IDVD won't link right

I am certainly having problems creating a iDVD on my iMac G5 - OS 10.4.9 - using iDVD version 6. Through this forum, I was helped to solve why dozens of pictures did not appear in my iDVD program. It seems they were corrupt after taking them directly from iPhoto into my iDVD program. However, someone suggested to bring the images from iPhoto to the desktop and then into my iDVD program. This worked.
Now, I am doing the same thing all over again (putting iPhoto pictures on to the desktop and into my iDVD program) because somehow when I was trying to solve the problem which I will describe below, nearly all of the pictures disappeared. Not all, which is confusing to say the least, but about 90% out of about 820 pictures. I did delete the desktop pictures. Then when I opened my iDVD program, the pictures were gone. I don’t see how this would make any difference, but maybe it does. I did try putting my current pictures into the trash, but my incomplete iDVD program is OK, so far.
Here is the problem that I have been trying to solve: I dragged a movie from my iDVD movie list into the first icon which automatically plays. This part of my program works. However after it stops and I click to go to the next menu it skips the next two menus and goes to a menu which links to ten short movies. It should have gone to at least the menu before this one. Here I have a button choice of going to the ten movies or to my slide show. This happens even when the first movie is looped. I have tried saving my iDVD program to a disk and then burn the disk. It does the same thing. I tried deleting ---
com.apple.iDvd.plist --- empty the trash and restart the computer and then repair permission on the hard drive. It didn’t work. The same thing happens as described above.
Wouldn’t you think that Apple would make their iDVD program work better than this? My gosh, look at the pages and pages of people who have questions in this forum about how to work the software!

In terms of deleting pictures from the desktop, this isn't a good idea until you're completely finished with your project and burned all the DVD copies you need. iDVD's slideshow feature needs those picture files to be where they were when you created the slideshow -- when the DVD gets burned, iDVD looks to find the photos, and there's trouble when they've been moved (or trashed).
Also, why not use iPhoto's slideshow capability? Easy to organize the photos, you won't have to export them... iPhoto will create a Quicktime movie (use Share/Export to Full Quality) that can be dragged into iDVD (not in a "drop zone").
John

Similar Messages

  • IDVD won't recognize imovie project

    Hello people.
    I have an 09 Mac desktop computer. I have now made seven iMovie projects ranging from ten minutes to almost two hours. Each time I shared the project with iDVD to burn the finished product to disc. Each time I made sure I could play back the movie on our DVD player.
    I was able to play back each of these movies on my computer as the files ( I am assuming they were files ) were automatically stored in a movies folder right after they were shared with iDVD from iMovie. Since they take up space on the hard drive, I decided to store the files on an external hard drive. I believe each one copied to the hard drive. Once each one was on the hard drive, I made sure I could play it back. Then I trashed each file on the computer, again making sure right after that I could still play each file on the external drive. They would open in iDVD and I could play them. All was good.
    Recently I made another iMovie project of my children's high school play. As I did before, I shared it with iDVD and it appeared to be working as usual. It was to take approx. 30 minutes to create the movie from the project. HERE IS MY FIRST PROBLEM! Usually after the movie is created, it then opens in iDVD and from here I can burn to disc. iDVD did not open! I tried a couple of times and nothing. I then tried a short 30 second clip from iMovie with no titles or transitions or anything. This worked. iDVD opened after creating the short movie. My project is an hour long. Consequently with this project I shared it with the media browser and made it into an avi file. I then used a program ( Toast ) that came with my Roxio Converter ( VHS to DVD ) software to burn the movie to disc.
    HERE IS MY NEXT PROBLEM!  I went to view the movies on my hard drive and iDVD won't recognize them. It says it can't find the missing audio and video files. Can anyone help me with this?
    Thanks

    Hello darrenfromnanaimo
    Cross your fingers for a satisfactory answer to the "NEXT PROBLEM."  When you copied the iDVD files to your external drive and deleted them on your computer -- hopefully you just deleted the iDVD files and not the iMovie files.  If that's the case, you can reconnect the external iDVD files to the original iMovie files and you're back in business (open the external iDVD project and use it's browser to find the original iMovie files).  If the iMovie files were deleted, that's a more difficult problem -- you'll need to recreate the iMovie files (re-import from the camcorder and re-edit), or you'll have to "rip" your DVDs back into an electronic file (which gives you only the finished product of your original editing, with slightly degraded video resolution).
    John

  • TS3048 Keyboard won't link and screen is locked, I cant access Bluetooth settings

    My keyboard won't link and screen is locked, I cant access Bluetooth settings. What do I do?

