IE Automatic Component Activation Now Available

So apparently Microsoft has settled their issues with Eolas and Active X. What does that mean for AC_Quicktime javascript files?
Ed

Yes.
We changed our page code to accommodate Internet Explorer (again) in 2006.
The ancient "embed" tag code is deprecated (dead) although most browser still support its use.
The "object" tag code should still work in most modern browsers (as will the newer javascript method) as long as the correct parameters are set.
Object code is all we should really need and, if IE for Windows now makes this redundant, then we are that much better off.
The real trouble is that we don't know what browser may find our pages and we must compromise to include them all.
The javascript page code has fixed most issues and I have no plans to re-write my ten year old files yet another time.

Similar Messages

HT1849 I have received notification that the "Complete My Album", Music Speaks by Candice Glover is now available to download. I have three devices that are all enabled to receive automatic downloads. My problem is the same on all three devices. Only

I have received notification that the "Complete My Album", Music Speaks by Candice Glover is now available to download. I have three devices that are all enabled to receive automatic downloads. My problem is the same on all three devices.
Only 0.05 minutes download on each song with the exception of the original song purchase: I Am Beautiful. What needs to be done to solve this problem?

It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
Hopefully anyone else else who has this issue in the future will be able to find this.

HT201317 i have recently installed icloud on my pc & have activated photo stream on my iphone. only a portion of the photos from my phone are now available on my pc. Why haven't they all transferred over?

i have recently installed icloud on my pc & have activated photo stream on my iphone. only a portion of the photos from my phone are now available on my pc. Why haven't they all transferred over?

When you turn on photo stream on a device that is the source of photos, only the photos you take in the future will sync to the stream, not the photos currently in the camera roll.
When you turn on photo stream on a device or computer that will receive photos from other devices, only the photos that have been on the servers for the past 30 days will sync, all older photos have been deleted from the servers.
To sync camera roll photos that weren't part of photo stream, you need to sync them manually using itunes.

New version of the LabHSM Toolkit for Complex Event-Driven Development is Now Available!

A new version of the unique toolkit is now available for download. As announced earlier, LabHSM makes it possible to easily create and then maintain complex event-driven applications in LabVIEW as a collection of HSM-driven active object VIs using a higher level of abstraction and agile software development methodologies. These active object VIs are created based on a universal Hierarchical State Machine ( HSM or statechart ) template. Therefore, all your code looks similar regardless of its functionality!
So, what’s new in version 1.1?
• "No hands" block diagram modifications! Version 1.1 actually creates, renames, and removes actions on the block diagram as you define, rename, and remove them in the editor! (No, it can't fill in all the details for you, but it can do some, if you think ahead, by replicating similar actions.)
• Two new screens, Events Usage and Actions Usage, (available in licensed copies only) clearly show where (in which state(s)/transition(s)) and how (is it an entry action, exit action or event handling action?) a particular event or action is used. Moreover, if after selecting an instance on the list, the Go To button is pressed, it makes the main screen jump to respective location in the HSM structure. In the case of Actions Usage screen, the respective action is also displayed on the block diagram. Thus, these screens provide two more different cross-sections of the HSM data set and two additional ways to navigate it – now along the Actions and Events dimensions too instead of just the state tree in the first version.
• Version 1.1 can duplicate events or actions, which helps when you've got several that are similar. Changes in the events and actions lists are reflected immediately on the main screen and on the block diagram (which solves the previous problem of deleting a renamed event or action when it's still in use).
• The Events and Actions List Editors are no longer modal and neither are the Events and Actions Usage screens, so you can have all the panels and the block diagram visible and move freely among them as you build your HSM (a good argument for an even larger monitor).
• When you save an HSM file, version 1.1 automatically adds the .hsm extension if you leave it out and it remembers the last directory you used.
• The Loaded VIs utility now can open and close block diagrams (if they are not protected with a password) and display only VIs with modal front panels, if desired—useful for quickly finding and closing accidentally opened (e.g., from the hierarchy window) modal VIs. Make a modal version of this utility and keep it on the Desktop for this purpose.
• A new example of a simple hierarchical state machine and two more excellent tutorials from Paul F. Sullivan (SULLutions.com) are included into the package. The tutorials are also available online. The overview article has also been extended.
As before, the LabHSM toolkit is available for UNLIMITED PERIOD trial. Please visit http://www.labhsm.com for details and download. The site also contains references which you may want to check to learn more about hierarchical state machines and active object computing.
Stanislav Rumega
NI Certified LabVIEW Developer
H View Labs
http://www.labhsm.com
[email protected]
US Toll-Free Phone/Fax: 877-570-8684

