IDVD not working with Canon HV20

I am trying to do a one step DVD with iDVD and my HV20 camera. When I click on the one step DVD it gives me the message to connect my camera an put it in VCR mode and insert a DVD and press OK. No I have the HV20 in Play mode and after I click on the OK put it goes back to the iDVD startup screen. I launch iMovie and it sees my HV20 no problem. Any ideas?

I sure hope so. But don't hold your breath. (Apple seems to be on the fast lane toward streaming video as opposed to burning it to Dvd-R or to a blu-ray disc).
Btw, You might have better luck with Roxio Toast 10 Pro. I don't think the folks over at Roxio have ever heard of a bag of hurt. Their software simply works.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

Similar Messages

  • Macbook pro is not working with Canon pixma iP1500, but has previously.  The printer works with an old PC without trouble.  "printer is offline" message when this printer is plugged into macbook.  Any clues to get it to work?

    Macbook pro is not working with Canon pixma iP1500 but has previously.  Printer works with an old PC but macbook shows "printer is offline".  Any clues?

    Hello Betty7,
    Please let me take a moment to say "Welcome" to the HP Forums.
    I hope you enjoy your experience!
    I see that you are having an issue with getting the printer reinstalled. 
    I suggest that we start off by running the HP Print and Scan Doctor.  If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My auto focus does not work with Canon 60D. Is it because of the camera or the lens?

    My auto focus does not work with Canon 60D. Is it because of the camera or the lens?

    I had the same problem. I make my AF work going to Menu / AF mode and selected Live mode. On Quick mode the AF did not work. I change the settings without realise it. Now my AF is working fine.

  • Image Capture not working with Canon LiDE 500F

    Image Capture version 6.0.424 and CanoScan LiDE 500F 11.2.5.0 does not work properly.
    Regardless the resolution, the resulted file has a very small size.
    As a test I scanned a 9x20cm document at different resolutions and for all resulted files 'Get Info' reported small dimensions: 69x147 pixels. It is interesting that the size of the file varies with resolution, but when opened in Preview or Acrobat Reader, the small size is used.
    As for other reports, CanoScan Toolbox works properly.
    Regards,
    Liviu

    Hello Liviu,
    There has been a couple of posts regarding the same issue with Image Capture. Have a look at this one for example.
    http://discussions.apple.com/watches!add.jspa?forumID=1344&threadID=2272250
    As I stated in this thread, I do not have this problem with Image Capture and my LiDE 200 or my MP980 AIO. So there must be something with the drivers used by these older model of Canon scanners when using Image Capture.
    I haven't seen anyone provide a solution as yet so you may need to escalate this to Canon if you have a need to use Image Capture.
    Pahu

  • Mac will not work with Canon EOS cameras

    My imac OS X 10.6 is not working well with my Canon EOS 5d Mark II camera on the tethered mode. The camera works well with other Mac computers, and I have spent hours with Canon tech help. It now seems that the issue may be with the computer. The EOS Utility is working, everything has been updated, all Canon checkpoints look good, but when I use the camera, the image does not transfer. And then everything gets locked into a loop and I have to crash the camera and force quit the program. Is there something in the computer that may be blocking the transfers? any ideas where to look? Canon has done everything on the camera side, but I don't know where to begin with the computer.

    OH, ok. So the issue is with transferring the image from the camera to the computer. Since you said you have done everything possible with canon, the camera's firmware is completely up to date, you have the correct software installed. Since you say no cameras work with this computer I am inclined to say the problem is from the computer, which is why the problem exists. I'd do an apple hardware test and see if anything turns up. Clean install of the canon software would also be a good idea.

  • Airplay not working with canon mx456

    i can not get my canon mx456 to connect to my ipad air i will work off my laptop but will not connect to the ipad can any one help or have any tips too get it working?
    thanks

    AirPrint?
    Have you tried the troubleshooting steps from the AirPrint Knowledgebase page:
    If you are unable to print, or if you see the message "No AirPrint Printers Found"
    Verify that the printer:
    Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
    Is connected to the same Wi-Fi network as the iOS device.
    Has the latest firmware version installed.
    Has paper with enough ink or toner installed.
    Is free of any errors displayed on the printer's control panel.
    If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.Notes:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the AirPrint printer is connected to the Wi-Fi network before attempting to print.

