Idvd not keeping aspect ratio when burning dvd

Ok, what I am doing is creating the project in Final Cut, exporting using quicktime conversion (everything up to this point is 16:9) then I go to iDVD and what I need is a dvd that has no menus at the front or the end of the project, and it plays upon start. So I go to iDVD >file>onestep DVD from movie>select movie then insert dvd and it burns, But it burns it as 4:3, not the 16:9 I saved it as. I see nowhere to change this setting. Am I limited to only doing 4:3 projects with this type of dvd?

I'm very surprised that if you followed the references I gave you, you are still having problems.
Another solution is to use something called Anamorphizer that sets the file's widescreen flag so that it is recognized as anamorphically squeezed widescreen.
Get Anamorphizer at http://homepage.mac.com/sith33/FileSharing34.html
Make sure Quicktime 7 is open before you try Anamorphizer. (NOTE: You MUST use Quicktime 7 and NOT Quicktime X)
Place a copy of your movie clip in a new folder and drag that clip over the Anamorphizer icon. This should create a second file in that folder that start with Anamorphic- This is the reference movie you drag-and-drop into iDVD. Note that your clip in that folder (which is the movie the reference movie points to, must not be moved or deleted).
What I do is air projects on our local school board channel and just realized that idvd changes my 16:9 to 4:3 when doing the idvd> file>one step dvd from movie option.
BTW, how does the DVD play in your computer? There may be an issue with the school board channel playback.

Similar Messages

DVR620 incorrect aspect ratio when recording DVD or VHS

I have a DVR620KU connected to a Sony Digital LCD Bravia TV, Sony HT-CT100 Home Theater system and a Scientific Atlantic Explorer 8300HDC cable box. I am using HDMI cables except for the connection from the "out" on cable box to the "in" on the DVR620. When recording from a broadcast program or DVR'd(cable box) program, the picture on the TV while recording, and the DVD or VHS recording when played back, have letterbox like bars top and bottom and the aspect ratio for the picture is stretched. I have tried eliminating the Home Theater system, but that doesn't help. Other than that, things work as they are supposed to, including viewing a commercially recorded DVD.
Thanks in advance for any suggestions.

It does mean that the DVR620 is not the problem.
I don't have the same cable box as yours. Mine is an Explorer 4250HDC. Even if they were same, however, I believe different cable systems will handle things differently.
I'm on Time-Warner Cable in central NC. I have that big universal remote model URSU-8800L-TWR.
When I press SETTINGS, I get the Settings menu. On the bottom of the screen is Quick Settings. If I press right arrow several times, I get to High Definition. The choices are AutoHD, Picture Size, Aspect Ratio, and Output Resolution. The choices for AutoHD are on/off. I'm using on. Picture Size are Zoom, Normal, and Stretch. I am using Normal. Aspect Ratio choices are 4x3 and 16x9. I am using 4x3. Output resolution should probably be 480i for recording to the DVR620. Note that on the NBC channel currently there is letterboxing on the top and bottom. There is no distortion or stretching. I don't see a way to avoid the letterboxing.
Part of the problem with making these changes is that they will affect all output from the cable box, so your HD signal to your TV might not be as good.

Aspect ratio when putting dvds onto AppleTV

I've been using a program that puts my dvd movies into mp4 format but when i play them on a widescreen tv, theres the black bars but not at the top and bottom. they are on the sides. Its really bad when i play a widescreen movie because theres the bars at the top and sides so the movie just looks like a little box. Any ideas on what kind of settings I should use? Haiulllp!!!

If you play them back via iTunes do they look the same?
The actual aspect ratio will also be important as if they are 4:3 movies you can expect the bars at the sides. If they're widescreen movies then remember many films will also have bars top and bottom as they are too wide for 16:9 TVs.
Also be aware that the way your TV processes widescreen signals can vary - different ones have different options which will attempt to fill the screen/zoom or show as 4:3 even. That's why I'm asking how it play in iTunes as if it looks OK there you may need to address settings on the TV too.
I converted a recorded film recently and it had the same - bars at sides/top and bottom which was odd for a letterbox picture - all became clear after about 10 minutes when the letterboxing disappeared and the rest of the film was broadcast 'pan and scan' 4:3, so even the letterboxed start was actually encoded as '4:3 at broadcast!
AC

Option to keep aspect ratio when scaling pictures

If I place a picture object on the report and change the size or scaling I woul like to have an option to keep the original aspect ratio. I've seen other products that have this feature. I use the ole object with a graphic location value (from DB field) so different pictures may appear based on data. Unfortunately the original pictures are not all the same size so pictures end up skewed when trying to fit.

I meant for this to be in feature request thread. Not sure how to move it there or atleast delete it.