I am not really sure if Azure support this but its worth to make your configuration file to support .NET 4.0
$PShome\PowerShell_ISE.CONFIG and $PSHOME\PowerShell.exe.config will be not existing.
So you can make an entry in configuration to support .NET framework 4.0
like shown below
$config_text = @"
<?xml version="1.0"?>
<configuration>
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0.30319"/>
<supportedRuntime version="v2.0.50727"/>
</startup>
</configuration>
$config_text| Out-File $pshome\powershell.exe.config
$config_text| Out-File $pshome\powershell_ise.exe.config
Close PowerShell Console and open as administrator.
Try loading the modules back and let me know.
Regards Chen V [MCTS SharePoint 2010]

Native Adobe Content Viewer for Android is now available!

The native Adobe Content Viewer is now available in Google Play for your downloading pleasure. Grab it here: https://play.google.com/store/apps/details?id=com.adobe.dps.contentviewer. The legacy air viewer is still available at https://play.google.com/store/apps/details?id=air.com.adobe.contentviewer.
Note that in this first release your sign in will automatically expire after 30 minutes. We realize this is a bit of a pain but wanted to get the viewer out for people rather than waiting even longer to add auto-renew of the credentials. We’ll get this taken care of with our next update, due in about three weeks.
Enjoy!
Neil

Installation works flawlessly. So far I've only been testing with the normal desktop preview. Now I wanna try the preview function for android (I think the previous version didn't work, right?) from the folio overlay panel but I cannot seem to find my Nexus 10 device even though I am logged in with the same account on both InDesign and the Nexus 10. Any ideas what I could be doing wrong?
Nevermind I got it to work. But how do I update my folio once I uploaded it to the folio producer?
Also there's something that I'd like to achieve now.
The content viewer browser version (checked via whatismybrowser.com) is:
Chrome 30
Version 3.0.0.0
Webkit 537.36
The installed chrome is:
Chrome 32
Version 32.0.1700.99
Webkit 537.36
The 32 version has WebGL enabled or rather it works better. By default only the normal WebGL features are enabled in Chrome. The experimental WebGL features (found under chrome://flags/) have to be activated manually. I suppose the WebM view of the viewer doesn't have these enabled. Can I enable these fancy features somehow?

Oracle SQL Developer 1.2 Patch 1 (1.2.1.32.00) is Now available

Hi,
I have just posted the announcement that the latest patch release for SQL Developer is now available. The updated Check for Updates should be available from 1pm PST (16 Aug). So if you are ahead of the game, please give this another hour.
The Check for Updates does an automatic restart of SQL Developer, but you still need to do a second restart or you will not see the SQL Worksheet.
Finally we have updated the Statement of Direction with the main themes we plan to address in the next release.
For all document and download links, please see the main SQL Developer page on OTN.
Regards
Sue

Hi,
I have just posted the announcement that the latest patch release for SQL Developer is now available. The updated Check for Updates should be available from 1pm PST (16 Aug). So if you are ahead of the game, please give this another hour.
The Check for Updates does an automatic restart of SQL Developer, but you still need to do a second restart or you will not see the SQL Worksheet.
Finally we have updated the Statement of Direction with the main themes we plan to address in the next release.
For all document and download links, please see the main SQL Developer page on OTN.
Regards
Sue

Oracle JHeadstart 10g release 9.0.5.1 now available!