  • Camera Connection Kit Not Working with Canon Rebel

    Using the connection and the Canon Rebel SRLD, I was not able to transfer pictures to the iPad.
    I was able to transfer pictures using the memory card.
    Not able to transfer pictures from the 3G iPhone.
    Should I take the connection kit, the camera, and the iPad to an Apple store to see why it's not working, or does anyone have any solutions.
    Thanks,

    The cameras connection kit does not support the iPhone 3G.
    http://store.apple.com/us/product/MC531ZM/A?fnode=MTc0MjU4NjE&mco=MTc0Njk4NzU#ov erview
    It does however supports both the iPhone 3GS and 4.

  • WHY FCS WILL NOT WORK WITH CANON XH A1, NOW, EVER, ANYTIME? HELLOOO APPLE?

    Well well. Trillions of dollars in Apple technology and canon ingenuity and yet these two behemoths of electronics and computer commercialism cannot create a simple easy to sue interface for a freaking Canon XH A1 camera. I have read forums, googled "compatibility issues", talked to friends, emailed people, and yet no one has stepped up with any assistance in this matter. What really hacks me off is that after spending thousands of dollars on Apple products, and numerous combinations of Final Cut Express, Pro, Studio, I have spent the better part of two weeks doing fresh installs, plugging fire wire cables in each and every port, trying numerous Canon cameras, and still, here at 633 am after all of this, my wonderfully complex Final Cut Studio now tells me that although it "knows" a camera is connected via fire wire, it does not recognize and will not initialize my camera. Furthermore, earlier this week when it DID recognize my camera, the video imported was forced to create clips which stopped a meaningless in and out points. In addition, the audio drifted from one second, to 1.5 seconds, and so on and so forth. Ladies,gentlemen, scribes, aficionados, and causal observers here this: I am officially fed up with having to work harder at getting my project ready to edit, than I ever did actually editing the project. This is sad, sick, silly and stupid. I don't know what's next blokes. Vegas Pro? Avid? I am just worn out by the numerous fixes, upgrades, work around, plug ins filters and tech experts who still can't tell me why Final Cut Studio will not simply let me import my freaking video. I'm done with this silliness. Goodbye Apple! Goodbye Final Cut! I have better things to do with my life than researching subjects that have more contradictions than a rubics cube. i am going to get some sleep, spend time with my wife, and get some fresh air. I hope my apple implodes, and I'll use the FCP disks for coasters when I am sipping my cold brew. ARGGGGGGHHHHHHHHH!

    i jsut came across your posting. I have never replied to a posting before but i am in your case. I use the saem camera you do and had the same problems you are facing with your setup. I spent days and hours trying to figure out my problems. Finaly i read that you could reset the camera. And I did and it worked. Open the view finder on top of the camera and you will see the tiny reset hole. Stick a pin in there for around 15 seconds and that should reset it back to the factory settings. I think you have played with too many settings on the camera and it is jumbled this is waht happend to me. then go into final cut, but do not attatch your camera yet and click on the EASY set up tab and set your importing to match what ever you shot your video at. You cannot 60i video on a 30f setting they have to be the same.
    Alex
    P.S.
    Please look at your manual for reseting your camera, I am just going off memory and it has been two years when I reset mine. Here is some of the video I have shot with my Canon(W/Final Cut) Click onh the HD button if you have a fast connection.
    http://www.youtube.com/watch?v=7g-p-Ok5uJw&feature=channel_page

  • Camera Connection Kit not working with Canon G12

    Hi there,
    I was wondering if anyone can help me...
    I just purchased the iPad Camera Connection Kit and when I plugged both the SD card and USB connectors in with the appropriate divices connected, and turned on, neither worked. Absolutely nothing happens.
    My iPad picks up the CCK in the 'about' section in Settings but the Photo App did not load when the connectors where in. I am thinking it has something to do with my camera/SD card
    Information:
    iPad - Generation 1, Version 5.1.1, 16GB
    Camera - Canon G12 Power Shoot. It has Picture Transfer Protocol
    SD card - SanDisk SDHC card 4GB
    Also, the camera saves the photo files in the DCIM folder with 8 characters, e.g. IMG_1234
    Any help would be greatly appreaciated.
    Many thanks,
    CJ

    I cannot find these settings anywhere on my camera or in the manual.
    I had to do some searching on the internet just to find out it had picture transfer protocol. I am struggling to find answers about the G12's PTP or Mass Storage.
    Sorry...

  • De-noise on iPhoto not working with Canon camera pictures

    When I try to use the de-noise option in iPhoto on some pictures taken with a professional camera (Canon), it does not de-noise the picture.
    I tried diffrent stuff to see what works and what does not:
    - If I use a picture taken from iPhone / iPad, in iPhoto de-noise works
    - If I take a professional picture, send it to my iPhone and resend it on my Mac, the de-noise will work
    - If I use a professional picture on my Mac desktop, de-noise works as well.
    Just not in that initial circumstance ... Strange !! Help ?!

