IE 8 / Vista not recognizing submit button

Here is the code for a simple form at http://www.versaframe.com/catalog/button.cfm. When you first visit the page you should see a Review Order button. After pressing the button you should see the text "Review". This form works fine except when using IE on Vista where it does not appear to recognize the Submit button. Also this form works on other servers, so I think it may have something to do with the server configuration. Can anybody help? Thanks!
<html>
<head>
</head>
<body>
<cfif parameterexists(submit)>
Review
<cfelse>
Not Review
<form action="button.cfm" method="post">
<input type=submit name=submit value="Review Order">
</form>
</cfif>
</body>
</html>

Also as a basic start:
Use a client-side browser debugger such as Firebug or Internet Explorer's Developer Toolbar to look at what the client is actually sending and what response is actually received.
Examine any server logs. Set up a test case, tell the IT folks to start the tape-recorder , mash the ol' button, and a few seconds later tell 'em to hit the stop-button on the recorder and send the log snippet to you.
One thing that is absolutely true about a problem like this is: you gotta see it. "Put your eyeballs to it," and when you do, it ought to be fairly obvious. Until then, though, you're just shootin' blanks. There are too many possibilities to "guess."
There are also going to be lots and lots and lots of "red herrings." IE8, for example, is probably a herring. So, probably, is Vista. They may be perfectly valid correlations but it is highly probable that they don't have anything to do with it. They just make it all the more difficult to eyeball "the one clue that cracks the case wide open."

Similar Messages

Windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....aaahhh

windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....as itunes does not pick up the phone I have connected anymore. My ipod synchs fine still and thats over 6 years old!

Hi rubicon7,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this information helps ....
Have a great day!
- Judy

Windows Vista not recognizing ZEN Mi

I upgraded to Windows Vista 32-bit ultimate, and my ZEN Micro is not recognized. I have let Vista search for drivers online automatically, but it finds no solution. Creative says there is nati've support, so why is my ZEN not recognized?

Update:?I downloaded the XP driver and ran it in XP SP2 compatibility mode. My ZEN now shows up under My Computer, however the device is still not recognized by MediaSource, ZENcast, or the playsure sync manager. I get the error "no device connected" even though it is showing up in My Computer and I can view my files. Any ideas?Message Edited by michaelgazin on 04-8-2007:58 PM

Problems with my Form not showing " Submit" button.

Hello.
I have finally managed to load my website thanks to the wonderful help from these forums, however, I now have a new problem!
My form on my contacts page does not display the “ Submit” button even though it clearly shows on my Mac on Iweb.
I have properly copied and written the html snippet, and it only shows people viewing my site on a Mac through Safari, but not on explorer or Firefox on standard PC’s. Why does it not work?
I am only using a form as people have told me by placing just your e-mail as a contact it attracts spam and so on.
Also the pages take a hundred years to load!
Is it possible that I need to reduce the size of the photos? Or, as friends have told me, is it because of my provider?
My website is www.claxtonolives.com.
It seems there is always a problem.
I noticed the olives at the bottom of the page display as a “ boxed “ picture also and each of the boxes do not display properly on the outlets page.
What is going on? As I have mentioned it all looks fine in Iweb on my mac.
Your help would be greatly appreciated!

You will need to make the snippet larger; large enough for Firefox and IE to be able to draw the submit button. Browsers draw elements in different ways and Firefox and IE are known to consume more space on the page to draw elements than all other browsers. In web design WYSI not necessarily WYG.
On the Contact page it's the Google map photo that requires some time to load. When you choose to draw a map instead of a satellite photo, loading time will be considerable less.