All,
Oracle JHeadstart 10g Release 9.0.5.1 is now available. More than a month ago Oracle released Oracle JDeveloper 10g (9.0.5.1). This new JHeadstart release is certified against both JDeveloper 9.0.5.1 and 9.0.5.2. You can now benefit the strong combination of the new versions of Oracle JDeveloper and JHeadstart.
What is Oracle JHeadstart?
JHeadstart is a development tool kit, fully integrated with JDeveloper, that enables rapid component based development of J2EE applications using the Model-View-Controller (MVC) design pattern. It provides customers with 4GL-like productivity without jeopardizing the flexibility and openness of the J2EE architecture. In addition it includes a bridge from Oracle Designer that enables customers to generate fully functioning J2EE applications from Oracle Designer or to migrate Oracle Forms to J2EE.
What is new in this release?
In addition to the certification mentioned above this release includes the following new features:
- Support for Oracle TopLink, adding extra flexibility.
- A Tutorial that describes and a demo application that shows how to use JHeadstart in conjunction with TopLink based on multiple project experiences.
- Links from the Applications Structure File editor to both the BC4J property editor as well as the JHeadstart Application Generator which streamlines the development process.
- Pop-lists for regions and domains to prevent typing errors
- Generation of regions in JSP pages
- Fixes, for a complete list of fixes please refer to the release notes.
Where to download?
This maintenance release can be downloaded from the supplement option portal ( http://cso.oracle.com/ ) for customers that hold a supplement option license. It will be available for evaluation purposes on OTN later on.
Where to go for more information?
For more information go to the JHeadstart Product Center on OTN http://otn.oracle.com/consulting/9iServices/JHeadstart2.html.
Regards,
Ton van Kooten
JHeadstart Team
Oracle

We already purchased the Jheadstart supplement option, but our Oracle Consulting sales contact didn't have walked us through the registration process in before. I had contact them and ask them to assist us, but they need some work days. so could you help me to download JHeadstart 10g release 9.0.5.1 as soon as possible. our project schedule need this released version in hurry.If you can help me please give me a notice, thanks a lot.
my email address:[email protected]

Automatic Duck is now offering their plug-ins for free

Automatic Duck is now offering their plug-ins for free! Go here to pick up the plug-ins:
http://bit.ly/tDvNRW
From Wes and Harry:
October 28, 2011
If you missed our mail last month you should check it out as it got a lot of people talking. Today we have a follow-up.
Our web site has relaunched* and while the overall look of the site is similar there is a dramatic difference in how we are distributing our plug-ins.
Starting today Pro Import AE, Pro Import FCP and Pro Export FCP (both versions, for FCP7 and FCPX) are available at no charge. You read this right. Free.
We are unable to provide support at the same level as we have over the years, but we didn't want these plug-ins to go away while they remain useful. So if you can make use of these plug-ins in your projects, enjoy!
Thank you to all of our users, working with you for the last 10 1/2 years was a truly wonderful experience.
- Wes and Harry

I don't have anything to add to my original reply - http://forums.adobe.com/thread/1433512. Which bit didn't you understand? And no, you don't need a folder for kaleidoscopes - you just put it in the filters folder as I originally told you.
And here's a kaleidoscoped sunflower
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Xcelsius 2008 SP3 is now available

