IE Caching Issue while closing and opening a UI thrice or more

Hi Everybody..
Greetings of the day..
I am working on a web application (Can not disclose the name) where at certain level a word document generated contains a customized toolbar.
It contains one print option, when clicked opens a UI which shows default printer available (Its different from our normal printing).
When I repeat opening and then closing of this UI thrice or more times, the entire application gets hanged and I have
to terminate it by killing the associated process from task manager.
When this issue was analysed our by onsite team they arrived at a conclusion saying that its an IE caching issue.
But upto my knowledge I know that any application which is .SSL secured, by default IE never does cache control.
What could be the solution if application is not .SSL secured or if it is.
Kindly help asap.
Thanks.

Hi all
Did anyone ever manage to fix this? I'm having this issue across multiple iPads. Even if i completely reset the iPad (erasing all content and settings) it does it again when restored.
I've just got an iPad Air and that does it too. I even created a new Apple ID to see if that would work (trying to avoid any kind of caching aross iCloud, etc) and it does it straight away in those books. It's massivley frsustrating.
I have noticed it only seems to do it for iBooks formatted books, not ePubs.
Anyone have a resolution - it's quite embarrassing when you're doing a presentation about book features and the audience assumes youve only the wrong book each time. More annoying when clsoing the book and the wrong cover appears again, but also takes you to that books collection page, rather than the one you were in.

Similar Messages

Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not be apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
4. Reset the System Management Controller.
5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

Error while closing the open purchase order for MRP run

HI expets,
We are facing issue while closing the old purchase order(18.12.2007) for MRP run, if we are clicking delivery completed for the particular line item ,system is showing the error NET PRICE MUST BE GREATER THAN ZEROthough we have made GR and IR aganist the line item an value is also showing in the purchase order history tab, but in the condition tab there is no value showing for the particular line item .Kindly suggest the way forward.
regards
Karthick sundaram

one thing for sure, you cannot proceed without maintaining proper conditions in the PO.
Why they are not there or not anymore there is probably caused by customizing or vendor master data changes.

The background behind my pages has turned black, how do i get it to go back to grey? i have switched between preview, normal, bleed, slug and presentation and closed and opened in design and it is still black. I can't imagine layouts with the black backgr

the background behind my pages has turned black, how do i get it to go back to grey? i have switched between preview, normal, bleed, slug and presentation and closed and opened in design and it is still black. I can't imagine layouts with the black background please help!

or maybe the interface has been set to Dark?
Go to Preferences > Interface tab, choose Light from Color Theme dropdown on Apearance section (upper part of the window)

Cache issue while opening an attachment

Hi,
We are facing the cache problem while opening an attachment in the webdynpro application.
When we clear the cache of the browser, then we are able to open the attachment.
Can we prevent this from the application side.
All the attachments are stored in the backend (CRM) system.
Regards
MQ

Hi,
We are facing the cache problem while opening an attachment in the webdynpro application.
When we clear the cache of the browser, then we are able to open the attachment.
Can we prevent this from the application side.
All the attachments are stored in the backend (CRM) system.
Regards
MQ

GL balances differences between Year end closing and opening balances

Hi friends,
One GL account balances showing differences between year end closing & year opening balances.
Example: 2006 closing balance is 250000 $
2007 opening balance is 150000 $
difference is 100000 $ . why should coming like this. already completed balances carryforward (F.16) in 2006 & 2007 year.
any programe for this solution ?
One more point is just 2 days back i posted 2 entries for 2006 year equal to 100000 $ . after this entries shall we need go for F.16 (carry forwarded balances).
please do the needful. It is very urgant issue.
Raj

HI,
There shouldn't be any more postings to a GL Account once Balance carry forward has been executed.
If postings have been made then you should execute the Balance carry forward again, otherwise you will see difference in opening and closing GL balance (as mentioned by you).
Regards

Timed loop not starting - works after closing and opening project

Refer the image below - a simple timed loop should run when the Run button is pressed. What happens is that the parallel vi runs (see arrow) but the vi inside the loop doesn't. Both vi's shown run forever (i.e. the timed loop is only used to specify the CPU).
When I press the Abort Execution button, strangely it can then be seen that the execution highlighting runs into and through the timed loop and probe 50 is updated.
This sorted itself out after I closed the project and opened it again so its not a critical issue - was simply wondering what could cause this?

