IE-11 internet options page corruption from a installed program,for a solution.

In the past, Microsoft has detected with my PC with a message knowing my internet 11 is corrupted, and corrected the problem with some success. I didn't uninstall the suspect program in time to keep Internet 11 "uncorrupted". I am now personally
looking for the solution, to get Internet 11 options page & delete page to function properly again, ahead of MICROSOFTS detection for the solution used in the past.
Sincerely: Lee Vernon Payne-June 27, 2014-11:34am PST.
Lee Payne

Hello Lee, unless this issue is specifically related to Microsoft HealthVault, then I think you'll be better served contacting the general Microsoft support team
http://bit.ly/1qjQUgu or more specifically the IE support team http://bit.ly/1llkKcJ.
If however your concerns are specifically HealthVault related, the details of what HealthVault related program you installed and what the resultant problems are/were would be very helpful in getting us started.
We hope this gets you pointed in the right direction Lee.
Josh W.

Similar Messages

  • As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons.

    As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons. when it opened all apps music and pics where not there. why? then i enterted photos and the loading logo appeared then the standyby appeared and i entered my password and everything in my iphone was there but thing were scattered and apps wheren't in folders everything was messed up but no photos or music AND IT SAYS UP IN THE MIDDLE OF THE SCREEN EXIT SAFE MODE. so i restarted it again and it opened and nothing was there and again i entered photos and the samething happen again. why did this happen? and can i get my data back? and in the usage it says that these thing are there but not showing.

    stevejobsfan0123 wrote:
    The Find my iPhone service option is given to you when you first set up the device. If you just reset it, you may have been given that option. So, in other words, the service may have been enabled even if you didn't realize it. You can then go to www.icloud.com and click on Find my iPhone, and have it play a sound. Or, you can use the Find my iPhone app on your mom's iPhone, but the service would still need to be turned on on your iPod.
    Unlike Compukid said, Apple will not assist in locating a lost device without the Find my iPhone service.
    I found that out 2 years ago, it's just that I thought Apple might have changed that.

  • I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?

    I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?

    IP routing doesn't work the way many folks might initially think it does; functional IP routing requires manual configuration and the establishment of static routes and default routes specific to the local network configurations, and it's very easy to get it wrong, or to get the default route swapped. Multiple NIC boxes don't magically work, either. (Been there, done that, wondered what happened to my network when the paths got reordered or my route settings were messed up, etc.)
    Routing configuration errors can be quite subtle, too. (Again, voice of experience. Ever had a thousand-seat office LAN accidentally routing through your desktop? As the, um, unnamed guilty party discovered, getting into that configuration was subtle. Seeing the performance crater on the fellow's box and on the LAN was obvious.)
    Knowing how IP routing works is a prerequisite to getting this configuration to work; there's manual configuration required. Clearly something has gone weird here.
    What to do? Read up on IP routing. I'll again suggest the threads and the manual mentioned earlier.
    And in general, I prefer to avoid using my comparatively expensive Mac boxes as sub-optimal IP routers or as firewall boxes. General-purpose operating systems and generic x86 boxes are going to be inherently poor IP routers. Dedicated routers (or embedded or surplus x86 boxes with routing software loaded) offload the Mac boxes here, and are also typically easier to configure manage. And "real" IP routers can have hardware specific to efficiently routing packets. Use of an outboard firewall or firewall-router box also greatly simplifies gateway routing, too; it's a configuration that many folks and many businesses tend to use.

  • After I upgraded to Firefox 4 on Windows XP, I was no longer able to print anything directly from a website except PDF files. I can print documents from any installed program on my hard drive. My printer is an HP LaserJet 1220

    I edited my original question above to provide all the info that I can think of. It is very frustrating to no longer be able to directly print from a website except for PDF files. I can do a work around by copying a web page to Microsoft Word and then printing it but I don't understand why I lost a basic function. David Pollock

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • ITunes 11 update is corrupt or not installed correctly for Mac.  HELP!!

