IE 11 is not blocked during Automatic Update step.

Greetings.
I am experiencing something very strange with our Windows Deployment Servers.
I have WDS 2013 with AIK-8.1 combination server to do our machine deployment. Some of our machines need to have IE11 blocked from installation (for compatability issue). As in case with IE10 before we installed blocker from microsoft and then captured image.
Before capturing it it was tested by runnign auto update and ie 11 is not being installed.
Problem is during deployment during automatic update step (post application) the system picks up and installs ie11.
If I remove it by hand after installation is over and run windows update - it's not installed. If I disable auto-update step in installation - and run them by hand after - it's not installed.
Does anyone else experienced this scenario when blocker doesn't seem to have effect?

Hi,
According to FAQ here:
Internet Explorer 11 Blocker Toolkit: Frequently Asked Questions
http://technet.microsoft.com/en-us/ie/dn449234.aspx
What registry key is being used to disable delivery of Internet Explorer 10?
HKLM\SOFTWARE\Microsoft\Internet Explorer\Setup\10.0
When the installation is over and about to updating, cancel the update and check the registry key.
A value of 1 turns off the automatic delivery
of Internet Explorer 11 using Automatic Updates and turns off the Express install option.
Not providing a registry key, or using a value of anything other than 1,
lets the user install Internet Explorer 11 through Automatic Updates or a manual update.

Similar Messages

  • HT202157 My Apple TV blocked during software update. What should I do?

    My Apple TV blocked during software update. What should I do?

    You can't do much else besides pull the plug. If it causes further problems you should be able to restore as below:
    Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    On the other hand you may be able to simply start the update again. If however the update continues to fail, you should try the restore routine above.

  • HT4539 How do I update my Ipad when I do not have the automatic update appt. on my ipad

    I do not have the automatic update on my Ipad, how do I update with my computer?

    iOS 4: Updating your device to iOS 5 or later

  • Power failure during automatic update installation

    I had a power failure during the installation of automatic updates. since then Safari will not open, it flashes up on screen then crashes. how can I reinstall the updates? update show as having been successfully installed and I cant see a way of reinstalling them to try to fix the problem.
    I have done a disk check and it found no problems

    brocko wrote:
    Welcome to Apple Discussions:
    Help. I was in the middle of loading a system update when I shut the power off.
    You mean you forced the computer off with the power button?
    When you say the middle of loading a system update, what do you mean? Downloading it, installing it??
    Now my MacBook Pro does not boot and only has an error message when I power up. I have read some forum topics on downloading a stand alone installer to fix and another on using my leopard install disk\utilities to "restore from time machine".
    You need to boot into the Leopard DVD by inserting the DVD, rebooting and holding down the "C" key. After the language screen, in the menu, top left, under Utilities, run disk utility and repair HD and permissions.
    That's the first step.
    If that does not work, boot into the safe mode by holding down the shift key on boot. If you get to the login screen, you are probably in good shape - just click restart and let the system reboot normally.

  • HT4191 I lost all my notes after the latest Notes app was automatically updated on my Mac Book Pro. How do I get my saved notes back??????

    When I upgraded to OS X 10.9.1 Everything got synced in very well. But a few days later when automatic apdates were completed, all my saved notes were erased(very important personal information and passwords). I couldn't restore them back. I can you (Apple Inc) help me with this problem that you've cuased???? I love your products but I hate it when you loose my information. VERY UNHAPPY.

    the terminal command you enter is
    cd ~/Library/Containers/com.apple.Notes/Data/Library/Notes; strings NotesV1.storedata | grep body | open -f
    terminal is in the applications folder under utility

  • Numbers documents will not open it says "will not open during numbers update"

    My numbers documents will not open.  I keep getting a message telling me my documents will not open while numbers is updating.  I have the latest numbers update already downloaded.