That program looks kinda weird.
First of all, avoid to use flat sequence structures whenever you can, or use it only when you are going to initialize something, or when your program has an specific sequence.
I think you have a problem the way you are conecting the subvis. Remember that in LabVIEW, the flow of the data will determine the order of execution, and in your case, the conections looks kinda weird.
I have a question; Do the subvis need to run simultainously?, or what do you need to do exactly

Caching issues with IE and HTMLPanel and DataSet

I have a div
<div id="liw" class="HTMLPanel"></div>
var liw = new Spry.Widget.HTMLPanel("liw");
liw.loadContent("/subscriber/subscriber.py/getSubscriberHeader");
A python method that lives at
"/subscriber.py/getSubscriberHeader" this returns dynamic data
based on logged in value.
def getSubscriberHeader(req)
if isLoggedIn(req):
return "<p>Welcome User</p>"
else:
return "<p>You are not Logged In<form> login
form here </form></p>"
In Firefox when the user logs in with the login form and the
pages reloads they get the welcome message. In IE even forcing a
new page load using "ctrl F5" or "Shift reload" doesn't get the
welcome message. Only closing IE and reopening it will get me the
welcome message.
Is there anything I can do about this?
Another issue I have is with an Add/Browse page.
I use a dataset to get me all the info on a bunch of cast
members
var ds2 = new
Spry.Data.XMLDataSet("/admin/manage_cast.py/getCastMembers",
"data/row",{sortOnLoad:"stage_name",sortOrderOnLoad:"ascending",distinctOnLoad:true,useCa che:false});
I have a form in the same page that will add cast members to
the same database that "/admin/manage_cast.py/getCastMembers" reads
from.... when they add a new cast member in FireFox I see the new
person added after page reload.... in IE I do not see the new
person and I have to shut it down and open it to see the new data.
Is there anything I can do about this? I am setting
distinctOnLoad to true and useCache to false.

For my dataset problem on the Add/Browse pages I forgot to
mention I have tried using:
updateContent
Spry.Data.updateRegion
Spry.Data.updateAllRegions
Once that dataset is loaded I am unable to get it to fetch a
newer version of the file, even with page reloads.

Closing and opening in new fiscal period

Hi
I am going to close last fiscal period and open new period . What should I do step by step for closing inventory and BP and Accounting and Open them in new Period. does system has any facility to do these step automatically.
Thanks in advance

PEC is a tool to use for you to close any periods. What it does is mainly creating certain retained earning entries. There is no way to do anything automatically for you. You may need to define new fiscal periods first before you do Period-End Close.
Thanks,
Gordon

Reg: Closing and Opening Web Dynpro Application in same browser

Dear Experts
In my webdynpro application when i click a button another web dynpro application is opened in another window(another browser) .
But i want to open the second web dynpro application inside the same browser in which closing the first applicaiton and opening the second web application in same browser window .
Please guide me to do this.
Regards
Arun

hi ,
Exit plugs have the special property that they use the defined URL parameter. After you have created the URL parameter in the parameter list on the Outbound Plugs tab page in the window editor, you can specify a value for this parameter in the method that calls the exit plug.
ref
link:[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/ca3351508f04e7e10000000a42189c/content.htm]
it would help u
regards,
amit

Error while creating and opening a ERP sales order in SAP CRM

Hi,
I am getting an error while creating or opening a ERP sales order from SAP CRM.
"Creation of the ERP Transaction failed" this is the error i'm getting while creating. when i try to open an existing sales order I'm getting a dump.
Attached the dump screen shot. From the dump analyasis it seems the transactions are not loaded through LORD framework.
The RFC connection seems to fine as i have tested accessing an ECC RFC FM through a sample program and its successful..
please help..
Thanks
Krishna

Hello Krishna,
Did you get a solution to this? I have the same dump message.
As a matter of fact, we already use ERP Sales Order and it works fine. But I have recently configured a new sales order document type, and the dump occurs only for this new Z order type.
Thanks a lot,
Luis.

Issue while insert and update data to DB tables

Hello all,
i am having an issue while insert the data to DB table.
my scenario is DB1 to DB2. i had a sender channel with select query which fetches data from DB1 and inserts to DB2.
so the select query will fetch the records that were INSERTED to DB1 and records that were UPDATED to DB1 and needs to insert/update to DB2 table.
Now the issue is i am able to insert the records but not able toupdate the records to DB2 table due to primary key issue.
im message mapping
sender message type is as follows:
<src_message1>
----<row>
-------<fieldA>
-------<filedB>
-------<filedC>
Receiver message type as follows:
<trgt_message1>
----<STATEMENT_1>
----<TABLE_NAME>
----<ACTION> INSERT
----<TABLE>
----<ACCESS>
----<field1> primary key
----<field2>
----<field3>
----<field4>
----<KEY>
----<field1>
----<field2>
----<field3>
----<field4>
my query in sender channel is : select filedA, filedB, filedC from test_table where createdate=sysdate or updatedate=sysdate
so it feteches the data from DB1 and inserting to DB2 but not updating the records to DB2 due to primarykey issue.
please suggest how to solve ....will it solve by using UPDATE_INSERT for action?
Best Regards,SARAN

