IDVD tutorial headaches.

I am trying to learn how to make a dvd, so I opened iDVD and selected "Tutorial".
1) I hear the audio, but the audio sounds like an echo, it starts then the voice over overlaps.
2) I get all the symbol of a video playing, but no pictures
I am running snow leopards 10.6.8 and iLife 11, by the way earlier i blindly created a dvd,by adding some AVI files into it and burned it.
It worked visually, but the selection of files is very confusing,thats why i went to the tutorial.
Also I wanted to find out what version iDVD i have, but when i look into it "About iDVD" was not highlighted.
Any help or enlightenment on the above?

There are no viruses known that have ever succesfully attacked Apple OS X. Other types of malware, like Trojans, are another matter - if you allow them to be installed.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-1848
First update the MacScan malware definitions before scanning. You can also contact their support team for any additional support - [email protected]
Security of OS X generally:
http://www.apple.com/macosx/security/
http://www.nsa.gov/ia/_files/os/applemac/I731-007R-2007.pdf
Security Configuration for Version 10.5 Leopard:
http://images.apple.com/server/macosx/docs/Leopard_Security_Config_2nd_Ed.pdf
This Blog entry is also worth a read:
http://blog.damballa.com/?p=1055
UPDATES:
Another source of malware, apart from sites like Facebook and Hotmail, is the Android Marketplace:
More than 50 applications available via the official Android Marketplace have been found to contain a virus.
Analysis suggests that the booby-trapped apps may have been downloaded up to 200,000 times. The apps are also known to be available on unofficial Android stores too. Once a booby-trapped application is installed and run, the virus lurking within, known as DroidDream, sends sensitive data, such as a phone's unique ID number, to a remote server. It also checks to see if a phone has already been infected and, if not, uses known exploits to bypass security controls and give its creator access to the handset. This bestows the ability to install any code on a phone or steal any information from it.
Remote removal of the booby-trapped apps may not solve all the security problems they pose. The remote kill switch will not remove any other code that may have been dropped onto the device as a result of the initial infection.
Moreover, more than 99% of Android phones are potentially leaking data that, if stolen, could be used to get the information they store online.
http://www.bbc.co.uk/news/technology-13422308
The data being leaked is typically used to get at web-based services such as Google Calendar.
The open nature of the Android platform was a boon and a danger, and as Facebook have already discovered it is also a very attractive criminal playground.
http://www.bbc.co.uk/news/technology-12633923
How safe is your smartphone?
Smartphones and social networking sites are likely to become the next big target for cyber criminals, according to a security industry report.
Symantec's annual threat analysis warns that the technologies are increasingly being used to spread malicious code.
Users of Facebook, Twitter and Google's mobile operating system, Android, are said to be particularly vulnerable.
In several cases, the security holes were exploited and used to install harmful software on Android handsets - suggesting that criminals now view smartphone hacking as a potentially lucrative area.
At least six different varieties of malware were discovered hidden in applications that were distributed through a Chinese download service.
Several pieces of malware were also found on iPhones, however only devices that had been "jailbroken" to bypass Apple's security were affected.
The company's process of pre-vetting all new applications is believed to have spared its devices from a major attack.
The company estimates that one in six links posted on Facebook pages are connected to malicious software.
http://www.bbc.co.uk/news/technology-12967254
to which Facebook has responded:
"Facebook and Internet security company Web of Trust (WOT) will provide Facebook users with a feature that protects them against dubious Web links, the companies said this week.
When a Facebook user clicks on a link that leads to a page with a poor reputation rating given by the WOT community, the user will receive a warning message. Typically, the sites with a poor reputation are known for phishing, untrustworthy content, fraudulent services or other scams."
http://www.macworld.co.uk/news/index.cfm?olo=email&NewsID=3279603
Newly discovered malicious software dubbed "MACDefender" takes aim at users of the Mac OS X operating system by automatically downloading a file through JavaScript. But users must also agree to install the software, leaving the potential threat limited.
The new MACDefender malware was first noted on April 30, 2011 by users of the Apple Support Communities, and was highlighted by antivirus company Intego. If the right settings are enabled in Apple's Safari browser, MACDefender can be downloaded to a system after a user clicks a link while searching the Internet.
"When a user clicks a link after performing a search on a search engine such as Google, this takes them to a web site whose page contains JavaScript that automatically downloads a file," Intego said. "In this case, the file downloaded is a compressed ZIP archive, which, if a specific option in a web browser is checked (Open 'safe' files after downloading in Safari, for example), will open."
However, users must still agree to install the malware after it downloads. After the ZIP file is extracted, users are presented with the "MACDefender Setup Installer," at which point they must agree to continue and provide an administrator password.
Because of the fact that users must agree to install the software and provide a password, Intego categorized the threat with MACDefender as "low."
Users on Apple's support forums advise killing active processes from the application using the Mac OS X Activity Monitor. MACDefender can then be deleted from the Applications folder by dragging it into the trash.
The malware is not to be confused with MacDefender, the maker of geocaching software including GCStatistic and DTmatrix. The company noted on its site it is not affiliated with the malware.
Malware spreads through search engines like Google via a method known as "SEO poisoning." The sites are designed to game search engine algorithms and show up when users search for certain topics.
The latest threat to  the Mac OS is the Weyland-Yutani BOT, which is described as a DIY crimewave kit that supports web injects and form grabbing in Firefox; however both Chrome and Safari will soon follow.  'Form grabbing' is a way of collecting passwords:
http://www.csis.dk/en/csis/blog/3195/
Additional reading:
"Antivirus Software On Your Mac: Yes or No?"
http://gigaom.com/apple/antivirus-software-on-your-mac-yes-or-no/