    First make sure the batteries aren't dead and that the keyboard hasn't already been paired with another device. If it hasn't, the keyboard should pair automatically when you reboot. You may have to press and hold the power button on the right side of an Apple keyboard until the LED starts flashing.
    Otherwise see these support articles:
    Mac mini (Mid 2011 and later) and iMac (Late 2012): Bluetooth keyboard may not pair during Setup Assistant
    Apple Wireless Keyboard: Difficulty during pairing process
    If you have a third-party Bluetooth keyboard, you may need a wired keyboard to complete the pairing process. It's a good idea to keep a cheap wired keyboard and mouse or trackball as backups for a desktop Mac anyway, because Bluetooth isn't completely reliable.

  • IDVD won't open

    Hello, all.
    I need help again,please.
    I did something here that somehow screwed up Idvd. I went to Get Info of Quicktime player, Flip4mac and Idvd and changed
    Ownership & permissions to "read and write". Why?? 'cause I thought that It would solve a few minor issues I had with Quicktime and I felt too confident; I kept going!.
    On iDVD get info I did the following:
    Ownership & permissions I clicked "read & write
    Under Details: Owner I clicked on muy "home" folder name and I don't remember what was there before to click it back on.I do remember reading System under Owner but cannot remember where in the whole Get Info window.
    On the right side of the "owner" dropdown menu there is a locked lock; (unlocked doesn't work,I tried)
    Access: Read & write
    Under group: Faded "admin"
    Access: I clicked "no access" And,
    Under Other: Read only.
    Now, idvd won't open and the idvd icon turned to "application" icon. The ruler,pencil and brush in the shape of letter A. I shows like that on Finder and in the dock. I installed again my iLife'5 package hoping that it would solve the idvd problem but it didn't. Everything works fine except idvd.
    What can I do??? I wish I chopped off mi fingers instead of doing something that I wasn't sure about.
    I appreciate any help I can get from you guys.
    Thank you.

    You need to "Repair Permissions" to reset all Apple-Installed packages to their default settings. You can generally do this "live" in 10.3.9. Quit all Applications, launch Disk Utility, select your Boot drive and click "Repair Permissions" and after many scrolling messages and several minutes, all should be set right.
    If you want to read about what it is doing, there is a pretty good explanation in this article:
    25751- About Disk Utility's Repair Disk Permissions feature

  • IDVD won't load large project file..Help!

    iDVD won't load large project file once I close the program for the first time since finishing the project.  Basically, I made a compilation DVD of numerous individual files spread across quite a few folders/sub-menus totaling about 236 minutes on a Dual Layer DVD+R.  I closed the project prior to burning but now, iDVD gets the rainbow wheel everytime you try to load that particular project.  What's the deal?
    Notes:
    -iDVD does still load if I want to load another (smaller/simple project) or start a new one.
    -I've tried to start over from scratch a make the exact same project.  When I exited out and went to load it, it did the same thing.
    -I'm running Mac OSX 10.6.8 Snow Leopard and iDVD 7.1.2.
    Any suggestions?

    Premiere Elements is not part of the Cloud... and it has a different forum
    http://forums.adobe.com/community/premiere_elements?view=discussions
    When you go to the correct forum, you need to provide a LOT more information
    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    And some other questions...
    •What are you editing, and does your video have a red line over it BEFORE you do any work?
    •Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
    •Which version of Quicktime do you have installed?

