IDVD replaces photos in drop zones

Hi. I have iDVD '08 and I burned a dvd. I was using the "Revolution" theme. It had a picture of my cousin in one of the drop zones. After I burned the DVD, I viewed it in my dvd player and the drop zone that had a picture of my cousin now had a picture of one of my cats. I don't know if I did something wrong, but I made sure it was my cousin in the drop zone BEFORE I burned the DVD. I SWEAR that I did not put a picture of my cat in it. Any ideas of what happened?

You're right. There's not alot of info available on this particular issue regarding invisible slideshow photos. So let's try the following.
You say the photos are showing in the drop zone editor nevertheless ..... correct?
What happens when you add a transition (simple 3 second dissolve for example)?
If that fails to help then add music as well and then set the slideshow to "fit to audio". Post back with your results.
Message was edited by: SDMacuser

Similar Messages

Photos in DROP ZONE of iDVD 08

Hi there. I used to be able to move photos around slightly (left to right/ up and down) in the old iDVD. When I updated to 08 this is no longer possible.
After a quick search here I found someone mentioning holding down the command button when moving it - but that doesn't make any difference to me - all it does is whoosh the photo out of the drop zone and delete it.
Can anyone give me step by step / idiot guide to moving photos around the drop zone please? I am fed up with them being off centre.
S

When I hold down the Command key (Apple key) I can move the image from right to left.
If you want to move up or down, I suspect you need to crop the image so that it only shows the 'vertical information' you want to show in the drop zone.

Resize photo in Drop Zone

I have just completed my first non-PC DVD creation!!! I have run into a problem that I can't figure out, I have checked the discussion groups and I don;t believe anyone other than me has run into this: I grabbed some photos (3) from my iPhoto collection, dropped them into the "Drop Zone editor", and they are displayed on my menu, very nice, etc. However the photo is displayed so large that all you can see is my child's left eye and left forehead (for example). How can you re-adjust the photos that iDVD uses (either before pulling into iDVD or once in iDVD) so that that they are vaguely right size? I have tried left- and right-clicking eveywhere, no luck. I have tried taking one of the photos, amking a copy form iPhoto onto my desktop, resizing it down to 3 by 2 inches, adn then trying to use that "shrunk" photo - no change! Any ideas anyone..........

I used Photoshop to try different sizes until I could fit our logo just the way I wanted. The final image size that seems to work fine is 693w x 520h in pixels. Your image can be 693w but not all 520h will make it on. I had to position our logo which is roughly 260h about 1/3 of the way down from the top as the bottom part gets cut off. You need the extra white space on the bottom but not width wise.

Resizing photos for drop zones

When I drop a photo into a drop zone in iDVD '08 it stays huge and only a small part of the photo can be seen. I have resized to 768x576 as the HELP suggested but it made no difference. No matter how small I made the photo, it got blown up to a large size. I know you can move the photo a little using the command button and the mouse, but unfortunately that doesn't help much when the image is so big.
Any ideas? I'm just about ready to pull the last couple of hairs out of my head! This has never been a problem in iDVD '06
Many thanks

Changing the dpi won't help - iDVD and iMovie don't care about it. The theme displays the entire image from top to bottom (more or less), but since the window is portrait mode on a landscape image, you loose about 1/4 of the image on each side. There doesn't seem to be much you can do with it (other than not use it).
What I would do is create a 640 x480 image with a 120 pixel wide black band on either side and insert a 400 pixel wide by 480 pixel high image in the middle between the black bands. The theme should show you just about all of the image you have inserted when you place the 640x480 image in the drop zone window. I wish there were an easier way, but I've had to use such trial and error methods since I started working with iDVD back in iDVD 2 days.
F Shippey

Photos in Drop Zones not visible

Hi,
I recently purchased a refurbished iMac and have used iDVD previously, but am having trouble with it now. It's my first attempt at iDVD since I bought the computer. I'm using a 6.0 theme, Reflection Black. When I drop photos into one of the eight drop zones, the zones go black. I can see in the drop zone editor area that the photo is loaded, just not visible. The twist is that the first time I use the photo it works. But if I try to drop it in the second time, or close the saved draft and then reopen, I get a black image where the photo should be. I've searched on the help topics, and can't figure it out.
Thank you!