Similar Messages

  • IDVD tutorial

    I can duplicate everything shown in the "Snow Day" movie but the "Extras" slide show. I can get the pictures in ok but cannot figure out how to make a theme out of the "icicle" picture.
    David
    P.S. Hope I didn't duplicate this question. I don't think it went through the first time.

    Not sure what you're asking. You do have this Manual for the tutorial?
    http://manuals.info.apple.com/en/iDVDTutorial.pdf
    Exactly where are things not working?
    From the tutorial manual:
    Add a Submenu
    If you want to add more movies or slideshows to your DVD, you can add another submenu. You
    can also use your own image or movie clip as the background of a DVD menu. Here, you’ll create
    a new submenu and add a custom background to it.
    To add and customize a submenu:
    1 Click Folder to place a new button on the main menu. Select the text on the new button (labeled
    “My Folder”) and type “Extras.”
    2 Double-click the button to open the new submenu.
    3 Drag the file named “snowday24.jpg” from the Pictures folder in the iDVD Tutorial folder, and hold it over the menu in an area outside the drop zone. Press the Command key and drop the file in place. The new background is set, and the drop zone that was on the menu disappears.
    4 Drag the audio file named “Cat Briar Road 0’32.m4a” from the Audio folder in the iDVD Tutorial folder to the Audio well in the Settings pane.
    5 Double-click the title of the menu to select it, and then type “Extras” to change the title. Click outside the text. Drag the title to center it.
    G5dual2GHz, 550TiBook, 9600>G3Upgraded   Mac OS X (10.4.2)   1TB+ Storage
    G5dual2GHz, 550TiBook, 9600>G3Upgraded   Mac OS X (10.4.2)   1TB+ Storage

  • Idvd tutorial refund?

    I downloaded idvd and it was the tutorial. I then found out the new macs cant get idvd. Is there a way to get my money back for the tutorial?

