IE 11 Compatibilty Mode

If I turn on compatibility mode in IE 11, what version of internet explorer does it emulate?
Ray Pietrzak

Hi,
In addition, you can check the Structure of the Compatibility View List in this article. Please know that for recent versions of Internet Explorer, the Compatibility View list is an XML file maintained by Microsoft. The Compatibility View
List is based on feedback collected during the development of Internet Explorer.
And which version of IE it uses to emulate is defined in the compatibility list.
See "The Structure of the Compatibility View List " in Understanding the Compatibility View List
http://msdn.microsoft.com/en-us/library/gg699485(v=vs.85).aspx
<domain>adatum.com</domain>
<domain docMode="EmulateIE7">fabrikam.com</domain>
<domain docMode="EmulateIE8">fourthcoffee.com</domain>
<domain featureSwitch="createElementWithMarkup:false">northwindtraders.com</domain>
<domain docMode="EmulateIE8" versionVector="8" uaString="8">woodgrovebank.com</domain>
Kate Li
TechNet Community Support

Similar Messages

  • Compatibilty mode for itunes in windows vista

    when i start itunes a get a message saying itunes compatibilty mode is set for an earlier version of windows. i went to itunes application hit properties then compatibility tab and unchecked the box for compatibilty mode but i still get the same message. does anyone know how to get rid of this message?

    What is the exact text of the error message?
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Getting error message that states itunesexe has been set to run in compatibilty mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it .How do i turn off compatibility mode?

    recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.

    Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself): 
    iTunes for Windows: How to turn off Compatibility Mode

  • Cannot Print "current page" or "page range" in Compatibilty Mode in Word 2010

    We are upgrading to Word 2010 from Word XP
    All old documents open in Compatibility Mode
    None can print a page range or current page, the whole document prints instead
    I have tried to "Convert" to the 2010 format to no avail.
    This does not happen on Documents created in 2010.
    The only workaround I have found is to Copy the entire document into a New Word 2010 Document.
    Is there a fix for this? Is anyone else having the same problem?  It is not the same as the section problem I have seen all over these forums.
    Thanks
    Stuart Willis
    [email protected]

    Hi,
    I am writing to see how everything is going with this issue. Have you tried to update the printer driver? Is the problem resolved?
    For more research, this article may help us to continue to troubleshoot the issue
    http://support.microsoft.com/kb/918790
    Feel free to post back. Thanks.
    Tony Chen
    TechNet Community Support

  • Global Setting for Running compatibilty mode in IE

    Is anyone aware of a global setting to do the x-UA-Compatible setting for a given SAP Server? We are having compatibility issues with SAP now that we have some apps outside that require it to be turned off.

    Hi,
    Use STANDARDS mode, you need to be on Netweaver 731 version; Please check the SAP Note: 1790704 & 1753544
    If not try this: Add the url parameter sap-ie=EmulateIE9 in the url, then it should work.
    Regards,
    Kiran

  • ITunes only opens in compatibilty mode XP

    After updating to 10.4 iTunes wouldn't open, then I reinstalled it, it still didn't work.
    Then I opened it in compatibility mode for Windows XP (SP2) and it worked, but it ****** up my Windows 7 color scheme.
    So, is there a way to fix it so that I can open it in Windows 7

    When your iPod is connected try going to Edit>Preferences>iPod and enable it for disk use this may eliminate the need to manually put it into disk mode. Failing that try restoring your iPod, this will erase the hard drive, reload the software and put it back to default settings.: Restoring iPod to Factory Settings
    Just to note, if the iPod is enabled for disk use then you will need to manually eject each time before the Do Not Disconnect will go away: Safely Disconnect IPod

  • Internet Explorer and compatibility mode error

    Whilst using DMXZone's HTML5 video player, it throws up a problem on some PC's stating there is an error and states to run in compatibility mode.  Is there a line of code I can insert into the page that forces compatibilty mode to work?  The client insists that they don't have to explain to every customer what to do.
    Thanks

    'If the problem is with IE8 or below, this is because they do not support html5, the html5 shiv/js file if you are using one, only allows css styles to be applied and gives no other functionality.
    PZ'
    OK - thanks for looking into it for me.