    Hello,
    got the update request for iTunes version 11, so I went through the installation process but after restarting my computer itunes would not work.  It comes up with the message 'This version of iTunes is corrupt or not installed correctly, please reinstall itunes'  there is no error code, it just says 'Error'
    I have iMac, can anybody help me fix this? 

    http://www.apple.com/itunes/download/

  • How can I call a Page Process from the Select statement for Report Page

    I'm able to call a javascript using the below:
    img src="#IMAGE_PREFIX#add2.gif" border="0" alt="Icon 4" onClick="javascript:add_connect1('||CPORT.ID||')"
    But Now,
    I'd like to accomplish (2) New things:
    1. instead of using,....... onClick="javascript:add_connect1,
    I'd like to call a Page Process, onClick=
    2. I'd like to be able to call two different processes onClick.
    a. onClick="javascript:passBack('||ID||')"
    b. onClick= <Please see my question #1 above>
    Can someone please help me with the syntax for this,
    If indeed it can even be done?
    Thanks- Gary

    Greg.
    It seems that my situation is the one you describe in you second paragraph, where you mention:
    you could then add the ID column value as a parameter to the javascript functionBut,
    I do not know how to reference the variable in my javascript nor how to use it in my on-demand process.
    If you can hellp me past this last little bump, then I think I will be able to use these skills in Sooo many different areas of my design.
    Here's what I've got so far:
    A. In the select statement I identify the javascript as:
    onClick="javascript:connect_port('<font color=blue>''||ID||''</font>')";
    B. In my javascript I have this:
    <script language="JavaScript" type="text/javascript">
    function connect_port(ID)
    var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=CONNECT_PORT',0);
    gReturn = get.get();
    get = null;
    </script>
    C. In my on demand function I have this:
    BEGIN
    INSERT INTO CCONNECTIONS_B
    BLDG_ID,CLST_ID,PORT_ID,STRAND_ID
    ) VALUES
    :P2004_BLDG_ID,:P2004_CLST_ID,:P2004_PORT_ID,:P2004_STRAND_ID1
    END;
    You can see that I dont know how to use the value for 'ID' in either the javascript or the On-Process function.
    If you can help me out with this one, Then I can imitate it for the rest.
    -Gary
    Edited by: garyNboston on Apr 3, 2009 6:44 AM
    Edited by: garyNboston on Apr 3, 2009 6:44 AM
    Edited by: garyNboston on Apr 3, 2009 6:45 AM
    Edited by: garyNboston on Apr 3, 2009 6:47 AM

  • I am trying to attach multiple photos to an email from my ipad 2. I can see how to do it from the camera and camera roll option,but not from the photos program. What am I missing? Thanx so much!

    I am trying to attach multiple photos to an email using ipad 2. I can see how to do it using the camera and camera roll ap...
    But not using the photos ap..which is where the photos are. Any help would be appreciated.!

    In an album in Photos touch the Edit button and then touch the desired photos (up to 5). A blue check appears in each selected photo. Next touch the Share button at the upper left and select Mail. This starts a email with the photos attached.

  • I do I make a mirror image from my Hallmark program for an iron on transfer?

    I am trying to make iron on labels to put in articles I make. I have created what I want to print fr om my Hallmark program. How can I get the mirror image needed to accomplish this?

    What printer model? What operating system?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Solution for clearing IE-11 corrupted internet options deleting browser history.

    Microsoft detected with a PC message, knowing my Internet Explorer is corrupted, and corrected it with some success in the past.
    I didn't uninstall the suspect program in time, to keep "clear" of the problem internet options page looking (too"refined") and the (delete page) of browser history to function properly. I 'am now looking for a (direct solution) again
    from MICROSOFT , to clear IE-11 of corrupted functions.
    Sincerely: Lee Vernon Payne-June 28, 2014-5:11pm PST.
    Lee Payne

    Hi,
    You can contact a Microsoft Support Engineer at support.microsoft.com.
    Be aware that there are many companies and websites claiming to offer or to be MICROSOFT support online or you may have received a phone call from someone claiming to be from MICROSOFT. These are scams. Microsoft nor their partners never contacts
    home users directly.
    These are public forums, we do not work for nor represent MICROSOFT.
    If you are an Enterprise user you should contact your system administrators first. They can contact Microsoft directly at support.microsoft.com for paid support.
    Questions regarding Internet Explorer 8, 9 and 10 and Internet Explorer 11 for the
    IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions. If you are a consumer looking for answers or to raise a question, it's highly recommended you head on over to
    http://answers.microsoft.com/en-us
    Rob^_^

  • MBA loses internet connection after waking from sleep

    I have a new Macbook Air running Mavericks and new 802.11ac Airport Extreme router.
    My problem is that the MBA drops the internet connection after waking from sleep. I tried the solution offered by the OP, but it didn't work.
    In my case, here's what I have to do to get a connection again. I open the Network preference pane, and then choose "Assist me..." and then "Diagnostics". Invariably it will show a green light beside Wi-Fi, Wi-Fi Settings and Network Settings. I have 5 bars showing in the WiFi menu bar icon. But ISP, Internet and Server will be yellow.
    When I go through the steps prompted by the wizard, the ISP/Internet/Server lights turn green on the third screen where I select the wireless network I want to join.
    It seems as if it's connecting to the WiFi network when it wakes from sleep, but losing the internet connection?
    Note: I have a new iMac as well running Mavericks and don't have this problem with it.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Set pages to be default program for *.doc files

