IDVD, the Quicktime format and 16:9

Hi,
I´ve got a problem with widescreen format and Mac. I´ve edited about 10 short clips with Premiere Pro CS3 on a PC, but when it came to authoring the DVD found I no software for the PC that could handle 16:9 and 5.1 well. I´ve now moved the videos to my friends Macbook Pro and try to author a DVD with iDVD6.
I noticed that my problem was a common one; iDVD shows 16:9 material as 4:3 in preview (haven´t burned anything yet). Then I noticed that even when I play the video files on the Macbook, before even touching iDVD, they´re played in 4:3! On my PC, after being exported from Premiere Pro, they´re played as 16:9 (because they are 16:9!), but as soon as I move them to Macbook they´re played as 4:3.
Here´s the settings I used to export the files in Premiere Pro CS3:
File type : Microsoft DV
Compressor : DV - PAL
Frame Size : 720h 576 v 16:9
Frame Rate 25,00 fps
Pixel Aspect Ratio : D1/DV PAL Widescreen 16:9 (1.422)
Channels : 5.1
You see, the files are clearly 16:9 and they DO look weird when played on Macbook. I´m sure if I could figure out how to make Macbook/Quicktime player realise these are 16:9 videos, they would look correct in iDVD as well.
Any ideas?
Despite some problems, I really start to like the Mac.
P.S. If I export with the same settings, but change file type to Quicktime:
File type : Quicktime
Compressor : DV - PAL
Frame Size : 720h 576 v 16:9
Frame Rate 25,00 fps
Pixel Aspect Ratio : D1/DV PAL Widescreen 16:9 (1.422)
Channels : 5.1
I get a nice Quicktime file - in 4:3! What is the problem here, there´s plenty of settings showing that the export will be done in 16:9, but still the Quicktime format makes the final file a 4:3?
Message was edited by: abrotherus

abrotherus,
Your files are anamorphic 16:9 (16:9 content squeezed down into the 4:3 standard definition format). The files need to have the 4:3/16:9 'flag' set correctly in the file format to be recognized as 16:9 by iDVD.
One way to correct the files is to use Anamorphicizer which can be found at: http://homepage.mac.com/sith33/FileSharing34.html

Similar Messages

HT3775 Can someone direct me as to how I check whether I have the media formats and codecs that QuickTime Player can play back using my Mac Pro?

I'm trying to use quicktime on my macbook pro but I receive the message below when I make an attemp to use it. Any suggestions?
Media formats supported by QuickTime Player
QuickTime Player natively supports the following media formats and codec components. You can also extend QuickTime to support additional codecs and components.
Below are the media formats and codecs that QuickTime Player can play back in Mac OS X v10.6.x or later:

More alternatives to Quicktime. VLC is recommended a lot.
Video Player - Divx
Video Player – Flip4Mac
Video Player - VLC

Use the default format and partition step to format disk0 partition 1 in multiple disks sutiation

As we know,we need to disable the default format and partition step in ts to let mdt deploy os on C and leave the other partitions stay safe when there is only one disk on pc，and the way of installing operation system is logical drive letter store in a varible.
But what if there are 2 disks on pc，and for a record the disk 0 is always the OS disk,don't need to confirmed this.How can we modify the format and partition step to format only C on disk0 under this condition?then lead the mdt to do the rest deployment
by itself.
Thanks

You are pushing up against the design limits of MDT, and the more complex and/or arbitrary the disk configuration the harder it is for MDT to perform installations.
If you want to maintain the *existing* disk configuration, and just update the OS present, then the recommended course of action is to run MDT from *within* the OS (cscript.exe
\\server\deploymentshare$\scripts\litetouch.vbs), not from WinPE. When you do this, it's called a "refresh" scenario. MDT can capture the user files via USMT, and it knows which
partitions to use, because it's launched from within the OS itself.
Disabling the default Format and Partition step has other unintended consequences.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.

