IDVD, time and transition problems

I made a iDVD from pictures only, no movies or music. I set the time for 5 seconds between pics and chose "dissolve" for the transition. I burned it on a DVD-R. It's only about 3 seconds between pics and no transition. Any suggestions?

Try again but with this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
You're getting 3 seconds per slide because it takes about 1 second on each end of each slide for the transitions. No way around that except to use 10 seconds and end up with 7-8 seconds per slide or use a longer transition like fade in and out which might shorten it down to around 6. You'd have to experiment.
OT

Similar Messages

Can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I bought an album on iTunes and 3 of the songs only play for 30 seconds. I have tried re-downloading the album 3 times and the problem has not been fixed. I would like some help please and thank you.

I bought an album on iTunes and 3 of the songs only play for 30 seconds. I have tried re-downloading the album 3 times and the problem has not been fixed. I would like some help please and thank you.
Artist: Imagine Dragons
Album: Night Vision

Report it here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

I try to see a movie, an error is displayed: An error ocurred loading this content. Try again later, and i can´t see the movie and I payed for it. What can i do, I tried at least 10 times, and the problem continues

I try to see a movie, an error is displayed: An error ocurred loading this content. Try again later, and i can´t see the movie and I payed for it. What can i do, I tried at least 10 times, and the problem continues

Welcome to the Apple Community.
Try pulling all the cables for a few moments and trying again.

Just download lightroom cc and not open at all. Have desistarei and will install several times and the problem continues ... I need a solution .. thank you Operating System Windows 7 64bit

just download lightroom cc and not open at all. Have desistarei and will install several times and the problem continues ... I need a solution .. thank you Operating System Windows 7 64bit

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

A few months ago I bought an imac 27 inch late 2013 ... ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ...

a few months ago I bought an imac 27 inch late 2013 .. §16GB - and flash memory) - 3,3 Ghz Intel Core 15
ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ... it is not a HDD problem, because it occurs with my 3TB WD HDD (Time Machine), my 1TB WD and 1TB IOMEGA
any one have a solution? anyone dealt with this problem in the apple care program?

You are still under warranty and/or have AppleCare. Call them. Let them deal w/it.

Nokia 6151 time and date problem

Recently I have reset my phone to Factory Setting, due to some problem that I'm having with my phone. Now, after resetting my phone to the factory setting, each time I off my phone (without removing the battery) and on it after that, I will have to update my phone date and time which before this I did not have to do that. Before i did the resetting,my phone will just on and no need fop me to do the time and date updating. If you ask me to on the auto update time,my service provider doesn't support this...how to set it back to its original state before i did the reset factory setting.

This is usually a symptom of a faulty auxilliary battery. The auxilliary is a small battery inside the phone and not the normal battery and can only be replaced by a Nokia Care Point. It should be replaced under warranty if your phone is still under warranty.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Time and date problems

Since I updated my iTouch to v 2.0, it's been having problems keeping the date and time. It usually reverts to 7 days ago and about 6 hours earlier. I had no problems when using v 1.1.4
Has anyone else had these problems?

In many cases, this occurs when you connect your iPod to the computer when iTunes has an incorrect backup date. I recently experienced this issue as well, and was able to fix it with little difficulty. Here's what I did.
1. Disconnect your iPod from the computer.
2. Make sure that the time and date on your computer is correct.
3a. In iTunes, go to Edit => Preferences => Syncing.
3b. You should see your device listed there, along with that same $#%& incorrect date and time. Select it and press "Remove Backup".
4. Close out of and reopen iTunes.
5. Reconnect your iPod. It will create a new backup to replace the one you just deleted, with the (hopefully) correct date and time, and your iPod's date and time will change to mirror that of your computer's.
I hope that helps!

Nokia E71 time and date problems.

I cant ever set the time and date of my nokia E71. Anytime i access the time and date settings, it just doesn't go through. Please help me out.

Hi Faces1,
Welcome to Nokia discussions board!
In order to fix this issue, I advise you to perform a soft reset on your phone: type *#7780#. Default lock code is 12345. If the issue persists, perform a hard reset. First of all, back up your data using Nokia Suite (Tools > Back up). Once your data is fully backed up, type *#7370# on the keypad.
Alternatively, you may also check for updates on Nokia Suite (by going to Tools > Updates).
Then try to set the time and date again.
Let us know how you get on and feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

IPhoto time and date problem

I cannot change the time and date on pictures just imported. So far I am back to 1795. Is anyone else having this problem?