    How does this
    When I try to use the de-noise option in iPhoto on some pictures taken with a professional camera (Canon), it does not de-noise the picture
    differ from this?
    - If I use a professional picture on my Mac desktop, de-noise works as well.
    OT

  • Does Lion not work with Canon scanners?

    I have an old Canoscan N1240U. Although the Canon website offers software downloads for this under Mac OS X they are for Power PC. Is there anything else I can do?

    I have a relatively new Mac Mini running Lion and a Cannon LIDE700F. I have found that if the Mac goes to sleep, Image Capture will give an error when I try to scan.  The only fix I could come up with was to unplug and replug the scanner USB connector.  I was initially convinced that this was a Cannon driver issue, but I have discovered that if I open Adobe Photoshop Elements and ask it to scan an image from the Cannon scanner, it will do so (evidently resetting the USB port).  After that I can open Image Capture and the scanner works as if I had unplugged and replugged the USB connector.  So I now believe that it is an Apple issue with Image Capture.
    Hope this helps somebody.

  • IMovie not compatible with Canon HV20?

    Can't get my iMac to recognize my HV20. Anybody else have one and able to explain if I'm missing something? Got a firewire cable, plugged it into the HDV/DV port on the camera, turned it to "play" and I'm getting nothing. On the camera, no matter if I set the output to DV or HDV/DV, the mac doesn't see it.
    Canon's website says I shouldn't need anything for OS X support.
    About to head upstairs to my windows box to see if it'll see it.
    Any suggestions? I'd much rather use the mac for vid capture than my windows computer.

    ... it certainly makes me wonder about your compute setup. Do you have any other Firewire devices connected to your computer when you are trying to make the video transfer? I know some earlier Canon DV camcorders wanted to be the only Firewire device on the bus during transfer.
    Macintosh: FireWire Issue With Some Canon Mini-DV Cameras at http://docs.info.apple.com/article.html?artnum=61603
    iMovie: Cannot see or control camera at http://docs.info.apple.com/article.html?artnum=43000 has a lot of good information!
    F Shippey

  • Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

    need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

    Try with the latest Apple driver package for Canon (released 15th Feb):
    http://support.apple.com/kb/DL899
    This solved my problem with the printing.

  • Canon Pixma MP-540 (and other) does not work with Cups 1.4

    Since Cups 1.4 my printer does not work
    its 100% about Cups 1.4 beceause after an downgrade to 1.3 it worked perfect. After upgrade to 1.4 again nothing worked.
    So my question, could there be maybe a package called cups-legacy. I heard about other Canon printers + non canon printers which not work with Cups 1.4 in case of binary distributed drivers

    I had a similar problem with my MP780 and solved it by adding a custom udev rule. See http://wiki.archlinux.org/index.php/Cup … ermissions. This is my udev rule:
    SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="04a9", ATTR{idProduct}=="1707", GROUP:="lp", MODE:="0660"
    and lsusb output:
    Bus 001 Device 003: ID 04a9:1707 Canon, Inc. PIXMA MP780 Scanner
    . Hopefully this will be fixed by hal/devicekit/udev upstream but it all seems a bit of a jumble atm, to me anyway.

  • Canon Selphys not working with Gutenprint

    Is there anybody who can confirm that a Canon Selphy (any model) printer (sublimation) is really working with Guteprint drivers (comes with Snow Leopard)? Because there is reports everywhere that they are not working:
    http://discussions.apple.com/thread.jspa?messageID=10078893&#10078893
    http://discussions.apple.com/thread.jspa?messageID=10028860&#10028860
    http://discussions.apple.com/thread.jspa?messageID=10167685&#10167685
    http://discussions.apple.com/thread.jspa?messageID=10163518&#10163518
    Mine is not working with Gutenprint either. I have Canon Selphy CP-740. I downloaded even the newest gutenprint drivers (5.2.4) but no.
    http://gimp-print.sourceforge.net/MacOSX.php
    I have the exact same symptoms as in the first three post in the first thread above: The driver reports that it's 100% ready, but nothing happens. With the updated 5.2.4 it takes the paper inside the printer and then stops there!
    Of course I got it working with the original (old) Canon drivers from Canon's homepage, like some other people on those threads. But the Canon driver is not nearly as good, because there is so darn few adjustments. Gutenprint would have been much better.
    So - Is there any Sephys out there actually working with Snow Leopard's Gutenprint drivers?

    Hi ANinnovation!
    Thanks for posting! Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers who are in your area!

Maybe you are looking for