Xcelsius 2008 SP3 Release Notes UPDATED Feb 2010
Just in time for the holidays!
Xcelsius 2008 SP3 is now available from Service Marketplace and the support download site: SAP Crystal Solutions Downloads
We hope you enjoy the great new features we have added. For details check out our Whatu2019s New document and these blogs:
u2022     http://everythingxcelsius.com/2009/12/top-10-xcelsius-2008-sp3-enhancements.html
u2022     http://timoelliott.com/blog/2009/12/what%E2%80%99s-new-in-sap-businessobjects-xcelsius-2008-sp3.html
Make sure you download the self extracting file and run it from your hard drive.
Please be patient when you run the self extracting file as it silently extracts all of the necessary files and then automatically runs the Xcelsius 2008 SP3 installer which can take a few minutes. The install files are extracted to the C:Temp folder along with the other CD files including: documentation, connectivity and portal integration kits.
SP3 is cumulative patch so incorporates all the patches to-date and delivers new fixes and features, therefore Xcelsius 2008 SP1 and SP2 are no longer available. Customers looking for fixes shipped with SP1 or SP2 should download and install SP3.
Note: The Enterprise patch is for all versions of Xcelsius 2008 except Xcelsius 2008 Present which has its own patch
The documentation is available from the SAP help portal. You can search for the Xcelsius guides here: http://help.sap.com/businessobject/product_guides/ and they include:
u2022     What's Fixed in Xcelsius 2008 Service Pack 3
u2022     What's New in Xcelsius 2008 Service Pack 3
u2022     Xcelsius 2008 Installation Guide
u2022     Xcelsius 2008 SP3 Release Notes    UPDATED Feb 2010
u2022     Xcelsius 2008 SP3 User Guide
u2022     Xcelsius 2008 SP3 Supported Platforms: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50fdb3d2-50cc-2c10-e392-a2e481f71694?quicklink=index&overridelayout=true
Regards
The Xcelsius Team
Please also see the Xcelsius Product Portal: https://www.sdn.sap.com/irj/sdn/crystalreports-xcelsius
Before posting on this forum please refer to the Xcelsius Forum Rules of Engagement: Welcome to the Xcelsius forum & Rules of Engagement

Hi,
when will IE8 be supprted with Xcelsuis 2008? I am having the problem that no new Connections (e.g. QaaWS) can be created... Thanks for a quick answer.
Best regards,
Simon.

10.1.0.3 Patchset Now Available

The 10.1.0.3 patchset is now available on Metalink for Microsoft Windows and Intel Linux. From a brief glance at the rest of the platforms it doesn't appear to be out yet for the Unix platforms.
Can anyone from Oracle let us know if there's any changed/improved functionality from an OLAP point of view with the 10.1.0.3 patchset? One thing I do know is that Discoverer Plus OLAP (aka Drake) requires 10.1.0.3, but is there anything else in the patch that should interest us?
thanks
Mark

A few comments...
1) I urge all OLAP 10g users to apply the OLAP 10.1.0.3.0A patch (PS# 3769360) to their 10.1.0.3.0 databases. Do not run OLAP without it. Currently the patch is only available on Windows. Linux and HP-UX should be available soon.
2) Be sure to patch both the Oracle Database Server and Client with the RDBMS 10.1.0.3.0 and OLAP 10.1.0.3.0A patches. Analytic Workspace Manager is found on the Client. So if you fail patching AWM, it will become out of sync with the Server and will not work.
3) Any new functionality with AWM 10.1.0.3.0A? Users are no longer required to manually enable the analytic workspace for query by the OLAP API. Dynamic enablement automatically creates compatible SQL views over the analytic workspace even if you change the logical model.
4) Does AWM 10.1.0.3.0A use AWXML? Yes, however only for the query access. The building processing has not changed. With the upcoming 'AWM2' (10.1.0.3.0B), this will completely change over to AWXML.
AWM2 will allow you to go directly from Oracle relational source tables or views to a multidimensional analytic workspace, without the previous prerequisites of creating ROLAP objects. Simply define and alter the logical model within AWM2 and see your results instantaneously. Easily create calculated measures with sophisticated, custom aggregations, etc...
Currently the OLAP 10.1.0.3.0B patch and corresponding AWM2 has a GA of September 30th.
5) Will the OLAP 10g docs be updated for 10.1.0.3.0/10.1.0.3.0A/10.1.0.3.0B? Yes, the Javadoc for the OLAP API and AWXML has been updated for 10.1.0.3.0. The OLAP DML Guide is being be re-edited and should be available within a week. The OLAP Reference and App Developer's Guide are being overhauled for 10.1.0.3.0A and will be available by the end of the month. Then again for 10.1.0.3.0B, the App Developer's Guide will be updated.

