IDX5 - System is not a central XI; cannot start program

hi all -
Did anyone come across this error message - "System is not a central XI; cannot start program" when trying to execute the tcode - IDX5 on the XI box?
I pushed an IDOC - MATMAS05 from IDOC to XI. It doesn't come into XI.
1. I checked the SM58 on the R/3 side. No Messages.
2. I checked the IDX5 transaction on the XI side, that's when i get the above error message.
3. I checked the IDX2 transaction on the XI side, i get this error "I:000" - Anyone knows what it means?
4. SXMB_MONI doesn't show up anything.
5. R/3 - pushed idocs shows a status of 3.
Any ideas where to look for and how to solve the problem -IDX5 and IDX2.
Environment:
1. We are using SAP NW 2004s
2. SAP BASIS Component - SAP_BASIS - Release 7.00
Thanks in advance,
Tirumal

Hi,
I think port configuration in IDX1 may be not correct,
Anyway check out this SAP note- 940313
Also refer this analysis:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
Moorthy

Similar Messages

  • Reg:"System is not a central XI;cannot start program" Err

    Hi..
    I am trying to execute the transaction IDX5 on XI system and am getting the err "System is not a central XI;cannot start program".Can anyone please tell me the reason for this?

    Are you sure that you are executing TCODE on XI Server.
    Normally this message is displayed for R3 Servers
    Check SXMB_ADM --> Check the Integration Engine Configuration
    In the Global Configuration Data :
    Role of Business System should be Integration server
    Corresponding IS  should point to Pipeline URL
    regards
    Gangaprasad
    Edited by: gangaprasad chintala on Nov 18, 2008 3:26 PM

  • The temporary file path is not valid.  Lightroom cannot start

    Windows XP, SP3, Lightroom 2.5.
    External hard drive starts acting funny.  Round here we expect hard drive failure, so I order a new drive and when it arrives copy the backup onto the new drive.  The new drive has the same drive letter as the old one, but not the same name.  When I try to open a catalog I get: "The temporary file path is not valid.  Lightroom cannot start."  The catalogs seem to be fine, as when I open lightroom directly, not by clicking the .lrcat file, catalogs look normal.  If I copy the lrcat file to my internal hard drive it opens.  If I create a new catalog on the external drive I get the same problem.
    I have tried deleting the preferences file.  I have tried deleteing and reinstalling lightroom.  I have used the external HD on another computer with lightroom and it opens normally.
    All I can imagine is that there is some setting, somewhere in the registry which does not get erased when the lightroom gets re-installed.  Any guesses?
    I am at a loss!  Please hope me!

    Could be your Windows tempfile path is messed up. You could try going to Control Panel/Advanced and pushing the Environment Variables button.See what the TEMP and TMP variables are set to.
    Under "User Variables", both of mine are set to C:\Documents and Settings\<my name>\Local Settings\Temp.
    Under "System Variables", both are set to C:\Windows\Temp.
    Make sure that the directories referred to are legal and on accessible drives. Make sure they aren't read-only. It wouldn't hurt to create them if they don't exist.
    It's worth a try, I think.
    Hal

  • I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

    I need help with deactivation.
    I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

    if you're using the same computer hardware to reinstall your cs3, you don't need to deactivate first.
    but if there's a significant hardware change you can ask adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

  • The system could not calculate the fiscal year start or finish date message

    While running the transaction FMO1 and FMOA in funds management we have confronted with the following problem.
    Message no. FI 500
    The system could not calculate the fiscal year start or finish date.
    WE are using year dependent fiscal year and are implementing Funds Management for the first time.
    SAP Version – 4.0 B
    Priority – Urgent
    For the same problem in Version 4.5 and 4.6 there is a note number 213713 available on service.sap.com.

    No, there is no bug.
    Those activities that have asterisks (Stars) next to their start or finish dates (despite having no constraints) have "External Early Start" or "External Late Finish" dates, respectively, assigned to them. These dates get imported with XER and represent links to activities of those projects that are not in your database but in the external database where the XER originated from.
    To remove, filter out all such activities (with stars) and delete their "External" dates. However, be aware that Start or Finish dates of such activities might change if you delete theire External dates. If getting rid of asterisks does alter your schedule, ask the person who sent you the XER to confirm start/finish dates of all such (starred) activiites.
    Cheers

  • Cannot start program

    I removed all earlier versions of Firefox (which I love!) and get this message after I reinstalled the latest version: "Application failed to start because app configuration is incorrect. Reinstalling the app may fix the problem." Well, reinstalling does not work. I cannot use Firefox because it won't install on my Windows XP system. Earlier versions used to work,now I cannot install. Please help!

    I tried to install this PKGBUILD but it won't install because my system is 64 bit!
    I also tried to install Virtualbox.
    This works but this gives new problems :
    - USB-warnings (even though I put the extra file in my fstab)
    - no VTx-support (even thoug my CPU supports it and it is not disabled in bios)
    - Linux mint 32 bit crashes during install in virtualbox
    - virtual-box additions don't want to install.
    I think I will give up making a photobook for my wife!

