IE 8.0 Error Message After New AFP Install

Hi,
Was already running AFP, so when the new release came out, I got notified automatically, and allowed it to update. Now, when I run IE, I get a popup saying "Adobe Flash Player Installer/Uninstaller 10.1 r82 has stopped working.
The problem details are:
roblem signature:
Problem Event Name: APPCRASH
Application Name: FlashUtil10i_ActiveX.exe
Application Version: 10.1.82.76
Application Timestamp: 4c4fd88f
Fault Module Name: FlashUtil10i_ActiveX.exe
Fault Module Version: 10.1.82.76
Fault Module Timestamp: 4c4fd88f
Exception Code: c0000005
Exception Offset: 0000215c
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
I'm running Vista Home Premium SP2 64 bit on an AMD quad core with 8GB RAM.
IE8 32-bit (of course).
I can't get by this error - If I choose "Close the Program" it loops back after a few seconds with the same message. So right now, IE8 is unusable.
Help!
Jim D.

Hi, If you received a prompt from Adobe to update Flash Player, when it was finished, did you Reboot(restart) your computer?
Using IE, go to Tools, Manage add ons. Look for "Show" and under All add ons, find the Shockwave Flash Object and make sure it is Enabled. It should also list it as vs 10.1.82.76(latest version of FP)
That would be the first thing to check.
Let me know.
Thanks,
eidnolb

Similar Messages

Time Machine error message after new motherboard installed

Hi folks,
I just had a new motherboard installed on my MacBook Pro, and now whenever Time Machine tries to do a back-up (on the same external drive I'd used previously for Time Machine), I get an error message that says there isn't enough space.
It appears that the attempted back-up tries to back up the entire internal MacBook drive (rather than just the latest updates).
In other words, since the external drive already has the old data on it, attempts at back up fail.
Is there something I need to update? Or, do I need to delete all the data on the external (i.e. Time Machine) drive and let the system do a complete back-up?
Any advice would be greatly appreciated. Thanks very much.
Vic

You could try the procedure in the article linked below, but I recommend that you first start a new TM backup on another drive. You need more than one backup anyway. I haven't tested the procedure myself and I can't promise that it won't destroy your backup set, even if you do it right.
10.5: Repair Time Machine after logic board changes - Mac OS X Hints

Error message after downloading and install rolled back (using up data limit)

error message after completing install of trial. then program was rolled back. I do not appreciate using up data allotment unnecesarily, people.Thanks for any assistance.

Rhumsike which Adobe software or service are you trying to install? Also which operating system are you using? Finally what is the error message which you are receiving?

Error messages after new MobileMe Calendar upgrade. Solved?

Quick rundown of what I've been through and how I have solved my problem.
I have a MacBook running 10.5.6 and I also have Bento 3. Recently Bento (Filemaker) told me that I would have to complete a few steps before upgrading to the new MobileMe calendar. So I followed the steps exactly. (URL: http://help.filemaker.com/app/answers/detail/a_id/7846/~/setting-up-bento-for-th e-new-mobileme-calendar)
After completing the steps. I proceeded to upgrade to the new calendar. Upgraded in less than a minute and then after opening up iCal on my mac & importing my calendars, thats when things started to go wrong. I kept getting error messages on almost every even I have ever created. I could barely even quit iCal due to all the error messages. Also, many of my events werent there after importing and the progress wheel kept spinning. Complete DISASTER! (*Luckily, I made plenty of backups before doing any of this so I was safe*) But Still I had NO iCal!
I searched and searched and could not find a complete solution. So what I did was the following and so far I believe it could be the solution to all of you guys's problems.
I followed these instructions on this website (URL: http://answers.makeitwork.com/how-to-reset-ical-on-your-mac-or-how-to-clean-up-y our-ical/) **I followed these exactly**
They are below:
+Export any Calendars you wish to retain after you reset by clicking on the Calendar you wish to retain and go to File > Export… > Export…+
+Repeat the above process for every Calendar you wish to keep. (Make sure you remember where you saved them)+
+Quit out of iCal+
+Go to Finder and click on your Home icon to display the Library folder.+
+Open that folder+
+Open the Calendars folder in the subsequent window+
+Delete all the contents within that folder+
+NOTE: If you open iCal at this point, it will initially appear that you cleared everything. Within minutes, however, everything will come back.+
+Go to your Utilities folder and open the Terminal application+
+Enter the following command: rm -rf ~/Library/{Caches,Caches/Metadata,Preferences,Application\ Support}/iCal+
+Exit out of Terminal+
+Open iCal and…Voila! Brand new iCal!+
But that did not completely work. So before doing this again, I went to my iPhone and quit syncing calendars on my mobile me account. And chose to ERASE every calendar on my iPhone.
After doing that and repeating the process above, I opened up iCal and boom, it worked. Then after I had the calendars setup the way I wanted on my MacBook, I proceeded to go to Preferences>MobileMe>Sync> and then chose to sync
I then went to Me.com and checked to see if the calendar was operable and it was 100%. I could do everything like before. Then I went back to my iPhone and just turned Calendar syncing back on in my mobileme preferences.
This has solved all my problems 100%. Hope this helps someone. Just remember that as long as you created a backup of your Calendar you should be safe.
-Cody-