As made clear in the title:
I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.
My computer recently had a kernel panic, which apparently the corruption was in the system and needed to be erased and re-installed. I have a complete back-up using an external hard drive, and I am definitely not willing to do another one of those to reformat a partition that is already singular. I restarted the computer after ejecting my back-up, and after turning off time machine (thinking that boot camp was recognizing it as a secondary partition), however the error still occurs.
Is there any way to get around this?

diskutil list:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            749.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                            Windows7               *2.9 GB     disk1
diskutil cs list:
No CoreStorage logical volume groups found
mount:
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
/dev/disk1 on /Volumes/Windows7 (udf, local, nodev, nosuid, read-only, noowners)
From my very basic knowledge - it still looks as if there is only one partition (not including the windows 7 CD necessary to install the windows partition).

Convert spool in the text format and send mail

Hi All
Can anyone tell me
how to convert the spool into the text format and send that in email as an attachment..
Points will be rewarded
URGENT

Hi,
Read spool using FM RSPO_RETURN_ABAP_SPOOLJOB
CALL FUNCTION 'RSPO_RETURN_ABAP_SPOOLJOB'
    EXPORTING
      rqident                  = v_rqident   "Spool Number
FIRST_LINE                 = 1
LAST_LINE                  =
    TABLES
      buffer                     = i_spool "Internal table output
You will get spool in internal table and then its your game, play the way you want.
Regards,
Mandeep

I can´t send my videos fom my PC to my Ipad because the videos are in the .MP4 format and not in the .mp4, is there other types of .mp4 and then how I can send my videos to my Ipad?

Hello everybody!
I have a problem with my videos, well first of all I took videos with a camera for my school proyects and then I want to send those videos to my Ipad but there is a problem because when I tried to send my videos it said that those videos could not be synced and then I checked the video´s properties and it says that the format of those videos are .MP4 instead of the .mp4 format and i want to ask the community if there are other types of .mp4 formats and how I can send my videos?
Please reply because I really need those videos for my school proyect.
(sorry if my english is bad I dont use to speak english)

Please upload the distmgr.log and PkgXferMgr.log to Skydrive and post the link here.
Juke Chou
TechNet Community Support

I have a Sony Alpha a6000 and I took some photos in the raw format and tried to check them

I have a Sony Alpha a6000 and I took some photos in the raw format and tried to check them out in Photoshop but got a error saying that camera raw was out of date with my new camera. Even after updating my Photoshop CS 5 extended with camera raw 6.7 I beleive the exact wording was "camera not supported by the current version of Camera Raw"
Is there another version of Camera raw I can download that will allow this or is my camera just too new for the version of photoshop I have?
Thanks

Adobe’s camera support list suggests you need ACR 8.4 or newer:
https://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Your camera is several years newer than the last ACR plug-in CS5 will host.
If you’re not quite sure you want to spend the money for a new PS, then you can download and use the free DNG Converter 8.4 or newer to make DNGs from the ARW files and those DNGs will have enough new information embedded in them for an older ACR plug-in to work with. Of course this is more cumbersome than opening the files natively in PS-CC with the newest ACR plug-in.
The most obvious thing would be to subscribe to the CC Photography Plan and get the current versions of both LR and PS-CC for $10/month. There is a minimum OS requirement of 10.7 or Win 7 currently and maybe 10.8/Win7 for LR6—not sure about the next PS version because Adobe hasn’t publically said as far as I know.
One thing you haven’t seen using only PS-CS5/ACR6.x is that CS6/ACR7 or newer, there is a new toning model that seems superior for most images.

HT1657 I am a teacher and accidentally rented a movie twice. Once in HD and it told me I could not project it over my promethean board. So I rented it in the regular format and I had problems downloading it. Could I get a refund or at least a credit?

I am a teacher and accidentally rented a movie twice. Once in HD and it told me I could not project it over my promethean board. So I rented it in the regular format and I had problems downloading it. Could I get a refund or at least a credit?

