IE 11 opens and closes immediatly

Brand new windows 7 pro pc. IE 11 opens and closes immediately. I tried all fixes already posted. If i remove ie 11 from the programs in control panel it disappears. But if i try to re-install from MSFT download ie 10 or ie 11 i receive a message that a
new version is already installed even though no ie shows being installed, If i go back and recheck IE 11 in programs in control panel it re-installs the same IE 11 and has the same error, opens and closes immeditaly. I have also rolled back to system restore,
same error. FYI Chrome is installed and works fine but client needs IE for certain integration with cloud.
thanks

Hi,
I just make a supplement, if you do need to revert IE 11 to a lower edition, you need to uninstall IE 11 in Windows Update history.
Control Panel->View installed updates.
Find IE 11 and uninstall it, after that, restart your computer.
Roger Lu
TechNet Community Support

Similar Messages

Ibooks open and close immediatly on ipad, Ibooks open and close immediatly on ipad, Ibooks open and close immediatly on ipad

All in the tittle
Ni error message : it opens then immediatly close
iPad

Have you tried closing the iBooks app completely and seeing if it works when you re-open it ? From the home screen (i.e. not with iBooks 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iBooks app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
A third option is to delete the app and re-download it - in which case you may want to copy all your books/PDFs to your computer's iTunes first (File > Transfer Purchases).

Invocation API: JFrame opens and closes immediatly when invoced.

Hello,
I'm sitting with an existing software, to which I would like to create a Java GUI to present calculation results in a nice way (simple editing, saving in different formats, etc.). The core is Fortran 77 and 90.
Right now I'm trying to figure out how JNI works, and I have been able to make some C code show a Jframe. However, the JFrame disappears immediately if I don't make the runningThread.sleep() for some time, and I can't seem to find any GUI sample code. If I run it in NetBeans it stays open until I click the X.
In the end I would like the GUI to be started from Fortran 90 when a user gives the plot command in the application console.
In addition to the above problem, I would like a push in the right direction. What should I think about with this approach? Any common traps?
This is how the test looks:
Java code generated by NetBeans, where I just want to display a JFrame.
public class JFrame extends javax.swing.JFrame {
 public JFrame() {
 initComponents();
 @SuppressWarnings("unchecked")
 private void initComponents() {
 setDefaultCloseOperation(javax.swing.WindowConstants.DISPOSE_ON_CLOSE);
 setTitle("JFrameInvoced");
 setCursor(new java.awt.Cursor(java.awt.Cursor.DEFAULT_CURSOR));
 javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane());
 getContentPane().setLayout(layout);
 layout.setHorizontalGroup(
 layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
 .addGap(0, 400, Short.MAX_VALUE)
 layout.setVerticalGroup(
 layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
 .addGap(0, 300, Short.MAX_VALUE)
 pack();
 @SuppressWarnings("static-access")
 public static void main(String args[]) throws InterruptedException {
 JFrame frameTest = new JFrame();
 frameTest.setVisible(true);
 Thread runningNow = Thread.currentThread();
 runningNow.sleep(1000);
}C code from internet.
#include <stdio.h>
#include <jni.h>
JNIEnv* create_vm() {
 JavaVM* jvm;
 JNIEnv* env;
 JavaVMInitArgs args;
 JavaVMOption options[1];
 int ret;
 /* There is a new JNI_VERSION_1_4, but it doesn't add anything for the purposes of our example. */
 args.version = JNI_VERSION_1_4;
 args.nOptions = 1;
 options[0].optionString = "-Djava.class.path=D:\\Source\\Invocation_test";
 args.options = options;
 args.ignoreUnrecognized = JNI_FALSE;
 ret = JNI_CreateJavaVM(&jvm, (void **)&env, &args);
 return env;
void invoke_class(JNIEnv* env) {
 jclass helloWorldClass;
 jmethodID mainMethod;
 jobjectArray applicationArgs;
 jstring applicationArg0;
 //helloWorldClass = (*env)->FindClass(env, "InvocationHelloWorld");
 helloWorldClass = (*env)->FindClass(env, "JFrame");
 mainMethod = (*env)->GetStaticMethodID(env, helloWorldClass, "main", "([Ljava/lang/String;)V");
 applicationArgs = (*env)->NewObjectArray(env, 1, (*env)->FindClass(env, "java/lang/String"), NULL);
 applicationArg0 = (*env)->NewStringUTF(env, "From-C-program");
 (*env)->SetObjectArrayElement(env, applicationArgs, 0, applicationArg0);
 (*env)->CallStaticVoidMethod(env, helloWorldClass, mainMethod, applicationArgs);
int main(int argc, char **argv) {
 JNIEnv* env = create_vm();
 invoke_class( env );
}

sammen wrote:
Can multithreading be a possible solution to this?Multithreading is certainly involved when you create a GUI using SWING, as SWING automatically creates a thread where all drawing and event handling is performed. Calculations and other longer tasks are performed outside that thread. This is done to avoid blocking the GUI during calculations.
But first focus on the interface between the C program, where the calculations are performed, and the Java program, where the GUI should be located. Possible questions you should ask yourself are:
- What data must be sent from the C part to the GUI?
- What actions do I want to trigger from the C part, e.g. "create a plot"?
- What actions do I want to trigger from the GUI to the C part, e.g. "redo calculations"?
Then you could design the interface between those two. The multithreading performed by SWING has to be considered especially for the third question, as event handlers like "actionPerformed" are called from the SWING thread and should return quickly, just triggering the action, but not performing it. But those things are better discussed in the SWING forum.
Martin

