IDX2 Metadata Error Message no.000 File to Idoc senario

Hello Experts,
I am trying to load metadata in IDX2 manually. But it fails and comes out with message Message no.000
I have crossed checked my RFC Destination (SM59) the connection test is successful. The port on IDX1 is created
Similarly the RFC Destination on CRM system is created too. Why is it that my metadata load is giving this message?
Also I created and end to end scenario in XI system for File to Idoc. The file is scheduled in queue for process. The receiver determination has hot started in pipe line process.
To check these when i went to idx2 there is not metadata. hence i tried to load the meta data ... am i searching in right direction?

Yet again like the post in this thread
IDX2 Meta data import fails. I::000 error.
I have been stupid not to check the user on R/3 i spelled the user wrong
Thanks for your support guys

Similar Messages

  • IDX2 Metadata Create Error Message l.000 File to Idoc senario

    Dear All,
           I got the error l:000 while creating meta data.I read all threads related to this error,but couldn't solve this.I have assigned roles SAP_XI_APPL_SERV_USER,SAP_XI_IS_SERV_USER on xi system,and tried to assign Profiles: SAP_ALL and SAP_NEW.but i couldn't see those profiles.
    any help would be appreciated.Thanks in advance.
    Regards
    Vinay

    Hi Vinay,
    Please check whether you have created the IDX1 port correctly. It should use the sm59 destination pointing to the SAP Backend system (ECC/CRM). The user access to be used needs to be tested for authorizations. (Do as mentioned above)
    Also remember, even if the metadata is not cached in IDX2, the interface should work if the user authorizations are correctly maintained in sm59 destinations and that is referred to in IDX1.
    Once the first run is successful, the metadata is automatically cached in PI system (ABAP stack) in IDX2.
    Regards,
    Souvik

  • I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    Leslie Tanaka
    Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
    Let us go back over that Adobe document regarding troubleshooting damaged projects.
    3. Delete the Application Preferences
    Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
    7. Test to see if individual media files are causing the problem.
    That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
    I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
    I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
    Please review and consider.
    Thank you.
    ATR

  • My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

    My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • After editing a photo, I sometimes get an error message that the "File is empty".  Can revert to original and start again, but file disappears after editing.

    So frustrating!  I open the photo.  Edit by cropping, adjusting color, etc.  It's perfect.  I click DONE and move on to the next.  When I come back, the first photo is gone.  I can see it in the album but cannot open it.  When I look at the file information, it shows zero KB.  If I move it to the desktop and try to open it, the error message says the file is empty.  I can revert to original and there it is.  Edit again, and again it disappears.  What am I doing wrong?  I am using iPhoto 09

    You shooting with a Nikon? We've seen a few examples of this bug with Nikons on 09 and 10.6, with no solution except to upgrade.
    Regards
    TD

  • I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...."  How do I fix this?

    I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel."
    How do I fix this?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Error message "cannot locate file"

    I purchased a new computer and used Detto Intelli Mover to transfer all my music files. When I opened the library, they all appeared to be there, but when I try to plan anything I get an error message "cannot locate file" This happens with all of my 1,200 songs. The error message also says "would you like to look", but I am unable to locate then. Can anyone help with this?

    Have you added all the songs to the library? Just by dragging and dropping?

  • Error message c:\program files (x86)\itunes\ituneshelper.exe   r6034

    can not log into itunes, get the following error message:  c:\program files (x86)\itunes\itunes help.exe
    R6034
    I have uninstalled and reinstalled and still unable to login

    Apple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
    If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
    If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
    For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
    MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
    tt2

  • Installed iTunes 64 on Windows 7 (home) HP and received this error message.  The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes.  Please help.

    I installed iTunes 64 on a Windows 7 (Home) HP Pavilion and received this error message.  the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes.  Please help! 

    The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • After years of using iTunes on my G4 suddenly it won't open.  Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes".  What do I do?s

    After years of using iTunes on my G4 suddenly it won't open.  Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes".  What do I do?  I have been attempting to move my Library to a newer MacBook Pro.

