IDVD6 works fine with G4/400 and 10.4.11 ?

Hi everyone..
can anyone confirm, that above configuration works fine?
I specially mean the DVD Menu Titles...
ref. to thread http://discussions.apple.com/thread.jspa?messageID=8716733
Thank you much !
WH

Hi
If the speed 400MHz / 733MHz doesn't stop it from working please consider that
the encoding time needed will be extream.
I used a G4/600MHz with Devideon* resp an earlier version of iDVD and a movie
with a duration of 60 minutes needed about 24 to 36 hours to do the calculations
/encodings.
A weekend-project.
My dG5 2GHz is 1 hour movie = about 1 hour encoding (2 hours pro quality)
Just as reference.
If You got less than 10Gb of free space on internal (boot) hard disk my guess
(G4/400MHz) would be 1 hour movie about 1 week time to encode
AND MOST PROBABLY - Not a working DVD disk as a result.
Secure a minimum of 25Gb free space.
Yours Bengt W

Similar Messages

TS3899 Cannot send email with new iPad air. Works fine with old iPad and iPhone.

Cannot send email with new iPad air. Works fine with old iPad and iPhone. I have deleted account and reinstalled.

Thanks. I got the problem fixed. Spent time with the Apple folks and was kicked up to a senior advisor. It seems the problem was with my internet provider - Tmie Warner. Remember I could use the old ipad and the iphone to send mail. I checked all the specifics between the three units. It seems that TW is changing over from the RR.com to TWC.com. Since the new ipad air was just set up, it fell under the new TWC mail specifics.

Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton

HT201250 My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1

My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1
I have tried everything, even buy new external disk from different manufacture.
If I cant get a fix soon, I am downgrading back to SnowL.

Still no luck. I tried all the tricks, reconfiguring TM (remove selected disk option, and re-setting it, and trying different disks). Tried new combo updater, and the newer TM update after that. Tired two different disks too (one is my older firewire WD MyBook 1TB, and my brand new 3tb Seagate GoFlex USB... either one plugged into back of computer - no intermediary devices). I did get the TM buddy wiget and it produced the following log, from the last attempt, where I setup lots of exclusions so that backup quantity was small (under 10gb). Still it failed to complete. Here is that log, for what it is worth:
Starting standard backup
Backing up to: /Volumes/TM-Disk/Backups.backupdb
9.56 GB required (including padding), 911.15 GB available
Waiting for index to be ready (101)
Copied 0 files (0 bytes) from volume Mac HD.
Backup canceled.
To prove a point, I will take these disks are run them on my other Tiger and Snow Leopard laptops to prove TM works fine on those with these disks. But I fear the only options are to either have my tech re-install LION... or just have him reinstall SL instead. Im at wits end.

I am trying to watch Prof. Susskind's video lectures from Stanford univ.U-tube lec work fine.With itunes video and audio have synch problem.Is there a way to fix this or the people who uploaded messed up and it is too late?

I am trying to watch Prof. Susskind's lectures from Stanford Univ. U-tube lectures work fine.With I-tunes, there is a synchronization problem between audio and video. Is there a way to fix this or the people who uploaded messed up and it is too late?

I had thought this situation was solved but it just got worse. In addition to being without service for several days I am now being charged a cancellation fee for a broadband service that BT disconnected in error. BT Vision was also terminated by BT but the set up charges are still in place. Does anyone know who the relevant Ombudsman is? I called BT from America on Friday - for an hour - while someone called Aruj sorted out why there is an order 'in progress' that I didn't initiate; why I have fees relating to a problem created by BT and why there are references to a house move that didn't take place and a BT Vision service I no longer have but didn't cancel myself. He assured me it would be rectified and my bill would be reduced by 139 pounds and we would get confirmation of this later that day. I asked him what chance there was that this would not actually happen - he said no chance at all; my new bill would be 23.50.
There was no text message. An online chat person today told me there had been a fee reduction request which had been declined and there was nothing else he could help me with as he dealt only with broadband. But he would get BT Vision to email me. They always seem so helpful.............
I'm sure I'm listed somewhere as 'a problem', there's no other explanation for why I get the runaround

