IDVD Slideshow no audio / wrong slide show

Greeting, I have significant trouble with a iDVD project I have been working on. The main problem involves the slide shows. Don't be mistaken this is a large iDVD project, not much video input but 10 ish menus and 4 slide shows. I have experienced several problems with the slide shows. Previously one of the slide shows was duplicated in place of another slide show on a different menu. I was able to correct this by changing the order of some of the photos and re encoding the DVD. Currently Two of the slide shows have lost their audio content and several of the slides. I know that the missing audio on one of the slide shows is not caused by the format of the audio file as it is used on all but one of the menus.
I am going to try to re encode it yet again (probably the 6 or 7th time, iDVD tends to crash silently every third time) to see if it will encode correctly this time.
Any other suggestions about this?
Thanks!

However for one of the slide shows I did select the photos from iPhoto originally.
I wonder if that is affecting the performance...?
Here's an example of one of my slideshow projects that works fine. No iPhoto:
Ireland 2006
iDVD 6 Pass Through widescreen theme
696 images that are 2816x1584 pixels shot with Canon SD700 IS
15 640x480 movies from same digital camera transcoded to H.264 with QuickTime Pro.
Part 1 and Part 2 submenu buttons on main menu. All submenus are the Chapters option for this theme.
Part 1 leads to a submenu. That submenu has additional submenus and sub-submenus. Part 1 leads to 12 total submenus. These menus contain images and movies.
Part 2 leads to a submenu. That submenu has 5 submenus with only images.
I had to "remove" animation on all the sub-submenus and not include any music to get everything on a single-layer DVD-R. The Menu info was WAY over the 7:30; something like 14:00 after these adjustments. About 20 slideshows with music. Additional short slideshows with no music.
Started the rendering/encoding process at exactly 1:00:00 p.m.
Finished the Menu video rendering/encoding process at 3:53:30.
Finished the slides and transitions process at 5:37:30.
Process movies start 5:37:30, finished 6:27:45.
Burn process start 6:27:45.
Retrieving ends 6:28:30
Writing lead-in starts 6:28:30. Finished 6:31:55.
Writing... finished 6:33:50.

Similar Messages

  • Keynote to iDVD: loss of audio in slide show

    I have made a slide show on Keynote with music from iTunes. I export it to iDVD and it works fine from the computer while in iDVD. When I burn the disc, the music from the Keynote slideshow is missing although musc that I have added to menus does play. I want to use the Keynote slideshow and not transfer it to iMovie then iDVD because of loss of quality. I do not want to use the slideshow from iDVD because Keynote provides more opprtunities for effects in the slide show as well as clearer text. I think the problem has something to do with the fact that when I export, on my desktop is a copy of the slideshow AND a copy of the soundtrack.mov. How can I get them together? THANKS!!!

    Thanks for the help but I faced the same problem as others with iMovie. Also I am trying to avoid the use of iMovie because the final product, a QT from iMovie, is not as clear visually as an import from Keynote - graphics are a lot muddier. I would have to agree that, as much as I LOVE Keynote, the inability to simply export a slide show with audio intact certainly is a problem with Keynote.
    Also disappointed,
    Jim
    (Please excuse cross postings. I am just getting used to this Discussion format.)

  • Keynote to iDVD: loss of audio in slide show and other probs

    When I export my keynote straight to iDVD, the Keynotes play while in the working program. After I save an reopen the program to play, the Keynotes eventually crash iDVD. If I export them from Keynote as QT, although iI have the separate Soundtrack and .mov, when I import into iDVD the soundtrack plays while in the working iDVD program but after burning I lose the sound. I have the import audio checked. Any thoughts???
    Peace,
    Jim

    I have had exaxctly the same problem and Apple Tech support has been unable to resolve the issue for me.
    An additional problem is that although I have a perfectly timed presentation in Keynote with slide changes co-oresponding to the music whenever I try to burn it either in Ouicktime or iDVD both applications change the timing and Apple Tech Support has not provided a solution to the problem.
    One thing that I discovered after trial and error is that you need to have all images in ther same format (jpeg or tiff) in order to avoid skips or gaps in the music. Apple support seemed unaware that that problem exists.
    In many respects Keynote offers superior Flips, Page Turns,
    Fades, etc to iMovie but it doesn't seem possible to retain them as well as the background music in any burning software that I have discovered.
    donaldjs250