    Is it possible to set pages to be the default program which my computer will ALWAYS use to open a MS word document? In windows i could set default programs for specific file types, e.g. .jpg, .mpg, mp3. I did not have to assign a program to open the program every single time. As far as I can tell , I have had to request pages to open my word documents every time i open a word doc. for the first time. Although I can set pages to be the default program for that one file, i want it set to ALWAYS OPEN ALL WORD DOCS. , until further specified. Any suggestions?
    thx.

    Highlight a known Word document in the Finder, highlight it & choose Get Info from the File menu. In the Get Info box, click the triangle next to "Open With." Click on this drop-down menu & choose Pages. If Pages is not a choice, choose "Other" & navigate to the Pages application. Now click the "Change" button under the text that asks if you want to open all documents like this with Pages. You can then double-click the Word documents & they will open in Pages. Note that the icon for the Word files will have a plain, white icon.

  • Pages as default program for text files

    I don't want pages to be the default program for opening word files, how can I change it back to Text Editor?

    Select a document in the Finder, choose Get Info from the File menu, click on Open With, select the desired application, and press the Change All button.
    (85631)

  • I need to call main window from a Standard program

    I need to call main window from a Standard program for SAP Script. I have wrote the code like this but it is not working. Kindly help me on that.
          FORM OPEN_AND_START_FORM                                     
    FORM open_and_start_form.
      CALL FUNCTION 'OPEN_FORM'
        EXPORTING
          device   = 'PRINTER'
          dialog   = space
          form     = 'ZOTC_SLI'
         language = print_co-spras
         OPTIONS  = pr_options
        EXCEPTIONS
          canceled = 01
          device   = 02
          form     = 03
          OPTIONS  = 04
          unclosed = 05.
      CHECK sy-subrc IS INITIAL.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          window  = 'MAIN'.
    ENDFORM.                    "OPEN_AND_START_FORM
          FORM CLOSE_AND_END_FORM_FORM                                  *
    FORM close_and_end_form.
      CALL FUNCTION 'END_FORM'.
    ENDFORM.                    "CLOSE_AND_END_FORM

    Hi,
    FORM CLOSE_AND_END_FORM_FORM *
    FORM close_and_end_form.
    CALL FUNCTION 'END_FORM'.
    change this to CALL FUNCTION 'close_FORM'.
    as you are not using the start_form
    you can use End_form
    i hope you understand now
    ENDFORM. "CLOSE_AND_END_FORM
    reward points if helpful.
    thanks & regards,
    venkatesh

  • How to stop a while loop in LabVIEW from a C program

    How to stop  a while loop in LabVIEW from a C code

    hi
    I think by creating dll you can stop the while loop from your C program.For that you just create dll (Dynamic Link Library) for the VI which has that while loop.
         Anyway can u please explain ur requirement clearly.

  • Unable to print pages directly from internet explorer 9 script error 2126

    HP photosmart wireless b109n-z
    computer Packard Bell One Two L5861 64bit
    I am unable after going to many forums where it seems to be quite a problem and trying different ways to try and rectify a error mesage
    An error has occurred in the script on this page
    Char 1
    Error Unspecified erroCode 0
    URL: res://ieframe.dll/preview.js
    do you wish to continue running scripts on this page?
    yes  no
    I also have avio laptop which i have no problem with printing on the same printer
    I have checked internet option advance settings and both have the same boxes ticked
    i have ticked and unticked boxes reset internet unstalled and reinstalled printer
    I can save most pages to documents and then print from there this depends on whats in the page
    The only thing that seem to make any difference was to untick the internet option security enable protection mode which would ineffect leave my computer vulnerable to attacks which is not advisible
    would be very pleased to hear if this can be resolved
    many thanks

    tejo11,
    Script errors like this can happen with IE and while uncommon are not unheard of. With the print and scan doctor coming back fine we can move to troubleshooting the browser where the error originates. If you would like try using a different browser as a temporary workaround and use this microsoft guide for troubleshooting the script error you are getting: http://goo.gl/k7aTU
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Maybe you are looking for