IE 11 Website Display Issues - Scripts/Images

I'm having website display issues with IE 11 on Windows 8.1 64-bit, ironically with Microsoft.com, Bing Search and TechNet forums amongst others. The IE 11 version is: 11.09600.16384.
Microsoft.com looks as follows:
If I reset IE settings then everything is OK until the next GPO sync on the client, at which point the sites are all broken again.
Using the IEZoneAnalyzer tool I have sync'd Group Policy, then reset (IE settings > Advanced > Reset) and compared the differences - GPO defined/pushed settings under 'GPO', defaults (following reset) under 'Reset':
I've tried changing the settings that are different to no avail... any ideas?
Thanks, Chris
MCTS 70-640 | MCTS 70-642 | Prince2 Practitioner| ITIL Foundation v3 | http://www.cb-net.co.uk

Moderator Please Delete This Discussion
This Same Discussion Ripited 1 Times
DushYant'
I've removed the duplicate thread. Thanks.
MCTS 70-640 | MCTS 70-642 | Prince2 Practitioner| ITIL Foundation v3 | http://www.cb-net.co.uk

Similar Messages

Display issue - My macbook pro 2011 detects my display but does not display an image

Hi, I am having a problem connecting my MacBook Pro (2011) to my HP 2511x display. I used the display all morning with my mbp connected and closed. When I came back, after the computer went to sleep, I cannot get any image on the display. The computer detects the display but no image appears.
I have tried-
Installing the latest firmware and software updates
restarting both the computer and monitor
trying all of the possible display arrangements and settings for resolution and refresh rates
Also I am connected using a minidisplay to DVI adaptor in the thunderbolt port.
Any and all suggestions appreciated.
thanks.

Hello Aminetti,
It sounds like your computer goes to sleep, and will not wake up, so you must manually restart your computer. I recommend the troubleshooting in the following article:
OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Reset SMC
Reset NVRAM/PRAM
Test with external devices disconnected
Try Safe Mode
Try another user account
Thank you for using Apple Support Communities.
All the best,
Sterling

Any ideas why I would be having this display issue on just one page on my website?

Firstly, the webpage URL that is in question is http://crawford3d.businesscatalyst.com/maya-models.html.
The issue arises only when I publish the site and this is my second attempt to fix the issue. The first page was created with anchors that pointed to 7 embedded videos from youtube. The problem was similar where the page was sliced and the location of the videos where changed. I'm using the same master page for this page that I'm using for the other pages, so I'm thinking it is something to do with just that one page. My attempt at a fix was as follows: I used a composition lightbox to embed the videos so I could just click on the thumbnail to view the videos individually: however, the problem must not be with the method I'm using because I'm getting the same sliced display on the page. As you can see on the page a preview of the videos are also being displayed which is not supposed to happen when using a "lightbox". Please Help!! Thanks

Hi MrCrawford3D,
In one of your embedded Youtube videos HTML, you have a number of closing <div> tags, and a closing <body> tag. That will be causing the display issues you are seeing. Might just be a copy/paste issue, but removing those should fix your problem.
Hope that helps,
Andrew

All websites display only text and images, but on a white background (no design graphics)

Only the bodies of websites display. None of the headers, footers, menu bars, etc. show. All is white. I reinstalled Firefox with same result. IE displays correctly. I have a new Dell Studio XPS with Windows 7.

See:
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

Safari not displaying web site image

I have a website that is suddenly not displaying the header image in Safari and IE5.2.
I have my suspicions that it is due to a JavaScript from Google to run their Analytics programme which I installed a few days ago, (and will shortly remove it to confirm the suspicion or otherwise.)
But first I wish to check if other people are experiencing the same problem, or if it is localized to my computer. (Need to be able to inform Google if their script is the fault and affects all Safari users or only some versions. So please check the site and report results here, including your Safari version. Mine is Safari 1.3.2 (v312.6) and Internet Explorer 5.2 for Mac.
The site is http://www.paintmaking.com
What I see in Firefox, Netscape, Opera, and Camino is a flash title over a colored background with a photo.
Thats what I saw in Safari until recently too. But suddenly all I now see in Safari and IE is the flash title over a gray background, no photo, and above the menu bar a very thin strip of color (about 1mm, 1/16in). The sidebar images are unaffected (and those images at the side work fine in all the browsers), it is just the header.
Can you please tell me what you see and the browser version?
Tony

