IE 7.0 Upgrade / SAP-GUI Patch Level =6 .22

Hi everybody,
After upgrading MS IE to release 7.0 some HTML-Controls did not work
propery anymore
Actual Version is as folllows:
640 Final Release
File-Version sapfront.dll: 6405.5.18.301
Build: 819511
Patch-Level: 18
So I want to upgrade my SAP-GUI to Patch level >= 6.22 (23)
But I can't find this new Version.
Does somebody know, from where and how to download it ?
Thanks a lot in advance
Michael

You can download the patch from service.sap.com.
Click SAP Support portal, enter creditials, now click downloads, SAP SUpport Packages, from the left, click Entry by Application Group, now on the right, SAP Frontend Components, Now click SAP GUI for Windows, SAP Gui For Windows 6.40, again SAP Gui for windows 6.40, Win32. Now in the table below you need to download the following.
setup640_23-10001615.exe
gui640_23-10001615.exe
First run the setup patch, then the gui patch.
Regards,
Rich Heilman

Similar Messages

Can I restore SAP GUI patch level 5 from Patch level 7

Hi,
I updated SAP GUI 710 from patch level 5 to level 7, is it possible to revert this change to patch level 5 again, as our business requirement is only patch level 5.
How to restore it back?
Also, what changes made by SAP in patch level 7 from 5, 3 etc?
Thanks

Hi Martin
Thanks for answering my queries.
Reason for going back to patch 5 is to maintain all client of production system at one level.
Certainly using higer patch level will also includes all functionalities of lower level.
But, did someone try to load patch 5 on patch 7, does it work?
Becoz, I am in production, so not in very good position to take this risk.
What you ppl say?
There should be some way to restore your GUI to back date, is it!, like one we do to restore our windows machine.

Where can I get Patch for upgrade SAP GUI 3.O to 3.5

Hi All,
Could you please let me know the patch to upgrade SAP GUI 3.O to 3.5.
Thanks in Advance.
Sridhar.

Hello Sridhar,
I think you should get the latest SAP GUI Version which is 6.40 from ftp://ftp.sap.com/pub/sapgui/.
Regards
Gregor

GUI-Patch Level

Dear Freinds
I had installed the SAP-GUI-Server and from this server I had installed the saplogon pad to respective clients
I am using SAP-R/3 4.6C
I wanted to know which PC / Computer is on which saplogon pad and which patch level
Is there any table were this information get updated
Thanks for your reply
Domnic Gonsalves

Hi,
GUI patch level information not stored in SAP. It will be stored in GUI operating system level.
Regards
Ganesh

Cannot open survey files from email after upgrading SAP gui to 720

Cannot open survey files attachments from email after upgrading SAP gui from 640 to 720.
Tried uninstalling & reinstalling but still error persists,
Error is : cannot split connection string: /h/server name/s/sapdp00 ( from SAP GUI security )
Please advise.

Can't say I have seen this error before but if it is pertaining to the new security module within 7.20, which are much more strict then 6.40, I would look under the SAP GUI configuration options. Focus on Security > Security settings.
There are pages and pages of rules which can be defined.
A test could be to disable all of them on an isolated machine and set them to allow and see if your problem persists. If the error is resolved, it is something in there you need to address.
Regards,
Zecher

How to find out SAP J2EE Patch Level for 04s

Hi all
I want to find out SAP J2EE Patch Level for 2004s installation i tried to get information from SYSTEM INFORMATION link on WAS homepage but it gave only version :7.00 details and PATCH LEVEL was not mentioned .
I also tried to find out by looking into VERSION.TXT file for server & dispatcher in ....USR\SAP\J2E.....engine installation but again no details about PatchLevel was mentioned can anyone provide some information regarding what is the PatchLevel for WAS 7.0 , J2SE used is 1.4.2_09
Thanks in Advance !!
Asif

Thanks Kenny ,
But as you can see from version.txt file for Server0 it does not mention PatchLevel it is
blank
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
i also checked version.txt for dispatcher it is as below
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
I tried this on different 2004s server but the Patch Level is not mentioned whereas for 2004
servers it is mentioned
so can u give some inference based on above descriptions about What should be SAP J2EE Patch
Level for the 2004s servers
Regards !!
Asif

What are the latest updates in the SAP GUI patches?

Hi All,
Can anyone let me know what are the major updates in the SAP GUI 730.
Any note that says this..The release note with each patch is too grainy and i cannot consolidate what are the major updates.
We are currently on patch level 1 and SAP GUI have patch 8 released?
Can someone kindly assist in identifying the major updates in SAP GUI 730?
Thanks,
Deep Desai

Hi,
You can see in the info section what are the new notes added in that patch.
Please see the below screenshot for your reference.
Regards
Sudhir Sadhu

Gui Patch Level Question!!!

HI,
We are using Gui 640 and patch level is 11. I just saw in service market place that the latest patch level is 27. I have forgotton that do I need to apply only 27 level or do I have to download apply all from 11-27... I am kinda confused between actual SAP patch and Gui patch. I think I should be fine If i download 27 directly and apply. Please correct me If m wrong.
Thanks,
I will post points for sure.