    Hi Jocelyn ...
    Apple's policy states that, "alll sales are final" >>  iTUNES STORE - TERMS AND CONDITIONS
    But considering you weren't aware of Lion (new Macs) not supporting iDVD, you can at least ask for a refund.
    Use the email form here > Apple - Support - Mac App Store - Contact Support

  • IMovie / iDvd BIG Headache - Help please

    iMovie v4
    iDvd v5
    2.5Gb Ram
    Hi all,
    I have just spent nearly two days creating a film in imovie only to find that it wont burn in idvd.
    It contains a large amount of audio clips and suffers from the stuttering problems mentioned in other threads which seems to be a serious bug in the software.
    I passed the project to idvd from imovie and built the menus etc, it previews fine in idvd. When burning, it all goes well until it gets to ''encoding audio asset'' when it just hangs permanently.
    Has anyone got any ideas? i've had just about enough of video editing (serious video camera import problems as well) and have now run out of patience.
    Thanks in advance,
    Dave

    Dave,
    Happy New Year to you and Sue!
    See how easy answers to problems can be obtained when detailed info is provided.
    I briefly looked at the suggestions/advice by Sue & Karl posted and I agree with them.
    I convert mpeg2 files with MpegStremclip and have on occasion burned my audio to CD and reimported to my audio track.
    OK, so far so good. Now let's look forward to your next project (or maybe this one if you still have problems).
    I make it a practice to edit in small chunks (by scene/segement/clip, or whatever, but always ensuring the video on the timeline never exceeds 9:28 mins which equals about 2gbs.
    After I've added all my transitions, effects, titles, etc. I export the finished scene/segement/clip and start a new project with the next scene/segement/clip, or whatever.
    After I've completed and exported the last scene, I start a new project and bring them all together (joining them with transitions if neccesary), save & close iMovie. Open iDVD, import the .Mov project file into iDVD and Voila!
    Editing in small chucks (by predetermined scenes) is less complicated and lessens the possibilty of, out of sync audio, stuttering, etc. It also lessens the many transitions, visual/audio effects and titles that iDVD would ordinarily have to deal with during the encoding process, making it easier for iDVD to do it's thing.
    The suggestions above are just the way I do it others may have different ways of editing that produce the same results, but I stick with what I've found works best for me. I haven't had any problems (that couldn't be corrected/resolved)since iMovie 3.xx
    NOTE.
    The easiest way to import all the previously exported scenes/segments/clips in the new iMovie project is to:
    Locate the new project's media folder & drag all the scenes into it. The next time you open iMovie the option to place the clips in the clips pane will appear, select yes, and drag the clips to the timeline. Conduct any last minute editing if needed, save and close. you're ready for iDVD.
    Just for your info, clips bigger than 2gbs can only be brought into iMovie by the above procedure (being placed in the media folder), however, no further editing can be performed on these clips.
    Clips smaller than 2gbs can be brought into iMovie several different ways and are still editable.

  • Idvd tutorial help

    hello all, i'm looking for any type of help in learning to create a slideshow with music and burn it to a dvd. this will be an array of photos from a 80th birthday party. so i guess i'm kinda anxious to learn this before he has another birthday!
    thanks, bill

