IE 5.0 Acobat Reader 5.0 Report output

Hi!
If you running reports using
IE 5 and
Acrobat 5.0
drill down reports does not work.
It sends the request to report server and runs the report but when it comes back to browser it does not display.
It display small icon on left hand side coner in IE. Netscape is fine.
Any ideas/suggestions.
Thank You
Nirali

I have the same problem so I upgraded to IE 5.5 and Acrobat 5.0 now it works fine.
Cheers
Rao

Similar Messages

Can't Print or Save in Adobe Acobat Reader DC

I was using an older version of Acrobat reader and deleted it because it wasn't updating since 2012. I loaded the Adobe Acobat Reader and it will not print or save. Using Mac OS 10.10.2.

Hi Ben,
This could happen due to an Adobe Acrobat Reader DC installation file corruption. I will recommend you to uninstall Adobe Acrobat Reader DC, restart your system & reinstall Adobe Acrobat Reader DC using this link Adobe Acrobat Reader DC Install for all versions.
You can also refer to this KB doc. for help Troubleshoot PDF printing | Acrobat, Reader
Let me know if the issue persist.
Regards,
Aadesh

READ-ONLY CHARACTER MODE REPORT OUTPUT

Hi,
I am using Developer Suite 10g Report Builder to create a character mode report. I use commands as below to open the report output;
PROCEDURE Run_Report (vReportname varchar2) IS
LINEBUF VARCHAR2(2000);
BEGIN
linebuf := NULL;
linebuf :='C:\DevSuiteHome_1\bin\rwrun ';
linebuf :=linebuf||vReportname;
linebuf :=linebuf||'destype=file desname=c:\windows\temp\L610.prn ';
linebuf :=linebuf||'&& "C:\Program Files\TextPad 5\TextPad.exe" C:\windows\temp\L610.prn';
host('cmd /c '||linebuf);
END;
The reason why I am using third party software is because customer wanted to view the report output first before proceed with printing and I had tried with all option PDF, HTML, Notepad, Wordpad, Ms Word Viewer 2003, they all got problem wether fail to preview the output nicely or printer cannot recognize the generic output. As for now Textpad is the best in both to preview nicely and printer with generic driver can print the output nicely.
But there is another problem. Anybody can edit the output preview onTextpad and customer do not want that to happend (security for accounting data).
So, can anyone suggest me how to create the ouput in READ-ONLY mode? But please do not advise me to print directly to the printer because on 9i PREVIEWER function works well while on 10g this function has been obselate so I need to find the replacement of PREVIEWER function to running on web.
Thanks.
Regards,
Faisal

What about trying to view the text in the browser (IE/Mozilla)? That is what we do about reports produced by reports server: they are written in files on the reports server machine and opened with the browser, or they are sent directly to the printer.
Otherwise, i simply see no way to prevent a text editor from editing the file on screen. If, let's say you make the file read-omly, that won't do, for the user may change the data on screen and print what's on screen without saving the file...

Failed to read data from report file Reason: The table could not be found.

BO Enterprise XI R2, cannot publish crystal reports using the publishing wizard.
Failed to read data from report file Reason: The table could not be found.
Any ideas to get around this would really help out.
Regards

Connection used Views, ODBC System DSN is setup properly.
Approach for import from business view manager and import wizard. both methods failed to import the Business View and underlying reports.
I figure I may have imported the Business View wrong? From Business View Manager I exported from my dev server then imported to prod server.
Apparently I learned exporting my business view also includes the Data Connections that the Business Views are dependent upon.
So which ever folder you specify it copies it there. Originally the all Data Connections Resides on the root folder. To return it to the original location. I deleted what I had exported. Exported this time to the root folder, then only deleted the business views, foundation, elements. Then exported again to the folder where I intended then only deleted the Data Connection.
Makes any sense? So I then had to re point the business views and all the dependent objects to the data connection that resides in the root folder.
I tested the connection, it works fine. I properly updated my crystal reports to the business view in production. Did a sample extract it works as expected.
However when i try to publish, either from Crystal or Publish wizard i get the same error?
As a work around i am thinking, after updating the business view in the crystal reports, shall i re map the fields?? or reexport the business views again?
Any help will be surely appreciated.