Thank you to everyone who has reported what you are seeing on my website. Now I need some help to troubleshoot the problem. So far I am confused as to where the problem lays let alone what the problem might be.
I need guidance as I am running out of ideas for troubleshooting. Are there any files that I should try trashing?
Could the problem lie in my Flash player perhaps (how do I test this?
Updates:
I can see only a gray color behind my flash title on http://www.paintmaking.com in Safari 1.3.2 (v312.6) and Internet Explorer 5.2.3 (5815.1). What should be there is a colored header image.
I have established that other people can see the image correctly, including on the same builds of Safari and IE and on the same OS (10.3.9). An exception is someone using Shiira who can only see gray in Shiira, but sees colors in other browsers including Safari.
On my computer Netscape 7.2, Firefox, Mozilla, Opera and Camino can all see the image correctly.
Safari and IE have the same problem displaying the image on all the accounts on my eMac.
I have: cleared cache with no improvement, checked Safari Preferences (Java enabled, JavaScript enabled, and 'display images as pages open' is checked.
I have removed the software that I installed recently. (MacTracker)
I have removed a piece of JavaScript added recently (from Google to facilitate their Analytics programme)
The only major thing I have done lately that is out of the ordinary is to Clone my OS X hard drive to an external drive using SuperDuper.
I don't seem to be having problems with other websites.
So how can this be? If the problem is in my computer why only the one site affected? (I checked several sites) Yet if the problem is with the site then why can other people see the site correctly?
(A very puzzled) Tony.
eMac + iBook 12 inch (10.3.9 on both) Mac OS X (10.3.9) PowerPC G4 1 GHz 1 GB SDRAM + (iBook) PowerPC G3 500 MHz 384 MHz SDRAM

Flash Display issues in IE11

I require some help with an issue in viewing videos on the BBC website.
Issue (See attached image)
When I access a web page with a video I can see the video
When I start the video only the bottom 1 centimetre or so is displayed
The details of the technology are
Adobe Flash Player 16.0.0.235 1.11.1.160690-SMPFlash
NPAPO Plug-in Version: 15.0.0.239
PPAPI Plug-In Version: Not installed1500kkbps | RTMP (Akamai) | h264 | 704x396
Internet Explorer 11Windows 7 Home Premium Service Pack 1
Version: 11.0.9600.17633
Update version: 11.0.16 [KB3021952])
Product Id: 001500-20000-0003-AA459
System type: 64-bit Operating System
Manufacturer: HP
Model: HP Pavilion g6 Notebook PC

Hi,
Thanks for your advice.
I managed to resolve the problem by updating the content in the Compatibility View settings, i.e. I added www.bbc.co.uk to the list. I have also taken your advice and update my version of Flash Player.
Thanks again.

PHP website displays on web server but only text shows on local testing server

Hi, I am not a PHP programmer.
I tried to get the testing server set up in the DW site definition area but was unsuccessful so I am back tracking to first make sure I have a working testing server. So, here is the info:
I took on a new client with a simple PHP site, without any databases.
The site is up and running on the web.
I would like to eventually get it running on my local machine to integrate editable regions for use with Adobe Contribute.
I have latest version of WAMP installed running Apache version 2.2.11 and PHP version 5.3.0
I created a directory in the WAMP "www" project directory and it shows up like it's supposed to when I browse to "localhost"
Problem:
The home page of website displays text but no, images, styles, footer, header, nav links, etc.
Here is the code for the home page:
Welcome This is the content area. This is the content area. This is the content area.
Any help would be greatly appreciated. I have spent many hours on this.
Regards

Hi,
Not sure what you have going on there. One thing I would try is to enclose all your php code within <?php code here ?> not <? code here ?>
Also ADDT does not work fully with php 5.3.0 as this may also be your error. When you say it only shows text do you mean dynamic text values or just text that is not dynamic?