Well... seems I didn't have any answer on this. I fiddled a bit more but I have to say that I really came to wits' end at this stage. A couple of observations though:
* I don't really understand this notion of a keyboard issue. My keyboard and its layout work properly but I will not be able to login regardless of login through GDM, KDM or Slim. Yet it's worth noting that in the case of GDM and SLIM the X server starts; I see the graphical interface, I click, etc. but when I type the trouble starts.
* I tried to check my xsessions-errors file. The file is really big under a frame buffer, and it wasn't clear to me, but I found strange that the log was reporting all sorts of attempts to start KDE. I don't exactly know what's going on.
If anybody has any clue, let me know... It's becoming very frustrating.
Thanks!

ITunes library.itl cannot be read error message after new installation

Hi,
I have just downloaded iTunes to install on a new Lenovo laptop running Windows 8.1, and after installation I have received the following error message "iTunes library.itl cannot be read because it was created by a newer version of iTunes".
It was a 'clean' installation - I did not have any previous versions installed and have not yet copied my music across to the laptop or connected by iPod.
Any suggestions?
Thanks

Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

Error message after new download

10/13/11, I got the following error message today when trying to download newest version of iTunes
"The following install step failed: run preupgrade script for Apple Mobil Devise Support. Contact the Software Manufacture for Assistance."
Will someone explain this in English. Is this part of the discussions I'm seeing about Leopard, Lion, Bears, oh my...

Try this manual download link, it worked for me.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604
Scott

Error message after trying to install Tiger on a B/W G3

I've tried several times now to install OS 10.4 Tiger from the black install DVD onto my B/W G3. Every time, it gives me a error message saying there were errors during installation and to restart. I've got 512-640 MB of RAM (I've removed one after market 128 RAM hoping that would help). I upgraded the HD to a Maxtor 200GB a couple years ago. I'm at a loss as to where to go from here. We just got new iPods and can't even load them until this OS is upgraded. Other than buying a new Mac, what can I do to resolve this issue?

I would, but I don't have it on CD. I finally got the drives switched and the drive was ready to be rebuilt when DW gave me an error message saying there was a file open on the HD. I've basically figured that it is beyond repair until I can get my files backed up and reformat the drive.
In the meantime, my brother is going to give me his iMac G5 and upgrade to a new Mac.
Thanks for all the help.

HT1926 I received an error message after trying to install the update of itunes. Now I can't even open up my itunes. When I tried to download itunes again it showed it was already a file. Still can't get into my music. What should I do?

I received a notice to download a newer version of itunes. After starting the process of downloading I got an error message which then suggested I try to download itunes again. When I did this it showed the file was already in my system and stopped the download process. Now I can't open my itunes to play my music. What can I do to get it back?

The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562

Windows error message during palm desktop install

Have been trying unsuccesfully to install palm desktop. Windows XP Home Edition generates error messages after software is installed which prevents using the desktop software. Uncomfortably, I have my data only on my Tungsten e handheld.
Post relates to: Tungsten E

Thanks for the info. I am still unable to install PD414setup.exe onto an XP machine. The error message that I got was: "Error opening installation log file. Verify that the specified log file location exists and is writable".
Thank you in advance,
Chris
Post relates to: Treo 650 (Rogers)

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
This in SharePoint 2013 Farm.
What should I do?
1- I did a DisableLoopBack and set the value to "1".
For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
P.S. I fixed this issue once, long time ago and I forgot how it ... be done.