You can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Is it legal to convert the music files, which I have purchased in recent months, to the mp3 format and burn them on to a CD so that they can be played on non-apple music devices that do not support the M4A format?

Is it legal to convert the music files, which I have purchased in recent months, to the mp3 format and burn them on to a CD so that they can be played on non-apple music devices that do not support the M4A format?

Hi,
This is what apple says about converting files http://support.apple.com/kb/PH12167
Jim

Is it legal to convert the music files, which I have purchased in recent months, to the mp3 format and burn them on to a CD so that they can be played in non-apple music devices that dont support the M4A format?

Is it legal to convert the music files, which I have purchased in recent months, to the mp3 format and burn them on to a CD so that they can be played in non-apple music devices that dont support the M4A format?

Yes, of course it is legal.
To convert the format, follow one of these documents:
iTunes 11 for Windows: Save a copy of a song in a new file format
iTunes 11 for Mac: Save a copy of a song in a new file format
Also note that you have the option of buying your files in MP3 format in the first place, from Amazon MP3 or other online retailers. MP3 files will work in iTunes as well as virtually every other player, program, and device.

HOW TO I CONVERT A HOMEVIDEO FOR THE "QUICKTIME FORMAT"

how do convert my homevideo for it to be able to go to my new ipod video?

If it's not already on your computer you'll need to use a DV camera with video pass-through and iMovie to capture it. Then, upgrade to Quicktime Pro 7 and use the export feature. One of the output formats is "convert for ipod."

XML Bursting program was messed up the report format and output, not sure what is causing an issue

Hi All,
I need burst the report based on the customer number for some customers and burst based on invoice number for some customers in the same bursting program. I have made the changes accordingly and sending email attachments as expected, but when the output sent for as an attachment for each invoice the report does not printing in full format, its completely ignore one child block. Not sure what was the issue. This is very very urgent please help me out.
Following is my bursting code:
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
   <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR">
      <xapi:delivery>
         <xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
        <xapi:message id="123" to="${EXCLUDED_BILL_TO_EMAIL}" attachment="true"
           subject="Confirmation for your Invoice(s)">
Dear Customer,
Thank you for placing an order with XX cust.
Please review the attached invoice(s).
Regards,
Customer Service
        </xapi:message>
         </xapi:email>
      </xapi:delivery>
      <xapi:document output="XX_INVOICE_EMAIL_${CUST_NO}" output-type="pdf" delivery="123">
         <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[EXCLUDED_BILL_TO_EMAIL!='N']"/>
      </xapi:document>
   </xapi:request>
   <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR">
      <xapi:delivery>
         <xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
        <xapi:message id="123" to="${EXCLUDED_BILL_TO_FAX}" attachment="true"
           subject="Confirmation for your Invoice(s)">
Dear Customer,
Thank you for placing an order with XX cust.
Please review the invoice(s).
Regards,
Customer Service
        </xapi:message>
         </xapi:email>
      </xapi:delivery>
      <xapi:document output="XX_INVOICE_FAX_${CUST_NO}" output-type="pdf" delivery="123">
         <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[EXCLUDED_BILL_TO_FAX!='N']"/>
      </xapi:document>
   </xapi:request>
   
