IDVD will not recognize iMovie chapter marker updates

I have also posted this to the iDVD forum. I am authoring a video in iMovie 6.0.3, have marked about 24 chapters in it, and and have put it into iDVD 6. I wanted to move one marker by a few seconds, so I removed it in iMovie, and added a new one where I wanted it to be. I re-opened the file in iDVD and it asked me if I wanted to accept the modifications to the iMovie file, to which I responded yes. It is bad enough that doing so wipes out the careful edits I had done for the pictures on all the chapter buttons (I am using "Reflection Dark" theme), but worse than that, iDVD simply refuses to accept the new chapter marker, and clicking on its button instead takes me to the next chapter. So there are now two adjacent buttons going to the same chapter marker, and none going to this modified one. This is simply absurd. Does anyone know how to get round this, and make iDVD accept the chapter marker changes?

Those are the only two apps that I'm aware of for the Mac for burning video DVDs. There was DVD Studio Pro at one time but that's no longer available.
Just did a Google search and found this hit: How to Burn HD Video to DVD on Mac OS X. Its site indicates that there are menu selections. If you try it and it's successfull be sure to post back with the results.
OT

Similar Messages

Got a new ipod touch 4th generation but i tunes will not recognize it after i updated my itune, help

got a new ipod touch 4th generation but i tunes will not recognize it after i updated my itune, help

What happens when you try to install the iTunes update? Error messages?
You might have better luck posting in the iTunes forum sinc you have an iTunes problem, not an iPod problem.

IDVD will not burn disc after QT update

IDVd used to work just fine. I did software update and updated Quicktime to version 7. I found that my Quicktime Pro key for QT 6 would not work with QT 7. I called Apple support and they told me how to revert back to QT 6. I followed their steps and successfully have QT Pro 6 back, but not my iDVD projects will not burn. It gets to stage 4 multiplex and burn and spins for hours. When I hit cancel, the disc ejects and is unburnt.
I have followed Apples steps to solve a no burn when you upgrade to iDVD 4.0.1 (remove encoded assets) and this does not fix the problem.

Hi Dennis
There is ways to delete all of QT and then make a clean install but the
easiest way is to download a back to QT 6.5.2 file from Apple support
and downloads.
I've done this and keep it till I get an upgrade that takes away the old
files before installing the new ones.
Yours Bengt W

IDVD will not burn iMovie

I prepared an iMovie, "shared" into iDVD, and waited the roughly 3 1/2 hours while processing occurred. The burn cycle never started. I got a message indicating something like "multiplex errors". I also tried to burn using Disk Utility - also unsuccessful. iDVD map indicated no problems. The movie plays fine in iMovie on the monitor. Space is not a problem and my iLife is the latest version. I'm using a 2.16 Intel core 2 Duo.
The only thing I can think of is the fact that I downloaded the tape from my Canon H10 using an older, 800 MHz, G4 iMac and got an error message indicating that the computer was not fast enough for the job. The tape downloaded, however, although it took a bit longer, i.e., it didn't download in real time.

This is my first time using iLife so I may have done a number of things that could have caused the problem. Here's more info... I downloaded close to four hours worth of video from the HD10 using my old G4 iMac. I then used this "movie" in my new Intel machine to create a 42 min. version. The soundtrack consists of HD 10 soundtrack plus sound imported from iTunes. The CDs downloaded to iTunes were either my own or from the library. I did, however, put my iPhoto and iMusic apps, as well as a movie folder, on a 500GB hard drive. So all of the above activity has taken place on the 500GB HD. I did not rename, move, or delete the Movies folder in Home. I just created a new folder. However, I also tried putting my 42 min. movie into the Movies folder in Home and reran the process - no change
I will delete iDVD prefs and run the process again to see if anything changes.
Based on some other postings, I reran the process selecting my movie from the Media menu of iDVD (as opposed to sharing to iDVD from iMovie) and nothing changed.
The movie also contains slides - all have the Burns effect and were not shared to iDVD separately. I prepared a complete movie, including chapters, before going to iDVD.
I suppose I could start all over downloading from the HD 10 to my Intel machine, but it took me months of editing to get where I am, so that's kind of a last resort. Since this was my first effort, I'm sure it would go a bit faster the next time, but I would really like to be more confident that that will fix the problem.

HT1338 iDVD will not update

My iDVD will not update I have been trying to for last three months

Have you tried with this download link:
http://support.apple.com/kb/DL1414
I'm surprised you wouldn't have 7.1.2 already since it came out last year. There were some problems with iDVD during early Lion iterations last year and I sent in many bug reports - Apple responded and fixed them all and I haven't had a problem using it since. It does occasionally throw a little fit such as not wanting to recognize some audio I want to use in the menu instead of the default, but will work in the end.
If that update does not work - how did you install iDVD in the first place? If you have iLife retail disks, I'd suggest deleting what you have and reinstalling, then updating to the latest version. That's what I've been doing - I actually start with iLife 08 (needed for the install of the old iMovie HD 6 which I prefer to work with), install iMovie HD, then go to iLife 09, and finally to iLife 11 (with updates in between).