    open the application "Launchpad":
    then click, and hold, on the icon for "Numbers", once the icons start to shake, click the "X" in the top left to remove.  Now click anywhere on the desktop to exit this remove/adjust mode.
    Open the App Store  (menu item " > App Store…")
    now locate and install numbers

  • Status is not OK during IDS Update

    Hi experts!
    Just wondering if anyone has seen this error before.  It's occuring during an AD reconciliation process.  I've changed the timeout to 600 and cleared the provisioning queue using the SP, but still having trouble.
    Messages     Warning     Status is not OK. Not legal to mark running in this state (2)
         Warning     MC told us to stop. Status:2 - STOPPING!
         Warning     Pass stopped by script
    Any advice would be appreciated.
    Thanks,
    Matt

    Hi Matt
    We see the same error every now and then, but have found no explanation for it. We do not only see it when running AD jobs though. All we have been able to deduct from it is, that for some reason the MMC detects that something is not right and therefor orders the job to stop.
    We have noticed though, that when our system is a bit stressed by a large number of provisionings, it occurs more often.
    Kind regards
    Heidi Kronvold

  • Automatic update does not work

    On my both computers (Windows 7, Window 8), the automatic update does not work at all, although it is activated in the options. All I get in the Firefox info box is that an update is available, with a link that I have to follow to download the installation file and install it manually. No difference even if I wait for weeks, the update is neither downloaded nor installed automatically. The problem persists in all Firefox versions since version 3.6.16 / 2011 (the last update in the chronicle). Note that the automatic update seems to perform well in the Windows XP mode of my Windows 7 system !

    It will update eventually; there may have been availability problems on the update servers.

  • How to stop apple tv automatic updates

    Hi,
    How would it be possible to turn off automatic updates on an apple TV 3? I am working with several in a school enviroment connected to our projectors. And for security reasons they are put above the cieling so they are out of sight with cabling going through the trunking. So it's obviously a pain everytime an update prompt appears on screen making airplay useless until someone opens the cieling tiles (Due to the infrared not going through the tiles) to click update now.
    Thanks.

    @ David -- Even worse, it's not really an automatic update - that would actually fix the problem. It's an automatic prompt for update that can't be dismissed unless you have a remote.
    @ Malignance -- That doesn't work either because the only way to connect your Remote App to the AppleTV is by authenticating with an AppleID, which is not feasible in a public space like a classroom or office.
    I really wish Apple would provide an actual auto-update option so that I could just have my appletv update itself in the middle of the night instead of blocking me right at the moment I need to use the device.

  • Does Pr12 or PS12 do "automatic updates"?

    I have a new computer running Win7Pro and I installed both Premiere Elements 12 (Pr12) and Photoshop Elements 12 (PS12) within the past month.  I purchased a disc with these programs, and I had to activate and register them.
    I live in the boonies and have to use mobile broadband to access the internet.  I pay for a certain amount of usage every month....not the unlimited internet that many of you have.
    I had a HUGE usage spike (~1.5 GB) last Monday (Dec 1) that I cannot attribute to anything.  My Windows auto. updates are and have been disabled.  So, I'm wondering if Pr12 or PS12 or WORD 2013 or EXCEL 2013 can cause such a usage without my knowing.  I have Googled about this with little success, and I have tried to tell these various programs NOT to do automatic updates from the limited info I did find.....I don't know if I've been successful, b/c I don't know 'who' caused this spike.  As an example of 'normal' usage, I did download a Pr12 menu ("Outdoor Adventures") which was only a few 100 MB.....not the 1.5 GB from a week ago.  What have you heard?  Thank you.

    retchemteach
    There are no automatic updates for Premiere Elements that come to mind. You can set up to be notified when an update is available. But, then you select which updates you want to download and install.
    See Help Menu/Update and its Preferences where you should see place to select or deselect for the following
    Notify me of new updates on the menu bar
    Allow Adobe to verify update success or failure by sending the failure status
    In most cases, the updates are just for Camera Raw.
    There is automatic activation that goes on behind the scenes when you use certain features for the first time. But, that should be a one time situation for each.
    Did you look at your computer hosts file to determine if there is anything unusual going on there?
    See the following blog and its section on the hosts file.
    ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
    Somewhere along the line did you sign onto Adobe Program Improvement Program? See Help Menu/Adobe Program Improvement Program.
    Please review and consider.
    Thank you.
    ATR