    Bill,
    Because of Old Toad's comment, I checked out the iPhoto group. As he knows, I don't use iPhoto. I do so much "stuff" in Photoshop Elements, that I find iPhoto limiting. So if you are willing to bypass some of the iPhoto issues (and feature like Ken Burns Effect, which makes me dizzy), you might consider building your slideshow totally within iDVD. Here's two of my more complex projects:
    Ireland 2004 iDVD Project
    Nearly 800 images dragged into iDVD as organized folders from the hard drive. Transitions on each image, and menus, sub-menus, and sub-sub menus. The sub-menus are created by clicking on the Folder icon on the iDVD interface.
    Main Menu has 6 buttons: Downpatrick, Antrim Coast, Letterkenny, Sligo, Trim, and Extras. Behind each button are additional buttons ranging from 3 to 6 buttons. The Extras button goes fairly deep. When you click on Extras, it gives you 3 choices on a new menu. The "B&Bs" button opens a new menu with 5 buttons. The "Movies" button opens a new menu with 4 buttons. If you click on the "Irish Music" button, you open a new menu with 2 buttons. At that point, you are at a "sub-sub-sub menu."
    Music was on 95% of the slideshows. Some movies converted to QT DV from Canon S400 digicam .AVI files (iDVD 4). Now convert to H.264 with QuickTime 7. Images are original 4MP (2MB) JPEG images from the same digicam. This DVD project is around 4GB with all pictures as DVD-ROM content.
    Best Quality setting.
    Started at 8:13 p.m. Stage 4 at 10:29 p.m. Done at 10:54 p.m. Additional copies at 11:16 and 11:38. Then copied from 4X to 8X drive: 11:55-12:10.
    Then I made an autoplay version with one of the QuickTime-based movies playing before the main menu:
    Started 9:08 p.m. Went right to Stage 2. Stage 3 started 11:34 p.m. Stage 4 started 11:42 p.m. Finished with burned DVD at 11:53 p.m. Started second copy at 11:54 p.m. Finished burning a second copy at 12:08 a.m. This was with Pioneer 107D 8X burner.
    I made some minor changes to the autoplay version and re-burned it.
    Started at 7:35 pm. Went right to Stage 2 (rendering and encoding). Went to Stage 3 at 10:03. Went to Stage 4 at 10:14. Finished with burned DVD at 10:27. Burned a second disk from 10:40 until 10:53. Burned a third disk from 10:54 until 11:08. Used Ritek 8X DVD-R.
    Power Mac G4 DP 1.25 GHz
    Mediterranean cruise
    I had over 1000 images from a Mediterranean cruise. I broke them down in to 24 Albums in iPhoto (fewer than 99 images each). In iDVD, I created 6 Folders which created sub-menus. Main Menu buttons (folders/slideshows) such as Barcelona, French Riviera, Florence, Rome, Naples, Malta. Then I added each of the corresponding 24 iPhoto Albums to those 6 slideshows, thereby creating 24 total slideshows on sub-menus. Takes some planning. All slideshows had transitions and music.
    Set to Best Quality
    Started 5:45 p.m.
    Finished at 8:30 p.m. 2 hours and 15 minutes to render 1000 picture transitions. Balance of time in Multiplexing and burning.
    Power Mac G4 DP 1.25 GHz and 4X DVD burner.

  • Low resolution idvd's

    When I burn a dvd from Aperture the pictures are sharp and clear on my hi-def MacBook Pro 17"screen. When I burn a dvd through idvd it is not a picture I'd show anyone. I told at least 3, one to one instructors, I planned to duplicate dvds to sell. None of them thought to mention that the idvd res would be embarrassingly low. For other problems they had me clear the HD and reinstall everything
    I have read on some threads that all dvds are bad. Not so from Aperture.
    Is there no way to get good Aperture quality (RAW exported as full JPEG) via idvd? Has Apple no pride in their product?
    I am fully up to date on all software on the machine.
    Also the screen size when I playback from dvd is very small. Is this a clue to operator error.
    Please be gentle, I am an old retired guy and this all hard to understand.
    Thank you.