Resizing Image and Not Keep Aspect Ratio

Is there a free program to resize images and not keep the original aspect ratio?
I need to resize loads of images to 100x100 pixels and have tried Image well and IResize yet they do not seem to have an option to not keep the original aspect ratio.
Thank you
20" Intel 2GHz Core Duo imac, 2GB Ram, 250 GB HD

Hi, Downsize does not seem all that great according to reviews. Why not see if you can buy PS E' 3 mac -- maybe ebay/amazon (if I remember I only paid about $70 for PS E3) As PS E4 just came out I'm sure someone has PS E3 for sale. You will then have no problems completing your image resizing.
2 other questions for you..are you using the Mac side of your intel or Windows?
if your using the Windows side I can let you have PS 6 (PC) ..freegratus.

IDVD not changing aspect ratio to 4:3

Hi -
I'm fairly new -- last week, I edited a 50 min video in Final Cut Express, exported it as a quick time movie, imported into iDVD, chose one of the new 16:9 themes, got the message re: whether I want to keep my 4:3 project as a 4:3 project, clicked keep, and got a good finished product.
This week, same client -- another 50 minute video, same procedure as last week, but when I burned the DVD, I got a "widescreen" rendition. Did the selection option under "project" -- but no change. Viewed the video in quicktime and it looked fine. Looked at the preview in iDVD but it was widescreen, and showed the green "widescreen" banner in the lower right hand corner. I tried other themes, including the older 4:3 versions, but still -- got a widescreen preview (which I believe, without burning through a stack of DVD's, will produce a stretched widescreen version.
I'm using iDVD 7.02, FCE 4.0, OS 10.5.4, on a 2.8 ghz 24" iMac core duo. I'm totally baffled - cuz I don't think I did anything different between last week and this week - and the client wants to know where the DVD is. arggh.

After spending many, many hours - I fixed the issue. I bought Roxio Toast 9. Problem solved. Deadline met.

IDVD not keeping 4:3 aspect ratio

I finished a project in FCP in 4:3, burned a QT that is 4:3, and brought it into iDVD. I tried using a theme that is widescreen (and keeping my 4:3 aspect ratio when prompted to choose 4:3 or 16:9), and I made sure that 4:3 was selected in the iDVD project information; but the preview and burned DVD were 16:9 and distorted. I then tried using an older iDVD theme that is 4:3, checking the project info again, and the preview, and DVD burned, were also 16:9.
what gives?

Thank you for clarifying, but I tried that first, after I originally read the instructions. They read that I'll "get a second file in the same folder with Anamorphic added to the file name", which did not happen, so I thought that perhaps I had done it wrong, and that perhaps I needed to "open" the application.
I am dragging a QT movie that I've exported from FCP. I assume that is correct; the Inverse-Anamorphic directions are a little vague in that area: "Export your video from FCP like you normally would for going to iDVD. Drag and drop it on the Anamorphicizer."
What do you mean by a "reference movie"?
Thanks.

How to keep original aspect ratio when cropping in Camera Raw?

How to keep original aspect ratio when cropping in Camera Raw? Cant figure it out! With shift, the aspect ratio is 1:1. But I didnt set it to 1:1 (I checked "normal").

The Shift key works once you’ve set your crop ratio. DSLRs would typically do 2:3 and others sometimes do 3:4.

Unable to obtain full screen when burning DVD

I have a trial version of Adobe Premiere Elements
8. When burning dvd and then playing on my tv through dvd player I am not getting a full screen. The wide screen video covers about 3/4 of the screen instead of the entire screen. The settings I am using are NTSC widescreen dolbyDVD, and Quality is checked with no changes in quality. The preview screen is set on a magnificatgion fit. The Video is centered on the preview screen. I have spent hours trying to resolve this problem? I have a trial version and not sure if want to purchase with this problem.
I tried to upload the 8.01 up grade and my computer just blinks on and off; will not load?

I have been having the same problems. See my discussion threads on aspect ratios in the past few days.
Let me share my thoughts on this. Apparently Elements 8 is optimized to work on 4:3 CRT TV's; HD flat screen TV's must not have made much penetration in India yet. So when you set the output for NTSC widescreen, what Elements does is compress the widescreen data into a 4:3 frame, squeezing the image horizontally. Counterintuitively, what you have to do is select NTSC normal. Then Elements does not further squeeze the widescreen data. What it then does is fit it into a 16:9 letterbox, still containing the left and right bars, within the 4:3 frame. Set the DVD to playback in widescreen mode, which expands the letterbox image to full width of the TV, though retaining the left and right bars, then zoom the TV image to full the screen, to eliminate all the bars top, bottom and sides. Worked for me, but I used a SD camcorder set to record in widescreen.
A better option might be to change the default pixel aspect ratio, which I am yet unable to effectuate.