You're right. There's not alot of info available on this particular issue regarding invisible slideshow photos. So let's try the following.
You say the photos are showing in the drop zone editor nevertheless ..... correct?
What happens when you add a transition (simple 3 second dissolve for example)?
If that fails to help then add music as well and then set the slideshow to "fit to audio". Post back with your results.
Message was edited by: SDMacuser

Themes; Photos in Drop Zones Not full size

Please help. I'm trying to drag photos to the bumper drop zones but they won't appear full size. I've used several bumpers in my iMovie project already and this is the first time it won't work. Can anyone help me fix this problem?
Angie

Update - I realized this phenomenon is only happening on my current project, not any new projects. I tried "save as" to see if that would correct that problem, but no luck. Any thoughts?

Curl a photo (or drop zone)

I want to make a photo (drop zone for that matter) have a curve to it. As if I had a tube and wanted to bend the photo around it. I cannot seem to find a filter to achieve this. Is it possible? Maybe there is a filter but I am not using the controls correctly.
Thanks,
Brian

This may not be exactly what you want, but here's a still:
that shows the use of the Displace filter along with a gradient filled rectangle to bend an image. I used a copy of the same rectangle to provide some shading...
Here's the project so you can see what I mean...
Patrick

Drop Zone photo resize

I'm trying to create my first project in iDVD 7.0.4.
When I drop photo into drop zone, it get enlarged so much, that only a small part of it is visible.
I was not able to find neither a trick nor help how to resize it (shifting it or exporting it from iPhoto into JPG does not help).
Thanks in advance for any hint

I use Adobe PS to re-size images but most graphics apps will also work (including iPhoto).
http://www.iclarified.com/entry/index.php?enid=294
Hope this link helps but if not just come on back.

Adding pictures to a theme, but not in the drop zones...

I don't know if this is a really noob ou really tricky question, but here it goes : )
I'd like to add a/some picture(s) to a iDVD theme, but not in the drop zones. I'd like my pictures to appear as layers, choose whoch one goes in front, and so on...
Is there any way to do that?
Thx, and happy new year ; )
iMac 24' 2,16GHz CodeDuo2 GeForce 7300 GT 1Gh DDR Mac OS X (10.4.8)

In that case you would need to prepare the background as a QT movie exactly the way you want to display it as a background movie and then drag and drop that prepared QT file to iDVD.
I've never done this type of movie in iLife apps alone but I have with FCP & DVD SP which offers these additional video editing options for sizing pip and frames in an existing movie / menu.
Also check the help Menu for iDVD6 (and iMovie) if you haven't already. I did a search for you and here's what I came up with:
Changing the background image of a DVD menu
You can replace the background image in a menu with your own image. Images in menu backgrounds are cropped to fit the standard DVD window size, but the aspect ratio of the original image is preserved. If you want your image to fit the DVD window exactly, first use an image-editing application to resize the image to 640 x 480 for standard video and 854 x 480 for widescreen.
When you replace a background image, you can also choose to keep the drop zones or remove them completely.
Here are ways to change the background image:
Drag a picture file from the Finder or the Media pane to a DVD menu background, outside a drop zone. Before you drop the picture, press the Command key and choose "Replace background" or "Replace background and drop zones" from the contextual menu that appears (shown above). Then release the mouse button.
Click the Menu button and drag a picture file from the Finder to the background well in the Menu pane. If your theme has drop zones, the drop zones disappear.
Click the Media button, then click Photos. Drag a photo from your iPhoto library or another folder to your DVD menu. If your theme has drop zones, the drop zones are retained.
Choose File > Import > Image, locate and select an image, and click Import. If your theme has drop zones, the drop zones are retained.
To remove a background image and return to the default image for the theme, click the Menu button and drag the image out of the background well (shown above).
Hope this answers your question/s.
SDMacuser

Images disappear from drop zones

I'm using the "Bands" template, and I'm adding a photo to 3 different drop zones: the first one (the animated one) works fine. But when I add a photo for background on either the menu or "extras" page, it goes in fine, turns black and white and has the shading around the top edge, but when I click on another page in the DVD and back to these two pages, the image is gone and it again says "Drag Photos or Movies Here". Any ideas? I'm using 7.0.4, don't have any compelling reason to upgrade to 7.1 unless this bug is fixed there...