Audigy 2 ZS - Vista not recognizing card

I'm hoping someone out there can clear this up for me & I apologize if there's another similar post out there (though I couldn't track it down). I just installed Windows Vista within the past 24 hours. Overall, no major issues, EXCEPT for what seems to be compatibility issues with my Soundblaster Audigy ZS2 card. I installed the latest driver from the Creative support page & that hasn't seemed to work. From the control panel, I tried to go into the soundcard settings & it (the SB Audigy card) isn't even recognized. According to the Creative diagnostics software, it suggests I should pull the soundcard out & re-install it. I haven't tried that yet & since I'm not a computer guru (and the fact I didn't want to put in the time & effort to do this - I CAN do that much!), I was hoping someone that might have had a similar issue can shed some light on what they did to get this resolved. By the way, I am using Dell surround sound (5.) speakers through standard audio jacks (i.e., standard headphone-type jacks) plugged into the back of the PC. Is it a software compatibility issue? Hardware issue? Or will the simple task of "re-installing the card" do the trick (despite my lack of PC knowledge, somehow it doesn't seem like this would help much, since there weren't any issues I?experienced before,?but what do I know....
!). My guess from reading various posts on the forum is it's a case of Creative not developing a driver to support Vista. But if anyone could clear this up, that would be awesome. Thanks in advance for your help!!
JasonMessage Edited by jokersnaces on 04-05-20072:24 PM

I should notate one important item.... The sound (speakers/card/etc) was working fine with Windows XP Media before the installation of Vista......
Jason

TS1538 iTunes 10.6.1.7 and Win/Vista Not Recognizing iPhone 4S!!!

I bought my first iPhone which is a 4s two weeks ago, and the latest iTunes did not recognize it, while Win/Vista recognized it on the drop down list and as a camera. The same iTunes was able to detect iPhone 4 which I bought for my family member. I then connected iPhone 4s to iTunes under WinXP, and it worked fine, so I was totally confused. I submitted the question to Apple iTunes Feedback, and did not receive any reply.
I have used iTunes many years with iPod and iTouch, and was happy with it, but this incident changes my perception of Apple completely!
Eventaully, I did more research on the web, and learnt during the iTunes installation, iTunes did not update the device or USB driver for iPhone 4s!!! It was solved, under Win/Vista, by updating the device driver by pointing to the iTunes directory. My conclusion is this has to be a bug of the iTunes installation process.
Very disappointed with Apple's lack of response. I actually planned to switch to use Mac, but this experience or rather Apple's effort to rectify the problem has changed my attitude towards Apple completely. It is a shame! Or is this their tactic to encourage Win users to migrate to Apple Mac???

I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

Windows Vista not recognizing my new 160GB ipod classic

I'm having a terrible time getting Windows Vista or itunes to recognize my 160GB ipod classic (ipod software version 1.0.3 PC). I've spent the last two days going through the 5 Rs (4 or 5 times, now)... updated all the USB drivers... reassigned my slave drive letter to make sure there's no conflict... nothing is working.
The ipod is seen in the Device Manager as an "unknown device", but that's it.
The "USB Mass Storage Device" and "Apple ipod Controller" are listed under the "Universal Serial Bus Controllers" and all drivers are up to date.
When I try to update and install the driver for the "unknown device", it automaticly searches windows and the internet, but finds nothing. When I point it towards my C:\Windows\System32 folder (as suggested elsewhere) it locates a driver... but encounters an "unknown error" when installing.
Absolutely nothing works! I'm not new to itunes, ipods or working with Windows Vista. This is terribly frustrating as I now have a $350 paperweight! Ironiclly, I just sold and sent off my 5g 60GB (WORKING!) ipod, too!
Ugggggghhhhhhhh!!!
Please, please, please help!

Update: (Not that anything is fixed yet)
Deleting infcache1 (as suggested elsewhere) had no effect... nor did moving around the usbappl.inf files forom the file repository as described here: http://teknobabble.wordpress.com/200...er-a-solution/
Vista just keeps asking for a driver and when I point it towards one... runs into an error when intalling. The hotfix provided adressing this exact issue (http://support.microsoft.com/kb/940199) hasn't worked nad I get an error saying "This update doesn't apply to your system". O Rly!?! Hmmmm... Windows Vista 32... exact same error when mounting my ipod. Sure SOUNDS like it SHOULD!
Tried this fix: http://support.microsoft.com/kb/925196/en-us but actually found the CD/DVD upper and lower filters in a different key: HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}. Still no joy, though. Starting itunes just gives an error message saying it requires the registry entry to burn CD's and asks that I re-install itunes. Attempts to connect prior to reinstalling (since it still runs) have no effect.
Tried restarting itues service http://docs.info.apple.com/article.html?artnum=307078 but it just hangs. Reinstalling and restarting has no effect.
It just kills me that I can see the ipod connected in the Device Manager ("unknown device") and in Computer Management/Storage/Disc Management ("Rmovable Disc 1" with 148 GB).
So frustrating. This is the first problem I've run into with Vista that has stumped me for more than 24-hours and has really got me feeling stupid.