  • IDVD won't properly encode a ripped .dv file;  Toast will

    I've been on this board before with this problem, but after a lot of effort trying to get this to work, here I am again. Having used Toast to extract a .dv file from a DVD I've worked on, I can't get iDVD to encode it properly; it jitters. I have tried EVERYTHING, different discs, different burners, "highest quality", "highest performance", etc. Looks great on my mac playing the .dv file directly, the DVD plays fine in my mac, but for some reason WON'T play right in DVD players (I went to Best Buy and tried it out in several, didn't play right in any of them). I'm STUMPED. Anyone have any ideas? If I burn the DVD in Toast, it works perfectly, but that front menu is quite ugly and amateurish and I'm using these DVDs as representations of my work...

    Having used Toast to extract a .dv file from a DVD I've worked on,
    How about some details about that process? Especially "from a DVD I've worked on,"
    I doubt all your RAM is from Apple. That could be a problem-causer, but I think it's more about that DVD and Toast...

  • My iPhone 5 won't link to my bluetooth headset.

      My iPhone 5 won't link to my bluetooth headset (Samsung).  It  just continuously shows 'searching'.  I've restarted the phone and bluetooth headset (fully charged) but it still can't find it.

    Supported Bluetooth Profiles
    http://support.apple.com/kb/HT3647

  • Idvd won't read my quicktime video

    I exported from FCP into Mpeg4 and now idvd won't read the video image on the file (even though it displays the image). the files are not copyrighted. i just need to burn onto a disk so that it can be uploaded later onto the internet. any way to fix my problem or to get around idvd?

    iDVD does not work with mpeg4.
    If the file is less than 4gb simply create a data DVD not a video DVD.
    x

  • IDVD won't ecode audio, 'not responding' = force quit

    IDVD 6 /10.4.7/MACPRO
    iDVD won't encode audio portion from iMovie had off.
    original iMovie from DV camera, iMove encodes QT, etc
    iDVD encodes video ( as noted by time bar) but when it gets to the audio portion it stops responding and then I have to forcve quit.
    repaired persmissions, and delited the iDVD.plist
    any thing I can do? iDVD 6 is the first time I used this after update

    Scooper,
    iDVD is "not" slow (nor fast) encoding (actually transcoding) audio. iDVD relies on the Quicktime framework. iDVD invokes an external library from the set of resources provided by QT.
    If the encoding appears to be slow. It may find its root in various origins. First, MacOSX is a Unix system. Unix is not "preemptive". It means that access to resources occurs thanks to a "good will" mode between processes (to make things short). So, it may appear that some processes are stale, but things are usually well under control (by the kernel). So, don't be hasty in killing a process reported as "not responding".
    If you consider that the encoding process takes too much time, there are ways to make things better. First: More RAM. No workaround to that. Give some room to your Mac. Keep also in mind to keep free room on hard drive at least equal to 2 1/2 times the amount of RAM of your system. The Unix kernel of your Mac handles a "swap" that is used to virtually create an amount of RAM larger than what your system physically has. The kernel simply uses your hard-drive as buffer to store copies of RAM blocks occupied by portions of code or data not currently active. If all this is too small, the kernel will spend an awful amount of time dealing with the short space (RAM + free disk space for swap).
    One way to figure out if you're in such case is to use one of the many administration tools available to you. Open Terminal (or a X11 xterm) and type 'top' (without quotes).
    Check the last line of the header for the "pageouts" indicator. If the number in parenthesis is not zero (0), repeatedly, it means that your kernel is swapping memory block from the physical RAM to the virtual RAM stored on the hard drive (swapping).
    Hit 'q' to quit top. You can also try 'top -o cpu'. This will get you which process is currently running requesting the most CPU resources. Normally, on a Unix system, if one process needs CPU and is mostly the only one at the moment asking for CPU, it can be allocated most of the available CPU time and jumps to over 80%. If you consider this "abnormal", just look at the "Load Avg." indicator. It tells you how many processes are "waiting" for their turn to access the CPU - it's averaged throughout the time, through 3 numbers. Remember the "good will" mechanism. If it remains low (up to 3, for a household Mac), then, do not worry. If it goes above, then try to quit some other user applications. An idle system reports numbers below 1.
    These few sysadmin tips will tell you a lot about your system's health. Perhaps, you'll figure out by yourself what's wrong. For sure, not iDVD
    Try perhaps upgrading to QT 7. There are benefits to that.
    T.

