IDVD will not burn a DVD - just disk image - why not?

I did a short iMovie project (just about 6 or 7 minutes of video); used a theme, added background music from my iTunes collection-- OK all fine; exported via "Share" to iDVD (all this is iLife'09 and Leopard 10.5.6 on a MacBook May 2006).
I did a DISK IMAGE but then also wanted to test to burn a real DVD. That got to to final step then hung- said one minute to go, then ejected the DVD - but nothing was on the DVD.
Later I used DISK UTILITY to burn the disk image to a DVD- and that DVD played fine on my Mac and even on my 7 year old DVD player.
OK so my MB DVD burner is working; the iDVD makes a valid Disk Image-- but why can't I go directly from iDVD to a DVD?
Thanks for any comments here -- I believe there has been a bit of discussion on this, but not sure if others are able to make a DISK IMAGE and then (if then) burn a DVD as I have. But I'm still not able to do this directly from iDVD.
Regards,
Steve Schulte
Monday 9 March 2009 at 10:50

Hi Beverly, I am using the imovie 09 version with iDVD 09. I didn't do any more editing after sharing the project to iDVD from within imovie. I get no error messages at all, that's the strange thing. It acts like it is encoding fine. But, when you watch the finished product, either a disc image or a burned dvd, it is garbled up from about halfway thru to the end. I even tried to have idvd save the project as a disc image and then used Toast 9 to burn it, and it is the same way, messed up. Just to be sure it wasn't the imovie 09 doing it, I took the same imovie 09 project, put it in Toast 9, and let Toast save it as a disc image, and it was fine. And I burned it with toast and the dvd played fine. I then tried to share the same project again, from imovie 09, to idvd 09, and save to disc image, and or burn it to dvd and again, it messes it up badly. This is a brand new imac bought from the apple store locally. I really can't understand why idvd 09 is this bad? It doesn't make any sense. I've eliminated imovie 09 as the problem. Like I said before, I have a lot of experience using the previous versions of imovie 6, and idvd 6 on a powerbook G4, without any problems? Oh, and I did get the menu sound to work, but not the method listed here. I tried all of those listed, without success. I found that if you keep dragging out the menu sound, and replace it with a new mp3, and drag it out, it finally works. I did this about 6 times. Then, all of a sudden it worked. Makes no sense at all. I never did see the little wave sound thing he talked about. It works now, but the wave isn't there? If there is a way to just remove idvd 09, and replace it with idvd 6.04, I'll do that. Is this possible?

Similar Messages

Idvd 08 shuts down after building, idvd will not burn a dvd

Dvd studio pro burns fine, Burning a DVD data disk works fine. Burning a project in Idvd 08 will not burn anything. It simply quits before finishing and spits out an empty dvd disk. I have a imac g5 power pc 2.1 ghz, 500gb hd, 2.5 gb ram and I am running idvd 08 version 7.0. I have tried reinstalling idvd and have even repaired permissions. What do I do? What could it be?

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• *Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb*
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
Yours Bengt W

By using "Disk Utility", will I burn a DVD to watch on TV or burn a DVD for storage?

Old Toad tells me to burn a DVD from"Disk Utility", but will that burn my DVD so I can watch it on TV, or will it store those files on a DVD?
If best, I would like to actually watch the DVD...

Disk Utility will create a data DVD for storage.
Ony iDVD will burn a video for playback with a DVD player or your Mac.
The current Apple thinking is that the entire world has access to fast broadband and wants to distribute home movies to friends and relatives via download (iCloud) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. That worked for some, but is now said to have been withdrawn by Apple. Also, you can complain bitterly here, perhaps suggesting that Apple could have provided a choice between using iCloud and burning DVDs:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that comes with OS 10.7 Lion (which also omitted iWeb) or will come with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast.

IDVD will only burn to 16X discs and not 8X

I replaced my original superdrive with a pioneer DVR-100 because it can burn at 16X speed and dual layer. Now, iDVD will only burn to 16X discs. When I try to use 8X discs I get an error message. iDVD will begin to write, the disc will spin up twice, then the disc is ejected. The really annoying thing is that it makes those discs unusable.
Any ideas how to fix this.

What brand DVD-R?
I burn Verbatim DVD-R 16X at 4X all the time using a disk image and Toast (or Disk Utility). Try Verbatim. I use other brands too. In both of my "SuperDrives."
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Burning iPhoto albums to a disk image ? (not to a CD or DVD...)

Hello,
The built-in burn function in iPhoto is great because it keeps all metadata, ratings, etc., on the discs.
But can iPhoto burn to a disk image (.dmg file) instead of burning to a CD or DVD?
In other words, is there a trick or some software to "redirect" all the data to a disk image?
Thanks in advance for any answer!

