IDVD won't burn

So iDVD refuses to burn the disc. Up until it tells us to insert a recordable DVD, everything is fine—then when we insert a recordable DVD, it takes it for a few seconds, then spits it back out without any kind of reason whatsoever. Help?

Hi
Exactly as Shippey writes.
After You done the Disk Image.
Burn at a reduced speed - x1 or x4 (most recommended) to get as few write errors possibly.
In despair - this might occasional work on a Memorex - no guarantee though.
Yours Bengt W

Similar Messages

  • IDVD won't burn since latest update

    Ever since the latest update iDVD won't burn a disc. It says that there is no disc in the drive. I have tried TDK DVD-R and Verbatim DVD-R discs. This is ******* me off something fierce. Please help.

    Have you tried to burn a data DVD from the finder?
    What does System Profiler (about this mac > more info) say under diskburning?
    Also a cold restart (all power off for 5 minutes) and zapping the PRAM and PMU can reset optical drives.
    http://docs.info.apple.com/article.html?artnum=88275
    http://docs.info.apple.com/article.html?artnum=2238
    http://docs.info.apple.com/article.html?artnum=303319
    John B.

  • OSX Lion: iDVD won't burn completely.

    I use iDVD on Lion, and it's my first time using this software.  I love it so far, except it won't burn.  I've tried twice now to burn a DVD and it gets stuck on the same part each time.  It is after hitting burn, it processes the content for an hour or so and the progress bar is completely full and it ejects the disk.  It doesn't complete the burn though, it gets stuck on "Multiplexing and Burning...", the progress bar remains full, and the time remaining says "about one minute".  It doesn't go anywhere from here, even if I push the disc back in.
    What should I do?

    I can't answer specifially to what your problem is, but I had the same problem. I tried many different kinds of DVD Rs from Radio Shack and nothing worked. Then I bought Apple's DVD -Rs and I it finally worked. I think it has something to do with the DVD R needing to work at various burn speeds. 1x 4x 8x etc. This should not be the case, Apple should explain why the burning is so finicky, but it di finally work for me.

  • IDVD Won't Burn (crashes like crazy)

    I know there have been other topics discussing iDVD crash problems, so I apologize if my answer already exists.
    I've had this iMac for 4 days now and can't seem to get iDVD to work right. It starts with startup issues. Often, I'll open a project I started and it will just lock up. I get a message telling me I have duration issues and to lower the encoding level to correct it, but when I clock OK it just sits there. I check the Force Quit menu, and it says it's not responding. If I am able to get past this, I lower the encoding level, then try to burn it. It goes through the entire encoding process, but when it gets to the burning step it crashes. The prompt pops up telling me I've inserted a blank DVD (which I didn't) and iDVD says it unexpectedly quit. I just don't get it. This isn't supposed to work like this.
    Can anyone give me some things I can try before getting Apple on the phone?

    Hello, DT,
    Welcome to the discussions.
    First, no, iDVD is not supposed to work like that :)!
    Things to do that may help:
    Delete iDVD's preference files. Close iDVD.
    Go to your Home(icon with your user name)/Library/Preferences/com.apple.idvd.plist
    Drag this plist to the trash. Don't worry. iDVD will create a new fresh one when you relaunch it.
    Repair permissions on your hard drive. Again, close iDVD and other open apps. Open Disk Utility(in Applications/Utilities). Make sure the 'First Aid' button is selected, highlight your computer drive's name, and choose to repair permissions.
    Now reopen iDVD and see if it is working properly.
    Be sure to use a good brand of DVD-R disk for burning--Verbatim and Maxell are recommended, not Memorex.
    One other recommendation is to do a 'save as disk image' with all your iDVD projects, and burn your disks from the disk image instead of directly from iDVD, using Disk Utility.
    This process of creating a disk image looks exactly like the burn process, but instead of getting a burned disk, you get the disk image. This allows you to see if there are problems with your iDVD project, so you don't waste disks. You can choose a slower burn speed; 4x or less is recommended.It also allows you the option of burning more disks at a later date. Unlike an iDVD project, a disk image is self-contained, so once you know the disk image is fine, you can safely delete the original iMovie and the original iDVD projects, thus saving drive space, without losing your projects.
    Here are some links to further information about disk image creation and burning:
    http://discussions.apple.com/thread.jspa?threadID=914789&tstart=0
    http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh3.html
    http://docs.info.apple.com/article.html?artnum=93006
    Post back if none of this helps you!