Hi,
For troubleshooting your issue, please take steps as below:
1.Go to IIS, make sure the web application is actived.
2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
Reference:
http://support.microsoft.com/en-us/kb/926642/en-us
http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error messages after upgrading kernel (devfs to udev) [SOL]

when installing the new kernel i got a message to change my menu.lst so it changed "/dev/discs/disc0/part3" to "/dev/hda3" (and nothing else) cause of udev instead of devfs.
after rebooting i get few error messages:
[after network start]
SIOCSIFADDR: No such device
eth0: unknown interface: No such device
SIOCSIFBRDADDR: No such device
etho0: unknwon interface: No such device

kjs wrote:I'm also having an issue after upgrading neither eth0 nor eth1 are showing up in /dev .... I think it's due to the switch from devfs to udev...
for the record - network interfaces never show up in /dev - they're not normal devices
edit: I guess I should provide some help...
ifconfig and "ifconfig -a" will list network devices (also in /proc/net somewhere). If you do not have a network device that means that your module is not properly loaded for that device.
This should have nothing to do with a devfs/udev switch and everything to do with a kernel upgrade.
Just for some more info, can you please report the output of:
· lsmod
· uname -r
· ls /lib/modules
· ifconfig -a

Error message saying "new itunes library"

downloaded the latest itunes now when i try to open itunes just get error message saying "new itunes library"

Try this approach:
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
If that doesn't work go into the Control Panel for progams and try to repair the iTunes installation, or remove it and then reinstall.
tt2

Error message after executing KKRC- How to define Hierarchy ID ?

Hi Gurus
Ours is a Chemical Mfg./ Marketing Company. We have ECC 5.0 version implemented in our Company. We have the Production process orders of different types ( Normal Process order , Reprocess Process order etc.). For the purpose of MIS it is our regular practice to download data in Worksheets & then work upon it ( pivot tables etc.) & compile the reports. We have the requirement to have SKU wise ( Finished Goodswise ) summarised compilation of different type of Variances ( both Qty. , value of input materials, wherever applicable) .
While browsing the SAPs BPX community database I have come across the query similar to my requirement . refer thread Product costing - Information system, order summarization
Posted: Sep 30, 2007 3:21 AM
As suggested in the response to that query I have followed the steps .
KKRV followed by KKRC . The error message after executing KKRC reads
No IDs defined for Hierarchy type CO
Diagnosis No Hierarchy id is defined in customising for the hierarchy type you selected
Procedure : go in to the customising and define the structure of hierarchy by means of an appropriate Hierarchy ID.
Can some one give me further leads ( i.e. navigation/path and clues for defining Hierarchy ID)
Or
is there any other way to address the requirement mentioned in opening para.
With best regards
Sudheer

Hi Patrick,
unfortunately I cannot provide an ad-hoc solution for your nested exception without further investigations.
Nevertheless I'm very interested to know, why you "gave up" using the Adaptive WS Model in Web Dynpro. What's the problem?
Perhaps the coding which now requires to create a model instance:
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit() {
//@@begin wdDoInit()
// create a new model instance (1)
EmailAdWSModel model = new EmailAdWSModel();
// create model objects (2, 3)
Request_SendEmail requestMO = new Request_SendEmail(model);
SendEmail emailMO = new SendEmail(model);
// associate model objects (4)
requestMO.setSendEmail(emailMO);
// bind executable model object to context node (5)
wdContext.nodeRequest_SendEmail().bind(requestMO);
//@@end
Regards, Bertram

Unknown error message after I click sign in from the app stort

Hello ,Excuse me if this has already been discussed.
I have been prompted to download a new version of iphoto after discovered it missing my mac pro
I get an "Unknown error" message after I click sign in from the app store to download.
I can't download and I can't find iphoto.
Have I lost all my I photos is one question I have.
Thank you

Your photos should be safe as they are in the Library.
As to the download issue: contact Mac App Store support. There's a link on the right hand side of the Store Window.

IE 8.0 Error Message After New AFP Install

Similar Messages

Maybe you are looking for