Is it possible to read MS Access report file .snp with Bold 9000

HI
I would like to read MS Access Report file .SNP generated by an internal application.
This file is part of an e-mail as attached object.
Is it possible to do this with my BB 9000?
Thank you in advance,
Nik

Hi and Welcome to the Forums!
Natively? No, I don't think so. Your choices are, I believe:
1) Seek out a 3rd party add-on app that will render that file type
2) Adjust the app that is generating the file and convert it to PDF before sending. Then, for as long as the item remains an email attachment, the email attachment service will be able to render the image on your BB. There are also add-ons (fee based) to enhance the quality of the rendering.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can anyone tell me how to read a crash report?

I can not find anywhere on how to read a crash report. Can anyone tell me? The only tutorial I have found is located here, but it pay-for subscription only.
For some reason I a lot of my applications are crashing. A lot of the applications are 3rd party, but today two Apple applications crashed...Preview and iPhoto.
The only thing I can attribute to these crashes is my uninstallation of Garage Band using Deinstaller. I uninstalled all GarageBand*.pkg files in my /Library/Receipts/ folder.
Here are my two recent crash reports: iPhoto Preview
Any help would be much appreciated!

I used Pacifist to replace what the Product
Specialist was the corrupt file and I am still
crashing applications...specifically BLT. Click here to view crash report. I have
never had a problem with BLT, so I don't know why its
just now starting to crash.
I redownloaded the
application and have notified the Developer
requesting assistance. I think it's a system issue
because it happens in multiple user
accounts.
The crash report refers
consistently to 0x9294d120 which is at the top of the
crashed thread. This thread refers to a
com.apple.Foundation file causing the
problem. I can not locate this file anywhere
within my system or the 10.4.6 Combo
update.....anyone have any suggestions after
reviewing the crash report?
Here is a technical guide concerning the Crash Report:
http://developer.apple.com/technotes/tn2004/tn2123.html
and here is a guide for Crash reporting:
http://developer.apple.com/bugreporter/bugreportingguide.html
Apple, of course doesn't have to support third-party products, so it's best to contact the third party with regards the issue. There are simple things you can check like the installation, hardware incompatibilities... etc, but I assume you have done this from reading the earlier verbiage in the thread.

Failed to read data from report file, failed to read parameter object

Error message when doing a u201CSchedule List of Valuesu201D
failed to read data from report file,
c:\docume~1\user........
failed to read parameter object
Earlier in the day it worked just fine nothing had been changed.
I have admin right on the windows server and in central management console
Can someone please help with this issue.

Hi Glenn
Please let us know the following:
1.What is the exact version of Crystal Reports Designer?
2.What is the version of Business objects Enterprise installed on the machine?
3.Are reports based on Business views,Deski,Webi?
4.Are the reports migrated from older version of Crystal Reports to new Version?
Thanks
Shraddha

Failed to read data from report file : Reason: Crystal Reports: Print Engin

Hi,
When we try to migrate the crystal reports from BO R2 to BO R3, some of the reports are faling with the error:
Failed to create a new Report.Reason: Failed to read data from report file C:\DOCUME~1\xxxxx.rpt. Reason: Crystal Reports: Print Engine Error
Would please someone help me in fixing the issue.
Thanks and Regards,

Few quick checks to identify the cause -
1. Are you able to run report in your R2 system?
2. In XI3.1, check SIA running on which account.
3. Check the acount have sufficient rights on file system and registry.
4. What's your web server?
Give proper rights and import again. Hopefully it will resolve.
Edited by: Das on Dec 6, 2010 9:47 PM

Failed to read data from report file

Hello ,
When iam trying to publish crystal report to Bo enterprise using Publish wizard, i get below error
*"Failed to read data from report file C:\Users\prakash\Desktop\new_obj.rpt. Reason: File I/O error. File ~cidbc64f360135e0.rpt."*
can you please help me in resolving it
Regards,
KumarTP

Please post this to the [Business Objects Enterprise Administration|BI Platform; forum.
- Ludek

Can't import music; error message reads, "The importer reported a generic error."

I've attempted to drag and drop multiple music files into the Soundtrack bar but nothing is working. I keep getting the same Error Message, which reads, "The importer reported a generic error." Can someone lead me in the right direction with some help?