  • IDVD won't burn DVD

    Using IDVD 5. and Sony-R DVD's. Trying to burn slide show imported from IPHOTO, and graphics imported from IMOVIE, and get an error #1 or multiplexing problem.

    Man, you're about the millionth person to post an error #1. Search the group for possible solution(s).
    Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
    http://docs.info.apple.com/article.html?artnum=164927
    This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Disk Utility to burn the DVD.
    Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (not the .img, the one below) in the left-hand window. Click the Burn icon. Your SuperDrive tray will open. Insert a recordable DVD. (DVD-R preferred by me.) Click the Close button. Wait. Then click the Burn button.
    -->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and Tiger.
    b Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
    http://docs.info.apple.com/article.html?artnum=93006
    Try Verbatim DVD-R rather than Sony.

  • Idvd won't burn dual layer movies

    Hi. Can someone help me figure out how to make my idvd burn dual layerd movies? I've done everything the same as I always have and it still won't do it. Do I need to buy something other than Sony discs? I'm at my whits end. Any ideas out there?

    sherryle wrote:
    what is a screen shot?
    <http://en.wikipedia.org/wiki/Screen_shot>
    Read the intro and the Mac OS X section. When you compose a post, you may add a screen shot by clicking the camera button and following the instructions.
    Under the cricumstances, I think it's better to start a little further back.
    Quit all apps and restart the Mac.
    After you've logged back in, first check how much free disk space you have. In Finder, select your hard disk and choose File > Get Info. Look at the General section (if it's not expanded, click the disclosure triangle to the left of the word "General". Check the figure for "Available". If it's not al least 12GB, you need to clear up disk space. You should have at least 12GB free disk space to proceed. (This is not a carved-in-stone figure, but something that should keep you on the safe side. More is better; but there's no need to exaggerate.)
    Next, let's check the drive. Press the Option (⌥) key and click the Apple () menu. The first item on the menu should be "System Profiler…" When System Profiler is up and running, under "Contents" you should see the line "Hardware". If it's not expanded, click the disclosure triangle to the left of the word "Hardware". A few lines down, you should see "Disk Burning". Click on it. You should get the details of your DVD drive. "Burn support" should say "Yes"; "DVD-Write" should say "-R, -R DL, -RW, +R, +R DL, +RW". If all that is correct, quit System Profiler.
    Next, start iDVD. If no project is available, it should show the opening dialogue.
    Click on Magic iDVD. In the Magic window, type a short name for "DVD Title". Let's say, Test.
    Drag your movie to the "Drop Movies Here" strip.
    On the bottom right there are two buttons, "Create Project" and "Burn". Click the "Create Project" button. iDVD should generate and save the project. The Project window should appear.
    Choose "Project Info…" from the Project menu. Check the choice for "DVD Type". It should be "Double-Layer (DL) - 7.7GB". If it isn't, make it so. Close the Project Info window.
    Now choose File > Burn DVD… Make sure the DVD you insert is indeed a DL (it should be marked as such, and the label should say something like "8.5GB data").
    If it fails as before, you should return to the project window. This time, choose File > Save as Disc Image… Save it to a convenient location.
    Open Disk Utility. Choose Images > Burn…, select the image saved in the previous step, and try to burn it. If it works, then the problem is with iDVD. (Keep in mind that a DL disc burned with Disk Utility may not work or may cause problems in a DVD player. This is only a test to try to isolate the problem.)
    If it doesn't work with Disk Utility either, then the problem is with the drive or the disc. Reset the SMC and try again.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    <http://support.apple.com/kb/HT3964>
    If it still doesn't work, try a different brand of discs, from a different manufacturer (and preferably manufactured in a different country).
    If several brands of discs fail, then the problem is likely with the drive. Get a lens cleaning disc and use it to clean the drive. If that still doesn't solve the problem, then it's probable that the drive is damaged and should be replaced. If the drive is old (4–5 years) the likelihood that it's damaged increases.