Kodo 3.4.0 now available

Hi,
Kodo 3.4.0 is available now! Get your copy at
http://solarmetric.com/kodo/releases/3.4.0
* Query cache now caches aggregates and projections, including queries
that use grouping
* Added support for savepoints, with both in-memory and JDBC3 plugins.
* Added support for Oracle Object fields through JDBC SQLData interfaces.
* Improved thread and socket support for TCP RemoteCommitProvider
* Better support for large transactions, including several optimizations
in the datastore cache when using large transactions
* Improvements to reverse mapping
* Improvements to unicode support for Oracle
* Improvements to performance of attaching of object graphs
* Improvements to exception handling and reporting
* Tangosol plugin supports query cache
* Added a new ManagedRuntime for improved integration with BEA WebLogic
Server. It is automatically used when using WLS.
See http://docs.solarmetric.com/relnotes.html for full release notes.
Enjoy,
-Patrick

Stephane & Alex-
Kodo 4.0.0 ships with the final JDO 2.0 jars, but it is not yet a
complete JDO 2 implementation.
We do still intend to complete JDO 2 compliance in the near future, but
as of 4.0.0, Kodo is still officially a JDO 1 product.
Stephane Bouchet wrote:
Another question :
Is the final release will be compliant with the last (and final) JDO 2.0 API ?
It seems it is not the case for the current release.
Cheers,
St?phane
Alex Roytman a ?crit :
Hi Mark,
Is any work done on JDO side of the product? If I am not mistaken the list
of outstanding JDO issues has not changed for quite a while. Are you
planning to release the product without addressing them?
Thank you
Alex
"Marc Prud'hommeaux" <[email protected]> wrote in message
news:[email protected]..
All,
Kodo 4.0.0 RC 3 is now available. This release candidate of Kodo 4
implements the JDO and EJB 3 Persistence specifications. You are
invited to download it at:
http://www.solarmetric.com/Software/beta/4.0.0RC/
You can find the release notes at:
http://solarmetric.com/Software/Documentation/4.0.0RC3/docs/full/html/relnotes.html
The full documentation can be found in the distribution, and also at:
http://solarmetric.com/Software/Documentation/4.0.0RC3/docs/full/html/index.html
Please report any issues that you find to the Kodo beta newsgroup
(bea.kodo.beta).
Good luck, and enjoy!
Marc Prud'hommeaux
BEA, Inc.

Kodo 3.0.0 beta now available

All,
Kodo JDO 3.0.0 beta 1 is now available at:
http://solarmetric.com/Software/beta/3.0.0/
Kodo JDO 3.0.0 is a major release, and contains significant changes to
properties, mapping information, and Kodo-specific APIs. To read more about
these, and to read about how to convert a Kodo 2 project to Kodo 3, see the
migration documentation at:
http://solarmetric.com/Software/beta/3.0.0/b1-docs/docs/kodo2.html
NOTE: the conversion is non-trivial, so we have provided a number of tools
to automate most of the process. So please read and obey the migration
documentation, which will guide you through the migration tool process.
For details about some of the major new features in this release, please
read the release notes at:
http://solarmetric.com/Software/beta/3.0.0/b1-docs/docs/relnotes.html
The full documentation is available online at:
http://solarmetric.com/Software/beta/3.0.0/b1-docs/docs/index.html
Some of the major new features include:
* New mapping system, providing more powerful and flexible mapping options.
* More configuration options for connection pooling.
* Configurable eager fetching of 1-1, 1-many and many-many relations.
Potentially reduces the number of database queries required when iterating
through an extent or query result and accessing relation fields of each
instance.
* More optimized SQL batching.
* Simplified package structure for Kodo-specific APIs.
Known issues:
* DB2, Informix, and Sybase do not fully pass our internal tests yet. Sybase
is close to passing, and DB2 and Informix probably work in many situations
as well, but they are not yet officially supported by this release.
* We have done only limited integration testing with application servers.
* Our IDE integration components are not included in this release.
As usual, please discuss any issues, desires, etc. on the beta newsgroup:
news://news.solarmetric.com/solarmetric.kodo.beta
Enjoy,
- Greg
Greg Campbell
SolarMetric, Inc.