Windows vista not recognizing airport extreme

So I've set up the AirPort Extreme and have created a wireless network to access the internet from my windows vista pc, mac and other apple products (iPod touch, iPad, etc.) and need a little help:
1 - I have the ethernet cable connected from the AirPort Extreme to my pc. I am able to access the internet, but am not able to see the AirPort Extreme on my pc.
2 - My mac is connected to the AirPort Extreme wirelessly, however, I'm not able to see the AirPort Extreme Utility on the mac.
3 - I'd like to set up a file-sharing network between my pc and my mac. What is the best way to do this through the AirPort Extreme?
4 - I've also purchased Apple TV that I will be hooking up to my television to then be able to play home videos that currently reside on both the pc and the mac. Any tips in setting this up?
I'm not the most mac or tech savvy. Any help would be greatly appreciated.
Thanks.

1 - I have the ethernet cable connected from the AirPort Extreme to my pc. I am able to access the internet, but am not able to see the AirPort Extreme on my pc.
To access the AirPort Extreme you would need to use AirPort Utility for Windows. For Windows Vista, you need to use version 5.5.3 of this utility.
2 - My mac is connected to the AirPort Extreme wirelessly, however, I'm not able to see the AirPort Extreme Utility on the mac.
The AirPort Utility is located in the \Applications\Utilities folder on your Mac.
3 - I'd like to set up a file-sharing network between my pc and my mac. What is the best way to do this through the AirPort Extreme?
Regardless of router manufacturer you would configure both the PC and the Mac for file sharing. For the Mac, check out the following Apple Support article. You may also find this Macworld article helpful. Although it was written for Windows XP, it should work just as well for Vista.
4 - I've also purchased Apple TV that I will be hooking up to my television to then be able to play home videos that currently reside on both the pc and the mac. Any tips in setting this up?
The Apple TV works best when streaming from the Internet. However, it does support some streaming from a local network device. Primarily you would stream from iTunes.
As far as set up, the Apple TV is relatively simple. Basically just plug it into power and connect it to your TV using an HDMI cable. The Apple TV is a minicomputer with built-in network connectivity (both wired and wireless). You configure the Apple TV through its menu interface that will be displayed on your TV set.

Help! Windows Vista not recognizing Nokia C5

Hi,
I just purchased a New Nokia C5-00 5 days back but i am not able to synchronize it with my PC. Everytime I connect my phone with the PC using the provided CA-101D data cable, nothing pops up on the phone screen to select PC Suite or Mass Storage etc.. Neither my PC recognizes the phone.. Not even the usual USB connectivity sound..
My old Nokia E51 simply works fine as soon as I plug it into the USB..
I have checked the settings. i.e. Menu>Settings>Connectivity>USB
USB Connection Mode: PC Suite
Ask on Connection: Yes
I even updated the Nokia PC Suite, later uninstalled it and cleaned files using Nokia Cleaner.. Then also installed the Ovi Suite 2.2 but no help.. Again my old E51 works good with both the suites..
Later on I even restored factory settings too but it is not working either..
Plz help in this regard.. What can be wrong? I'm using Windows Vista Ultimate..

can't use e51's data cable as it is dke-2 and connection port is different..
no, even mass storage is not working.. i got two ca-101d cables, one i got with c5 and one old one of my 5130xm, but none works..