Display issue on brand new 2014 X1 Carbon Touch

So I was about to start raving about my X1C that I just received. Loving the display, the keyboard, build quality, etc. I had no gripes and was just browsing away when suddenly the screen did the full glitch. I recognize this as what happens when something's messed with the motherboard/display adapter. So I gave it a reset. All was normal and then it happened again. I was able to replicate it 3-4 times and it keeps happening. I never dropped it or anything. It was always just stationary.
I can't believe this. I had problems with the first gen non-touch and touch. I was hoping by now they have improved.
Link to image 1
Link to image 2
Link to image 3
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules

Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you have display issues in your brand new Lenovo X1 carbon.
From the snapshots, it seems like a cable/LCD issue. Is the display working fine when you connect it to an external monitor?
Since it’s a brand new machine, I strongly recommend you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best Regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Help with SWFObject2, problem with display of alternate image

I'm trying to use SWFObject2 dynamic publishing version to test the visitors browser for flash pluggin and the version.
I want to only show my flash image if the browser finds the flash plug in and it supports the correct version of flash for my banner, otherwise I want to display a jpeg image in its place.
When flash support is available in my browser the flash image is displayed, no problems. But when Javascript or flash plugin support is not available and my alternate image jpeg is displayed something wierd happens and i would appreciate any help on this:
The image is displayed but is pushed to the right of the screen and it seems to have a box behind the image, the edge of the box is only visable and changes colour on rollove like it wants to be clicked, obviously i cannot see what the box is because the image covers it. There is nothing wrong with my image, i put that in place first and tested it loaded ok before i added the SWFObject code and file.
My code is below:
<script type="text/javascript" src="Scripts/swfobject.js"></script>
<script type="text/javascript">
swfobject.embedSWF("advertise_banner.swf", "altContent", "468", "60", "6.0.0", "expressinstall.swf");
</script>
</head>
<body>
<div id="wrapAltContent">
<div id="altContent">
<a href="advertise_banner.php?ad=y">
<img src="Images/advertise_banner.jpg" alt="Image linking to information on advertising a banner ad on Choose Almeria" />
</a>
</div>
</div>
Looking forward to replies.

Hi,
Is this your question still relevant? If yes, did you study already this for example?
http://code.google.com/p/swfobject/wiki/documentation
Hans-G.