Hi,
I understand what you're asking and have not found a way to do it. However here are a couple of workarounds depending on what you would like to accomplish.
If you want to export images so that someone else can view them (e.g., without iPhoto), then:
1. Create a disk image and mount it
2. Use iPhoto's export command and point to the image.
If you want to export a "piece of your iPhoto library" complete with metadata, originals, keywords, events, etc.:
1. Create a disk image and mount it
2. Buy iPhoto Library Manager for $20: http://www.fatcatsoftware.com/iplm/
3. Create a new iPhoto library on the disk image
4. Within IPLM, copy the photos you want to "export" from your main iPhoto library to the new one on the disk image. Note that when you're done, the image will contain a single package (i.e., looks like a file in Finder) that's an iPhoto library with only the pictures you selected. iPhoto should be able to open this... (Double-check what I'm saying first, though, using the free trial of IPLM.)
Good luck,
Mike
It's not a perfect solution, but there are several

I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

It's also under the File menu.

My Adobe Premiere Elements 12 will not burn a DVD.

My Adobe Premiere Elements 12 ................. will not burn a DVD. I am using an ASUS model 11BB Desk top I recently purchased. The PC shuts down immeniately. I am using DVD-R mini and standard size disc. My subject Adobe works well on another computer.
Ken McAdams
Message was edited by: Geoff the kiwi
Serial number removed.
Note: never disclose your serial number.

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

New problem. I can not burn a playlist to disk.

New problem. I can not burn a playlist to disk. The 'checking playlist' now takes about one second, looks very much like a malfunction here. Seems to initialize the disk - them moves straight into 'burning/finalizing disk' which also takes about one second. Then 'burning - finishing disk takes a little longer -
Error reading is "The attempt to burn a disc failed. The disk drive didn't respond properly an can't recover.'
This happend once before a while back and I thought it was 'too skinny disks'. Using 'printable disks; seemed to fix the problem - until now.
Blank cd's can be opened in the finder and files burnt to them.
DVD's can be burned from DVD Pro.
Music cd's and dvd's can be played.
Just can't burn the itunes playlist.

lewelew
From your iMac? OS 10.9.2? iTunes? Other? please give as much info as you can about your system hardware and peripherals, OS, software, etc. Is this misbehavior new? First try? You get the idea, too much info is not possible.
CCC

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.
Vista Ultimate
Let me know what other info you need.
Thanks for your help.

Yes, the lowest possible Burn speed will be a step in the direction of compatibility.
As for the Quality setting, Robert Johnson has done tests on various versions of PE and has recommend a setting of about 7.8 (IIRC). Unlike Encore, where one has many more choices, PE limits one to a Quality setting of 8. This is about equivilent to the recommend 7MB/s in Encore. Robert found that just below the 8 max. actually yielded slightly better results, than did the full 8, on his tests.
The three things that help to insure the greatest compatibility with set-top players are, and in pretty much this order:
1.) Quality media - Verbatim, Taiyo Yuden or Falcon (US only)
2.) Burn speed (slower is better. It might take a few minutes more, but if it works, you don't have returns or have to do it again.)
3.) Bit-rate around 7MB/sec
Remember - no set-top player HAS to play any Burned DVD. Most do, but some just do not - only replicated, pressed discs. Also, some player are still sensitive to the -R and +R media types. This is less a problem with newer units, however it still could be an issue with many older ones.
Personally, I test a "master" on four different players, plus my computer, before I Burn a batch, or ship out any. One unit is a very high-end Marantz, another is a mid-level Marantz, one is an RCA "el cheapo" and the other is an older Pioneer. I figure if the disc plays everywhere, there is a good chance that it will play for the client - though there are still no guarantees.
Good luck,
Hunt

How do I play (not burn) a DVD on Yosemite OS. I have a built in player.

How do I play (not burn) a DVD on Yosemite OS? I have a DVD player inside my MacPro.

Open:
/Applications/DVD Player.app
Insert the DVD.
Press Play.