  • Audio in slide show exported to iDVD

    According to Apple, when a Keynote slide show is exported to iDVD, any audio in the slideshow is written to a separate file which is not referenced in iDVD and so won't be burned onto a DVD with the images. This means that the iDVD project and the audio file have to be imported to iMovie and edited before burning to DVD (what a mess!!!), but I recently was successful in exporting a slideshow to iDVD (God knows how!!! - I've not been able to do it since), and the audio was retained and played with the movie.
    Does anyone out there have any idea how this happened? Like I say, I've not been able to export a Keynote slide show to iDVD since. After a total of 5 attempts and about 36 hours, I still have not succeeded in creting an iDVD project with my latest slide show of 184 images, never mind the sound track.
    Please don't tell me I have to move to Microsoft!!!!

    Just played it on my iMac and the audio is fine. The track plays twice yet I have it set to fit to audio dissolve. The track is 3:44 and I have 78 pictures. iDVD make the slide show 7:29

  • Capture Audio and Slide show with JMF?

    Hello All;
    Can anyone guide me to start on how to stream or capture both Audio from the Mic and Slide show from Power point and generate a AVI file.
    ie., User starts presenting a Conference with Audio and Slide show, I want to implement an Application that runs in the background and Merges Audio and Slides to a AVI or MOV file.
    Please help...
    I tried using Screengrabber but please let me know what you think...

    Well,i wnt to do that too.
    I have this Algorithm(didnt implement that but...)
    I will use Two Threads
    one will be the Screen Grabber,
    and with synchronzed Methods,and the Other thread will capture my voice .
    Thus ,meaning using ONE Processor,TWO DataSources that we will merge and ONE dataSink to Save on a file.
    That Bring me to My Question:
    I cant Grab the Cursor in my Screen Grabber.
    I use the Following Code:::
    DataSource ds = Manager.createDataSource(new
    MediaLocator("screen://0,0,176,144/10"));
    MediaPlayer mp=new MediaPlayer();
    mp.setDataSource(ds);
    mp.start();
    Please Help me

  • Newbe requests help with audio for slide-show on Premiere Elements 4.

    I recently wrote you regarding a problem I was having with a slide show I was making on Premiere Elements 4 importing photo clips and music from PhotoShop Elements 9.  Thank you for your help.
    This very large slide show, some 200 clips that I have not resized is completed.  I am now having many problems with the music audio I am adding to various sequences of the slide show.  Specifically:the audio will not stay fixed on the places where I put it and end it.  Working on the Timeline Usually the length of the audio is shorter than the ending of the photo clips where it must go.  I click on the audio and stretch it and end it at the place I designate.  However, the other end has moved also so now I am left with a gap where there is no audio at the beginning of the segment.  Now in addition, the "Delete and Close Gap" does not work most of the time causing me to manually move the photo tiles which sometimes move when this happens.  I have to move each one or two individually to the left to close the gap and many times this causes loss of one or two photo tiles or they are out of order or have increase in number (of the one I am moving).
    The program has also shut down for the past 10 days causing me to lose a good deal of work and sometimes photo clips and sometimes I get many duplicates of the photo clips.  All I do is edit mostly the same two segments doing this over and over because I can't proceed to importing any more music because I can't get the first segments correct.  I have chatted with you people, Sony techs, Microsoft Techs and Canon Techs.  The Sony techs suggested the program was at fault and I used the original installation disk and repaired the program.  It has still shut down on me but not as much.
    I got error messages on the photo-cap instructions page you suggessted otherwise I would show pictures of the above problems.
    I tried to copy and/or cut and paste from the Timeline thinking I would start a new slide show in PhotoShop Elements 9 using the same photos in reverse.  The program would not let me copy or paste.  There is great difficulty in highlighting the photo tiles in Timeline because I have to shift click on each individual tile and there are too many tiles and it would take too long to get a whole segment copied.  Maybe you know another way to do this?
    I am at a stand-still now and I am quite despondent because I have been working on this slide-show for 3 months and it was a surprise for my daughter's 25th anniversary that was last Tuesday.
    I do hope you have some good suggestions that will lelt me complete this Project and get it on a disk.  I am not that technical so please be specific.
    Thanks in advance.
    Kathy