    Wow what q barrage of information. I read it all. Not sure I understood.
    I have NOT made a slideshow from aperture to a dvd.
    I have made dvds of groups of pictures via file>export>versions, select the dvdas destination and click burn. To the uninitiated,as I, it seemed, if a dvd can contain information that will replicate the original then idvd should be able to do the same. I finally think I get that point.
    Yes I viewsed the dvd on my old tv, it looked bad. Much worse than a purchased video dvd.
    I didn't expect my dvd to look soooo terriable via dvd player on my computer. I mean so terriable I can't believe anyone whould ever use this medium for stills or video and that apple really sells anything making such terriable pictures. Shouldn't the pictures look as good as a movie played on the dvd player?
    I still think I or the computer are making a mistake somewhere. My pictures don't look as good as the idvd tutorial. Don't you think they should?
    You asked how to get Aperture pictures to idvd: choose media and the projects from aperture come up. From there I select the album that I created (in aperture) to be part of my dvd. As others have stated that once this is done and you check the created dvd the pictures look good. Once burned the pictures are too embarrassing to show. I'm shooting RAW with 10.1 MP and love what I see in aperture.
    Options I understand to be:
    -A $1000 Adobe program.
    -A $129 program fotomagicio.
    -Hire someone with a good program to do final assembly and burn of a master. (Now I am assuming that the master can be reproduced to multiple dvds with high quality.)
    -Try out this automator thingy that says it is not guaranteed and seems pushing new limits on my computer skills.
    -Trade the camera and computer for power tools and take up a new retirement plan.
    Other than that I need more education as to how all this information gets recorded and duplicated.
    So much for the all gain, no pain, easy with professional looks that apple promotes.
    Call me discouraged, and I do thank you. This is the best support I have received on any of my apple hard or software.
    Ken

  • Pixelated pictures when dvd is played after burning in IDVD

    I have created a slideshow in iDVD - all went well. I have burned to a dvd however, when the dvd is played on our dvd player/tv the pictures are terribly pixelated. (they look fine on the preview during the project) - rather frustrating when the thing takes HOURS to burn as there are 1000+ images. Any advice to be offered as to why this is happening and how to prevent it? Many thanks.

    Hi Lyn Olds
    Welcome to apple discussions. If you haven't already, take a look at apple's tutorial for iDvd. They really do help.
    iDVD Tutorial:
    http://www.apple.com/ilife/tutorials/#idvd
    iDVD 8 Manual, as pdf, so download it. It is very helpful:
    http://support.apple.com/manuals/#idvd
    Keep in mind the protocol for burning a dvd is rather specific and reduces the resolution of most images to 640 x 480. That's less than a third of a megapixel for still images. Most burned Dvd's are lagging well behind the capabilities of current hi-resolution cameras and camcorders.
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6675.html
    You may also want to take a look at these 3 apps that specialize in quality slideshows. They come highly recommended on this forum (especially the first one).
    http://www.boinx.com/fotomagico/overview/
    http://boinx.com/photopresenter/overview/
    http://www.lqgraphics.com/software/phototomovie.php
    If the above apps don't meet your needs then search this forum for other solutions like using Ken Burns effect to minimize pixelation via a QT movie.
    I believe OT does a great job of explaining this per the following link:
    http://discussions.apple.com/thread.jspa?messageID=8164545&#8164545
    Btw, the only way I am aware of to burn High Resolution DVD’s is with Roxio’s Toast and a Blue Ray burner.
    Another solution is to simply hook your TV to the Mac for playback. That or consider using AppleTV which essentially circumvents the need to burn a dvd altogether.
    Message was edited by: SDMacuser

  • First time using iDVD

    I have iLife 05 and I am finally getting around to doing all the cool stuff I am capable of with my MAC.
    I have a few questions hopefully some people out there could answer.
    1. When I want to create a DVD, can I use photos from iPhoto and/or home videos?
    2. This one is for iMovie. Same question I guess, can I use individual photos from iPhoto or do I have to create a slideshow first?
    Thanks and any help anyone provides is greatly appreciated.
    I can't wait to get playing around!
    Chris