DVD is Not Burning in DVD Studio Pro

DVD is Not Burning in DVD Studio Pro 4.2.0

I used build and format approach. Both discs play fine on computer platforms, but not on a consumer DVD connected to the TV. Normally I have no problem. I checked and rechecked several times all the preferences for Studio Pro. The only thing I noticed was instead of generating a Video and Audio TS file, it generated one HVDVD_TS file. Is this the issue? If so,where do I correct this (in the settings)?
Thanks

Need Help! How to Burn a DVD from an Image on my Desktop

I have an image on my desktop that I want to burn so that it can be played in any or most DVD players. I put an empty DVD-R in my drive and opened it with finder. Dragged and dropped the image and burned it. That does not work in the DVD Player. Can someone please tell me how to do it right?
Thanks,
~Meko~
PS: Whish I still had the original DVD SP Project!

i could do with some help now!
i recently bought a macbook. its got a superdrive so its got a dvd burner.
i have copied dvds as disk images and i want to burn them but they are all more than 4.7gb, so they dont fit on a dvd.
is there any way i can get them to fit?? aldo, does burning as a disk image allow them to be played on a normal dvd player, and does it get rid of the region code?
thanks

Time Machine Error Message: "The backup disk image could not be mounted"

I just installed Time Capsule and the initial back up was going smoothly. Now
all I get is a and the Error message "The backup disk image could not be mounted". Can anyone help me troubleshoot this problem? Thanks.

This works, if there is no corruption in the sparse image. But after weeks of backups, my sparse image on a USB disk attached to an Airport Extreme was corrupted.
I am right now repairing it by connecting the USB disk directly and using disk utility. It recovered the file system and is not rebuilding the B-Tree. I hope that works, otherwise it will have to be disk warrior...
On Time Capsule, I have heard folks having success with attaching the image, and then repairing it:
hdiutil attach -nomount -readwrite /path/to/sparse/image
Your mileage may vary, but you do not have a lot to lose in this circumstance...
This functionality should really be in the Airport or Time Capsule, or at least Disk Utility or Airport Utility.

I'm having trouble backing up my second macbook to a new time capsule. continue to get an error message -- "Time Machine Error. The backup disk image could not be created." Is there something I need to change in my time capsule or time machine?

I just set up a new time capsule. it worked fine on my first macbook. But now I cannot backup my second macbook. Getting "Time Machine Error" "The backup disk image could not be created." Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?

Try #C9 in Pondini's Time Machine Troublshooting
http://pondini.org/TM/Troubleshooting.html

Time Machine / Time Capsule Error: Backup disk image could not be mounted

So I'm trying to back up to time machine, which used to be working fine, but I have this problem happening on two computers now (which probably means the error is in my Time Capsule.)
The Time Capsule shows up on my "shared" list in my finder windows.
I can connect to it, and open the folder inside, and SEE my two disk image files in there.
But Time Machine gives me a "The Backup Disk Image Could Not Be Mounted" error. No other information.
If I double-click on the disk image file directly, I get an error "The Following disk images failed to mount" and then it lists the file and says "Resource temporarily unavailable."
Help, please.

I'm caught in the same loop, with no end in sight. I've only been using Time Machine and Time Capsule for 2 months. This week it stopped working. First error message:
"Unable to complete backup. An error occurred while copying files to the backup volume."
Checking the Time Machine preferences, "Last backup" would read "backup failed"
When I got this error, all the wireless functions went offline, even thought the TC light was still green.
I would shut down, shut down the Time Capsule, shut off my modem reboot everything in order.
Next error message:
"Disk repair. The disk 'Backup of [my computer]' was not repairable by this computer. It is being made available to you with limited functionality. You must backup your data and reformat the drive."
Then: "Time Machine Error: The backup volume is read only. To select a different volume ... Time Machine preferences ... "
I spoke to someone at Apple, who sent me the Time Machine Troubleshooting page:
http://support.apple.com/kb/HT3275?viewlocale=en_US
I went through:
1. updated my system software
2. updated the TC firmware to 7.4.1
3. dragged the sparsebundle to DiskUtility. It took a while (more than an hour?) but said the disk could not be repaired. When I tried again, the repair function wouldn't run.
4. tried to delete the sparsebundle, but it would choke at almost the end, sometimes it would just crash the finder, sometimes say "Sorry, an unexpected error occurred," sometimes "Operation cannot be completed because the item 'bands' is in use." I even tried to Stuff the bundle with 'delete original' checked, but the stuffing, after about 15 hours, jammed near the end (stuffed 20 gigs of 35 gigs).
5. tried to reselect the TC, and run backup anyways ... now it can't find the volume, back to the error messages and crashing Finder
6. checked password in Keychain, all ok.
Now what??
Do I use Airport Utility to erase it? At least TC is still showing up there. Or press the rest button on the back of the Time Capsule to reset to factory defaults?
I've resigned myself to losing my backups. Now I would just like to get it up and running again.
In hopes,
Linda

IDVD will not burn a DVD - just disk image - why not?

Similar Messages

Maybe you are looking for