Hi Nagarjuna,
i have done the following changes to target mapping structure;
1. action as UPDATE_INSERT
2. in access tab, i had mapped fieldDate to field4.
3. in Key tab, i assigned the sysdate to field4.
but issue still exist. could you please check my above changes are correct or not. if wrong please provide me the details that needs to be done.
thanks in advance.
i'm providing the error details again:
my query in sender channel is : select filedA, filedB, filedC, FiledDate from TEST_TABLE where fieldDate=sysdate or updatedate=sysdate
it returns 4 records as follows:
fieldA--fieldB-fieldC---fieldDate
1001----EU---- 1----
    2011-11-10
1002----CN---- 0----
     2011-11-10
1003----AP---- 1----
      2008-03-15 (already exist in DB2)
1004----JP---- 1----
    2007-04-12 (already exist in DB2)
the first two records are created today and remaining 2 records are updated the fieldC from 0 to 1 ( in DB1 )
while inserting these 4 records to DB2, we get the following error "java.sql.SQLException: ORA-00001: unique constraint (data.TEST_TABLE_PK) violated" .
Best Regards,SARAN

BEx web report selection screen entries retain when closing and opening the report again

Hello all,
please help me in the below query.
Till last month the entries we made in BEx web report selection screen are retained in the selection screen even when we close the web report and open it again from portal without logging off. But recently this functionality is missing and the entries in selection screen are not remembered when we close and open the same report again. It is a good feature for the users. Have you come across this issue?

No...I think i can reframe the question very clearly......For ex: we are opening a Bex Web report...so initally we would be prompted by the variable selection screen...in which we have to give the entries(Values) for those variables like Cal month, Sales org, Company code, etc.....Later on the report will get open based on the values we have given......
Now if we close the particular report without logging off then if i try to open the same report that selected values are missing.....earlier it used to remember the values we have given until we log off....But now that functionality is missing....It was very useful feature.....Can you please tel me what can be done to resolve this??
I hope the explanation would be clear now.

Three beeps after closing and opening lid.

Hi everybody.
I have a MBP 13", late 2011. I installed 8 GB and 2 months later, I started to listen to 3 beeps and those happens when I close the lid and leave some hours closed and then I open it. I read in some foruns that it might be a software problem and not a dying HD.
I performed a memory test with memtest software and both banks look fine.
I also read that I should disable the option that turns off the HD.
When I open the lid I have to push Turn On buttom and it beeps. Then I push 5 sec to shut down the computer and when I turn it on, I see one bar being filled, meaning the computer hibernated.
After all of it, it still beeps. I think, but I'm not sure, that it only happens when I lock the computer and close the lid. I didn't try to leave with open session for hours.
I also run sudo pmset -a hibernatemode 0 then 3, then 7 and last 25 and the beeps come over again. Now it is hibernatemode 3.
Is there any fix for that? Ah, I started in safety mode, with no good results.
Thanks
Sérgio

I'd like to add that this situation happens when I lock my account and close the lid. If I don't lock it, this problem does not happen.
Here is my configuration:
pmset -g custom
Battery Power:
lidwake              1
standbydelay         3600
standby              1
ttyskeepawake        1
hibernatemode        3
hibernatefile        /var/vm/sleepimage
displaysleep         2
sleep                10
acwake               0
halfdim              1
sms                  1
lessbright           1
disksleep            10
AC Power:
lidwake              1
standbydelay         3600
standby              0
ttyskeepawake        1
hibernatemode        3
hibernatefile        /var/vm/sleepimage
womp                 1
displaysleep         10
networkoversleep     1
sleep                10
acwake               0
halfdim              1
sms                  1
disksleep            10
Thanks!

Closing and opening new financial year activities

Hi everybody
I want to know step by step process to close financial year and open new financial year with transaction codes in MM prospective only. i know only number ranges to be changed. i want to know what all the things to be done in step wise with T-code.

Hai Rakesh,
Month End Closing Activities in Finance
1. Recurring Documents.
a) Create Recurring documents
b) Create Batch Input for Posting Recurring Documents
c) Run the Batch Input Session
2. Posting Accruals or Provisions entries at month end
3. Managing the GR/IR Account-Run the GR/Ir Automatic Clearing
4. Foreign Currency Open Item Revaluation-Revalue Open Items in
AR.AP
5. Maintain Exchange Rates
6. Run Balance Sheets u2013Run Financial Statement Version
7. Reclassify Payables and Receivables if necessary
8. Run the Depreciation Calculation
9. Fiscal Year Change of Asset Accounting if it is year end
10. Run the Bank Reconciliation
11. Open Next Accounting Period
Period End Closing Activities in
Controlling:
What are the period end closing activities in controlling ?
The following are the period end closing activities in Controlling:
Repost CO Documents that was incorrectly posted
Run Distribution or Assessment Cycles
Run the Overhead Calculation in Product Costing
Run the WIP Calculation in Product Costing
Run the Variance Calculation in Product Costing
Run the Settlement Calculation in Product Costing which will post all the
WIP and variance to Finance and PA.
Calculate FI Data for Transfer to Profit Center
Transfer Balance Sheet Items like Recievables, Payables, Assets and
Stock
Run Results Analysis for Sales Order if applicable
Run Settlement of Sales Orders to PA.
Regards
Madhu I

IE Caching Issue while closing and opening a UI thrice or more

Similar Messages

Maybe you are looking for