  • Suddenly iDVD won't burn a disk

    I use iDVD a lot. I'm a pro photographer and I love it for showing off work to clients.
    I have a disk that I definitely, absolutely ned to get out of the door today and for the first time ever I hav problems with it. The burn gets all the way to the end (about an hour or so) and I get an error that the burn has failed with errors. (It's -34506 - it's supposed to point to an Applescript error).
    The disk is a slideshow from iPhoto + a folder of slideshows just created in iDVD. All of them preview correctly. I can burn other disks and if I drop the iPhoto slideshow then I can burn the disk (but I really need the iPhoto slideshow!).
    So far I have tried:
    switching to save image rather than a real burn
    reducing quality (to best perfomance - this burns but the quality is terrible - I need best quality)
    trashing the preference file
    rebuilding the slideshow in iPhoto including reimporting all the pics
    changing the theme
    I have run software update a couple of times to bring everything up to date. iDVD is version 5.01.
    Project duration is just over 28 minutes. Size is 0.8 GB. 5 tracks, 2 menus, 44 seconds of motion menus.
    Plenty of free disk space (93 GB on boot drive, 500 GB on all drives - really).
    HELP!!!!!!!

    Thanks Len.
    Sorry - should have posted back that I worked round this a couple of hours ago.
    I narrowed it down to one of 130 jpegs (or more than one - I just know there was something freaky in there). They were all edited files that originated on a D2X and were edited in Photoshop CS2 and all of them opened successfully in a bunch of applications.
    Anyway I wrote a PS action that reduced the size of each a little and resaved it. This should make sure that every byte of the file was rewritten. Reimport to iPhoto and rebuild the slideshow. Export to iDVD and burn - and it worked!
    Did a search on 34506 and it really looks to me that there is some kind of lurking bug deep in iLife - when an app finds a file it doesn't like it chokes the whole system. What's weird is that the crash isn't in an app that's processing the file directly. I rendered the jpegs into an avi with Fotomajico. This worked fine and the avi played beautifully but iDVD crashed when trying to burn it.
    I guess one day there will be an iDVD update and this error will majically go away.....

  • IDVD won't burn discs

    When burning a project to disc it goes through all encoding alright until it comes to the last step: as soon as it hits ‘multiplexng/burning’ IDVD quits. I am left with nothing but an empty, untouched DVD in my (internal) burner.
    Can anyone enlighten me please?

    what external devices are currently connected to your mac?
    tell me what you've tried so far?
    what kind of media did you use?
    have you tried a simple restart of your mac with no external 3rd party devices connected?
    and have you tried using Verbatim or Maxell DVD-R?
    How much available HD space is remaining on the startup volume / HD?

  • IDVD won't burn my project!!

    I have FCP and I exported using the Quicktime movie option. I took it into iMovie, organized it, and saved it. I went to iDVD, pulled the movies, go to burn the disc and the following happens: I insert the disk when prompted, it then says "waiting for device to be ready," then spits out the blank DVD! What's going on?! Am I exporting the wrong format? This has worked before and I'm somewhat confused. PLEASE HELP!!

    To do test with DVD-RW and avoid burning coasters DVD-R, you have to trick iDVD4.
    The trick with iDVD4 is to originally insert a Blank DVD-R, and then it will accept it. While it's begining encoding your project, press the eject CD button on your keyboard. You might have to hold it a few seconds. it will eject the DVD-R and replace it with the DVD-RW and push the tray back or press eject button again to retract the tray.
    Et voila you have tricked iDVD4 that it has a DVD-R on its hand, when in reality it will burn on a DVD-RW
    Michel

  • IDVD won't burn DVD, previews fine

    Hello,
    I am trying to burn a fcp 5 project onto a dvd+r with idvd. the project previewed fine in the idvd, but when i put the dvd in, it says it can't read the dvd and that there's nothing in the drive. The dvds are brand new and have never been used. I burn cd in itunes fine, any suggestions?

    Hi St Louis:
    Are you sure you have a Super Drive? Check your System Profiler. It should look like this:
    Manufacturer: MATSHITA
    Model: MATSHITA DVD-R UJ-825
    Revision: DBN7
    Serial Number:
    Drive Type: CD-RW/DVD-RW
    Disc Burning: Apple Supported/Shipped
    Removable Media: Yes
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Also, if you do have a Super Dive, you may want to try DVD-R.
    Sue

  • IDVD won't burn DVD, keeps showing up with "You Inserted a blank DVD..."