    Here's the basic advice I'd give, based on my experience. Much depends, though, on your goals and the specifics of your computer system:
    1) Resize all of your photos to no larger than 1000x750 pixels in size. This is VITAL if you want the program to maintain stability as you work. Also render often (by pressing the Enter key). When the render, the red lines above the clips on your timeline will turn green and the program will run much more efficiently.
    2) Work on your large slideshow project in shorter segments. You've got over 15 minutes worth of slides. Try working on this slideshow in 5 minute segments, output each segment and then combined the finished videos.
    3) Use only WAV audio as your music and audio for your slideshow.
    4) When you add video, audio or stills to a parallel track on your timeline, hold down the Ctrl key to override the ripple function and your current clips will remain in place.
    5) Maintain your computer by using a tool like the excellent, free, one-click Advanced System Care available at http://www.iobit.com/advancedsystemcareper.html
    As for Delete and Close Gap, how it performs depends on whether you've selected Clear or Delete, whether you've pressed the Backspace key or the Delete key and if there is video or audio on a parallel track. (This is all covered in my books, by the way, if you're interested.)
    Without knowing the specifics of your project and your situation, it's hard to give out more specific information -- but this advice should get you a long way toward completing your project!

  • After adding audio to slide show, can we...

    With the help of posts from this forum I got the audio up and running on a couple slide shows. I'd like refine a couple things, so has anybody done any of the following:
    1) Can the pictures in the slide show fade in and fade out for better picture to picture transitions?
    2) Can the play/pause button for the audio be changed? I'd like to add volume and maybe a percent indicator while the audio is loading.
    3) Could the slide show start AFTER the audio is loaded? By the time the audio starts the slide show is usually on the 2nd slide.
    4) Sometimes the audio will not loop. I think this depends on how the slide show window was closed. If the same page is reloaded again, the audio usually doesn't loop. Is there a way to re-initialize the slide show audio to guarantee it will loop each time.
    5) Will the audio work if the end-user doesn't have quicktime on the computer?
    I've been using this section of the website for beta testing -
    http://www.pebbleplace.com/Personal/SanFrancisco001.html

    It can be done, but you are asking for entirely different slideshow
    With the help of posts from this forum I got the
    audio up and running on a couple slide shows. I'd
    like refine a couple things, so has anybody done any
    of the following:
    1) Can the pictures in the slide show fade in and
    fade out for better picture to picture transitions?
    Yes, but you will have to do extra works with javascript. There is a transition variable in slideshow javascript, but there is no control over the slide duration (it's fixed and there is now way to change it). This can cause some strange effects.
    2) Can the play/pause button for the audio be
    changed? I'd like to add volume and maybe a percent
    indicator while the audio is loading.
    Yes, change one of the arguments in QT_WriteOBJECT:
    QTWriteOBJECT('SF_Soundtrack1.mov', '34', '16', '',
    3) Could the slide show start AFTER the audio is
    loaded? By the time the audio starts the slide show
    is usually on the 2nd slide.
    You can put a delay time to call QT_WriteOBJECT function, once again javascripts.
    4) Sometimes the audio will not loop. I think this
    depends on how the slide show window was closed. If
    the same page is reloaded again, the audio usually
    doesn't loop. Is there a way to re-initialize the
    slide show audio to guarantee it will loop each
    time.
    5) Will the audio work if the end-user doesn't have
    quicktime on the computer?
    QT is preloaded in a mac, but not so for pcs; so QT needs to be installed on a pc.

  • Audio in Slide Show

    The audio cuts out right at the start of my dissolve for every transition after I burn it to the DVD. I made a dmg then burned. Using an mp3 I ripped from a commercial DVD.