Hi George
Sorry to hear you are having issues with iDvd regarding background and drop zones not staying with the images or photos you picked. I just tried the very same thing you described above running iDvd 7.0.4 on a Dual G5 2.0 Ghz and I cannot duplicate this issue. Mine runs fine and exactly as expected. All choices remain in place. So I'm not exactly sure what's going on with your own particular configuration. But like you I don't recommend updating unless this issue is first addressed in the next update. My feeling is that it won't be. What you may want to do if you haven't already is dispose of the plist for iDvd. Go to your HOME folder > Library > Preferences >
com.apple.iDvd.plist
Drag and drop this file to the trash or to the desktop and relaunch iDvd.
Come on back if this fails to help. Please also let us know exactly how much available hard drive space is remaining on the boot volume (your main HDD). You may also want to repair permissions at this time from apple's disk utility.
Good luck!
Message was edited by: SDMacuser

How do you resize a photo in an iDVD drop zone?

The themes in iDVD are virtually useless if you can't easily drag a photo into a drop zone and move and resize as necessary. Using the method described in iDVD is ridiculously cumbersome but what's worse is that it doesn't work.
Does anyone have a suggestion for making this task easier? Does anyone know of better software that would replace iDVD?
This problem has been around for years. It's unbelievable that Apple allows the problem to continue.
Thanks for any help.

Thanks for the reply - I've just gotten around to playing with this some more and as you mentioned, I'm now creating a new image in Photoshop that repositions the image so that it places well in the iDVD template (soft frame in this case). Extra work, and it appears to be effective in the iDVD interface, but when I burned a test DVD the images were scaled differently in the final render to disk.
I'm not trying to do anything out of the ordinary here - just want to burn a DVD of my baby boy for the grandparents. This is precisely the type of use iLife is aimed at... But something as simple as putting a picture of my son on the DVD menu took the extra step of composing in Photoshop in order to have his head not cropped ridiculously. Now even that extra work is altered on the DVD.
I'm new to iDVD and might just need to work with it some more, but so far it just seems wrong and inconsistent with the rest of iLife to not have this flexibility.

Photos won't drop on Drop zones

Photos won't drop on drop zones anymore. I can see the photos in the media browser, but they won't drop where I send them. I had to re-organize my iphoto library a bit, but all the photos are seen and work fine in iphoto, just won't drop into drop zones in idvd 6. A very few photos will work. Is there some re-initializing the library I need to do or something?

see this
http://support.apple.com/kb/HT4083
Peace, Clyde

Resizing drop zone photo?

I have read through this forum and don't see any answers for this question for new versions of iDVD. I am using 7.1.2
I have dropped a photo into one of the drop zones for a template, but the photo is zoomed way in. I found if I hold the command button down I can move the photo around, how do I get it the size I would like? Do I need to edit in iphoto or Photoshop before importing to the drop zone?
Always the small things that become so frustating.
Thanks!

You can't do what you want. The drop zone is designed to give the viewer just a hint or flavor of what the DVD holds in store for them.
You might try creating a larger blank, black image and put your photo in the center and use that. It might put the photo in the right part of the drop zone with more of it visible. I've not tried it so this is just a guess.
OT

Photo dragged to drop zone not resized

iDVD is supposed to automatically resize photos dragged to drop zones to fit the screen. Not so. The photo I dragged was cropped and enlarged. How do I fix it?

I also had this problem and it was only by chance that I decided to use a still image from my film to use in one of the drop zones (from iMovie). This photo fit perfectly in the narrow portrait drop zone. I opened the photo in Photoshop to discover the size is actually 960 x 720. I created a new image with these dimensions and placed my desired image in the exact middle of the display. Voila!

IDVD quits using drop zones

My iDVD'08 automatically shuts down when ever I click on the Media button or the 'edit drop zones' button. It is very frustrating. I've resorted to dragging photos in from the photo browser. I would really like it to work the way it is supposed to. Any ideas please?

what have you tried so far? did you already Repair Permissions? did you drag the plist for iDvd to the trash and Restart the mac?
com.apple.iDvd.plist
tell us more about the mac you are working with. As in available HD space on the startup volume and the amount of ram, etc. The more we know, the sooner we'll be able to help troubleshoot.

IDVD replaces photos in drop zones

Similar Messages

Maybe you are looking for