    Hi Chris:
    1. Yes- you can use photos from iPhoto or from anywhere on your mac. And, you can import DV Tape video directly into imovie with a 4-pin to 6-pin firewire cable.
    2. The same goes for imovie. And, you can build a slideshow right in imovie with individual photos or in iPhot and import from there. BTW-you can do the same in iDVD.
    Now, may I suggest watching the iMovie Tutorals and downloading the PDF files?
    See the iMovie tutorials (in html and QT movie form) at:
    http://www.apple.com/support/imovie/
    (Scroll down a bit)
    http://www.fsdb.k12.fl.us/rmc/tutorials/ilife.html
    See the iMovie tutorials (in pdf form) at:
    http://manuals.info.apple.com/en/iMovieAtAGlance.pdf
    http://manuals.info.apple.com/en/iMovieHDGettingStarted.pdf
    http://manuals.info.apple.com/en/iMovieLesson1.pdf
    http://manuals.info.apple.com/en/iMovieLesson2.pdf
    http://manuals.info.apple.com/en/iMovieLesson3.pdf
    http://manuals.info.apple.com/en/iMovieLesson4.pdf
    http://manuals.info.apple.com/en/iMovieLesson5.pdf
    http://manuals.info.apple.com/en/iMovieLesson6.pdf
    http://manuals.info.apple.com/en/iMovieLesson7.pdf
    See the iDVD tutorial at:
    http://manuals.info.apple.com/en/iDVDAtAGlance.pdf
    http://manuals.info.apple.com/en/iDVD5GettingStarted.pdf
    http://manuals.info.apple.com/en/iDVDTutorial.pdf
    Not all of these are iLife 05...but you will get the idea.
    Sue

  • Missing files on iDVD start up

    Whenever I start up iDVD I get a missing files notice that reads:
    Macintosh HD/Library/Application Support/iDVD/Tutorial/Pictures Picture
    and
    Macintosh HD/Library/Application Support/iDVD/Tutorial/Pictures video
    I remember going through the tutorial once, and may have deleted the files, but can't understand why I would need them. Do I?
    Thanks
    Grant

    These are files you use in the project which have been moved or deleted from their previous location.
    If you pull down the project menu and select the first option project info you will see a pane with all the referenced file. You have the option on highlighting to delete or navigate to set a new location.

  • AVI and using iDVD

    I am trying to take a collection of avi files and put them into iDVD. This is my first iDVD project and wasn't sure if I needed to change their formats somehow before hand. Also if anyone has any iDVD tutorial recommendations or books please fell free to pass the knowledge on.

    Key question: Where did the AVIs come from? The ones from my Canon SD700 IS work fine.
    iDVD 6 Getting Started PDF download
    Apple's iMovie Learning Site
    Apple's iDVD Learning Site
    iLife ’06 Multimedia Tutorials
    General Learning Center
    Ken Stone: Authoring in iDVD 6
    My favorite, by far:
    iMovie HD & iDVD 6: The Missing Manual
    You can download Chapter four: Camcorder Meets Mac.
    iPhoto 6: The Missing Manual

  • IDVD 3.0.1 Burn Quits Program

    Hi,
    I'm new here, people...and definitely new to iDVD. Hoping for some guidance. This seems like a good place to look for it.
    Just made a nice 2 minute iMovie (3.0.3), using lots of stills, transitions, and video. 646 MB. Soundtrack's key and very nice. Used the Help instructions ("Exporting your movie for viewing in another format") but only came out with a great quality QuickTime movie that wouldn't play on my DVD player (?).
    I need to get this to my friend with a PC (he just won't listen to me) and a DVD player. So I tried going through iDVD 3.0.1.
    Pressed the "Create iDVD Project" button in iMovie and got the iDVD screen up. Put a brand new Memorex DVD-R in and pressed "Burn". It started at "28 minutes remaining". Everything seemed fine until it reached "19 minutes remaining". Then the program quit.
    This happened twice...both times with the same outcome: no finished DVD product.
    Can somebody give me some advice on this? Also: if I DO use iDVD, do I have to use those themes or can I just send this piece as a straight movie?
    Thanks
    iMac G4   Mac OS X (10.4.3)  
    iMac G4   Mac OS X (10.4.3)  

    Welcome to the discussions.
    The right place? Well, almost. There is an iDVD discussion, too. This is the iMovie discussion.
    Anyway, you must use a theme in iDVD, but the themes can be customized. I often use the "Sky" theme and replace the moving sky with a still from the movie.
    Try the iDVD tutorial, it's really good.
    If you don't use iDVD (or another DVD authoring software) you wind up with a DVD-ROM with a QT movie and those can't be played on a TV.
    For your burning problems:
    You need lot's of free space on your hard drive, up to 10GB.
    Don't run anything else at the same time.
    Set both Screen Saver AND Energy Saver to "Never".
    If this doesn't help, try the iDVD discussion.