Display Issues with mini (Mid 2010) and LG L246WP

I recently purchased a new mini (Mid 2010 base model) and planned to use it with my 24" LG L246WP monitor, which is about 3 years old. The monitor has VGA, component, and HDMI inputs.
I used an HDMI-to-HDMI cable to connect the mini directly to the monitor, and the output is completely messed up. The mini recognized the monitor (titling the System Preferences > Display dialog with 'L246WP') and set it to the monitor's native resolution of 1920x1200, but on the monitor the image is cropped to what looks like a 4:3 aspect ratio and with part of the image shifted up and left so I cannot view the top menu bar or the left hand side of the desktop. The monitor's on-screen display shows 1080p in this mode.
The Display dialog also gives me an option for 1080p. I can select this and use the Underscan slider to resize the desktop output to fit on the screen, but it is still shifted left and must be resized smaller than the available display space (plus the total image is only 1080 pixels, not using the monitor's full native screen). In this mode, 1080p also shows on the monitor's on-screen display.
I tried 1024x768 to see if I could get a properly-positioned image, but the desktop was shifted just like in the 1920x1200 case and the monitor's on-screen display status still reported 1080p.
The monitor has a menu setting under an HDMI heading with "Video" and "PC" options, but changing this selection does not make a difference.
Since the monitor came out before HDMI was as widespread as it is today, it came with a DVI-to-HDMI cable, so I also tried using that cable with the HDMI-to-DVI adapter that came with the mini, but this did not make a difference either.
To prove it wasn't the HDMI cable, I connected the mini to my Samsung 6300 series 40" LED HDTV and with some tweaking of the Underscan slider the displayed image filled the screen perfectly.
I've searched the Internet and various forum threads (i.e. http://hardforum.com/showthread.php?t=1167222&page=63) seem to indicate this monitor can send a corrupted EDID that causes issues, especially with nVidia graphics drivers. On Windows you can use registry or driver hacks to override the EDID with the correct values, but on OS X this doesn't seem possible (I was hoping for a Terminal one-liner but it seems this doesn't exist). I have seen some mentions of the shareware SwitchResX (http://www.madrau.com), which looks like it gives you the option to override resolution settings, but I haven't tried this yet.
It also appears to me that the monitor is always interpreting the signal (or the mini is always sending the signal) as 1080p, even if I've set 1920x1200 in the Display dialog. I don't know if this is a defect in the monitor where it always assumes the HDMI input is a 1080p source (previous I used it with an Xbox 360 with no issues but that was 1080p HDMI), or if is a bug in the graphics drivers (or at least a lack of flexibility / miscommunication to the user trying to handle a corrupt EDID).
I asked my local Genius Bar for advice today (without bringing any hardware in) but was not told anything I didn't already know.
I'm trying to determine the best way to work through this issue. *My questions are:*
Would it make any difference if I used a Mini DisplayPort-to-DVI adapter (and then my DVI-to-HDMI cable to the monitor's HDMI input)?
What about a Mini DisplayPort-to-VGA adapter? In the past I used a 12" Powerbook (via a mini-DVI-to-VGA adapter) with this monitor and had no display issues like this, but I'd prefer to stick with a digital connection on my brand new mini.
Is SwitchResX the only practical way in OS X to override a corrupt EDID and force the mini to output a certain resolution?
Besides the various adapters and SwitchResX, is there anything else I should try before buying a new monitor?

Hello EPWilson4984.
I have been experiencing the same issues you described. Connecting my brand new Mac Mini to my Westinghouse 24”monitor (L2410NM, 1920x1200 pixel resolution) produces a very fuzzy and washed out image quality. The Mac recognizes the monitor and applies the right resolution (1920x1200), but it looks just awful. The EDID info is definitely not right.
Now, I tried your suggestion (DVI-to-HDMI), and similar suggestions from other threads, but nothing works. Nothing seems to work at all.
The main input for the monitor is HDMI, so whatever cable I use, in the end always has to connect to the monitor via HDMI. I tried all these combinations with zero success:
Mac mini -> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –HDMI adapter-> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –DVI adapter-> DVI-to-HDMI cable -> monitor (result: it gives me a blank screen, no image at all)
I’m running out of options. Don’t know what to do. The 24” monitor produces beautiful, crisp images when hooked to my Windows 7 PC. It looks horrible when connected to my brand new Mac Mini.
Any alternatives you may have come across? Please let me know, thank you.