   <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR/LIST_G_INVOICE_HDR/G_INVOICE_HDR">
      <xapi:delivery>
         <xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
        <xapi:message id="123" to="${BILL_TO_EMAIL}" attachment="true"
           subject="Confirmation for your Invoice ${INVOICE_NO}">
Dear Customer,
Thank you for placing an order with XX cust.
Please review the attached invoice.
Regards,
Customer Service
        </xapi:message>
         </xapi:email>
      </xapi:delivery>
      <xapi:document output="XX_INVOICE_EMAIL_${INVOICE_NO}" output-type="pdf" delivery="123">
         <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[BILL_TO_EMAIL!='N']"/>
      </xapi:document>
   </xapi:request>
   <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR/LIST_G_INVOICE_HDR/G_INVOICE_HDR">
      <xapi:delivery>
         <xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
        <xapi:message id="123" to="${BILL_TO_FAX}" attachment="true"
           subject="Confirmation for your Invoice ${INVOICE_NO}">
Dear Customer,
Thank you for placing an order with XX cust.
Please review the invoice.
Regards,
Customer Service
        </xapi:message>
         </xapi:email>
      </xapi:delivery>
      <xapi:document output="XX_INVOICE_FAX_${INVOICE_NO}" output-type="pdf" delivery="123">
         <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[BILL_TO_FAX!='N']"/>
      </xapi:document>
   </xapi:request>
   
   <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR/LIST_G_INVOICE_HDR/G_INVOICE_HDR">
      <xapi:delivery>
           <xapi:filesystem output="${OUT_DIR}/INV_${SALES_ORDER}_${ORG_ID}_${INVOICE_NO}_${REQUEST_ID}_${INVOICE_DATE}.pdf">
           </xapi:filesystem>
      </xapi:delivery>
      <xapi:document output-type="pdf">
         <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".////XXARINVOICE[P_ATTACH='Y']"/>
      </xapi:document>
   </xapi:request>
</xapi:requestset>
Thanks in Advance,
Jagadish

Initialize this:
                    String pet = "":>
error is H:\JAVA\PetAdvice.java:88: variable pet might not have been initialized
                    return pet;Geez, the error tells you the source file and the line # at which the problem occurred, in addition to a lucid description. Why couldn't you figure it out for yourself?
%