Apps open and close

hello
i have a iphone 4. My apps open and close immediatly. I can't use them.
What can I do ?
thanks for your help
Chris

Hey Chris,
It just happened to me. If all the brought apps are closing immediately (and excluding the built in ones) then try either:
1. Restart your phone.
2. Hold the home button for the task bar and hold the app for a few seconds until they jiggle and a red cicle with a line in it shows up. Touch each one (this is just deleting them and "refreshing them", you aren't really deleting the app).
3. Go to the App store and buy a free app, any, and install it. Try opening one of your apps now. This worked for me. If it works, you can go ahead and delete the free app.
4. If all fails...restore your phone.
Good luck!

Apple Mail opens and closes right away since migrated to Mavericks

Hello all,
Could you please give me some safe and not too complicated solutions to solve this :
Yesterday I migrated to os x Mavericks => Everything works fine except MAIL application (I work with 1 gmail account)
Problem : I click the incon, Mail app opens bu closes immediatly followed by an error message saying :
" Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[__NSSetM addObject:]: object cannot be nil'
abort() called
terminating with uncaught exception of type NSException ".
For your information, when going to gmail account from the web, the mailbox works. So it doesn't come from Google.
Thanks a lot in advance for your help!

Solution from linc davies - Perfect
Quit Mail.
In the Finder, hold down the option key and select
Go ▹ Library
from the menu bar. Move the following items from the folder that opens to the Trash (some may not exist):
Caches/com.apple.mail
Saved Application State/com.apple.mail.savedState
Application Support/AddressBook/MailRecents-v4.abcdmr
Containers/com.apple.mail
Mail
Preferences/com.apple.mail.plist
Preferences/com.apple.mail.searchhistory.plist
Note: you are not moving the Mail application. You’re moving a folder named “Mail.”

Find open and close smart quotes

Dear scripter,
Here I am trying find whether all the open double smart quotes(") are closed with close double smart quotes("). Here is my small work to find how many open and close quotes.
myopenqu=app.activeDocument.search("^{", false, false, "^{");
myclosequ=app.activeDocument.search("^}", false, false, "^}");
myopenqulength = myopenqu.length;
myclosequlength = myclosequ.length;
if(myopenqulength!=myclosequlength)
alert("Quotes not matched\n"+ myopenqulength +" Open quotes found\n" + myclosequlength +" Close quotes found")
It works well, the script just alert if I have 25 open quotes and 23 close quotes
Quotes not matched
25 Open quotes found
23 close quotes found
Now I want to find the quote set where the 24,25th set close quotes are missing?
Is there any way to find the misisng quotes
Thanks in advance
regards
a r u l
vpublish.net

You'd have to look for unmatched quotes, in this case two cases of two open quotes without an intervening closed quote. This is difficult to script in CS2 because it doesn't have GREP natively and because of footnote problems. In CS3/4 it should be possible. But even then it will work only if you don't have quotes within quotes.
Peter

Report OPEN and CLOSE in computers client

Post Author: B.prata
CA Forum: Crystal Reports
I have an application developedin Visual Basic with report in the CR 4.6, but in the computers customers when I will access the application,I try to emit a report , it opens and close the report. What can be?

There is no FaceTime app for the iPhone if that's what you're asking. FaceTime is accessible through your Contacts as one of the options in how to contact a person -- there is no standalone FaceTime app for iPhone.
If you mean how to disable FaceTime, you can do that in Restrictions (Settings/General/Restrictions).

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

My apps dance open and close on their own in my IPad 2 what can be the prob? I have already restored

I got the charger flex or pin changed and now the apps dance on the screen, photos open and zoom in, then out, the other apps open and close. I have already restored the device with Itunes and prob is still there. What can be the problem? Any suggestion will be welcome. Thank you

THANKS for your prompt reply Bluetooth is off in my laptop and IPhone.. and in fact the reset is the only thing that can make it back to normal. But for a lil while. I wonder if it is the touch, or the home botton... both things are very expensive to replace, so I wouldn't like to spend $$ and continue having the prob.....

Apps in iPad 1 open and close quickly

Hello,
My mother has an iPad 1 (she has her own itunes account) but had never synced and updated her iPad with a computer (pc or mac).
Today I had to use it and connected to my iTunes on the pc but only to update her iOS on the iPad wich was 3.x. After the whole update process (wich went normal and smooth) almost every app that I woud open, closed imeadtly. I say ALMOST because, a few from the default apps (like Mail, Photos, Safari, System, etc) opens normaly. Though iBooks doesnt and all 3rd party apps also doesnt open normaly.
I've tryed to reboot it one more time thinking it was some kind of strange bug or something but didn't work. The apps continue to open and close almost instantly.
I'd like to know if anyone had a similar problem and how they solved it or if my only resource is to roll back to the iPad backup made in my pc.
Thanks in advance.
Luis Felipe

Try double-tapping the home button, then holding the app icon until the minus sign appears. Touch the minus sign to kill all the apps. Then restart the iPad with the home/power buttons (hold for ten seconds) until the apple appears.