Working fine with JAVA code and Error Occured while using in JSP

Hi.....
When initiating a BPEL process from JAVA the code is working fine and the Process is getting initiated.But while using that code in J2EE project as a java code and while calling that method Error is occuring.....
Here by i am attaching my JAVA Code which runs as an applicateion and package which runs in Server....
JAVA Code (Run as Application) Working Fine:
package bo;
import com.oracle.bpel.client.Locator;
import com.oracle.bpel.client.NormalizedMessage;
import com.oracle.bpel.client.delivery.IDeliveryService;
import java.util.Map;
import java.util.Properties;
import oracle.xml.parser.v2.XMLElement;
/*import javax.servlet.RequestDispatcher;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest ;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession; */
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
public class processit {
 public static void main(String args[]){
 String input = "TATA";
 String xmlInput= "<ns1:AccessDBBPELProcessRequest xmlns:ns1=\"http://xmlns.oracle.com/AccessDBBPEL\"><ns1:input>"+input+"</ns1:input></ns1:AccessDBBPELProcessRequest>";
 String xml="<ns1:BPELProcess1ProcessRequest xmlns:ns1=\"http://xmlns.oracle.com/BPELProcess1\">";
 xml=xml+"<ns1:input>"+input+"</ns1:input>";
 xml=xml+"</ns1:BPELProcess1ProcessRequest>";
 try{
 Properties props=new Properties();
 props.setProperty("orabpel.platform","ias_10g");
 props.setProperty("java.naming.factory.initial","com.evermind.server.rmi.RMIInitialContextFactory");
 props.setProperty("java.naming.provider.url","opmn:ormi://157.227.132.226:6003:home/orabpel");
 props.setProperty("java.naming.security.principal","oc4jadmin");
 props.setProperty("java.naming.security.credentials","oc4jadmin");
 props.setProperty("dedicated.rmicontext", "true");
 Locator locator = new Locator("default", "bpel", props);
 System.out.println("After creating the locator object......");
 IDeliveryService deliveryService =(IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME);
 System.out.println("Before creating the NormalizedMessage object......");
 NormalizedMessage nm = new NormalizedMessage();
 System.out.println("After creating the NormalizedMessage object.*.*.*...");
 nm.addPart("payload", xml);
 System.out.println("Before creating response object......");
 NormalizedMessage res = deliveryService.request("BPELProcess1", "process", nm);
 System.out.println("After calling the BPELProcess1 .*.*.*...");
 Map payload = res.getPayload();
 System.out.println("BPEL called");
 XMLElement xmlEl=(oracle.xml.parser.v2.XMLElement)payload.get("payload");
 String replyText=xmlEl.getText();
 System.out.println("Reply from BPEL Process>>>>>>>>>>>>> "+replyText);
 catch (Exception e) {
 System.out.println("Exception : "+e);
 e.printStackTrace();
JSP and Java Method Used:
JSP Code:
===============
<%@ page import=" bo.callbpel" %>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>FEATT - I30</title>
</head>
<body>
<%
String input=request.getParameter("dnvalue");
callbpel p=new callbpel();
String Output=p.Initiate(input);
out.print("The Input Given to the BPEL Process is : "+input);
%>
 