To download the print format and mail it on giving a range of customers

Hai
i have a smartform attached program to a report.
my selection screen contains only customer number (in range) and sales office code.
on executing the program will generate a printfile file for each customers.
i posted this question already and got the reply but the selection screen has only one parameter called p_mail(where u pass the address straight away).but i need the pdf format to get splitted for each and every customers and to mail them automatically.
where to write the coding for fetching the email addressess of the customers and how to loop it in order to send for all the customers automaticlly.
how to pass the parameters in the function module.
please explain to me clearly.i am in need of help.
this is the program i got for sending one mail.i get confused as how this will work for the range of customers.somebody please solve me this problem.kindly tell me where to do the changes
REPORT ztest_smartform.
DATA:it_nfal      TYPE nfal OCCURS 0 WITH HEADER LINE.
DATA:fm_name      TYPE rs38l_fnam.
DATA:ssfctrlop    TYPE ssfctrlop.
DATA:ssfcompop    TYPE ssfcompop.
DATA:it_otf_data TYPE ssfcrescl.
DATA:it_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE.
DATA:bin_filesize TYPE i.
DATA:it_pdfdata   TYPE TABLE OF tline.
DATA:it_pdf       TYPE TABLE OF solisti1.
" Mail related declarations
"Variables
DATA :
     g_sent_to_all   TYPE sonv-flag,
     g_tab_lines     TYPE i.
"Types
TYPES:
     t_document_data TYPE sodocchgi1,
     t_packing_list   TYPE sopcklsti1,
     t_attachment     TYPE solisti1,
     t_body_msg       TYPE solisti1,
     t_receivers      TYPE somlreci1,
     t_pdf            TYPE tline.
"Workareas
DATA :
     w_document_data TYPE t_document_data,
     w_packing_list   TYPE t_packing_list,
     w_attachment     TYPE t_attachment,
     w_body_msg       TYPE t_body_msg,
     w_receivers      TYPE t_receivers,
     w_pdf            TYPE t_pdf.
"Internal Tables
DATA :
     i_document_data TYPE STANDARD TABLE OF t_document_data,
     i_packing_list   TYPE STANDARD TABLE OF t_packing_list,
     i_attachment     TYPE STANDARD TABLE OF t_attachment,
     i_body_msg       TYPE STANDARD TABLE OF t_body_msg,
     i_receivers      TYPE STANDARD TABLE OF t_receivers,
     i_pdf            TYPE STANDARD TABLE OF t_pdf.
PARAMETERS p_mail type char120.
*START-OF-SELECTION.
START-OF-SELECTION.
"select data
SELECT * FROM nfal INTO TABLE it_nfal UP TO 10 ROWS.
ssfctrlop-no_dialog = 'X'.
ssfctrlop-preview   = 'X'.
ssfctrlop-getotf    = 'X'.
ssfcompop-tddest = 'LP01'.
Continued
Venkat.O
Posts: 1,036
Registered: 12/2/05
Forum Points: 1,782
Re: to down load the print format to pdf and sent the data thru the mail
Posted: Jul 15, 2009 7:31 AM    in response to: amalrose         Reply
from above
"Get Function module name for given smartform
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname = 'ZTEST_SMARTFORM'
    IMPORTING
      fm_name = fm_name.
"Call Smartform function module.
CALL FUNCTION fm_name
    EXPORTING
      control_parameters = ssfctrlop
      output_options     = ssfcompop
    IMPORTING
      job_output_info    = it_otf_data
    TABLES
      it_nfal            = it_nfal.
***********appending the otf data into the final table*********************
it_otf_final[] = it_otf_data-otfdata[].
converting OTF data into pdf data**************************
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format                = 'PDF'
    IMPORTING
      bin_filesize          = bin_filesize
    bin_file              =
    TABLES
      otf                   = it_otf_final
      lines                 = it_pdfdata[]
    EXCEPTIONS
      err_max_linewidth     = 1
      err_format            = 2
      err_conv_not_possible = 3
      err_bad_otf           = 4
      OTHERS                = 5.
To send data as email attachment, we need to have a table of SOLISTI1.
This table contains line size of 255 characters. Below function module
does the trick of changing the table from X character sized lines into
any given Y character sized lines.
REFRESH it_pdf[].
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
    EXPORTING
      line_width_dst              = '255'
    TABLES
      content_in                  = it_pdfdata[]
      content_out                 = it_pdf[]
    EXCEPTIONS
      err_line_width_src_too_long = 1
      err_line_width_dst_too_long = 2
      err_conv_failed             = 3
      OTHERS                      = 4.
IF sy-subrc 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
Continued
Venkat.O
Posts: 1,036
Registered: 12/2/05
Forum Points: 1,782
Re: to down load the print format to pdf and sent the data thru the mail
Posted: Jul 15, 2009 7:32 AM    in response to: amalrose         Reply
from above
    "Subject of the mail.
    w_document_data-obj_name = 'MAIL_TO_HEAD'.
    w_document_data-obj_descr = 'Regarding Mail Program by SAP ABAP'.
    "Body of the mail
    w_body_msg = 'This is body of mail msg.'.
    APPEND w_body_msg TO i_body_msg.
    CLEAR w_body_msg.
    "Write Packing List for Body
    DESCRIBE TABLE i_body_msg LINES g_tab_lines.
    w_packing_list-head_start = 1.
    w_packing_list-head_num   = 0.
    w_packing_list-body_start = 1.
    w_packing_list-body_num   = g_tab_lines.
    w_packing_list-doc_type   = 'RAW'.
    APPEND w_packing_list TO i_packing_list.
    CLEAR w_packing_list.
    "Write Packing List for Attachment
    w_packing_list-transf_bin = 'X'.
    w_packing_list-head_start = 1.
    w_packing_list-head_num   = 1.
    w_packing_list-body_start = 1.
    DESCRIBE TABLE it_pdf LINES w_packing_list-body_num.
    w_packing_list-doc_type   = 'PDF'.
    w_packing_list-obj_descr = 'PDF Attachment'.
    w_packing_list-obj_name   = 'PDF_ATTACHMENT'.
    w_packing_list-doc_size   = w_packing_list-body_num * 255.
    APPEND w_packing_list TO i_packing_list.
    CLEAR w_packing_list.
    "Fill the document data and get size of attachment
    w_document_data-obj_langu = sy-langu.
    READ TABLE it_pdf INTO w_pdf INDEX g_tab_lines.
    w_document_data-doc_size = ( g_tab_lines - 1 ) * 255 + STRLEN( w_attachment ).
    "Receivers List.
    w_receivers-rec_type   = 'U'."Internet address
    w_receivers-receiver   = p_mail.
    w_receivers-com_type   = 'INT'.
    w_receivers-notif_del = 'X'.
    w_receivers-notif_ndel = 'X'.
    APPEND w_receivers TO i_receivers .
    CLEAR:w_receivers.
    "Function module to send mail to Recipients
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = w_document_data
        put_in_outbox              = 'X'
        commit_work                = 'X'
      IMPORTING
        sent_to_all                = g_sent_to_all
      TABLES
        packing_list               = i_packing_list
        contents_bin               = it_pdf
        contents_txt               = i_body_msg
        receivers                  = i_receivers
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.
    IF sy-subrc = 0 .
      MESSAGE i303(me) WITH 'Mail has been Successfully Sent.'.
    ENDIF.
ENDIF.