  • Iphone 4S block during update 6.1.3 and iTunes doesn't recognize my phone

    Hi. During update on iphone 4S, I had an error message from itunes. It said that update wasn't possible. And now Iphone block on the screen to connect to iTunes. But iTunes doesn't recognize iPhone. If I try to reinstall the last version, I have the message that it is impossible because the current version is newer!....
    Can somebody help me please?

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • After updating, Firefox informed me that Constant Guard, the security system which is provided by Comcast, is not compatible with this update and was disabled. WHY? Will Firefox now automatically provide security against online threats?

    Firefox upgraded automatically; in doing so, it stated that Constant Guard Security Suite, which is provided by Comcast, my internet service, is not compatible, and had to be disabled. Please explain why; is Firefox providing anti-virus when I surf the internet? If not, this is NOT an 'upgrade' and I will never use Firefox. Please respond as soon as possible.

    Hi, Thanks for that further bug description In Your Last Message That Describes The Problem I Am Having perfectly and is exactly the same for me.
    unfortunately that fix for my camera Powershot G6 does not work or apply as the view pictures switch is different on G6 is not usable during download as once you plug in DC/USB cable it turns off, and makes no diff and problem still exists exactly as you just described.
    thanks anyways "Selz Boy"
    it has been 17 days since apple promised to get back to me within 3-5 days hopefully with a solution, but I have still not heard from them.
    They blew me off, i guess, probably i will have to wait for new Yosemite OS update, which they pre-warned me could take as much as 6 months.
    I cannot believe apple released this new update with such major bug issues for camera downloads and that horrible "Photos" pgm which has all sorts of downgrades in features, usefulness and new bugs compared to iPhotos which I just finally got used to and was much better software.
    I am starting to lose faith in Apple and I am getting that Microsoft "FEEL" like I used to have when I was a PC user, which was why I originally switched to Apple  computers in first place.
    Oh well got my fingers crossed here.
    Thankfully the memory card reader solution  is working well, but cost me $45.