1. I can't see any standalone GUI tool to do mapping tasks, as you have
ever announced.The GUI will have its own beta program and release schedule.
2. the file : <kodo3.0>/samples/jsp/build.xml has a line wrong:
<fileset dir="../../../lib/">
should be:
<fileset dir="../../lib/">Thanks!

Xcelsius 2008 Fix Pack 3.1 (FP3.1) is now available

Xcelsius 2008 Fix Pack 3.1 (FP3.1) is now available from Service Marketplace and the support download site: SAP Crystal Solutions Downloads
This Fix Pack must be applied to Xcelsius 2008 SP3 (version: 5.3.0.0): Xcelsius 2008 SP3 is now available
The Xcelsius Present 2008 Fix Pack 3.1 patch is for Xcelsius 2008 SP3 Present only.
The Xcelsius Enterprise 2008 Fix Pack 3.1 patch is both for Xcelsius 2008 SP3 Engage and Enterprise.
Make sure you download the self extracting file and run it from your hard drive.
Please be patient when you run the self extracting file as it silently extracts all of the necessary files and then automatically runs the installer which can take a few minutes.
After you have applied the Fix Pack the version number in the about box will be version: 5.3.1.0
The documentation is available from the SAP help portal. You can search for the Xcelsius guides here: http://help.sap.com/businessobject/product_guides/ including:
u2022 What's Fixed in Xcelsius 2008 Fix Pack 3.1
u2022 Xcelsius 2008 Fix Pack 3.1 Release Notes
Regards
The Xcelsius Team
Please also see the Xcelsius Product Portal: https://www.sdn.sap.com/irj/sdn/crystalreports-xcelsius
Before posting on this forum please refer to the Xcelsius Forum Rules of Engagement: Welcome to the Xcelsius forum & Rules of Engagement

Hi,
when will IE8 be supprted with Xcelsuis 2008? I am having the problem that no new Connections (e.g. QaaWS) can be created... Thanks for a quick answer.
Best regards,
Simon.

GroupWise Mobility Service 2.0 now available

We're pleased to announce that Novell GroupWise Mobility Service 2.0 is
now available. This release, which replaces the former Novell Data
Synchronizer Mobility Pack, includes the following enhancements:
Performance and scalability improvements, and support for more than
1,000 devices per server
ActiveSync 12.1 protocol support
Mobility Service Monitoring Dashboard, showing real-time stats for the
overall system, for each sync agent, and for particular users and
mobile devices
Task synchronization
New address book administration options
Support for the upcoming version of GroupWise, releasing as GroupWise
2014 and code-named Windermere, including Active Directory support
through GroupWise provisioning
Support for the latest mobile device platforms like iOS7, Android 4.3,
Windows 8 and BlackBerry 10
Support for SUSE Linux Enterprise Server 11 SP3
AutoDiscover support for iOS and Windows 8 devices
And much more
Novell GroupWise and Novell Open Workgroup Suite customers with current
maintenance are entitled to this release which is available for
download here.
https://download.novell.com/Download...d=xWnnbrV7Xic~
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

Joseph,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Kodo JDO 2.5.0 now available