    The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • Updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

    updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

    hello!
    i have a similiar problem:
    i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
    its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
    or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
    thanks, florian

  • Download error message - "Cannot Create File"

    Recently I developed a problem and am unable to download anything (files, software, etc) from any website. I begin a download, the download manager comes up and it shows an error message "Cannot Create File." I am using the default manager that is incorporated in OS X 10.3.9.
    I never had a problem until a week or so ago when I downloaded a software demo. I decided to get the full software package and trashed the demo files per the company's instructions. I got the error message when I tried to download the full program and now get the message no matter what I attempt to download. Might I have trashed a file I wasn't supposed to trash?
    I tried installing 10.3.9 again on my main drive but still have the problem. If I use an external hard drive with spare copy of 10.3.9 and make that my start up drive, I can download files successfully.
    Any help would be greatly appreciated.
    Dave
    2002 DP 1GH Quicksilver   Mac OS X (10.3.9)  

    Recently I developed a problem and am unable to
    download anything (files, software, etc) from any
    website. I begin a download, the download manager
    comes up and it shows an error message "Cannot Create
    File." I am using the default manager that is
    incorporated in OS X 10.3.9.
    I never had a problem until a week or so ago when I
    downloaded a software demo. I decided to get the full
    software package and trashed the demo files per the
    company's instructions. I got the error message when
    I tried to download the full program and now get the
    message no matter what I attempt to download. Might I
    have trashed a file I wasn't supposed to trash?
    I tried installing 10.3.9 again on my main drive but
    still have the problem. If I use an external hard
    drive with spare copy of 10.3.9 and make that my
    start up drive, I can download files successfully.
    Any help would be greatly appreciated.
    Dave
    2002 DP 1GH
    Quicksilver   Mac OS X (10.3.9)  
    I have the same problem ! Not being able to download a file from the Adobe site. I need Reader 7 to download some files from exact exams but can't do it. Just keep getting the Cannot Creat File message in the download window. Can anyone help?
    eMac 1.25 & G4 800 iBook   Mac OS X (10.4.5)  
    eMac 1.25 & G4 800 iBook   Mac OS X (10.4.5)  

  • Adobe Acrobat gives an error message "The key file is missing, canceled"

    Hi,
    Adobe Acrobat gives an error message "The key file is missing, canceled" this is a direct translation of the Finnish error message. Acrobat is already re-installed. The operating system is Windows Server 2008 R2, and there is also installed Adobe Reader X.
    BR
    Heikki

    Please let us know do you see this error on every launch of Acrobat?
    Recommended is to have latest version of Acrobat and Reader. i.e. 10.1.8
    Try updating application and then see if you still encounter the error.

  • I keep getting the error message "Missing PDFMaker files. Do you want to run the installer in repair mode"

    I keep getting the error message "Missing PDFMaker files  Do you want to run the installer in repair mode"when I try to convert a file into a pdf.  I have tried uninstalling then reinstalling but I continue to get the message.  I am able directly print file, but there are some errors in the pages, but some of them have font errors. Please advise.

    Hey Suzanne,
    Could you please let me know what Acrobat version are you using and what kind of file are you trying to convert to PDF.
    If you are using an MS Office application, then PDF Maker has to be an active plug-in for the PDF conversion.
    Have you tried using Print to PDF option from the File menu for the same?
    Please check and then let me know.
    Regards,
    Anubha

  • HT1848 I cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please hel

    cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please help me

    Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
    iTunes: Missing folder or incorrect permissions may prevent authorization

Maybe you are looking for

  • How do you convert PC-ripped DVDs using a Mac?

    Got a question about converting/burning video DVDs from PC to Mac. So I acquired a rip of a Video DVD, which seems to be PC-made, as the original rip was made up of numerous RAR files (pls-amipys.r00, pls-amipys.r01, etc). I used a program (UnRarX I

  • SOAP Envelope - HTTP_EXCEPTION - HTTP 500 Internal Server Error

    Pessoal, o cliente em que estou utiliza uma solução para NFe que não é o GRC. Para tentar solucionar o problema do SOAP 1.2 e do message header, estou tentando criar o SOAP Envelope utilizando um XSLT, e no Communication Channel eu estou flegando Do

  • Exception Description: No conversion value provided for the attribute

    Hi!, The following is printed when I try to persist an entity with a an enum attribute in it. It deployted succuessfully and mapped fine a table, my configuration is, Windows2003, SJSAS 9 FCS, Derby DB. Exception [TOPLINK-115] (Oracle TopLink Essenti

  • Help with mouseclicked on a button

    I have the following situation. I have a JPanel, with two buttons, and a text field. The first button runs a method that returns an integer which gets printed in the text field. Sometime this method works too long, so I want a second button to stop i

  • Have I won???

    Hi, I recently entered the Marvel Age of Ultron competition. About a month ago I saw an advert for Skype Age of Ultron tickets and I entered by typing in 'marvelavengersuk'. I got this message from them:  "Thanks for entering for the chance to win ti