I've done everything the same as I always have and it still won't do it. Do I need to buy something other than Sony discs? I'm at my whits end. Any ideas out there?

    sherryle wrote:
    what is a screen shot?
    <http://en.wikipedia.org/wiki/Screen_shot>
    Read the intro and the Mac OS X section. When you compose a post, you may add a screen shot by clicking the camera button and following the instructions.
    Under the cricumstances, I think it's better to start a little further back.
    Quit all apps and restart the Mac.
    After you've logged back in, first check how much free disk space you have. In Finder, select your hard disk and choose File > Get Info. Look at the General section (if it's not expanded, click the disclosure triangle to the left of the word "General". Check the figure for "Available". If it's not al least 12GB, you need to clear up disk space. You should have at least 12GB free disk space to proceed. (This is not a carved-in-stone figure, but something that should keep you on the safe side. More is better; but there's no need to exaggerate.)
    Next, let's check the drive. Press the Option (⌥) key and click the Apple () menu. The first item on the menu should be "System Profiler…" When System Profiler is up and running, under "Contents" you should see the line "Hardware". If it's not expanded, click the disclosure triangle to the left of the word "Hardware". A few lines down, you should see "Disk Burning". Click on it. You should get the details of your DVD drive. "Burn support" should say "Yes"; "DVD-Write" should say "-R, -R DL, -RW, +R, +R DL, +RW". If all that is correct, quit System Profiler.
    Next, start iDVD. If no project is available, it should show the opening dialogue.
    Click on Magic iDVD. In the Magic window, type a short name for "DVD Title". Let's say, Test.
    Drag your movie to the "Drop Movies Here" strip.
    On the bottom right there are two buttons, "Create Project" and "Burn". Click the "Create Project" button. iDVD should generate and save the project. The Project window should appear.
    Choose "Project Info…" from the Project menu. Check the choice for "DVD Type". It should be "Double-Layer (DL) - 7.7GB". If it isn't, make it so. Close the Project Info window.
    Now choose File > Burn DVD… Make sure the DVD you insert is indeed a DL (it should be marked as such, and the label should say something like "8.5GB data").
    If it fails as before, you should return to the project window. This time, choose File > Save as Disc Image… Save it to a convenient location.
    Open Disk Utility. Choose Images > Burn…, select the image saved in the previous step, and try to burn it. If it works, then the problem is with iDVD. (Keep in mind that a DL disc burned with Disk Utility may not work or may cause problems in a DVD player. This is only a test to try to isolate the problem.)
    If it doesn't work with Disk Utility either, then the problem is with the drive or the disc. Reset the SMC and try again.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    <http://support.apple.com/kb/HT3964>
    If it still doesn't work, try a different brand of discs, from a different manufacturer (and preferably manufactured in a different country).
    If several brands of discs fail, then the problem is likely with the drive. Get a lens cleaning disc and use it to clean the drive. If that still doesn't solve the problem, then it's probable that the drive is damaged and should be replaced. If the drive is old (4–5 years) the likelihood that it's damaged increases.

  • I upgraded to yosemite and iOS 8 in order to record with quicktime. But when I select Record a new movies I immediately get an Operation Could not be completed error.

    I upgraded to yosemite and iOS 8 in order to record with quicktime. But when I select Record a new movies I immediately get an Operation Could not be completed error. When I choose record audio or screenshots, I get a little further, but as soon as I select my ipad as the source I get the same error message.

    You don't need to be a developer for this to work. I get the same error. Just one more thing on the list that make me upset more and more with Apple. Things just don't work out of the box like they used to.
    This new feature was to be included with iOS 8 and Yosemite.

  • Quicktime not recording audio in New Movie Recording

    Audio is not recorded when using an audio interface as the input in New Movie Recording, but records fine when in New Screen and Audio Recording. Using my laptop's internal microphone is fine, cannot work out what the problem is, as it has worked absolutely fine in the past, but has stopped.
    Sound can be heard and the volume meter in Quicktime responds to sound coming in, just doesn't record at all in that mode.

    Are you launching Captivate with Run As Administrator privilege?
    If one of your co-workers logs onto your PC with their user profile, does the same microphone that doesn't work for you work OK for them?

  • Trying to create a new movie.  It tells me to name my movie, and the only event choice is the last movie I made.  I don't want it there.  I'm lost and I'm just starting.  Not sure I like the new version.  Any help out there?