Can I maintain original aspect Ratio when making web Quicktime video

Hello there,
I have to convert at 16:9 Premiere file I originally made for DVD into a web ready format. Can I do this without distorting the image? In other words, I want to reduce the file size and keep the proportion intact.
Also, for future reference, what is the optimum aspect ratio when creating video content for web with Premiere?
Thank you in advance for your help.
M

Thank you Jim. Sorry for not replying sooner; I've been offline for a couple of days. Your reply is helpful and I'm
happy I won't have to squash my original 16:9 format movie to put it online.
Martha

Hardware Error when burning DVD's

I keep getting an error message when burning DVD's using Toast Titanium on my iMac..it reads:
"Drive Reported an error, Sense key = hardware error, sense code = 0 x 03."
Twice after getting that message I couldn't continue to burn and it stopped, once it did continue to burn and finished successfully. Any ideas, anyone?
17" iMac G5 w/ iSight Mac OS X (10.4.3) upgraded to 1GB RAM

I get the same message today when burning from Toast 7.02 on my iMac. It happened when I was trying to make an audio CD from my iTunes collection (not when Copying from CD to CD). The exact message I got in the middle of my burn was:
The drive reported an error:
Sense Key = hardware Error
Sense Code = 0x03, 0x01
I tryed again with another CD and got the same thing. I never had a problem with these CD's (TDK CD-R up to 48x).
I wonder if there has to be some sort of software upgrade fro Roxio Toast or is this a superdrive malfunction/etc. My Superdrive gets very loud during this burn as well. I may take it in to Apple Genius Bar. Any ideas?

How to keep aspect ratio for different sized resolutions?

If I have a 1280 x 800 resolution widescreen moniter, and I have this fullscreen game that likes to run in 800 x 600 but I don't like the way that the game stretches across the whole widescreen moniter. The only way for me to keep everything in a good aspect ratio is to put my resolution at 1280 x 800 but the game doesn't like that.
Would there be a way to set it so that the 800 x 600 resolution is set to have the correct aspect ratio rather than being stretched across the widescreen? ie, so it looks like a square with black spots on both sides.
I heard that a modeline generator would be the thing I want, but I'm not sure how I should go about this stuff. If you have any reading on it, please give it to me.

Thank you very much. I never thought to look in the BIOS.
There wasn't an option to keep aspect ratio and stretch but I was able to center it rather than stretching.
Now my framebuffer boot up got centered, I need to find out how to make the framebuffer bootup be 1280x800 rather than 1024x768. This should be simple, but the guide in the sample menu.lst only gives square-y resolutions.

I'm getting "runtime error: unknown exception" when burning DVDs on PE12

I'm getting "runtime error: unknown exception" when burning DVDs on PE12

Some of this may be for Premiere Pro, but SHOULD also help with Premiere Elements
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
Also http://www.microsoft.com/en-us/download/details.aspx?id=14632 for a Microsoft download
Also search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US for Microsoft help articles
Set your Premiere Elements DVD output to a folder on your hard drive and then use the FREE Imgburn to burn the folder to disc for DVD... Premiere Elements does NOT burn to a folder for BluRay (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons... Set Imgburn to use the slowest burn speed your drive and media will use... I set my burn speed to 1x and let Imgburn adjust to the actual minimum

Keep aspect ratio?

Hi,
I created custom component(polygon) in Flex Builder, compiled and added to my add-ons.
I got my custom component on stage in Xcelsius.
I would like to keep aspect ratio of my custom component during resizing?
Please check Spreadsheet Table component. Spreadsheet table and resize handlers keeps aspect ratio during resizing.
How can i accomplish this?
My thoughts:
I could do this by adding mouse down and mouse move event to stage area. When user starts resizing component(mouse down pressed, mouse move dispatched) I could just simply calculate and change component minWidth and minHeight.
Can I add events to stage area? If yes what kind?
[Mariosh | http://mariosh.com]

I agree it would help productivity if there were a "sticky" setting on the crop selections.
In the meantime (assuming Adobe will eventually change this) you can use Synchronize or Copy Settings to apply a crop ratio to multiple images.
There are a couple minor glitches/bugs using this approach :
After synching, the crop size on the toolbar shows "Custom" rather than the actual ratio you set. I think it should display the chosen ratio, as it does when you choose a setting from the list.
If you copy/paste, the ratio improperly shows "Original", and the list also shows "Original" checked. But the crop frame tool on the image correctly shows the pasted crop ratio. I've found you have to go back to grid view and return to develop to set it properly. Confusing, at best.

Exported slideshow from Iphoto11 to IDVD 7.12 so I could burn DVD for play on DVD player. Fine but show stops 1/2way through because DVD has 2 chapters. How do I eliminate chapters?

I exported slideshow from Iphoto 11 to IDVD 7.12 so I could burn DVD for play on DVD player. Fine, but then when playing on DVD player show stops about 12 way and starts over. Seems there are 2 chapters in show. I wan t show to play straight through until end. How do I elimiante chapters or solve problem. Thanks. Bob Low

Try this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
Play the disk image with DVD Player and see if you get the same start over half way thru.
Did you create the slideshow in iPhoto in the slideshow mode?
or were you in an album and then used the Share ➙ iDVD menu option? What I'm trying to find out is if the slideshow in iDVD is a movie file or an iDVD slideshow with the photos from iPhoto? If it's the latter how many photos in the slideshow?
OT

Idvd not keeping aspect ratio when burning dvd

Similar Messages

Maybe you are looking for