Hi,
Thanks a bunch.
Can you be able to answer my otehr threat?
GUI 7.0 or higher required micro..excel 2003?
Thanks,

DB space history not updating in DB02 after upgrading to NW7 patch level 11

We upgraded our NW04 system to NW7 patch level 11 and now when I go into DB02 and click on DB space history there is no new data since the upgrade. SAP_Collector_For_PerfMonitor runs every hour without error. I've checked st22 and there are no shortdumps and I can't find any timeout issues. Ideas?

You may need to a newer release of saposcol. Saposcol comes with your kernel, if you haven't updated your kernel recently that could be a conflict with your saposcol.
Lee

Should we follow the sequence while upgrading to latest patch level?

Hello,
While applying patches in any module say HR,if my current level is SAPKE60028,Can I dirrectly download SAPKE60034
& upgrade it or should I follow the sequence?
SAPKE60028,SAPKE60029,SAPKE60030,SAPKE60031,SAPKE60032,SAPKE60033,SAPKE60034.
Regards,
Rachel.

Hi Rachel,
You cannot directly upgrade from a lower level SP level to higher SP level directly for ABAP stack by skipping the ones in between.You will have to follow the sequence and it will also not let you to proceed say from SAPKE60028 to SAPKE60030 unless you have the SAPKE60029 in between.The prior level is checked as a prerequisite in order to advance to the next level.
However, for JAVA statck upgrade it is possible because in Java whatever patch level u choose it is consolidated.For instance, if you are at patch leve 12 at present and want to upgrade to level 17 then the patch level 17 is a consolidated package consisting of all the levels from 1 to 17.While upgrading it removes all the existing previous SP and deploys SP level 17 right from the beginning i.e level 1 to 17.
Thanks,
Saby..

How to check the previous loaded SAP GUI patch number

Hi
now I am installing patch#24 SAP GUI ,now where to check the previous added patches,where I need to check, please mail the path

Yes, Rolf is right.
For every patch run there is a sapsetup<n>.log.
Look at the file timestamp for the sequence.
But what you see is a very indirect clue what you have installed.
You see a very verbose installation protocol which is obviously targeted to developers of SAPGUI to troubleshoot installation issues...
What they forgot to trace is the name of the patch file...
The clues for the versions involved are texts like
File version of source file is: 6405.5.24.1016
File version of target file is: 6405.5.23.1016
In this case I have updated 6.40 GUI Patch 23 to Patch 24
HTH, Rudi

SAP 2007B Patch Level?

Hi All,
I have installed SAP 2007B PL 0 at client place. Is there any updated patch level available for SAP 2007B. If yes, Pls guide me how to download?
Regards
shashi

Hello Shashi,
https://websmp110.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
please go for 'Installation and updates' which you can find on your right hand panel, then SAP Business One products> Updates.
Regards,
Wilma Wang
SAP Business One Forums Team

New SAP GUI Patches

Hi,
a couple of new patches were posted to ftp.sap.com :
- SAP GUI for Windows 6.40 Patch 15
- SAP BW 3.5 AddOn Patch 7
- SAP GUI 6.40 - ECL Viewer Patch 2
Best regards,
Christian

Hi John,
short update: I talked to the service market place team, and unfortunately the software corner is not a standard SMP site, so the nice features you know from other pages are not available, and won't be in the near future.
I will post news about new patches here, but as mentioned this is not part of the official workflow and may not always happen, for example when I'm on vacation
Best regards,
Christian

Sap kernel patch level

Hi Gurus,
   How can i find the current patch level of kernel i am working on.   I work on 4.6c. OSAIX. DatabaseDB2.
Thanks in advance,
Sachin.

Hi Bhaskar,
Thanks for the response.
In
SM51--> Release Information
i could see
Support package number      2307
. So is this the kernel patch level?
Thanks in advance,
Sachin.

Import External Bank Statement in SAP B1 Patch level 34

Hi all,
How do we do External reconciliation in SAP B1 2005. How to Import External Bank statement in to SAP B1 2005.
Regards
Shashi

Procedure
       1.      In SAP Business One, choose Banking - Bank Statements
and Reconciliations - Process External Bank Statement. The Process
External Bank Statement window opens.
       2.      In G/L Account, enter the appropriate G/L account number
and choose TAB.
       3.      Choose Bank File to start the import.
A file browser appears allowing you to choose a folder.
       4.      Open the appropriate folder and select the required bank
file.
Payment Engine uploads the file as a test run. On the Protocol tab page
of the Payment Engine window, the system displays the result of the test
run. If error messages are displayed here, go back in the process,
correct the errors and start a new test run.
If error messages are visible in the log file you are not able to store
the data in the external bank statement table OBNK.. Check the following
        Check that your bank file format is correct
       In the Chart of Account, check to see if the Type Input file
is correct (user-defined field).
       5.      If no error messages are displayed on the Protocol tab,
choose the Preview tab to view a preview of the run. You can switch
between bank and accounting view using the radio buttons.
       6.      Now you can start a production run. To do so, choose
Production Run and OK. The output data will be stored in the external
bank statement OBNK. After a successful run, the system informs you that
the bank statement was imported successfully.
Choose the Bank File tab to check that your file has been imported. You
can also find status information in the log file.
Regards,
Eleven

IE 7.0 Upgrade / SAP-GUI Patch Level =6 .22

Similar Messages

Maybe you are looking for