    I'm trying to create a new movie.  It tells me to name my movie, and the only event choice in the drop down menu is the last movie I made. IMovie Library is greyed out. I'm lost and I'm just starting.  Not sure I like the new version.  Any help out there?

    peggy818 wrote:
    … I'm lost and I'm just starting.  Not sure I like the new version.  …
    have a read in the Manual:
    http://help.apple.com/imovie/mac/10.0/?lang=en#mov755717b21

  • How do I upload a new movie onto my iPhone without having to sync it with iTunes?

    I am new to iPhone and all this syncing is so frustrating and time wasting!
    I am using iTunes on the same computer and every time I want to upload a new movie, video or anything else, iTunes keeps telling me that I am changing libraries and that it will completely wipe out everything from my iPhone. why does this happen? how many libraries are on my iTunes? I am using the same apple id on the same computer and it still wants to delete everything from my iPhone? Is there a different library for EVERYTHING on my phone?

    as I explicitly wrote in my first post:
    of course my iPhone is already synced to the same computer!
    I wanted to add a movie on my iPhone today on the same computer and through the same iTunes that I already synced my iPhone with and when I wanted to upload the movie onto the phone it told me that I am now using a different library and that everything on my phone will be deleted. I also tried to do it manually because I don't want to waste time by backing up the phone, erasing everything from it and then putting it back onto the phone, and iTunes told me the same thing: that I am using a different library etc etc.
    the other day I wanted to put a new ringtone on my iPhone and iTunes did exactly the same thing!
    how can I be using a different library on the SAME COMPUTER and on the SAME iTunes for different things that I want to put on my iphone?
    another thing:
    if using iTunes indeed were as simple and as easy as you say it is, then there wouldn't be as many complaints about it as there are. also: calling someone ignorant just because they don't want to be bothered by the restrictions, complications and unfriendliness of iTunes is pretty lame!

  • Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

    Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

    Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
    I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
    BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly.

  • HT5287 If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?

    If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
    Or am I missing the bigger picture?

    As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

  • I am buying a new Dell PC with Elements version 12 pre-installed.  Then I have move my Elements version 5 to the new computer.  I need to know any pre-cautions, suggestion that you have.

    I am buying a new Dell PC with Elements version 12 pre-installed.  Then I have to move my Elements version 5 documents to the new computer.  I need to know any precautions, suggestions, etc. that you may have.

    this is for pse 6 or latter, but there may be something useful for you,
    Use Backup, Restore to move catalog | Organizer | Elements 6 or later

  • My  iDVD  does  not  burn  the  movie.  It  ejects  DVD  before  finishing  burning.

    My iDVD  does  not  burn movie  on  DVD.  It  ejects  the  the  DVD  before  the  burning  is  finished!  Does  anyone  know  what  the  problem  is?

    Try cleaning the Superdrive and performing a SMC reset:
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964  and
    http://support.apple.com/kb/HT1237?viewlocale=en_US
    Resetting your Mac's PRAM and NVRAM:
    http://support.apple.com/kb/ht1379
    If you are using a Wireless Keyboard:
    http://support.apple.com/kb/TS3273
    Then reboot your Mac and try again.

Maybe you are looking for

  • Integration of SSO with Third Party Application

    Hello Colleagues, I have requirement where I have to integrate SSO with a third party application. After some R & D I found out that there is some one class "SSO2Ticket.java" which can do that or help in verify the ticket. Since I am new to this area

  • Configuration Files for AEX: How to change between multiple configurations?

    I have both an Airport Extreme and and Airport Express at home. The Extreme is used for my wireless network at my house and the Airport Express is used for streaming Airtunes. I want to use my Airport Exress as a base station when traveling (to my pa

  • Cannot install premiere elements 10 on my new macbook pro

    cannot install premiere elements 10 on my new macbook pro.  keep getting exit code 7 half way through installation and disc ejects. running OS X 10.7.2 (lion).  have installed acrobat reader, flash player, tried safe start mode...nothing works...HELP

  • OC4J and Reports

    I want to access some reports that I built in Reports Builder with the OC4J that comes with Reports Builder. The reports access a MS SQL SERVER 200 database and I wish to use the Microsoft JDBC Drivers. I have had no success yet. They work fine in Re

  • Can hear but not see movies from my Casio Exilim 7.2

    Movies shot on my Casio Exilim 7.2 mega pixel camera open up in QuickTime, but I can only hear them, not see them. The files from the camera are .AVI files if that helps. Wondering if I am missing something. I went to the 3rd party software page, but