Ie 8 - tab shows connecting but does not connect

IE 8...have reset ie properties, rebooted, un-installed and re-installed.   Am able to connect from safe mode w/ networking.   Have tried to download firefox from google chrome, but I get....you are not connected to the internet...hit
OK or cancel.  What other options to get ie working?

My Norton 360 also seems to disappear after I open it and there is no icon in the navigation area.
That sounds like a program which is opening off-screen, possibly on another monitor.  Look at the Taskbar icon involved and see if it has a thumbnail.  If so, hovering over it would show its Preview and clicking on it would switch to it. 
Then you could right-click on the thumbnail to see its window's state, e.g. typically Restore grey and the rest all operational.  Move would allow you to move it.  Since you would not have any obvious way of attaching it to your mouse pointer
you would start by using an arrow key.  In fact, one or two keystrokes would be enough to engage your pointer and change its icon to a move pointer icon.  Then just drag the window to where you want it.
Oh, you mentioned "the navigation area".  Are you implying you never see a window for that feature, e.g. it is always hidden?  What about Task Manager does it know what state the thing is in?  How are you supposed to configure or
check on it otherwise?
FWIW I would definitely be suspicious of Norton as the cause of the blockage.  Unfortunately others have found that trying to disable it in order to avoid its interference is not enough, so then it has to be removed and in some cases apparently the
uninstall is faulty and a cleanup program must be obtained from Norton to be rid of it completely.
Robert Aldwinckle

Similar Messages

  • HT1752 iMac flat panel 2003 shows airport but does not connect

    Hi,iMac flat panel 2003 shows airport but does not connect

    No problems.
    Let's double-check your iMac's Internet Sharing configuration:
    To setup for Internet Sharing (Wired to Wireless):
    Setup the Network
    Cable Modem > (Ethernet cable) > \[Ethernet port] iMac > (wireless) > MacBook
    Enable Software Firewall (iMac)
    System Preferences > Security > Firewall
    o Block all incoming connections (enabled)
    Enable Internet Sharing (iMac)
    System Preferences > Sharing
    o Select "Internet Sharing" from the options in the left column
    o Share your connection from: Built-in Ethernet
    o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
    AirPort Options... (iMac)
    o Network Name: <anything you want>
    o Channel: Automatic
    o Enable encryption <do NOT enable at this time>
    o Click OK
    o Select "Internet Sharing" again
    o Click "Start" to start Internet Sharing
    o Click Start
    Please verify these settings, and try accessing the Internet from the MacBook again. For this exercise, I suggest co-locating the MacBook with the iMac.

  • Why MSAccess database shows data but does not show columns and DDL in edit mode in jdeveloper?

    Sir,
    My developer ver is 12.1.3.0.0.
    I create a connection to MS Access database, this database shows data as bellow in jdeveloper databases window
    But when I open any table in Edit mode like bellow it does not show any columns and DDL and give an error like bellow
    Similarly when I try to create view objects on these tables then on data controls the view object also doesn't show any columns like bellow
    What could be the reason any help on this issue
    Should I use MS Access or not but I want to use ms access for very small databases.
    Regards

    If you look into the certification matrix at Oracle JDeveloper and ADF 12c (12.1.3) Supported Systems
    You'll see that ms access is not supported.
    You can use oracle xe which is free for your project.
    Timo

  • I have several email account setup on iphone.  for one of them can receive from/to emails from phone, but emails sent from computer not received on phone.  phone shows receiving but does not come thru

    I have iphone 4s with several email accounts set up.  For one of these accounts, and only one, test emails sent from phone come thru fine.  But computer generated mail doesn't come to phone.  For test messages phone shows "receiving" but nothing comes to inbox.  External sent mail does not  come to phone inbox, but does to outlook on computer.  Have checked settings and these seem correct.  What's up?  Four other accounts work fine.

    If you can send e-mail when on WiFi from home, but not when on 3G, that indicates your email provider is blocking e-mail being sent from outside their network. This is done to control Spam. ISPs who do this will usually have a separate SMTP server that should be used when using a mobile device. Check with them again.

  • I am having trouble getting my ipad to recognize the sat connection have turned off and back on it shows there but does not load safari

    I am having trouble getting my ipad to communicate with sat connection I have tried turning off and on re installing the sat connection but still cannot get safari to load

    Hello Brenda,
    Thank you for the details of the issue you are experiencing with your iPad.  It sounds like you're not able to access the Internet on your iPad.  I found a couple of resources that will help.
    If you are having trouble connecting to the Internet using Wi-Fi, I recommend the following article:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    If you are not able to access the Internet when connected to a cellular network, I recommend the following article:
    iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS4249
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have a new i phone and pay for gps---it will show directions but does not use a voice - how do i get it to use the voice?

    Just got an iphone and pay for gps---how do i get the voice to work--it shows the directions but doesn't say it.