  • Cannot verify signature block SecurityException during version update

    Hi all,
    I have my application installed on few systems using webstart. All the jars(including third party are signed by my certificate).
    After that, during an update, I signed all the jars using a new certificate.
    I have placed new jars in the cache server(Tomcat 5.0) and started it.
    Now I made necessary version changes in the JNLP file(while the server is running).
    When I started application on client machines, it tried to bring get the jars of updated version.
    During that process, following exception is shown while downloading a thirdparty jar:
    java.lang.SecurityException: cannot verify signature block file META-INF/ABC
         at sun.security.util.SignatureFileVerifier.processImpl(Unknown Source)
         at sun.security.util.SignatureFileVerifier.process(Unknown Source)
         at java.util.jar.JarVerifier.processEntry(Unknown Source)
         at java.util.jar.JarVerifier.update(Unknown Source)
         at java.util.jar.JarFile.initializeVerifier(Unknown Source)
         at java.util.jar.JarFile.getInputStream(Unknown Source)
         at com.sun.javaws.security.SigningInfo.checkSigning(Unknown Source)
         at com.sun.javaws.cache.DownloadProtocol$RetrieveAction.actionDownload(Unknown Source)
         at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
         at com.sun.javaws.cache.DownloadProtocol.getResource(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
         at com.sun.javaws.Launcher.downloadResources(Unknown Source)
         at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
         at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
         at com.sun.javaws.Launcher.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    JNLPException[category: Download Error : Exception: java.lang.SecurityException: cannot verify signature block file META-INF/ABC : LaunchDesc: null ]
         at com.sun.javaws.security.SigningInfo.checkSigning(Unknown Source)
         at com.sun.javaws.cache.DownloadProtocol$RetrieveAction.actionDownload(Unknown Source)
         at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
         at com.sun.javaws.cache.DownloadProtocol.getResource(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
         at com.sun.javaws.Launcher.downloadResources(Unknown Source)
         at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
         at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
         at com.sun.javaws.Launcher.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)I restarted the cache server (Tomcat).
    Now the download went fine. Otherthan restarting the server, no other changes were made.
    What could be the possible reason? Updating the JNLP file while server is running is a problem?
    I tried this to recreate this scenario several times.
    On certain occasions, I came across above exception along with another exception:
    com.sun.deploy.net.JARSigningException: Could not verify signing in resource: (http://abc.xyz.com:5967/XXX/JARS/ThirdPartyJars/abc.jar, 8.0)
    at com.sun.deploy.cache.CacheEntry.writeManifest(Unknown Source)
    at com.sun.deploy.cache.CacheEntry.access$1800(Unknown Source)
    at com.sun.deploy.cache.CacheEntry$9.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sun.deploy.cache.CacheEntry.writeFileToDisk(Unknown Source)
    at com.sun.deploy.cache.Cache.downloadResourceToTempFile(Unknown Source)
    at com.sun.deploy.cache.Cache.downloadResourceToCache(Unknown Source)
    at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
    at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
    at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
    at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
    at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
    at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
    at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
    at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
    at com.sun.javaws.Launcher.downloadResources(Unknown Source)
    at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
    at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
    at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
    at com.sun.javaws.Launcher.launch(Unknown Source)
    at com.sun.javaws.Main.launchApp(Unknown Source)
    at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
    at com.sun.javaws.Main$1.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)Everytime, after restarting the cache server, update download went fine.
    Does anyone come across such thing?
    Please Help me out.
    Thanks in Advance..

    I have JRE 1.5.0_14 in the client machine.
    Once this exception comes, no matter how many times I tried to relaunch the application same exception (cannot verify signature block is shown. Once i restart the server, its working fine.
    Regarding jardiff, Yes. we use it.
    Also, this exception is not shown on every machine which are trying to download same update. Only on few..
    Any idea regarding this, please share it.
    Chakri
    Edited by: chakriv on Mar 22, 2010 9:02 PM

  • Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page...

    Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..

    [BUG FIXED, see "EDIT 2" at the end of my post]
    I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
    Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
    I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
    I hope this helps!
    EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
    https://github.com/greasemonkey/greasemonkey/issues/1406
    EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful!

  • Win 7 PC freeze and block network access for other PC on same switch during windows update from WSUS

    Hello,
    It's been a problem for me for a long time now, but the last time (today) I found 3 PC on 2 different switches that block all the network on this 2 switches during the update. 
    I have a Domain with 80 PC with Win 7 (32&64bit) that takes the updates from the WSUS server that is configured on a Win2k8 r2. The system works well from 2 years from now but sometimes cause this errors that make me look like a dummy in front of angry
    employees. If one of the PC get freeze , it will cause lost of connection on all the PC on same switch, and i have to find the blocked PC, remove from network, restart switch and hope that they will came back on.
    Does anyone experienced this problem? Any help will be appreciated 
    Thank you!
    List of updates for today below

    Hi
    Thanks for your response, yes I understand that the result is a Broadcast Storm and yes I have the cheapest switch on market :/.
    The interest fact is that on one PC, I changed everything and keep only the old HDD and on last updates yesterday it was one of the blocked one too. So this make
    me doubt that is something wrong in software on that PC. I don't have any third-part programs except browsers and all have Genuine Win7 
    The only investigation remained is what happens during the update process? 
    Is WSUS involved in something?
    And another thing is the fact that some of the PC are cloned, but I have carefully changed the SID
    Thank you for your support

Maybe you are looking for