  • "Temporary file path is not valid. Lightroom cannot start." On a Mac?

    Last night LR2.0 shut down on me and now this is the error message I am receiving. I am on a MacBook Pro, OSX 10.4.11. I'd love some assistance on this, as I am in the middle of several projects.

    Did the odd little trick work??- And the key is that LR has to be shut down; there
    b should be a *.lock file when LR is running.
    Prefs- Your preferences file- doubt that there's any problem with it as you seem to have not used a lot of different versions. It keeps track of all catalogs' locations, but can't do so when catalog is moved in Finder. [It does a bunch of other things, too....]

  • Cannot start programs Ink Crossword and Ink Desktop on Portege M400

    Hi,
    I have just purchased Portege M400 with XP tablet on it.
    I updated it with SP3 and all relevnt MS updates.
    I have tried to use the Ink Crossword and Ink desktop and they do not start at all.
    If I try "Explore the experience pack" then the option screen comes up but when you click start the above programs you hear the click but nothing happens.
    Interestingly snipping tool 2 does work!
    I have downloaded the pack from MS and reinstalled it but still no good.
    Any ideas anyone??
    Thanks

    Hmm did you install the Microsoft .NET Framework 1.1 on your system???
    Microsoft recommends these minimum system requirements for Microsoft Experience Pack for Tablet PC 2005:
    Windows XP for Tablet PC Edition 2005, English language
    Microsoft .NET Framework 1.1
    Windows Media Player 10 (required for Media Transfer)
    At least 50 MB of available free space on your hard disk
    Maybe you should also check some details and further info on this MS page:
    http://www.microsoft.com/windowsxp/downloads/tabletpc/experiencepack/default.mspx

  • Cannot start Programs Like Firefox Freezes and Beach ball spining

    I dont know what happen yesterday firefox just crashed and when I tried to restart it it just bounces for a long time then freezes even yahoo im all the imers and then even when i go to disk utilites it freezes can some one please help me..

    When you get your OS X disks from Apple, I would run the Apple hardware test first, to ensure you don't have an obvious hardware problem.
    If you download OnyX, which is a good utility, you want to run the tasks on both the cleaning and maintenance tabs.
    To provide additional help, you'll need to tell us more about your system, for example, which Powerbook you have, the amount of memory, the size of your hard drive, how much free space you have on the hard drive, what operating system you have on your machine, and what, if any, peripherals you have plugged into it. The System Profiler on your hard drive in applications/utilities can help provide this information.

  • Cannot start visual studio 3013

    I downloaded visual studio 2013. Two years ago I used an old user id. I don't have the password. I cannot get rid of it. It suggests to use a 'change user id'. Where is that?
    Why will this not work. I cannot start visual studio.
    User Id

    Hello,
    If that account is not associated with your Visual Studio and you just want to register Visual Studio with your account.
    Please create a new User ID then register Visual Studio. Here is the
    MS account page
    If you are licensed user and your account has a paid version of Visual Studio, please
     call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist, and you can get more detail information from there. You can also visit the following site for more information
    and support on licensing issues:
    http://www.microsoft.com/licensing/mplahome.mspx.
    You will need to ask how to reset your account and then reset your password. After that, you can use VS again.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cannot start transaction SMEN

    Hi ,
       When we try to execute any transaction after loggging in to our system we are getting a message "    Cannot start transaction SMEN".Any idea to what may be wrong .Please help.
    Max

    This is normal. SMEN cannot be started by giving transaction code in CMD field. When you execute it you will a pop up with message. There is question mark icon in the pop up which explains the same. Only if you check it !!
    Regards.
    Ruchit.

  • "System is not a child system in central user maintenance network" problem

    Hi ppl,
    I have added one new role for a user id. After that, I log on using that user id. However the message "System is not a child system in central user maintenance network" appeared. What has happened and how to solve the problem? Thank you.

    This error message occurs when a user tries to logon to the CUA master system <u>and</u> when his account is <u>not</u> assigned to this logical system (see SU01: tab "systems", displayed only in the CUA master system).
    You need to define the CUA master system also as CUA client system and assign that system to the user master record; otherwise the user cannot logon to the CUA master system.
    Regards, Wolfgang

  • HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

    I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
    I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
    I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
    Thanks,
    Toks

    Hi Toksyb!
    You may want to try clearing out the PRAM on your computer. This process is explained through this article:
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

    I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

    Niel...
    I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
    thank you for your time and help,
    Dennis

  • Cannot complete download.  System has not been modified.

    I cannot complete a download.  I receive a message that "my system has not been modified".  What do I do now?

    Make sure you have cookies enabled and clear your cache.  If it continues to fail try using a different browser.

Maybe you are looking for