<%
out.print("The Reply from BPEL Process is : "+Output);
%>
</body>
</html>
Java Code:
package bo;
import com.oracle.bpel.client.Locator;
import com.oracle.bpel.client.NormalizedMessage;
import com.oracle.bpel.client.delivery.IDeliveryService;
import java.util.Map;
import java.util.Properties;
import oracle.xml.parser.v2.XMLElement;
/*import javax.servlet.RequestDispatcher;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest ;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession; */
//import java.util.*;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
public class callbpel {
 public String Initiate(String value){
 String replyText=null;
 String input = value;
 System.out.println(input);
 String xmlInput= "<ns1:AccessDBBPELProcessRequest xmlns:ns1=\"http://xmlns.oracle.com/AccessDBBPEL\"><ns1:input>"+input+"</ns1:input></ns1:AccessDBBPELProcessRequest>";
 String xml="<ns1:BPELProcess1ProcessRequest xmlns:ns1=\"http://xmlns.oracle.com/BPELProcess1\">";
 xml=xml+"<ns1:input>"+input+"</ns1:input>";
 xml=xml+"</ns1:BPELProcess1ProcessRequest>";
 try{
 Properties props=new Properties();
 props.setProperty("orabpel.platform","ias_10g");
 props.setProperty("java.naming.factory.initial","com.evermind.server.rmi.RMIInitialContextFactory");
 props.setProperty("java.naming.provider.url","opmn:ormi://157.227.132.226:6003:home/orabpel");
 props.setProperty("java.naming.security.principal","oc4jadmin");
 props.setProperty("java.naming.security.credentials","oc4jadmin");
 props.setProperty("dedicated.rmicontext", "true");
 Locator locator = new Locator("default", "bpel", props);
 String uniqueBpelId = com.collaxa.cube.util.GUIDGenerator.generateGUID();
 //System.out.println(uniqueBpelId);
 //java.util.Map msgProps = new HashMap();
 System.out.println("After creating the locator object......");
 IDeliveryService deliveryService =(IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME);
 System.out.println("Before creating the NormalizedMessage object......");
 NormalizedMessage nm = new NormalizedMessage();
 System.out.println("After creating the NormalizedMessage object.*.*.*...");
 //msgProps.put("conversationId",uniqueBpelId);
 //nm.setProperty("conversationId",uniqueBpelId);
 nm.addPart("payload", xml);
 System.out.println("Before creating response object......");
 NormalizedMessage res = deliveryService.request("BPELProcess1", "process", nm);
 System.out.println("After calling the BPELProcess1 .*.*.*...");
 Map payload = res.getPayload();
 System.out.println("BPEL called");
 XMLElement xmlEl=(oracle.xml.parser.v2.XMLElement)payload.get("payload");
 replyText=xmlEl.getText();
 System.out.println("Reply from BPEL Process>>>>>>>>>>>>> "+replyText);
 catch (Exception e) {
 System.out.println("Exception : "+e);
 e.printStackTrace();
 return replyText;
While Creating and Object for the Class callbpel and Whilw Calling that Method
callbpel p=new callbpel();
String Output=p.Initiate(input);
Its throwing an Error:
Error Occured is:
After creating the locator object......
Before creating the NormalizedMessage object......
After creating the NormalizedMessage object.*.*.*...
Before creating response object......
Apr 24, 2008 9:12:00 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.NoClassDefFoundError: javax/ejb/EJBException
 at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:76)
 at com.oracle.bpel.client.delivery.DeliveryService.getDeliveryBean(DeliveryService.java:254)
 at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:83)
 at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:53)
 at bo.callbpel.Initiate(callbpel.java:55)
 at org.apache.jsp.output_jsp._jspService(output_jsp.java:55)
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:331)
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
 at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:874)
 at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
 at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
 at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
 at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
 at java.lang.Thread.run(Unknown Source)
For Running JSP i am Using Eclipse 3.2.0 and apache-tomcat-5.5.25
Please Provide me a Solution......
Thanks in Advance.....
Regards,
Suresh K

A JSP is not the same as a Java application. A Java application has package statment, import statements, try/catch block, a JSP doesn't.

IPhone 5 works fine with incoming calls and audio books but no one can hear me talk.

I have an add-on blue tooth system in my older Prius and it worked perfectly for a couple of years. I can still receive phone calls and listen to audio books through my radio speakers but all of a sudden my callers could no longer hear my voice so I have to switch the phone audio source to iPhone so they can hear me. This happened when I had the iPhone 4 and has continued with the iPhone 5. Any suggestions on how to fix this?

Hi, Did you test to see if after 2 or 3 mins the phone started working correctly? mine does then it will work for a day or 2 on every call then I have to do the same thing again.

Problems creating a Network -- Base Station works fine with Win XP and 7

I just bought the Airport Express and am using it now as a base station and can connect from both my XP and Win 7 based PCs -- can access the internet from anywhere in my home -- wonder of wonders.
I tried setting up a Network but had to go back to the factory settings each time. I basically can leave it at that (no printing from wireless) but that is not a big issue.
What else will I miss by not being able to create a network?
What am I doing wrong?

Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT1296 Is there any way I can transfer the music from my ipod touch to my computer without having to pay for it? Itunes worked fine with my ipod on my old laptop. I am not willing to risk losing all of the music on my ipod to update to the newest iOS.

I really don't want to lose all of the music I have on my ipod touch. It worked fine with my ipod and my old laptop but I got a new laptop and now it doesn't want to sync anything except purchases I made on the ipod and everything that was in the cloud. The rest of the music on my ipod is from old CDs and I am away from home. I would greatly appreciate it if someone could give me some advice. I also don't really want to pay for a download that moves the music into itunes so if anything is free and safe that would be great or if there is a way to do it manually. Again thanks to anyone who has advice to share.

You would have to purchase a 3rd party program ( not supported by Apple).
The ipod is not a storage/backup device.
Copy everything from the old computer or your backup copy of your old computer.

My iPod touch charges but no longer plays music thru docks on a Phillips an onkyo theater systems, both work fine with friends iPhone?

My iPod touch charges but no longer plays thru my Onkyo or Phillips home theater systems. Works fine with friends iPhone and both systems worked fully with this iPod in the past.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Poor OTA reception with Windows 7 Media Center but fine with other software and my TV

I installed a new tuner (ASUS EHD3-100 dual ATSC tuners) into my Inspiron 518 (7 Enterprise, C2Q 2.4GHz, 3GB RAM, 640GB HDD, Radeon 5450 512MB, most recent drivers and updates installed). Tried to set up the tuner in windows 7 media
center and had to add the tuners manually. It found all the stations I was looking for but many had only one red bar for signal strength. If the stars line up correctly I can watch the stations with one red bar but most of the time I get an error
message. I even have one station with all green bars but Media Center still gives me an error when I try to watch that station.
I then decided to use the software that came with my tuner (ARCsoft Total Media). All stations came in with a strong signal.
The signal used in both situations came directly (I unplugged the cable from my TV and plugged it into the tuner) from an antenna in my attic that has been connected to my TV (Pioneer PDP-4280) which shows a signal strength of ~60% plus for all stations.
Pretty sure it's not a signal strength or quality issue because everything works fine with the TV and with Total Media.
Would rather use Media Center because it seems easier to navigate and is easier on the eyes.
Any ideas on how to get the stations with only one red bar of signal strength working in Media Center?

Have you ran the troubleshooter yet?
If you're having trouble setting up your TV signal, try using the Set up TV tuner troubleshooter to automatically find and fix some common problems.
Open the Set up TV tuner troubleshooter by clicking the Start button
and then clicking Control Panel. In the search box, type troubleshooter, and then click
Troubleshooting. In the left pane, click View all, and then click
Set up TV tuner.
Notes
During the setup process, you might be asked to install a program called
PlayReady. PlayReady allows you to play protected, premium TV content from your service provider in Media Center.
If you receive an error while setting up your TV tuner—for example, a download error, or an error during PlayReady installation—you might need to go through the entire setup process again in order for your TV signal to work properly.

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

HT1311 Have changed my Apple id to a new email address. its all working fine on my pc and also comes up with the new id on my icloud page on my iphone, but when i tryto buy something from i tunes on the phone the sign in box still has the old id. how do i

Have changed my apple Id to a new email address. its all working fine on my PC and also on come up with the new ID on my icloud page on my iphone but when i try to buy something from itunes etc on my phone, the log in box still contains the old id.
how do i change this?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
It doesn't sound like you "changed" your Apple ID, sounds like you created a new one. Bad idea. All content bought with an Apple ID is forever tied to that ID. The ID that bought the content is the only ID that can update the content. Apple does not merge IDs not does Apple transfer content from one ID to another.

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

My iPad is set up for my Apple ID account and works fine with iTunes. But when I try to use it for the App Store, my wife's apple ID shows up, not mine.

My iPad2 is set up with my Apple ID and works fine with iTunes. But when I try to use the app store, my wife's apple ID appears in the password window, not mine. How can I get my apple ID to show up?

Sign her out and sign yourself in!

IDVD6 works fine with G4/400 and 10.4.11 ?

Similar Messages

Maybe you are looking for