All,
Kodo JDO 2.5.0 is now available. Thanks, everyone, for helping out
throughout the 2.5.0 public beta period. You're all great.
You can get Kodo JDO 2.5.0 at:
http://solarmetric.com/Software/Purchase/download.php
Major changes include:
- Major query modifications. Unbound variables are now supported,
Collections can be used as parameters in queries, and several SQL
inefficiencies have been addressed.
- Custom fetch group support.
- Kodo now supports incremental flushing of data to the database.
This can be useful in EJB environments when using container-managed
transactions, in order to handle any flush-related exceptions
within the bean code. It can also be useful in conjunction with
Kodo's automatic flushing capabilities to accelerate querying when
the javax.jdo.option.IgnoreCache property is set to false.
- Added JDOException subclasses for certain interesting exception
types: OptimisticLockException and ObjectNotFoundException.
- Enhancement-time metadata enhancement has been improved. This means
that you may see some errors the next time you re-enhance your
project, but that's for the best -- they were errors anyways.
- Data caching framework now caches JDOQL query results as well as
persistence-capable data. This provides dramatic acceleration for
commonly executed queries.
- The data caching framework has been reworked to separate out the
data cache capabilities from the remote event notification
capabilities. As a result, 2.5.0 data cache configuration is not
compatible with earlier data cache configuration, and custom cache
extensions will likely need some level of revision. For details,
see the release notes in the Kodo JDO Developer's Guide.
For more details, see the Kodo JDO Developer's Guide and the full release
notes, available at:
http://solarmetric.com/docs/2.5.0RC3/docs/index.html
http://solarmetric.com/docs/2.5.0RC3/docs/relnotes.html
Enjoy,
-Patrick
Patrick Linskey
SolarMetric Inc.

Minor correction:
http://solarmetric.com/docs/2.5.0RC3/docs/index.html
http://solarmetric.com/docs/2.5.0RC3/docs/relnotes.html
The 2.5.0 final docs are actually at:
http://solarmetric.com/docs/2.5.0/docs/index.html
http://solarmetric.com/docs/2.5.0/docs/relnotes.html
In article <[email protected]>, Patrick Linskey wrote:
All,
Kodo JDO 2.5.0 is now available. Thanks, everyone, for helping out
throughout the 2.5.0 public beta period. You're all great.
You can get Kodo JDO 2.5.0 at:
http://solarmetric.com/Software/Purchase/download.php
Major changes include:
- Major query modifications. Unbound variables are now supported,
Collections can be used as parameters in queries, and several SQL
inefficiencies have been addressed.
- Custom fetch group support.
- Kodo now supports incremental flushing of data to the database.
This can be useful in EJB environments when using container-managed
transactions, in order to handle any flush-related exceptions
within the bean code. It can also be useful in conjunction with
Kodo's automatic flushing capabilities to accelerate querying when
the javax.jdo.option.IgnoreCache property is set to false.
- Added JDOException subclasses for certain interesting exception
types: OptimisticLockException and ObjectNotFoundException.
- Enhancement-time metadata enhancement has been improved. This means
that you may see some errors the next time you re-enhance your
project, but that's for the best -- they were errors anyways.
- Data caching framework now caches JDOQL query results as well as
persistence-capable data. This provides dramatic acceleration for
commonly executed queries.
- The data caching framework has been reworked to separate out the
data cache capabilities from the remote event notification
capabilities. As a result, 2.5.0 data cache configuration is not
compatible with earlier data cache configuration, and custom cache
extensions will likely need some level of revision. For details,
see the release notes in the Kodo JDO Developer's Guide.
For more details, see the Kodo JDO Developer's Guide and the full release
notes, available at:
http://solarmetric.com/docs/2.5.0RC3/docs/index.html
http://solarmetric.com/docs/2.5.0RC3/docs/relnotes.html
Enjoy,
-Patrick
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com

IE Automatic Component Activation Now Available

Similar Messages

Maybe you are looking for