Where we have to open and close posting periods in asset accounting

hi sap gurus
can anybody give where we have to open and close posting periods in asset accounting
thank you
venkatareddy

Hi Venkatareddy,
You make specifications for fiscal years and posting periods in the SAP R/3 System in Customizing for Financial Accounting. This is done in the fiscal year variant in the global parameters of the company code. These settings are, in general, also binding for Asset Accounting. The depreciation periods in Asset Accounting then correspond to the posting periods in Financial Accounting. It is usually not necessary to create a separate fiscal year variant for Asset Accounting.
The period control in the depreciation key determines the start and end of depreciation when asset transactions are posted . The period control determines the relationship between the calendar period in which the asset transaction is posted and the depreciation period.
These calendar periods are independent of the posting periods in Financial Accounting. The only restriction is that the beginning of the first calendar period and the end of the last calendar period defined in a period control have to match the start date and final date of the fiscal year in Financial Accounting.
Kindly let me know if this useful for you

How can I enable the center mouse click to open and close tabs in Firefox and Chrome?

I have a MacBook Pro Model A1261 purchased in 2009. On my other mac at work (and my PC) I can center click to open a link in a new tab while in Chrome or FireFox, and also to close a tab by clicking on it in the tabs at the top. I am using an external USB mouse on my MacBook Pro and when I click the center scroll wheel it brings up the dashboard. I looked in the settings but wasn't able to find a way to change that setting for the center button to open and close tabs in my web browser. Is there a way? Please help!

You can restore the zoom feature by changing the values of the related prefs on the about:config page.
* browser.gesture.pinch.in -> cmd_fullZoomReduce
* browser.gesture.pinch.in.shift -> cmd_fullZoomReset
* browser.gesture.pinch.out -> cmd_fullZoomEnlarge
* browser.gesture.pinch.out.shift -> cmd_fullZoomReset
* browser.gesture.pinch.latched -> false
*http://kb.mozillazine.org/about:config
See also:
*pinchy: https://addons.mozilla.org/firefox/addon/pinchy/

What is the better way to open and close connection in bean

Hello, may i ask about the best way to open and close the connection?
At the first, the connection code is store in Conn class bean. The JSP page will call a method in Process bean to process the query and update of database. the Process bean is using th Conn to connect to database.
In my process bean, it have a method for each type of sql like select, insert, update, and delete for each tables. Each method will call the Conn to open and close the connection. The jsp page can simply call a method retrieve or update records.
However, when calling the processUpdate method, it is a method that update a group of tables base on the query result of another group of tables and calculation. If I calling the query method in the same bean file, it will open and close the connection many times (more than 1000 times). After open and close the connection several times, the connection to mySQL will be fail.
Currently, i include 2 method in Process that is only calling the Conn to open the connection and close connection. When calling the openConnection method, it will also set the boolean connected in the class to true and call Conn to open connection. When calling the closeConnection method, it will also set the boolean connected in the class to false and call Conn to close connection.
After that, i add some change to the query method which is when the connected is false, it will open the connection by calling the Conn and close the connection themself. If the connected is true, it will not call the Conn to open and close the connection because it already connected to the database.
Now, i when i calling the query method in jsp, it can open the connection and close the connection individually. When i call the processUpdate in the jsp, this method will calling the openConnection before calling the query and calling closeConnection at the end. It not only faster the process(less open and close), it also no cause the connect to mySQL fail error again. However, it also make the coding in the bean file more longer and complex.
Is there have any better solution?

Use connection pooling. This will put the connection management in the hands of the webserver, not your code. Check out this post:
http://forum.java.sun.com/thread.jspa?threadID=741788&messageID=4252932#4252932

Any way to see ICONS in Open and Close Dialog boxes?

Is there any way to see ICONS in Open and Close Dialog boxes, instead of just lists of items names?
I know you can preview one at a time, but I'd love to see all my artwork as picture icons, just as you can in a finder window.
Windows does this, but not OSX that I know of. Is there a third party app that enables you to see icon view in the Open and Close Dialogs?

Thank you Steve Jobs. I guess that feature has been added in Leopard. Now there really is nothing that I'll miss from Windoze.

Two intervals in Open and Close Posting Period (OB52)

What is the purpose of the two intervals (period 1 and period 2) in Open and Close Posting Periods (transaction OB52)?

Hi,
Financial statements cannot be prepared on the last day of the accounting period... to find out the correct profit and to determine the correct financial positing... sometimes you may require to make some adjustment to accounting records after the closing of the accounting year... like adjustments for expenses payable, income receivable, writting off bad debts ...etc.
For posting those transactions....period 2 is maintained ..which are also called as special periods... to make the postings in these periods ...special authorisation is required.....
Period 1 is for regular postings ...
Radha

IE 11 opens and closes immediatly

Similar Messages

Maybe you are looking for