  • Creative Zen Vision M Media Explorer does not work on Vi

    I plugged in my device, all I can see was the name of the device under Portable Devices.
    When I access Media Explorer, it said my device is not connect but in fact it actually is.
    If I copy a file via Portable Devices, it automatically freezes up my computer.
    Any idea how to resolve this problem?
    Best regards,
    TriMessage Edited by trihhoang on 0-23-200702:32 PM

    You should be able to use WMP 2 to sync your files to the player . As long as the files have album art it will transfer. You can not add the album art to files that are already one the player .You would have to delete & then sync the files that have the art. Also You may be able to use the Zen Vision M Explorer for Vista on the Win7 just install using compatibilty mode for Vista (if Win7 has that as an option) there was one written for 64 bit systems as well as 32 bit. You can tell which is which by the file name. 64 is in the file name for a 64bit system/ 32 in the 32 bit system file name.http://support.creative.com/Products...VARSET=prodfaq:PRODFAQ_433,VARSET=CategoryID:23 Click on View all Downloads

  • HELP!!! Suddenly unable to open .pdf in IE6 or IE7

    Every .pdf I try to open, results in a new window with the deadly red X in the corner. I tried uninstalling Reader 8.1.1 but I get the message: "The installation source for this product is not available. Verify that the source exists and that you can access it." Since I'm the system administrator, access should not be the issue. Most times I can get around the problem by saving the file to my computer....but some forms won't allow that (like the ones at the Department of Revenue for WA state.
    I really need to know how to fix this problem....it is costing me time every day....today I had to call the Dept of Revenue and have them fax me the form.......very time consuming.
    Thank you. Carole Grace
    PS Upgraded to IE7 hoping the problem would stop but it didn't....

    Hi,
    You can try steps "To Set "Run as administrator" in Compatibilty Mode Properties" in following article to always run IE as admin:
    http://www.eightforums.com/tutorials/9564-run-administrator-windows-8-a.html
    But to figure out the root cause of the issue, I suggest we try Process monitor to capture the behavior when your open PDF in IE 11．
    Download: Process Monitor v3.05
    http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx 
    You may find the access denied error for some files when you try to open PDF in IE11, and follow steps in this article to take ownership of them to solve the issue:
    Solving Access Denied Errors Using Process Monitor
    http://improve.dk/solving-access-denied-errors-using-process-monitor/
    Hope these could be helpful.
    Kate Li
    TechNet Community Support

  • Windows 8 support for iTunes 11

    I have seen a bit of concern around iTunes support under Windows 8.
    I have updated everything ready to upgrade a Win7 Professional PC to Win8 Pro
    I have updated iTunes to 11.0.2 64 bit.
    My question is....does the current version of iTunes (i.e. 11.0.2 64 bit) support Windows 8?
    I am not doing a clean install of Windows 8, it is not practical at all...upgrade is the only reasonable approach.
    I need iTunes for iPad & iPhone so it needs to work under Windows 8 before I upgrade
    So would be interested in knowing whether latest version of iTunes does really support Windows 8.
    It is a absolute show stopper for upgrading to Windows 8!