Repeated iMac Problems, Display Issues now Kernel Panics

I’m lost on what’s wrong with my 2008 iMac and I think I just have to bring it back into Apple for a third time to have it repaired. But something is obviously not working that is causing these issues.
About a month ago, my computer began showing heavy pixilation, flickering images and the on-screen graphics. The computer appeared to keep working in the background from what I could tell so I came to conclusion that it must be the graphics card that’s failing and I’ll need to have it looked at.
My 2008 iMac was custom-built by Apple with the Nvidia GeForce 8800GS that was offered as an upgrade option. There have been several posts on the display and graphics discussion board about that graphics card along with other postings other places about the problems the Nvidia GeForce 8-series had.
The display problems I mention above would not happen immediately, it would happen as the computer warmed up and was used for 3-5 minutes.
Anyway I brought my computer into Apple explained to them what I believed was the problem and the Apple Store technician agreed with me. Because I did not purchase AppleCare, it cost me $400 and a week without my iMac to have that card replaced.
I got the computer back two weeks ago and everything seemed fine. It was working as it always had. I even was running SMC Fan Control in order to keep the computer as cool as I could (the Nvidia problem was related to overheating).
But this morning, this is what I woke up to:
http://img97.imageshack.us/img97/7436/photoijr.jpg
The computer now has a semi-permanent pixilation when it starts up (as suppose to the pixilation 3-5 minutes into use). But more worrisome now is I cannot start up the computer without it going into a kernel panic. I tried resetting the PRAM, I tried starting in safe mode. The only thing I haven’t tried yet is booting from an external HD which I will try this evening (to hopefully isolate it if it’s hardware or a software problem).
The Apple Hardware Test has been unhelpful. When it originally failed three weeks ago, the test showed nothing and this morning when I ran it (permanent pixilation and all), it showed nothing. I feel like if it was a software issue the pixilation would have disappeared during the hardware test because that’s not an OS-X based program.
Here are my specs on this computer:
2008 iMac 24" 2.8ghz Intel Core Duo, 4 gigs of RAM (Crucial Purchased, I have original sticks somewhere), 1 TB HD, Nvidia GeForce 8800GS.

Hi, just to update you, I came home today and did a few things that didn't seem to solve my Mac's problems:
- I booted up from my firewire "safe" drive that I keep a copy os x on to see if I had a corrupted hard drive or something. It booted into the kernel panic I described above.
- I also swapped out the crucial RAM for Apple's factory RAM. It also booted into the Kernel Panic.
In both incidents, the display issues didn't go away. Now instead of pixelization i have vertical bars running in a pattern across my screen.
I'm currently trying to boot onto the OS X CD at this point to see if I could do a reinstall. It's taking quite awhile to boot into that.
With that in mind, I think we're still having graphics card issues or more seriously some logic board problem.

Unable to display a PDF image on the page - Mac 10.6

Hi,
Running an iMac with 10.6.8 and Indesign 5.0.4. Just wanting to export a PDF as per usual via File > Export function. However, I keep getting the error message, "Unable to display a PDF image on the page'. No idea what this is and have never seen this error before. The only info on the internet reveals error code 0x2511(9489).
I've deleted prefs, closed down and re-opened Indesign and even restarted the computer. I've also re-linked the images contained in the document and even created a new document and set it up the same, but still the same problem. Investigating further, other Indesign documents still export properly.
The only ones that don't export are 2 documents, both giving this same error message. Both documents are ones where a client has sent a PDF, I've imported into two of these into an 2-page A4 Indesign document (each PDF is 48MB each) and then just added a text layer (using Times) which is properly installed on the computer. I basically have to 'update' course dates for the client and add PDF to the website, all very basic.
I've tried importing a jpeg and other PDFs into the file (replacing the existing ones) and they export fine.
All my software is legal and I've exported this document before now in exactly the same File > Export without any problems (under 10.5 and 10.6).
OK... I've just imported the offending PDFs into Acrobat, optimized and shrunk the file size, re-imported back to Indesign and the PDF export works fine. So it seems InDesign / PDF Export doesn't like large imported PDFs? I think they were originally exported from Publisher, so maybe that's the problem or a file conflict somehow.
Any ideas on the culprit? I've googled it, searched these forums and Apple discussions and haven't found anything. Although I've found a workaround, I do get large files to import and then export. Thanks for any help
Steve

It does sound like a problem with the original PDF files the client sent you. You can check how they were made in Acrobat Pro from the Additional MetaData button on the Description tab of the document properties dialog. It will be under Advanced at the bottom of the list when the metadata opens.
You might be able to salvage them by running the optimzer and not changing the size, or just doing a Save As in Acrobat.