    If you did not buy one that specifically states it does voice directions-there is nothing you can do.
    Check the app settings, check the app website.

  • HT1338 Mountain Lion stops downloading at 41.3 mb's. Shows calculating and does not move on!

    Trying to download Mountain Lion on a Mac mini and it is stopping at 41.3 Mb's. It shows "calculating" but does not move on beyond that stage! Version 10.6.8 is the current OS... Any suggestions?

    I am having difficulties too!. I have found a way to push it along but don't know if in the end this will eventually succeed and I don't know why I am having to do this.
    For what it is worth.
    But going to the app LaunchPad and clicking on the in progress OS X Mountain Lion download and pausing it momentarily and then clicking it again, I have gotten my download to keep moving along. Again I don't know why and I have had to do this several time to get the download to progress to 3.11GB out of the total 4.37GB. So I'm three quarter of the way thru and about to do the process again to get the apparently stalled download going again.....
    OK. It is again moving along..... now to 3.27GB
    Too me it has the symptoms of the download process finding it has a bad package and repeatly trying again until it stops trying. At that point is just stops. When one kicks it by doing the LaunchPad stop and go, I think it checks finds a problem and restarts the download of the problem packets .... that's my theory....
    My download is now up to 3.79 out of 4.27GB.
    I have been messing with this on three computers in my network for a couple weeks..... This is the furthest I have gotten..... Perhaps I will succeed today....
    BTW - It appears to have stop again at 3.79.... I;m going to play the stop/go game in Launchpad....
    After about aminute it has started downloading again.....
    Now 3.80GB.....
    Perhaps Apple should look more carefully at it's caching servers...... I think they are either timing out connections or somehow making the past never fail Apple Downloaded look pretty advanced compared to this stop and go model....
    I am now up to 4.03 and downloading with about 10 minutes to go....
    Message was edited by: Terry Fundak

  • When I try to sync my music on my iPhone 4 I have a tab at the top that says 'on this iPhone' The music in that tab is always on my phone but does not show in my itunes library.  How can I get it into my library?

    When I try to sync my music on my iPhone 4 I have a tab at the top that says 'on this iPhone'.  This is at the end of all the other tabs like info, ringtones, music etc. The music in that tab is always on my phone but does not show in my itunes library.  How can I get it into my library?  It doesn't sync either.

    The new iTunes has a somewhat different look from the previous version.  You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes.  Or you can adapt to the new look.

  • I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s but does not connect , it shows that it wants to connect , how can you connect this?

    I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?

    http://support.apple.com/kb/ts1538

  • It downloads version 4.1 - but does not install it and always shows this as Firefox 4.0 - Yahoo edition. Moreover the tabs open when I close firefox do not open when I start next.

    Question
    It downloads version 4.1 - but does not install it and always shows this as Firefox 4.0 - Yahoo edition. Moreover the tabs open when I close firefox do not open when I start next. edit
    Details

    Download the official version of Firefox 4.0.1 here: <br />
    http://www.mozilla.com/en-US/firefox/
    Then un-install that Yahoo branded version and install the official version.

  • HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

    Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
    Documents say
    Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
    But I can't see my iPad Mini in iTunes.
    And my  Ipad  (Settings, General, iTunes Wifi Sinc)  shows  a message :" Sync will resume when xxx(my PC with iTunes) is available "...
    Both are in the same network,
      Ipad mini is is plugged in to power
    . iTunes is open on the computer
    what can i Do ???

    Hi Skydiver119,  and tks for four interest.
    I have done exactly as you say, but it does not work for me.
    You indicated  " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
    I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
    I disconnect the wire,
    and my iPad disappears from my iTunes screen.
    in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
    So, I can not sync via wi-fi
    I appreciate if you can help me.

  • My iphone 4S shows up on my computer but does not show up in itunes devices. I have all security

    I just got an iPhone 4S and am unable to get it to show up as a device in iTunes.
    I previously backed up my old iPhone on my Windows 7 PC. When I connect my 4S to the PC it is recognized by the PC but does not show up as a device in iTunes.
    I have turned off all virus protection software & have tried uninstalling iTunes and all associated Apple software. I reinstalled all Apple software with no results in my 4S showing up as a device in iTunes.
    Any help is greatly appreciated.

    Try restarting the AMDS >  iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • TS4062 I can't sync music on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. Suggestions?

    I can't sync music already on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. I've read through all the Help tutorials but none of them say what to do if the sync options don't pop up when you highlight the device.  I've already spent way too much time trying to figure this out and it's driving me crazy!  Thanks for any help you can offer.