    Had the same issue on Windows 8.1(x64)  8(x64) 7(x64) and Vista(x86) with the latest iTunes. Removing and Reinstalling all Apple applications did not solve it. After installation and starting iTunes i would just get the end user agreement and then nothing but iTunes.exe process is running as background process without the GUI being displayed. I did notice that after an hour or 2 iTunes would then be open but would immediately freeze when connecting my iPad.
    Changed the properties of running iTunes.exe as admin in Win7 compatibilty mode.
    So launch iTunes and wait till it eventually opens, do not connect your iOS device right away, but sign in with your Apple ID first.
    Open preferences (iTunes seemed to freeze again but preferences window popped up after a couple minutes)
    Unchecked the automatic sync.
    After doing that I have been able to connect my iPad which I had already upgraded to iOS7 over the air. Which was risky as I do not have a MAC and iTunes is the only way to perform a restore if the upgrade would have failed.
    But still 11.1 seems to be very unstable on Windows, I can imagine that Apple will focus on sorting the bugs in iOS7 for their own devices first but hope they will investigate the issue and come up with a solution later on, as I do think a substantial amount of iTunes for Windows users buy their Music through iTunes and it would not be wise of Apple to leave them in the dark.

  • Windows Vista Audigy 2 ZS FULLY WORKING see h

    Ill be quick about this cause I know like most of you I was banging my head as to how to get this to work. This is what I did and its been playinng for hours without any garble. If you deviate from what I have done, post it if theres a quicker way.
    I installed the drivers from the disc that I got with the set, you will get alot of errors but it should still install fine. I would also assume you can DL the orginal NOV9 driver and install under compatability mode. (DL to desktop--->right click---->properties----->compatability and change to XP) install and reboot.
    Next, I installed the 2nd driver set (april5) and instead of installing under compatibilty mode, I opened the .exe with WINRAR and went to Drivers---->Support----->i386----->ctzapxx.exe and select "driver install" and leave "overwrite existing drivers" unchecked.
    Reboot and let me know how it worked.Message Edited by tripy on 07-3-2005 08:23 AM

    Now I have the same card, Audigy 2 ZS, and i used your method, making the first driver install compatable and then extracting the second one but it didnt work. First off when i extracted it i didnt see all those folders, for me i opened drivers and the file you were talking about was there. i installed it and a message came up telling me this driver was older then the one i was currently installing... did it anyways and still didnt work, maybe i am doing something wrong? Still getting Gargling...
    Another thing is has this driver effected anyone elses Aol Instant Messanger?

  • Can I install TES 5.3.1 saClient on 64-bit Windows 7.

    I'm getting an error:
    "The program can't start because Vcl50.bpl is missing from your computer. Try reinstalling the program to fix this problem."
    I tried to do a reinstall, but no luck.
    Any ideas?
    Thanks,
    -Kevin
    Metropolitan Community College

    Hi Kevin,
    Yes you can.  I'm running a local client 5.3.1.317 in my Windows 7 VM machine with no issues.  The Vcl50.bpl file should reside in C:\Program Files (x86)\TIDAL\Scheduler\Client folder path.  This have few quirks, such as you will lose the maximize/restore down in your windows screen unless you run the Client in "Windows XP compatibilty mode", but that is your choice.  This is a known issue and it is listed in the Tidal/Cisco Website. You still can expand your Tidal windows, but it a little hard to find the thin corners.. Hope this help!

  • Adobe Acrobat 9.4 Pro / Win7 Enterprise (64bit) - problem opening pdf

    Hello,
    i got problems opening pdf files.
    when i try to open the pdf file i get the message 'access denied'. That happens when i try to open it with a standard user.
    opening that file 'as administrator' works fine.
    I tried the Win7 compatibility check and Win7 tells me that Acrobat isn't compatibel. I tried to run acrobat.exe in different compatibilty modes (XP SP2/SP3, Win NT) -> no cure . Only thing working is to run Acrobat as administrator )

    You can try to enable Admin rights on your computer.
    In start menu use the search field, type in cmd once you see that  in your search result right click on cmd and Select "Run as Administrator".
    Once the Command Prompt open's type in.
    net user administrator /active:yes hit enter after typing it.
    You should the message "The command completed successfully."
    After you try this launch the software.