IDVD wont recognize iMovie chapter markers

I have made sure the appropriate boxes are checked and unchecked in the preferences menu of iDVD, yet the iDVD project wont recognize the chapter markers created in imovie. I have made sure to save the updated iMovie after the chapters were added.

hi, how are you 'exporting' in FCE ? Exporting via Quicktime Movie is the only way to preserve the chapter markers. In other words, if you used "export using quicktime conversion" you don't get them. check out my thread here for more info:
http://discussions.apple.com/thread.jspa?threadID=2406281&tstart=0

I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. HELP!!

I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. All I want to do is put my music from itunes on my computer to my new phone. HELP please!!

i called apple and they are sending me snow leopard so i should, *fingers crossed, be able to run the newer version of itunes. we'll find out for sure in a few days when it arrives

My mac had it's original software re-installed by Apple. since they did this, my airbook pro will not recognize my iphone in Itunes, and I cannot update the latest version of itunes, because it says I'm not running the latest version mac software????

I my macbook pro will not recognize my iphone. I had the AppleStore, re-install my original software a month or two ago, but since they did this, my computer cannot recognize my Iphone it is telling me that I also need to download the new version of Itunes, but keeps telling me my system isn't running the correct software. When I go to update my software, it's telling me I'm running the latest version??? HELP!!

you need to upgrade your OSX to 10.6.8 or later to sync with the iPhone 5. as you need itunes 10.7 to run Iphone 5

Itunes recently updated on my PC and now it will not recognize my iPhone. How do I get it to recognize so I can sync?

I updated iTunes this morning and afterwards I went to sync my iPhone and iTunes will not recognize the iPhone. The computer will, but iTunes will not. How do I get iTunes to recognize the iPhone so I can sync. I do have the phone connected to the computer with the cable.

http://support.apple.com/kb/TS1538
Going to venture a guess your Apple Mobile Device service isn't started.

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

My iPhone 5 has my old email address and password in it, I updated both online, but my phone will not recognize and therefore has now locked me out of my photo stream. how do I change my iCloud email on my phone???

Please help.
iCloud on my iPhone still has my old email in it with no option to update it. I have no access to the old email. I updated my email and password online via my macbook, but my phone will not recognize either! It keeps popping up a screen for me to enter my password, but it says it's incorrect.
How do I fix this on my phone?????
I can't fix it online because my iCloud online (although working) does not recognize either of my devices because they need updated….which I'm not able to do due to storage issues.
I just want my phone to recognize the new email and password!!
I have no idea what I'm doing but I'm about to throw this phone across the room.
thanks!

Welcome to the Apple community.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and tested on: 2014/05/23
You should still be able to log into an old email account, even if you haven't used it for some time, very few providers delete email accounts.

My computer will not recognize my IPhone 4 after being updated

I was updating my iphone and the screen changed to "plug into itunes" in the middle of it, but it was already plugged in. Now my computer will not recognize that my iphone is plugged in and it is stuck on the "plug into itunes" screen. what should I do? It makes a sound when I plug it into my computer but not the same sound that it usually makes when I normally plug it in.

Phone not recognised in itunes
device not recognised by iTunes on PC or device not recognised by iTunes on Mac
Some of those things which concern itunes also help with your problem. In particular try rebooting the computer, try a different USB cable to attach the phone or try a different port

IDVD will not launch in iMovie HD 5.0.2

The iDVD will not launch as a notice says it won't launch with my version of osx. I want to be able to burn DVDs but can't. Suggestions???

If you want to use the iLife programs,per Niels response on your other post, you need to upgrade to iLife '06. Looking at the requirements, iLife '06 is the only version you can upgrade to, as iLife '08 and later require Intel processors for iMovie and other functions. One place you can buy it from is: http://hardcoremac.stores.yahoo.net/ilife06.html .
There are some freebie DVD burning programs available, however, you lose the integration that the iLife programs bring with them.
Roxio makes several programs that will burn DVD's. I've used Toast Titanium for years and can recommend it. See http://www.roxio.com/

After attempting to update to latest software, iphone 4 stuck showing connect to itunes picture screen, computer will not recognize device, have tried restarting/restoring/hard reset/every suggestion listed on apple troubleshooting website. thoughts?

after attempting to update to latest software, my iphone 4 is stuck showing "connect to itunes" picture screen. My computer will not recognize device. I have tried restarting/restoring/hard reset/reinstalling itunes and every other suggestion listed on apple troubleshooting website. thoughts?

The next step is to try recovery mode as described here:
iOS: Unable to update or restore

HT4124 Macbook Pro 10.6.8 Imovie will not recognize Sony Handycam DCR-HC38 via Firewire 800-9pin cable. Is it not compatible? It worked with previous Macbook (black) with prev. firewire version.

Have tried to connect Sony Handycam DCR-HC38 to Macbook Pro via Firewire 800-9pin to 4-pin cable. I Movie will not recognize camera. I have transferred media on old Macbook (black version) with different firewire. Does the new IMovie not support this product?
Thanks

Hi,
Did you solved this problem?
I have the same situation here...
Regards

IDVD will not recognize iMovie chapter marker updates

Similar Messages

Maybe you are looking for