Windows vista not recognizing internet on my mac

I just recently installed boot camp and windows vista. Windows opens fine and seems everything is okay but it does not see my wifi (or any other network for that matter). I plugged in an Ethernet cable to my modem and it doesn't recognize that either. I have to update vista before it will let me run a program, but i cant update with no Internet connection.
suggestions please.
*the modem is on and works fine, when i go back to using mac the Internet works. I have a 2011 13 inch macbook pro. please give detailed help. I'm not to pc savy

Same prob..my iphone doesn show up in my computer..autoplay also doesn starts..n it shows apple mobile in device manager..but does sync with itunes soo i cn backup stuff but cant transfer images from my iphone..plz help..thnx in advance

Windows vista not recognizing one of my iphones!!! wont import photos pleas

i have windows vista home. i have two iphones and my bf has one. mine show up in the autoplay under devices and autoplay does start and import new photos when my iphones are plugged in . his iphone is never listed under devices in autoplay, never imports photos, but it does show up in itunes and will also backup and sync to his itunes, but lately has had an error message come up saying he does not have enough privilages to syn his iphone...im not sure what is going on i have restarted computer , reinstalled everything having to do with itunes. and when i plug his phone in it locates and installs the driver but has had lots of problems in the past. his iphone only shows up as a usb device not as a portable device and mine show up as my "name" iphone...his never shows his name for his iphone...please help

Same prob..my iphone doesn show up in my computer..autoplay also doesn starts..n it shows apple mobile in device manager..but does sync with itunes soo i cn backup stuff but cant transfer images from my iphone..plz help..thnx in advance

Vista not recognizing IPhone as camera....

Well, my IPhone and Vista worked fine a couple days ago but now, Windows doesn't recognize IPhone as a camera, so i can't get my pictures off it as easily.
http://sleekupload.com/uploads/untitled_83.jpg
The link above is Vista trying to install drivers but failing. It was working fine before but it just...stopped.

First connect open iTunes and connect your iPhone to your computer then follow the steps below
1. Hold down the Windows Key and press R.
2. Type devmgmt.msc and click OK.
3. Right-click Apple Mobile Device listed under Other Devices and then select Properties.
4. Select Browse…
5. Point it to C:\Program Files\Common Files\Apple\Mobile Device Support\drivers and click OK.
6. Disconnect your iPhone close iTunes then reconnect your iPhone and try again
The install should finish and your iPhone should now be all good.
If this does not work
Quit iTunes if it is open
From the Start menu select the Control panel
In Windows XP, choose Add or Remove Programs, then click Remove. Also remove any other items with the word “iTunes” in their names. Also remove any iPod-related entries.
Restart your PC.
Delete the iTunes program itself, if it still exists after the steps you’ve already taken (by default it’s located in the “Program Files” folder)
Again restart your PC.
Download the latest version of iTunes for Windows and install it.

Enable Submit Button at User Level and Disable at Block Level

I developed a query_find form having empno field:
Once the Employees‘s data is returned, then the new form that opens up should have the following fields.
Employee Name
Employee Number
Salary
Address
Notes
and submit button.
i have taken Employee Name,Employee Number,Salary,Address,submit button in xx_emp block.
and i have given Query Data Source as xx_EMP_v view.
and Notes related to xx_dum_emp block and for this query data source as xx_emp_details table(here notes field is contorl item)
And i have written the following code in the submit button
IF :xx_dum_emp.NOTES IS NOT NULL
THEN
INSERT INTO xx_emp_details
(employee_number,
employee_id,
employee_name,
address,
salary,
notes
VALUES (:xx_emp.employee_number,
:xx_emp.employee_id,
:xx_emp.employee_name,
:xx_emp.address,
:xx_emp.salary,
xx_dum_emp.notes
END IF;
commit;
I have taken all the fields in the same canvas.
Requirement:
Submit Button should be enable for the specific user.For other users it should be in disable mode.
so i have written code in POST_QUERY of the calling block as below:
IF l_name = 'TESTUSER'
THEN
SET_ITEM_PROPERTY ('XXMZ_EMP.SUBMIT',
enabled,
property_true
ELSE
SET_ITEM_PROPERTY ('XXMZ_EMP.SUBMIT',
enabled,
property_false
END IF;
It's working fine.
Suppose i query with empno 10 it will return Employees‘s data.So in that form i just enter some text in the Notes field
then click on submit.then close the form.again query with the same number then i need to disble Submit button at this level.
Is it possible to Disable the Submit Button?