    I keep getting the error during the encoding process for burning. The prompt shows up as if i just inserted a new blank DVD, and gives me an encoding video error.
    Does anyone know how to prevent this?

    You can set preferences within apps like roxio toast to automatically launch when Blank dvd media is inserted into your mac / burner. And if this is the case then you may need to address these preferences so they don't overtake iDvd from the start.
    Check your preferences for burning a dvd as to which app/s you have selected to perform this function. Perhaps you have another app other than iDvd selected.
    Hope this helps but if not just come on back.
    Message was edited by: SDMacuser

  • IDVD Won't Burn Some DVDs

    I bought some DVDs used and for some reason, they don't play well on my DVD player. I think it might be due to scratches. Anyways, they play fine on my computer so I ripped them onto my computer. Now I want to burn them onto DVDs but iDVD doesn't work for all of them. When I try burning I Love You, Man, it says there's an error building, which occurs at the burning stage. When I try to burn 13 Going On 30, it stops before anything even really starts.
    Help, please!

    Ripping DVDs or making copies, for whatever reason, goes against copyright laws and is illegal.
    From the Apple Discussions Terms of Use:
    8.2: Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    I'd recommend that you either buy new copies of the DVDs in question or find a store near you that advertises the ability to "fix" broken DVDs.

  • Movie clips in iDVD won't burn to disc image or a DVD

    I created an iDVD project with a slide show created in iPhoto and some movie clips I took with a digital camera that were also in iPhoto. It works great in iDVD preview. When I burn a disc image or a DVD, the movie clips don't play while the slideshow is fine. There is also the clue in the menu of the project (only on the disc image or DVD, not the iDVD preview) that the printing of the names of the movie clips is clearly lighter than the name of the slideshow. During the burning to disc or DVD, one can see the movie clips supposedly being encoded and no error messages occur. This is a birthday present. Help, please.

    It's become a moot point. It turns out that while I could navigate with the mouse with respect to the slide show (on both the disc image and the DVD I burned), I had to use the arrows and enter key to navigate and activate the movie clips. Once I figured out to use the arrow keys/enter key rather than the mouse, everything worked okay. Thanks for trying to help me!

  • IDVD won't burn a disc.

    The "burn" cycyl of iDVD ejects the disc before the burn cycle is complete. There are two minutes left each time. I have tried burning projects that have burned successfully in the past, with the same result. What am I doing wrong?
    Thanks.

    Hi
    What am I doing wrong?
    Yes - how about do You think we will know ?
    When You feed us no info at all !
    • What kind of material did You feed iDVD (Video-codecs, Photo fiel formats and Audio file formats)
    • How long in duration is material - in minutes ?
    • What theme did You select to use ?
    • is this theme Animated or Still ?
    • Any Music/Audio on theme MENU ?
    • What BRAND of DVD did You use ?
    • What type of DVD did You use ?
    • What Encoding Quality did You use ?
    • Free Space on Start-Up (Mac OS) Hard Disk - How Much ?
    • Version of iDVD ?
    And that's just to start us up
    DID YOU TRY (or Please DO)
    • Save as a DiskImage
    • test play this with Apple DVD-tool
    • then burn this .img file to a DVD - BY USING - Apple Disk Util tool
    This way we find out where in the process it goes wrong.
    Yours wanting to help - but never any good in MIND-READING - Bengt W

  • Suddenly iDVD won't burn my movie.

    Today I tried to burn a copy of a movie I've made with a Memorex DVD-R, and it says the project is too large; that I have to insert a double layer DVD. The confusing part is I burned three DVDs of the project with the same type of disc yesterday and they all came out fine. Has anyone encountered a similar problem/does anyone know how to fix it?
    Message was edited by: Paynegwynn

    Welcome to the forums.
    One way to reduce the errors in burning DVDs is to use the Save As Disk Image option in iDVD. This separates the burning process into two steps and also makes it easier to burn copies. Even at this stage, you may wish to use Disk Utility to make a disk image and see if that makes more consistent copies.
    John

Maybe you are looking for