    This is correct.  It will not show in finder.  It is not an external storage device.
    The music sync is one way - computer to ipod.  The only exception is itunes purchases.  Open itunes connect ipod, do not sync, click File>Transfer Purchases

  • Carrier issues, Iphone 3gs: Carrier is in the carrier list but does not connect = no service

    Right introduction, I live in the country signal for iphones under 02 in my area is 3-4 bars of GPRS signal. This is plenty to make and receive calls, texts and all that as use home wifi for internet simple. Everything working fine for about a year of having the phone, then did updates and started to see the "no service"  almost all the time and had to place my iphone in a signal spot just to get 1-2 bars and couldn't touch it without dropping out! Basically I could not use it at all and the crap about the signal now showing true signal is rubbish as before i could make calls fine and no drops, but now due to "no service" i can't make any calls or texts or anything. I have a ipod touch when nothing HAS CHANGED other than i can think when the update to 4.0 came along! I have been living with this for almost a year. I have done every possible solution, apple stores, 02 stores, new sim cards (many), every type of phone resetting possible, manually turning off 3g and other settings to turning everything off bar just basic GPRS signal. Network resets everything possible no joy what so ever.
    I have been paying for a year now for a phone that i can't use anywhere other than right next to a signal tower! Yes the phone connects to GPRS, EDGE, 3G when in town but just about. Before these problems i could get max 3G signal in my local town no issues but now struggle to get 1 bar of 3g in a town as well. The problem is I used to be able to use my phone as a phone where i needed to use the phone. Now i can't use the phone anywhere and get drop calls all the time when i do manage to get signal!!!!!!!
    Now i can't even connect to 02, yet at home under a manual carrier search all UK networks appear on the list including 02, I click on 02 and it comes up with the warning "network lost see settings" So my phone CAN find signal but does not connect to 02. This has been the case for a long time now and as stated before several sim cards latter and plenty of trips to apple and changes of phone make NO difference which makes me believe this is a software issue on apple's part. I only started getting these issues when the iphone 4 came out and updated the ios. Now what can i do, i can not downgrade the ios as i never jailbreaked my phone so don't have the files stored that i should to be able downgrade. Apple are offering 0 help with this, all i want to do is smash it to bits as it no longer works as a phone. I have to use a 10 year old nokia to call and actually use my contract that I PAY FOR. I PAID FOR MY PHONE and just after the warranty runs out as well and it seems all a software problem.
    I have searched all over the net to find no solutions to my problems this is a last resort before i do actually smash the thing and I love apple to bits but come on a simple software issue.
    I mean isn't it silly that i can't downgrade my ios and that apple don't support this and yet my issue seems to lie in there update.
    I know that the signal update reworked the algorithm to show true signal XXXXXXXXXXXXXXX um no it doesn't as now i have 0 signal as before i had no problems what so ever with dropping calls and the signal showing right so WHY WHY WHY.
    Please help I am so frustrated with things and need to solve this issue. Please ask anymore questions if you want more details about anything, i need to sort this out please.
    By the way i am running ios 4.3.3 yet bellow in the options this is not stated?? I have been updating hoping that it gets solved but only seems to get worse the more i update.
    Thanks
    James
    Thanks
    James

    Same problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • My ipod will charge but does not show in itunes or windows

    I tried to use my ipod as a disk to transfer my itunes library from my desktop to my notebook (both Dell), now my ipod charges, but does not show up in itunes or on either of my computers. I have used the advice of going to control panel and unchecking the box under power management but that didn't work, CAN SOMEONE PLEASE PLLLEEEEAAAASSSSSSSEEEEEEE HELP ME?
    I have windows xp on one and vista on the other, if that helps.

    This worked for me, don't know if it will for you. Have ITunes open. While IPod is connected to computer press(at the same time) the menu and center buttons until your screen goes black and shows the apple icon then immediately press the forward button. Your IPod should show up. It won't hurt to try it, even if it doesn't work. Hope this is of some help to you.

Maybe you are looking for

  • Can we create a PO then post invoice prior to GRN being performed

    Can you please advise if there is a way to make the following scenario possible: Using t-code ME21N we create a PO for goods or services with limits (using po type NB) We would like to post the invoice and match it to the PO when it arrives even if t

  • Changed settings on my WRT54G, now it seems like it died! Help!

    I was setting up my WRT54G v6 as a second router. I changed the IP address and set it up as a router instead of a gateway. I unplugged the router and plugged it back in, and it is dead. The power light flashes and the DMZ light stays on solid, and no

  • How to install flash player on my system without having admin access

    Hi Team - I am working on my company system. I tried viewing youtube, its asking me to update the flash player and when i tried installing it shows you didnt have admin access. Since i using my company system, i dont know the password for admin. Henc

  • Upgrade problems ongoing ?

    I have been with BT on ADSL2 for the last 6 years and have my phone line with them for 24years, I see we have Infinity here now since March and decided to upgrade the Cab is less than 100m away so expected good speeds. I rang on the 26th July and upg

  • Mac OS Snow Leopard and Windows XP Installation

    Recently I got Snow Leopard and I installed it successfully. Then I used Boot Camp Assistant to install Windows XP which also worked fine but when I restarted, by default it was starting in Windows rather than in Mac OS. Secondly, in Windows, I could