Hi Dhana;
If your issue about Forms Customization please follow below and see its helpful:
Subject: Customization in Oracle Applications Doc ID: 743490.1
Subject: Forms Customization Doc ID: 69995.1
Subject: Setup & Usage (Customization) Doc ID: 104697.1
Please see "Oracle Developer Guide" available at:
Applications Releases 11i and 12
http://www.oracle.com/technology/documentation/applications.html
Also see:
http://oracle.anilpassi.com/forms-customization-steps-in-oracle-applications.html
http://oracle.anilpassi.com/a-new-custom-form-in-oracle-apps.html
I hope those are can be helpful for you
Regards
Helios

Can I send 2 separate emails from one Submit Button?

Have a referral form that an employee completes referring a candidate for a specific position.
Fields are: EmployeeName, EmployeeEmail, Candidate, Position, ReqNo.
I created a submit button (used regular button and changed it to a submit and entered an email address). The form is sent to this email address in a PDF format. This works great.
Now at the same time I would like send a message to the employee acknowledging that we have received their referral -utilizing their email address from the form.
Is there anyway that I can combine both of these actions on the Submit button I already have created?

To do so i guess you could use this to send an email in ur regular button (not a submit button) in the click event
var oDoc = event.target;
                                   oDoc.mailDoc({
                                         bUI: false,
                                         cTo: "Email here!",
                                                                           cCC: "",
                                                                           cSubject: "Insert Subject Here!",
                                                                           cMsg: "Before submiting the email, include attachments 1, 2 and 3:\n"
and then you can resend an email again with the code above repeated

Cannot Change Identities / Email where Submit button emails responses to

I have created, entiriely, in LiveCycle a form. When it is distributed it AUTOMATICALLY inserts my own email to where the repsonses go to. Cannot - REPEAT CANNOT- Alter it.
THIS IS NOT THE SUBMIT BUTTON THAT YOU PUT INTO A FORM.
This is the "Submit" that is automatically generated and put into the PDF TAB when a form is distributed.
I've gone into Acrobat / LiveCycle and changed "identies" but the response STILL goes to my Email. It NEVER picks up my changed Identity - and shows my own email and not the one I want responses sent to.
Rebooted after chainging Identities - STILL goes to my email.
Edited in the Acrobat - STILL - goes to my email - SUBMIT button (automatically created when you distribute the form) ALWAYS says to send to my email.
Edit the options/properties to change - MY EMAIL IS GREYED OUT AND CANNOT ALTER IT IN THE DISTIBUTON panel where you can select options as how the form is distrubited - selecting EMAIL response to form submission.
It ALWAYS SHOWS my Active Directoy LOGON ID as the form OWNER - CANNOT CHANGE IT.
We are IN an Active Directory environemnt and my logon account has NO RIGHTS to change MASTER registry Win7 entries at all - only (like normal) my own preferences - BUT LIVE CYCLE / ADOBE DOES NOT CHANGE ANYTHING with email at all concerning the auto email sent to portion. I can change "sent by" but NOT who I want responses sent to.
Cannot FIND at all any XML preferences file in registry / file system to hack and manually change it.
You look at the XML data in the form and it shows my email address - AND ALL XML data is BLOCKED from being edit at all in the form - and NO idea where it is pulling this information from.
Is there ANY WAY at all to change --- WITHOUT WRITING ANY CODE - to alter where a distributed form is to send email repsonses to.
CANNOT, REPEAT CANNOT - use any cloud, online or any external source at all. Cannot use Acrobat.com.
Thanks,
Tom

The email address is coded into the server script file that processes the form data.
Look for the below file on the server and see if you can open it and locate the email address. It's a Cold Fusion file
act_email.cfm

IE 8 / Vista not recognizing submit button

Similar Messages

Maybe you are looking for