IDX2 and table IDXEDSAPPL

Hello,
I loaded an Idoc into IDX2 from SAP system. This is a Z Idoc. Subsequently, I did some changes to the segments fields in the Idoc. Initially segment had 28 fileds but I deleted 5. I re-loaded the metadata into IDX2 (delete and created). But table IDXEDSAPPL is not reflecting the correct fields in the swgment. I shows 28, the first 23 are correct and last 5 are from the earlier version of Idoc.
It looks  cache issue to me.. any idea that where the problem lies.
Thanks, Dehra

Hi Dehra.
i think that you can use this report: IDX_RESET_METADATA.
This document may be helpful:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290">How to handle caches in SAP XI 3.0</a>
Hope this help
Francesco

Similar Messages

  • IDX2 and Idoc metadata in production system

    As explained my Michal & SAP note - 767091, I ran program IDX_GET_CONFIG in production, pointed rfc dest to source where the config is located. It loaded the data but the metadata in the tables are pointing to the XI development (DEV) target system port and not production (PRD)landscape....meaning
    XI0 sending data to SAPDEV port
    XC0 sending data to SAPTST port
    XP0 sending Idoc data to SAPPRD port
    Now all my entries in xp0 is pointing to SAPDEV port
    How do I fix this. I don't want to create a SAPPRD port in XI0 and load metadata from SAPPRD into Xi0...its would not be SOX complaint.
    IDoc Adapter: Configuration Data Transfer
           17 Entries for table  IDXSLOAD
            0 Entries for table  IDXIDOCINB
            1 Entries for table  IDXNOALE
            0 Entries for table  IDXQUEUE
            9 Entries for table  IDXPORSM59
          492 Entries for table  IDXIDOCSYN
    Please Help!
         4470 Entries for table  IDXEDSAPPL
          636 Entries for table  IDXEDISDEF

    hi,
    just like I said you need to do it manually
    I gave you note 767091 just to consider
    (the note is for system copy not for DEV-PRD)
    also Naveen told you the same
    you only need to be <b>careful</b> and <b>read</b> what we write
    now just delete IDX1 entries in PRD and create new
    manually - just like we said
    Regards,
    michal

  • How to find how name of view and table using in Discoverer report

    Hi all,
    Please help me, i have requirement, i need name of views and tables used in discoverer reports.
    plz help its urgent.
    regards,
    Vivek Gautam

    As per my knowledge goes, We can see from Administrator which Folder is associated with a Workbook. Else you may have to manually open each and every workbook and look for the objects.

  • Field and Table for Pension Plan

    Can anyone tell me what are the field name and table name in Pension plan

    Hi Harini,
    In Table VBUK you 3 different status related fields for  sales documents.
    Over all status field name GBSTK ( here it gives the total status of praticular sales document) here you see options
    A  Not yet processed      ( This means its complete open)
    B  Partially processed     ( This means the sales doc is partially processed)
    C  Completely processed  ( This means the sales doc is completly processed)
    Delivery status  and over all delivery status field name LFSTK and LFGSK respectively, these 2 fields will be same always ( here it gives the total status of praticular sales document) here you see options
    A  Not yet processed      ( This means its completly  open)
    B  Partially processed     ( This means the delivery doc is partially processed)
    C  Completely processed  ( This means the delivery doc is completly processed)
    So overall status can be  different then delivery or overall delivery status.
    If sales document has 100 quantity for 1 material, if delivery is done for 50 quantity.
    Then over all status field name GBSTK will be B  Partially processed and delivery and overall delivery will be C  Completely processed  .
    Regards
    vK

  • Field and Table for PGI status updation

    Hi All,
    I want to know in which field and table the PGI status will get updated.
    i.e. once we do the PGI for a delivery in which table will this PGI status gets updated.
    Thanks in advance for help.
    Harini

    Hi Harini,
    In Table VBUK you 3 different status related fields for  sales documents.
    Over all status field name GBSTK ( here it gives the total status of praticular sales document) here you see options
    A  Not yet processed      ( This means its complete open)
    B  Partially processed     ( This means the sales doc is partially processed)
    C  Completely processed  ( This means the sales doc is completly processed)
    Delivery status  and over all delivery status field name LFSTK and LFGSK respectively, these 2 fields will be same always ( here it gives the total status of praticular sales document) here you see options
    A  Not yet processed      ( This means its completly  open)
    B  Partially processed     ( This means the delivery doc is partially processed)
    C  Completely processed  ( This means the delivery doc is completly processed)
    So overall status can be  different then delivery or overall delivery status.
    If sales document has 100 quantity for 1 material, if delivery is done for 50 quantity.
    Then over all status field name GBSTK will be B  Partially processed and delivery and overall delivery will be C  Completely processed  .
    Regards
    vK

  • Field  and Table name for purchaser

    I want to know the field and table name for purchaser id and purchaser name.
    Plz help me.

    Dear
    Purchaser name are define in Header level data in Purchase Order EKKO & Purchase ID define as a Purchasing Group
    Purchser Name EKKO-ERNAM
    Purchase I D  EKKO-EKGRP
    Regards
    Aamir

  • Field name and table

    Dear Friends ,
    I want to display discount , P&F , excise , tax , fright , octori , insurance  so what is the fiels name for all fields and table name .

    You have to create the report bu fetching the report from the table EKPO - Doc condition no KNUMV. Use this no in the table KONV to get all your requirements aginst the field KSCHL - Condition types.