  • ISE Guest Service fail depending on the browser

    One of my customers is complaining about having problems to access the guest services depending on the browser used:
    When the visitor has Intenet Explorer 10 or 11, he said the content is blocked and even the guest portal is not displayed. When the visitor has Google Chrome (no specific version indicated), he said the portal is displayed but the content is blocked after ingress user and password. Whit Firefox a certificate exception was added in advanced options.
    I think the issue can be something related with certificates or even the  computer but I'm not sure how can I identify the root cause.
    I wonder if something in the ISE is reported about the browser used to authenticate in the guest portal. I know the release notes indicate browser compatibilities, but in guest services I think shouldn't be restrictions, because you don't know what device, OS, or browser will be used by guests.
    The ISE is running 1.1.2.145, no patches yet.
    I will appreciate any tip you can provide me.
    Regards.

    Hi ,
    This below link gives the detailed versions of the supported operating systems and their supported browsers for Sponsor and Guests.
    http://www.cisco.com/en/US/docs/security/ise/1.1.1/compatibility/ise_sdt.html
    Google chrome , Mozilla and IE are supported, but there is some restriction in the browser versions.
    For IE make sure you have enabled ActiveX controls and check if the compatibilty mode is enabled.
    If customer is making use of supported browsers and still experiencing the issue then we need to check what options are enabled on browsers and what is blocking the content download in the browser.

  • Photoshop cs4 11.0.2 update fails windows 7 64 bit

    Hello..
    I finally got upgraded to windows 7 64 bit and and installed the cs4 download I got awhile back and it installed cs4 11.0 no problems. I got every update to install but the 11.0.2 update fails and I get this message
    "Adobe Setup has stopped working"
    I have tried every thing I read, run as admin, move stuff out of appdat folder, reinstall.... reboot 39 times , I have no windowd defender or AV running at all everything I can find on here does not work and I get this error..... I read everyone gets this error except a darn few lucky souls..... so I tried compatibilty modes, it does the same error from win 98 all the way to win 7, xp same error vista same error it don't matter what version of windows this update seems to just stop working, so I did a troubleshooter on it and it determined that this program is incompatible with windows... I tried downloading it from Adobe and tried that... same error everytime.... don't matter if its through adobe updater or direct download this update fails and I decided to try 11.0.1 and it does the same so I guess PS CS4 11.0 is really not updatable to 11.0.2. and adobe suggests you to go cs5 to solve this problem. Except their updates fail to it looks like on this forum....
    This is the problem details I get if it helps, because it does not leave a log for some reason.
    Problem signature:
    Problem Event Name:     APPCRASH
    Application Name:     Setup.exe_Adobe Update Installer
    Application Version:     2.1.60.0
    Application Timestamp:     4a696125
    Fault Module Name:     Setup.exe
    Fault Module Version:     2.1.60.0
    Fault Module Timestamp:     4a696125
    Exception Code:     c0000005
    Exception Offset:     000448e5
    OS Version:     6.1.7601.2.1.0.768.3
    Locale ID:     1033
    Additional Information 1:     0a9e
    Additional Information 2:     0a9e372d3b4ad19135b953a78882e789
    Additional Information 3:     0a9e
    Additional Information 4:     0a9e372d3b4ad19135b953a78882e789

    I have tried run as admin, same error pops up, I tried giving myself ownership and special permissions and everything to the PS folder since the exe is read only thinking thats why it wont update... I ran the clean script and reinstalled and tried every trick known to man ( well this forum and several others found on google) and nothing seems to work, the 11.0.2 update itself crashes, so I am just going to assume its windows fault because it does seem to work for other people....but it does seem to crash on mac I have read too... I have UAC disabled and no AV installed trying this so I installed my trend micro AV and checked and the puter is virus free so am not sure why I can not use the update but here is the screen shots I get....
    I run setup.exe as admin I get this
    then when I click on next, with 2 seconds I get this popping up, count 1,2 bam their it is..
    so no matter what I do I get this error on 11.0.1 or 11.0.2 updates in every mode or permissions you can give...

Maybe you are looking for