  • IDVD won't see movie folder

    Working on imovie project. Went to create idvd for the project. Wanted to rename the project and did so in finder. Now idvd won't see movies in the movie folder. Have tried resaving the project out of imovie as a different name, created a new folder for movies etc... any thoughts.

    Hi LBuchman !
    I am suprised you haven't had a good answer by now.
    I am new to iDVD 06 and have not used iMovie much.
    I have been working on an iDVD project,
    and had a similar problem, as I had moved my Movie files
    out of Movies folder to make room.
    I believe your problem may have occurred
    when you changed your title in FINDER.
    I would try going back to your last working iDVD project file
    BEFORE you changed it's title in FINDER;
    and in iDVD > File > Save As
    change your title AGAIN there.
    I believe it was the changing the title OUTSIDE of iDVD,
    the iDVD lost track of IT"S PARTS.
    As far as your Movies folder--
    iDVD looks for your movies
    in WHATEVER FOLDER you specify in
    iDVD PREFERENCES > Movies Pane.
    I hope you have already worked yourself an answer,
    or I hope this helps.
    Best Regards, Ken

  • IDVD won't burn since latest update

    Ever since the latest update iDVD won't burn a disc. It says that there is no disc in the drive. I have tried TDK DVD-R and Verbatim DVD-R discs. This is ******* me off something fierce. Please help.

    Have you tried to burn a data DVD from the finder?
    What does System Profiler (about this mac > more info) say under diskburning?
    Also a cold restart (all power off for 5 minutes) and zapping the PRAM and PMU can reset optical drives.
    http://docs.info.apple.com/article.html?artnum=88275
    http://docs.info.apple.com/article.html?artnum=2238
    http://docs.info.apple.com/article.html?artnum=303319
    John B.

  • Vector Mask won't link to Smart Object

    When I apply a vector layer mask to a Smart Object the mask won't link to the SO layer. Is there a way to force it to link?
    I can't resize or move them at the same time, which is driving me crazy.

    Put the SO in a group. Link the mask to the group.
    Or upgrade to CS4.

  • Why is the link to my form getting this message?  I copied the link right from the page.  An error has occurred. The form does not exist. Please re-enter the web address as the link may be misspelled. [ref: cixTdh4JnkymYgz7awKoQ, BadRequest]

    Why is the link to my form getting this message?  I copied the link right from the page.  An error has occurred. The form does not exist. Please re-enter the web address as the link may be misspelled. [ref: cixTdh4JnkymYgz7awKoQ, BadRequest]

    My form - which was working great - disappeared when I did some editing; here is the message I get now.
    The form does not exist. Please re-enter the web address as the link may be misspelled.
    The link for the form is:
    https://adobeformscentral.com/?f=UqJr%2Aas2RJIHPVA4iGIQ6w
    Please look into the matter and resolve the issue at the earliest.
    Regards,
    Vaibhav Nigam

  • My pages won't load right

    I ran PC Scan and Sweep by ascentive and now my pages won't load right. It's a programt hat cleans up old history and stuff
    == This happened ==
    Just once or twice
    == I ran Scan and Sweep

    Hello Anne.
    Read this support article and see if it helps:
    http://support.mozilla.com/en-US/kb/Websites+look+wrong
    If it doesn't, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • I made an imovie project that's over 2 hours so iDVD won't let me burn it onto a DVD.  What do I do?

    I made an iMovie project that's over 2 hours long so iDVD won't let me burn it onto a DVD.  What do I do now?

    Would I need to switch the disk in the middle of it burning so it can burn the other side
    No, you do not flip over the disk.  The dual-layers are both on the same side of the disk. You can't see them, they are just there, and iDVD will do what is necessary if it needs to burn both layers.
    You would only flip over a disk if it were a "double-sided" disk.  That's an entirely different kind of disk and it has only one layer on each side.  Those are much older kinds of disks that were used commercially before the advent of dual-layer disks.   I don't know anyone who uses them any more.

Maybe you are looking for