Here:
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en
Was it deactivated on the old computer? If not, you may need to contact Adobe support by clicking on "Chat"
Serial number and activation support

Problem with the Date format and sending it to R/3

Hi all,
I have an Adaptive RFC application which fetches the data from the R/3 and displays the Employee's Personal Data.
I am using a ZFM which is customised as per the requirement from the Standard BAPI_EMPLOYEE_GETDATA.
Now the Problem i am facing is Date is default and Optional Parameter in RFC.
If i execute the RFC in R/3 without Date it is not filling the Internal Tables. And if i pass the Date it is filling the Internal Table and fetches the Records.
So in WD application i am inputing Employee FirstName, LastName or the Employee ID.
User can give any of the above input or combination of FirstName and LastName Or only the Employee ID.
Now the Main Problem is of Date which is of type Date.
I have also tried the SimpleDateFormat Class, but i am not able to achieve the result.
I have also seen the Links and threads on SDN, but unable to solve the problem.
So pls help me out asap.
Thanks & Regards,
Dhruv Shah

Hi ,
By default , RFC accept date format of SQL date (yyyy-mm-dd) . If you are using a date picker from WD, it directly set the date in SQL date format. Incase if you are trying to pass date to RFC in some other way you have to convert that into SQL date format before passing.
if you are passing String date of format dd-mm-yyyy , you try this method to convert that to SQL date and pass to your RFC.
public java.sql.Date sqlDateConvert( String date) {
    //@@begin sqlDateConvert()
     java.sql.Date dateObj=null;
     try{
          StringTokenizer tempStringTokenizer = new StringTokenizer(""+date,"-");          int dd=Integer.parseInt(tempStringTokenizer.nextToken().trim());
                                int mm=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          mm=mm-1;
          int yyyy=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          Calendar cal =Calendar.getInstance();
          cal.set(yyyy,mm,dd);
          dateObj = new java.sql.Date( cal.getTime().getTime());
     }catch(Exception e)
          return dateObj;
Hope this will help you.

What is the audio format and bitrate for the MixRa...

Regarding the MixRadio+ "high quality":
What is the audio format (AAC/MP3/WMA/etc.) ?
What is the bitrate (192/256/320kbps etc.) ?
Thanks

That is what happens when you change the size of an image.
The best format for a logo is vector. Then you can change its size, rotation, etc without any distortion or pixelation.
If you are unable to go with a vector graphic, try to use several images of varying sizes and switch between them as needed to recreate the tween, or, try a PNG and hope the pixelation isn't too bad.

IDVD, the Quicktime format and 16:9

Similar Messages

Maybe you are looking for