I need to display my Blob image in my report (and also on form page)

Scott,
I followed the APEX advanced tutorial for uploading and downloading files. I have created a form on a table and that table contains a column of datatype BLOB. Now I want to be able to display the (Blob) images that I have uploaded.
As I research the topic, I get the feeling that displaying the BLOB image can only be done in APEX 3.1 and up. Is this true? I have that version of APEX installed on my laptop and have successfully completed the "Defining and Viewing BLOB Data in Oracle Application Express 3.1" tutorial found here: http://www.oracle.com/technology/obe/apex/apex31nf/apex31blob.htm
But I could not do it on the company server that runs APEX 3.0
Even if I did get the approval to have the company APEX application upgraded to 3.1, there still is the issue of scaling the images so that they are not so large. I understand that there is a UTIL.APEX function "GET_BLOB_FILE_SRC" that would do this for me. I read the documentation at:
http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10499/api.htm#CHDICGDA
After reading it, I was still not clear as to how to use it correctly. Is there any documentation on how to implement this function in APEX?
I did find something that I was hoping would help me. The article is entitled "Show Blob of other table in APEX Form" by Dimitri Gielis can be found here: http://dgielis.blogspot.com/2008/07/show-blob-of-other-table-in-apex-form.html
I tried to import the file "blob_support.sql" application (on both APEX 3.0 and APEX 3.1 systems) but got errors. I'm not having very much luck here and would appreciate the help in pointing me in the correct direction.
Help!!
Thanks
LEH

Hello John,
Your information was helpful. I can now see my images in my form.
OK, now I would like to be able to call the image using a Region Source of type SQL instead of the HTML Expression. The reason for this is because I need to use logic to determine if the file is an image or not and to determine wether to show a thumbnail or just a link. I did find a "GET_BLOB_FILE_SRC" Function on the internet that suggests that I could do this but I need some help in making it work in my application.
Here it is as a Region Source of type SQL:
SELECT ID,
NAME,
CASE WHEN NVL(dbms_lob.getlength(document),0) = 0
THEN NULL
ELSE CASE WHEN attach_mimetype like 'image%'
THEN '<img
src="'||apex_util.get_blob_file_src('P4_DOCUMENT',id)||'" />'
ELSE '<a
href="'||apex_util.get_blob_file_src('P4_DOCUMENT',id)||'">Download</a>'
end
END new_img
FROM TEST_WITH_BLOB
If anyone can help me with this that would be appreciated.
Thanks
LEH

Photoshop CC display issues

Hello
I am new to Photoshop CC and I'm having some teething issues.
For many years now I have been using CS3 and have just upgraded to Photoshop CC.
The issues I am having are mainly display issues. When looking for a file in CS3, I use to be able to see a small picture of the file when selecting a psd file....now in CC I can't see anything, even with the preview on (see attachment so you understand what I am meaning - first file is the OLD CS3 view and second file is the new CC view
Another issue is, I can't see the extensions in CC.....like: .jpg or .psd etc. How do I change that ??
Can anyone help with my issues ??
Cheers
pwhinder

Do you have CC on the same computer as you used for CS3? What you are showing us is related to your operating system rather than Adobe. There are various workarounds to show proper thumbnails for PSD files, but we need to know what your operating system is before advising.
An alternative would be to use Bridge, which has thumbnails for all image formats, along with lots of other useful search and display filters.
The file extension is also a function of your operating system. If you are using Windows, go into Folder options, click on the View tab, and uncheck 'Hide extensions for known file types'
Good luck

Display issues on mid 2009 Macbook Pro

I have had a recent intermittent display issue on my Macbook pro. It started a few months ago and is not a constant issue. External displays are fine so it seems to point to a connection between grahpics card and the 13" screen.
You can see an image of the problem here:
Does anyone have experience of similar issues?

i've done a complete rebuild back to 10.6.8 and found that both problems appear to have disappeared, both screen and TV working again since this morning without seeing any issues.
I'm now installing Lion to see if it returns.
the only difference will be that I'm not going to install bootcamp until later, this will be a clean install as before I installed Lion on a previous version of 10.6.8 with bootcamp etc already installed.
maybe this will work, wish me luck

IE 11 Website Display Issues - Scripts/Images

Similar Messages

Maybe you are looking for