Along with the comments by both John T., and Steve G., there have been some issues reported with both of the two, Fixed Audio Tracks, Soundtrack and Narration. I do not think you have gotten that far yet, but wanted to point out the potential for those issues. Should you get your music Imported into the Project, but have issues when you use either Narration, or Soundtrack, just use an empty "regular" Audio Track.
Good luck, and please let us know more about your music files.
Hunt

Adobe acobat/reader doesn't work with this version of firefox

adobe acobat/ reader wont let view info says close adibe acobat and web browers when i do firefox closes and i lose page i was looking at

I have the exact same problem. I updated to 3.6.12 and encountered the "blank page" printing problem. I ended up re installing Firefox 3.0.19. Printing works great. Also Firefox 3.5.15 gave the same blank page printing problem. I also installed "Better privacy" and " Ghostery"at the time of updates. These programs do not run under the 3.0.19 version. Not sure if if they are related to the problem. Good luck and hope a solution to the problem comes about.

Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
Brajesh

Pretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.

Change order of key figure is not working in Web report output (using WAD)

Hi,
We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
Though same change order is working fine in Bex Analyser.
Kindly suggest some inputs.
Thanks.

Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha.

How To Restrict Number Of Rows For Multiple Group In Report Output

Hi ,
I have a requirement to restrict number of rows in report output.I have three different group , if i use same no of rows to restrict then output is as expected but if i want Deduction group should have 7 rows , earning should have 5 rows and Tax group have 3 rows in report output then XML tag is not working.
Below is the XML tag i am using -
First i have declare the variable to restrict the rows -
<xsl:variable name="lpp" select="number(7)"/>
<xsl:variable name="lpp1" select="number(5)"/>
<xsl:variable name="lpp2" select="number(3)"/>
For Each -
<?for-each:PAYSLIP?>
<xsl:variable xdofo:ctx="incontext" name="DedLines" select=".//AC_DEDUCTIONS"/>
<xsl:variable xdofo:ctx="incontext" name="EarLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION!='Taxable Benefits']"/>
<xsl:variable xdofo:ctx="incontext" name="EarTaxLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION='Taxable Benefits']>
<?for-each:$DedLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
<?if:(position()-1) mod $lpp1=0?><xsl:variable name="start1" xdofo:ctx="incontext" select="position()"/
<?if:(position()-1) mod $lpp2=0?><xsl:variable name="start2" xdofo:ctx="incontext" select="position()"/>
Report output is tabular form (one page has two column - Earning and Deduction ) . Tax group comes below earning group.
Deduction Group -
<?for-each-group:$DedLines;./REPORTING_NAME?><?if:position()>=$start and position()<$start+$lpp?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Earning Group -
<?for-each-group:$EarLines;./REPORTING_NAME?><?if:position()>=$start1 and position()<$start1+$lpp1?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Tax Group -
<?for-each-group:$EarTaxLines;./REPORTING_NAME?><?if:position()>=$start2 and position()<$start2+$lpp2?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Please let me know in case additional detail is require.
Thanks in Advance.
Thanks,
Harsh
Edited by: Harsh.rkg on Jan 14, 2013 9:43 PM

variable lpp2 is declare to restrict EarTaxLines -
<xsl:variable name="lpp2" select="number(2)"/>
This will help to restrict the no of rows on one page , if we have more then two tax benefits line then layout will roll over to continuation page.
As part of report output my expectation is if i restrict Earning , Deduction and Tax benefits to same no of line for example - variable lpp ,lpp1 and lpp2 have same value "number(2)" , we can see the layout is continue on next page (restrict every group can have max two lines) .This is the reason we have 4 header grid , deduction and Tax Benefit lines are rolled over to continuation page .But if we restrict different value for each variable then continuation page layout is missing .
When we tried for <xsl:variable name="lpp2" select="number(3)"/> value continuation page layout is not getting generate for both employee number .

Intermittent Blank Rows coming in BI Publisher Report output

Hi,
We are working on a BI Publisher report output.
Issue
The report sometimes creates a blank row along with the headings of the report columns. Table has multiple records and between 2 records we have a data being displayed which is optional. When this record is null, it is creating an extra space and hence creating a new page with the headers and a blank row.
Reducing the space is one issue we have thought of. Are there any other pointers to this.
Thanks
Ishani

Hi,
I did not got the complete thing but as you told you need to remove the blank space in the report and at the same you told when a column returns null the row get displayed as blank row.
Then can you try using the Conditional region so that when ever you find the column value as null so you can hide that row.
Just try it i donot no if your requirement is exactly like this or what.
Thanks.

IE 5.0 Acobat Reader 5.0 Report output

Similar Messages

Maybe you are looking for