  • IDVD not burning SOME transition frames

    I have an imovie 06 movie where I set chapters and transitions. When I burn the DVD (I have tried 3 times) the first 4 chapters and transitions work OK, but on the final 6, the 4 second transition frame with the title I set in iMovie mysteriously drops out. Any idea what could be causing this. Maybe an incompatibility between iMovie 06 & iDVD 08?
    I've been trying to burn this movie for a week! I already reverted back to imovie O6 when I realized how awful imovie 08 was (NO CHAPTERS!) Now this is just the latest iDVD 08 headache. From what I've read it seems a little more difficult to revert to iDVD 06. Is that true?
    Message was edited by: John Hall3

    Actually, I just looked at the disk closer, and the transition frames actually ARE there, but the chapter markers are not burning in the right place, so when you hit the chapter, the title frame is already over. When you place the movie in iDVD before you burn it, everything is aligned properly.

  • MPEG- MOV- iDVD- DVD-R- lost audio

    [I've cross-posted this question to the iDVD 4 Discussion in the hope that, between the two, I'll find an answer.]
    I'm new to this, so please bear with me if this is a stupid question:
    Using the "Export" function on QuickTime 7 Pro, I converted a MPEG file to a MOV file so that I could use iDVD to burn it onto a DVD-R. I created the "Project" following the iDVD tutorial and successfully burned it to a DVD-R using my PowerBook's SuperDrive except that I lost the audio; I'm left with a silent movie. How do I get a "talkie"? (I suspect there's a very simple answer to this, but I'm such a novice . . . .) Thanks.
    PowerBook G4   Mac OS X (10.3.9)   SuperDrive; QuickTime 7.0.4 Pro; iDVD 4.0.1

    MPEG Streamclip (free) can convert your .mpg file (with the audio) to DV Stream for use in video editing software like iMovie or to other QT formats.

  • Tutorial will not open

    After having it on my Mac for so long, I decided to have a go with iDVD (v.4.0.1). I chose to go through the tutorial when I launched it. But, I was greeted with this error:
    Error occurred while loading project. This project seems to be write-protected so we cannot open it.
    I was working at the time in my standard user account on my Mac. Going into my Admin account and trying the iDVD tutorial works perfectly. So, does the iDVD tutorial only work in Admin accounts and not any of the other user accounts on my Mac?
    Oh, and I love the "we" in the error.

    Your standard user account must not has read and write access to those files. The file is located in the HD/Library/Application Support/iDVD folder. Select the Tutorial.dvdproj file and bring up the info window. The permissions should be
    You can Read & Write
    Owner: system Read & Write
    Group: Admin Read and Write
    Now check your standard user and make sure they are in the Admin group. If not put them in there.
    I'm assuming you could copy the Tutorial folder into your standard User folder and set the owner of that copy to the standard user.
    OT

  • After using iDVD, can my iMac burn a DVD ?

    After using iDVD, can my iMac burn a DVD ?
    I mean how do I know whether my disk drive can write/burn DVD ?
    Mine is a 24" iMac bought some 5 months ago.
    Thanks

    Assuming your mac has at least 25 GB's of available hard drive space on the boot volume and an S-Drive as opposed to a combo drive; the latter only reads dvd's while the former both reads and writes to dvd, then you should be able to, yes.
    But follow the iMovie> iDvd Tutorial/s first.
    http://www.apple.com/ilife/tutorials/?cmp#idvd
    Hope this helps but if not just come on back. Good luck.
    Message was edited by: SDMacuser

Maybe you are looking for