  • Field NAme and Table Name

    Hi All,
    I got some output values from the legacy system with me but need to know whats the actual field name and table name to which i need to transfer these values. How can i do it, since which theres is not field name or despcription given for the data.
    Is there any way i can do it.
    Points will be rewarded for all useful answers.
    Regards
    AB

    if you know the transaction code you use to post the uploaded data in SAP, you just need to do BDC recording in using transation SM35. Record the whole process and create a program from the recording... and you wont even need to know the tables and field names-- almost everything will be done for you....
    All you need to do is replace record data with upload data.
    You can also try to look for a standard Function Module / BAPI which can do the processing for you and provide it with a table containing the upload data ...
    Reward points if useful

  • Where can i get   SALES  ORGANIZATION    FIELD and TABLE

    Can anybody tell me   where can i get   FIELD  and   TABLE  Name   OF  " sales organization    "

    Dear Sandeep,
    u will find VKORG is the Sales Organisation .
    u will find this Field in every related SD Module Table...
    Like ...VBAP,BKPF ..etc..
    Hope it helps...!!!
    Pls reward if Helpful...!!!

  • Storage Location Wise Stock Value field and Table

    Hi ,
    Please let me know the storage location wise stock value field and table.
    Regards
    Suresh

    Hi Suresh,
    As per my understanding it is not possible in a single Table.
    If this is required for customized Z report then use this logic it may gives the correct information.
    In the combination of MARD and MBEW.. From MBEW you can get the value for each Base Unit of Measure then multiply that value with storage location stock.
    It may usefull to u..in the mean time i will try for some other option.
    Please revert if u have any query.
    Regards
    Durga Sana

  • MIGO tr Serial number field and table?

    Hi guys,
                  can anybody tell me how to find the field name and table for Serial number in MIGO tr Code?
                     in MIGO the Serial number field and Structure are GOSERIAL-SERIALNO.but i was not able to find the Actucal Field name and table where i can get the values based on PO and Asset Number's?
    Thanks,
    Gopi.

    Hello,
    I'm looking at the same problem here. I found the table SER03 in which you can enter the the material document. This returns 1 line in this table and from this one you need the OBKNR element
    You can copy this data and paste it into table OBJK element OBKNR and this returns all serialnumbers for the relevant material document.
    My problem is that i can't get these items on the sapscript. (WESCHEINVERS 1,2 or 3)
    Greetings
    Edited by: Lode Vandecruys on Apr 9, 2008 11:04 AM
    Edited by: Lode Vandecruys on Apr 9, 2008 11:09 AM

  • Purchase Order released date field and table name

    Hi,
    Please tell me the  Purchase Order released date field and table name.
    Regards
    Deepak

    Hi,
    Table : EKKO.
    Fields : FRGKE,FRGZU.
    You can get release date of PO from CDHDR  table.
    give object value as your po number and check.dont forget to give leading zeros.
    The udate will be date field and transaction will be me29n for relaesed po.

  • How to add a field and table control to BP transaction.

    Hi,
    I have a requirement to add a field and table control to the 'Control data' tab of the Transaction BP.
    Can some on please help me if having a solution and with any relavant documents.
    Thanks in advance.
    Raj & Khader.

    Also explore with EEWB tcode.
    Refer this threads
    Re: EEWB
    Created New fields in Business Activity with EEWB
    Cheers
    Manohar

  • Cost Component structure field and table names

    Hey all,
    i need to code a BADI to push value of one column in cost component structure to another column in ccs for only order settlements..
    any idea how to do this??
    i am very new to abap please take it easy on ur answer..
    i coulndt even find in which table and fields these values are stored...
    thank you

    I have an OSS note, it tells you step by step how to config the badi u need.. but does not mention about the logic u ll use.. it is up to you....
    so i need to find the field names and tell take these and post them to these columns...
    i dont know if i make any sence, but this is all i need to do...
    so i have the body i have the logic but i dunno the import and export fields...
    i believe the table is ckmlkeph.... and field that populate the columns are kst0XX, but i cannot see the field name and table name if i select a line in the column and F1 ????

  • What is the field and table name to describe -Employee Hourly Rate or Emplo

    Hi,
    Can any one please tell me what is the field and table name to describe 
    Employee Hourly Rate or Employee Rate.
    Thanks for ur time.
    Murali.

    Hi Murali,
    The hourly rate is tied to a Wagetype & maintained in Infotype 0008. The database table is PA0008.
    the field could vary depending on the No of wagetypes maintained.
    regards,
    Suresh Datti

Maybe you are looking for

  • What is the best way to extend a Wireless network?

    Hi, We have 3 devices, 1) Our Primary Network Router (which creates our office Network and has DHCP enabled). 2) We have and Airport Extreme, which is used to create our Wireless Network (THIS IS SET TO "Create Wireless Network"), it has DHCP Enabled

  • XI Acknowledgement Questions

    Before I ask my questions, please note I do have a copy of the "How To Handle Acknowledgements for IDoc" How To Guide. I just need some clarification from the group. Here are my questions: 1. XI will not send a positve acknowledgement/status to let t

  • Premiere Pro 5.5 Crashes on Startup

    Hi There, I hope you are all well. I have a small problem. When i open Premiere Pro 5.5 on my PC it crashes on startup. What happens is that when i click on the shortcut, the logo comes as normal and the plug ins etc seem to load. The where it would

  • Silent Install for Elements v.2

    I work in a school environment and have an (old) site license for Photo Elements version 2. I want to deploy the program to specific computers and not have it included in my school image. Therefore, I need either directions to do this or a link to an

  • Unable to add or remove iView to role in user interface

    Hi, from last fews days, i am having problem with creation and deletion of ivIews on portal. I created one iView and added it to the role which already had some iViews before... But the new iView i had added is not shown to user.. it shows me in cont