    Just played it on my iMac and the audio is fine. The track plays twice yet I have it set to fit to audio dissolve. The track is 3:44 and I have 78 pictures. iDVD make the slide show 7:29

  • The "Audio Visualization 2D and 3D canvas " part of the audio api slide show is only showing the background part of the 3d image

    There seams to be a problem with the Audio Data API slide show on the 10th page (Audio Visualization 2D and 3D <canvas> at http://videos.mozilla.org/serv/blizzard/audio-slideshow/#slide10). or maybe just on my computer. the problem is it only shows the background of the canvas. It still looks like its a moving image but it doesn't show the objects. So haw do i fix this?

    Works for me with the current nightly build.
    Do the other slides work?
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Help with audio from slide show

    Used Photoshop Elements 8.0 to create slide show.   After adding audio, reviewed show several times with no issue.  Then, began having issue of show playing and audio to start with, then audio cuts out and slide show continues.  Went ahead and exported to Premiere Elements 8.0 and audio played all the way through in review.  Exported to DVD.  Plays fine on DVD players, but when I attempt to play on computer, in Windows Media Player, audio( music) plays for a while then cuts out.  If I stop and close player, and then open again show picks up where left off, and appropriate music plays, but only for awhile and then cuts out.  Am making several copies of this DVD for others to play.  Some will use DVD player, some will use computer.  Dont' understand.  Need help.

    Have you tried to play the DVD on a different computer to see if it's your computer or the DVD?
    The fact it plays fine on your DVD player makes me think it might be something wrong with your computer.

  • Add audio to slide show from Itunes?

    How do I add music from itunes to my slide show.  I am using pse 10.

    It's often necessary to delete the album art from an mp3 track before adding to a slideshow.
    If using Apple files, it's possible to make an MP3 in iTunes.
    See my instructions on the attched thread.
    http://forums.adobe.com/message/4579309?tstart=0

  • IDVD 6 quits when previewing slide show

    As soon as I add music to the slide show portion, the program suddenly quits! Help... what do I do?

    Make sure you don't have any songs purchase from iTunes store with the .mp4 tag on them, they will not export to iDVD (at least they did not in v. 5,) you can always burn them to a disk and re-import them as .mp3 files. This helped me in iDVD5 and may help you as well. Good Luck

  • Encore CS4 Adjusting Audio for Slide Show

    Greetings, I have Encore CS4. I am doing a slide show presentation and have imported an audio file into the slide show as well as set the slides to play within the audio time frame. My questions is...the audio file is too loud, how can I reduce the final output volume of the audio file? The file is a wave format. Thank you Jean [email protected]

    Jean,
    About the only thing that would help, would be for Adobe to offer a link to Audition, or SoundBooth, like the "Edit in Photoshop," from the Menu Editing Panel. That might make a good "Feature Request." Obviously, it would need to link to another program, as Encore is just an authoring program, and I would not like to see a bunch of NLE/Audio "features" added to it. However, the ability to link to an appropriate program could help. I do not have CS4, but with the tighter integration with Premiere, this linking might already exist.
    I find myself in your situation all too often, if I bring in an Audio Asset, without first adjusting it. There is always that DUH! moment, when I first play the DVD RW and my speakers "walk" across the room.
    Hunt

  • Looped audio on slide shows does not loop

    Even though i set the slideshow options to "fit to audio", and it appears to work on the preview, when i burn the DVD to disc, the music track is played once only and the second half of the slideshow flips away in silence. Can anyone help? Thank you.
    iMac G5   Mac OS X (10.4.6)  

    Welcome to the forums,
    I'm a bit confused. "Fit to music" should adjust how quickly the photos change so that the song and slides finish at the same time. If you want the audio to loop, you should try "Repeat music."
    John

  • IPhoto 9.6 - slideshow to movie - text slides show only text and no image

    Made slideshow in iPhoto 9.6. Runs fine in slideshow mode on my iMac. However, when I export it to my desktop as a movie, slides that I inserted text via the text slide feature (bottom right of iPhoto) - black with the text only - lost the image. This happens on most of the text slides.  followed similar procedure before w/ no issues.

    Made slideshow in iPhoto 9.6. Runs fine in slideshow mode on my iMac. However, when I export it to my desktop as a movie, slides that I inserted text via the text slide feature (bottom right of iPhoto) - black with the text only - lost the image. This happens on most of the text slides.  followed similar procedure before w/ no issues.

Maybe you are looking for