Try boot into Safe Mode and try again.

Blurry Ken Burns effect and transitions problem in IPhoto6

I've never seen an answer for these problems, so i'm hoping someone can help. Whenever I use the Ken Burns effect (both the auto and when i do it manually) the photos are very blurry. I have tried large hig resolution photo's as well as lower es. Same result. I thought it might be proessing power or a graphics card issue, but even if i export it to Quicktime or IDVD it's the same blurriness. Is there a setting I need to change? Is my current set up just not capable of utilizing this?
Second problem is transitions. If I do different transitions between slide they frequently will be wrong. Mostly they default to dissolve. If I begin with say Mosiaic, it will work fine until i switch to dissolve, and then it will stay on dissolve, no matter what I change it to. Any help?
Sorry for two seemingly different issues, but I'm trying to do both at once.

Excellent. The generator suggestions worked like a charm. Just curious. What did you mean by adjustment layer. Surely it's something simple, but forgive me for not knowing.
Trey

Powerbook g4 1.67ghz motherboard replacement 4 time and still problems

My powerbook g4 1.67 has had a series of duff motherboards since the first replacement due to the problems with it's memory slot (a well known fault) and since then has had 3 additional motherboards fitted and the present one has heat issues that result in the fans never terminating once active.
I spoke to apple customer services and they told me they will repair it once more and if it's not fixed they are unsure what will happen after that, I phoned back as politely asked for a replacement laptop but they refused on the grounds that it's more than 12 months old.
They gave me the uk Apple Operations postal address, and told me to take it up with them, they also said that I won't get that far in a roundabout way.
Is there anything I can do to get a replacement or am I completely screwed on this? Any suggestions would be very helpful.
regards
Stefan

Hi, Steven, and welcome to Apple Discussions. I suspect that if Apple has agreed to replace your logic board once more at no charge, you won't progress to any next step that involves anything different until you've allowed that step to go forward and it has failed to solve the problem. After five logic boards and no resolution, I can't imagine how anyone could fail to agree that a replacement was justified. Just be sure to keep all your contacts civil and within the bounds of propriety, whatever happens, and keep all your documentation of what's been done and when.
I don't know hether it would be possible, now or at any later time, for Apple to replace your PB with another of the same model. A replacement for it might have to be a MacBook or MacBook Pro, which would bring with it some issues of its own. If things get to that point, be sure to inform yourself about those issues to avoid nasty surprises.

IPod nano 5 date & time and screen problems.

My iPod nano 5th gen. The screen has white lines going from side to side. And more and more keep appearing. Also when I go to change the date and time setting it keeps shutting off and restarting. I've tried to do a hard reset and it didnt work. Someone please help !!!!!!!!!

I have sorted out the playing problems.
However it's still not showing battery is charging either through usb or mains charger - although I can play music - but cannot switch nano off. Any advice appreciated

Center page and transition problems

1. Whenever I run my project it always is to the top left of the page in firefox and IE. I want it top centered.
When I look at tutorials online their project is automatically top centered. How do I get that?
2. When doing transitions I want some images to side to the right of the page so it is not visable anymore. When I run it, it is off the page but it is now sitting within the background. To make it disappear complety I've have to fade it out just as it reaches the edge of the artboard but I don't think you should have the do this to get the trasition effect needed. Once the image is off the art board isn't it supposed to disapear?
Any help to fix both of these problems to greatly help.

I figured it out. I unchecked have artboard be resizable and it fixed everthing.

My phone app freezes and message app crashes. I tried restarting multiple times and the problem persists. Everytime i go to the phone app and press on a contact to call it just freezes up and does nothing. Does anyone know how to fix this problem?

My phone app freezes and when i press on contact either it freezes or does nothing. Anyone know how to fix this problem? Also messaging app crashes. ANOTHER NEW PROBLEM: I can't receive calls either.

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

IDVD, time and transition problems

Similar Messages

Maybe you are looking for