IE 10 Google Maps Printing Issue

Just upgraded to IE11 and that fixed it. I'll have to get with my CIO and advise him that we'll probably have to update the servers to that so it can work wit Google Maps (which is what all of our drivers use). Thanks!

Good morning. We're having an issue with IE 10 "squishing" or compacting Google Maps when printing them out. Using Chrome it works fine. Already unchecked "Shrink to Fit" and ensured that Compatibility View was turned Off for google.com and maps.google.com. Having a hard time finding anything else online about this issue past those two suggestions. Screenshots attached. 1st one is IE Print Preview and 2nd one is Chrome Print Preview
This topic first appeared in the Spiceworks Community

Similar Messages

Sluggish at initial opening and loading websites, google maps print and images not working right, problems are not present in Chrome and Safari

Firefox is very slow opening. Web pages load slowly. When I go to images in a Google search, the pictures take a long time to load, and when I click on an image, then the back arrow, the loading time for the previous page is very slow. When I print a Google map, it is small, rather than full-page. In Google Chrome or Safari, the same actions product immediate results. I cannot get Google desktop to work.

This sounds like a network problem, since it goes away when you connect through a different network. You'll need to talk to your university's IT department about this.

Why can't I print out google maps on my hp photosmart premium c410?

I'm set up wireless and it works good except when I try to print out a map from google maps and sometimes from yahoo maps. Can someone help with this? I also have a hp 1350 all in one I have to usb plug in when printing from google maps. I'm running win7 64bit home premium.

What happens when you print from those map programs? Does it fail to print or is the size incorrect?
If it is a size/formatting issue, then this document may help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=buu01105&cc=us&dlc=en&lc=en
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

HP Officejet 4500 Wireless Printing Issues with Online Maps & Financial Institutions

I have an HP Officejet 4500 Wireless printer that I have wireless connection to my HP G72 Laptop running Windows 7 (64 bit) with Internet Explorer 9. I am having trouble printing online maps from either Bing Maps or Google Maps. It seems the print jobs get stuck in the print que and always show an indefinite status of “Printing” in the que but never get printed.
I’ve tested my other applications including Office 2010 and all other jobs seem to print just fine. I do use the “Print” button located in each of the online Map sites (Bing, Google). This is when the jobs get stuck.
I do also have the HP Bing Bar installed with Smart Print. The Smart Print feature seems to work with the online maps just fine (seems I’ll just use it instead).
Another separate printing issue is that I can never get any of my online financial transactions to print from any of my online financial institutions with either the Internet 9 print features or the HP Bing Smart Print feature. I can never get those to print (have to wait for the PDF statements to be available).
Any ideas as to why I can print the maps or online financial transaction? I get no error messages either.

Hi,
Please use the following tips/instructions to fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to print Google maps

Hi,
Until a few days ago, I could print out a Google map with the print command in Safari (2.0.4.), move the map to zoom in on a particular intersection and print that page as well. It all worked fine. Computer Is Power Mac G4, HP 4000 laser printer.
Today, I no longer can print a google map using the print command in Safari (2.0.4) or "print" in preview. Text directions print out, but no map is printed just a blank page.
Note: I am able to print a map using the print command on the Google page, but the map consists of 3 small boxes (overview, start, and end). I can't print out a zoomed-in area.
I emptied the cache, cleared history, and I have not reset Safari.
Any suggestions as to why and what to do would be appreciated. Thanks
Richard
Mac OS X (10.4.7) Power Mac G4

Google wrote and said they changed their output format for printing. So, not a Safari issue.

Google Map Issue in OBIEE - Subject area not getting associated

Hi Gurus,
We are trying to integrate Google map and OBIEE via mapviewer. We have done the following already -
1. Loaded World Sample data from Navteq.
2. Configured mapviewer source and added Google map as a tile layer with the API KEY.
3. Imported one layer (e.g. M_STATES_ABRV) in OBIEE and linked it with BI subject area (tried this step with importing other layers as well)
4. Added background map.
Now , in this step when we add the layer in the map, we select M_STATES_ABRV and change zoom levels. But Once we come back to main screen after Clicking OK, we see the background map is not associated with the subject area. Hence any map view report creation with this subject area fails.
We have the tried the same theme with Oracle Maps (internal type like WORLD MAP or DEMO MAP), it works fine. only Google Map gives this issue.
This was not expected. Please suggest what we missed. We tried with cache clear, tile delete and recreation, service restart almost everything .
We looked into other threads in this community, different oracle support documents - Doc ID 1485088.1,Doc ID 1346805.1 etc and in different internet blogs - where it's easy as child's play, but we are still out of luck.
OBIEE version - 11.1.1.7.140527
Environment- windows server 2008 R2
Please suggest.
Regards,
Krish

I have found the solution: You need to *select* zoom levels for the BI Layer. When a BI Layer is added to a background map, by default no zoom layers are selected. Once a zoom level is selected, the BI Layer will save.

Script error message when printing google maps driving direction into PDF

My system; Win 7/ 64bits/IE 9 both 32 and 64 bits/Adobe Acrobats 10.1.1. Pro
Intial problems in printing web sites into PDF files has been resolved when I upgraded into 10.0.1 after having installed IE9.
However, with 10.1.1. version, I noticed that when I tried to convert google maps results for a driving direction (From A to B), script error message showed up and I could not convert it into PDF. I tried both IE 9 32bits and 64 bits version, but both failed to do it. Please fix the problem for the next updates.
Thanks

You might try running CHKDSK on the disk to where you try to save the file. You might have a corrupted file directory or a damaged track on that disk. I urge you to backup what you can before trying this.
Ken F.

Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?

Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?
It has been quite a while since Apple came up with Map App of their own and should be releasing improved maps with more capabilities in India.
Cheers!
Abhishek

No one here can answer your question, as there is no one from Apple here, & no one here represents Apple or speaks for Apple.

Issue in Develop mode for embedding google map

Hello,
I am facing an interesting issue in Develop mode for embedding google map html code (screenshot is attached)
The map rectangle showing almost same size box underneath filled in black, while in preview mode, it is working properly. I could not find the reason, where I am doing something wrong.
Many thanks .

Hi Muzeone,
Its a default behavior with every WYSIWYG HTML Designer or editor,
Reason :The black box which is appearing in the design view is because you might have tried increasing the size of the iframe thumbnail.
If you are using Iframe and using Insert HTML feature in MUSE, make sure when you paste the iframe code in MUSE, it creates a thumbnail in design view do not resize it in design view.
Size does not change the height and width of Iframe in MUSE as its being controlled by the codes that you are inserting.
The design view will only show you iframe height which is defined in the codes below that it will show a black box.
Enjoy working with MUSE !!
Thanks
Prabhakar Kumar

Can't print Google Maps embedded in iWeb 08 pages

I have created a web page using iWeb 08; the page has several Google maps embedded. I realize that the Google maps are interactive but I can't find a way to print the web page showing the Google maps. When I print, I get blank space where the maps are. I've tried printing from Safari, iWeb and via PDF but none of these methods print the map as shown on the screen. Is there a way to do this?
Thanks for any help.
James

You cannot.
It's the way Apple embeds the map in the page.
Solution: Go to Google Maps, find your location, copy the HTML Embed code and paste it with the HTML Snippet.
Next problem: When printing the page, I see scroll bars on the printed page.
Problems, problems problems, will it ever stop.
[Send a feedback|http://www.apple.com/feedback/iweb.html]

Google maps in jquery tabs issue

Can't get the map to zoom in, with one of the Business Catalyst templates, see: http://winedineoxnard.businesscatalyst.com/visit/magnavino-cellars
The jquery tabs are causing this, but I can't figure out how to fix the issue.
Any help would be appriciated.

This is not a specific issue in related to BC, it is associated to map rendering when in tabbed content controlled by jQuery:
http://stackoverflow.com/questions/9458215/google-maps-not-working-in-jquery-tabs
You can google if it is spcecific to say bootstrap tabs or something else for other sollutions.

Google maps issue in obiee

Hi
I am trying to integrate google maps in obiee. I have generated API key using my local url(http://owner-pc:9704/) from code.google.com and using it.
My issue is when i generate a report in the narrative section, its only displaying a blank image saying
" retriving results..please wait" ....................but doesnt display anything
I am following the same example provided in this article
http://www.artofbi.com/index.php/2009/07/obiee-and-google-maps-integration/
Appreciate your response
Thanks

I think there are some bugs in the Google recent updates. I am on GB on Xperia ray and yet i have Play store always running (sneakily) in the background (takes up7-9MB ram) and usually there is one Google map running (i dont know why, i hate that) and i have seen up to 3 maps running sometimes consuming 15-20MB ram!
I think the bottomline for all companies (Sony,google) is to test out the software thoroughly and not be hasty in just sending updates (which are pointless). In this aspect i have alot of respect for Apple.

Can I restore the prior File print command functionality for Google maps?

Printing Google Maps, recently the file command on Firefox only prints the map and not the directions also. The map and directions both used to print. I am aware that there is the print link near the map, this prints a much larger map and causes trouble with our ISA server. This link requires full access to the Google.com site. We have restricted access to the maps.google.com for employee productivy reasons. My question is can I restore the prior printing functionality? The printing works fine with I.E.

It's either that or finding other software for your scanning needs. For example, Image Capture comes with OS X, VueScan 9.2.09, ExactScan Pro 2.24.
Alternatively, partition your hard drive and install Snow Leopard on another volume.
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive. Use the Snow Leopard installer DVD to install Snow Leopard on your new volume.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

Disabling hardware acceleration resolved issue with Google Maps not loading in Firefox 19

For the last few days noticed that I could no longer use Googlemaps in Firefox 19. The page would completely load then if I typed a single character into the search box for google maps it would bring up the "Still loading" text and do nothing.
Followed a couple links on the Mozilla support page and started Firefox in safemode. Maps was speedy and worked fine in safemode. I started again without safemode and tried the simplest step to see if it would resolve the issue and disabled hardware acceleration. All of a sudden maps worked again. The strange part is when I re-enabled hardware acceleration maps continued to work (go figure, makes no sense to me).
Just wanted to post my experience for others who may be having a similar problem.
System is Windows XP 32bit
Cheers.

Thanks for posting your solution. For other users who may find this thread and need more information, see:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] ... under '''Turn off hardware acceleration'''.

While printing google map from FF4 its not displaying the map in the print out paper?

FF4 displaying the google map in my website. But while printing google map from FF4 its not displaying the map in the print out paper.
I chekced this FF 3.6 and there is no problem with this and other versions. FF4 having this problem.
What should I do for this? Please let me know.

What printer models is this intended for? I assume it is aimed at the lower end inkjets, with the suggestion of loading 10-25 sheets of paper.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

IE 10 Google Maps Printing Issue

Similar Messages

Maybe you are looking for