Ie cursor flickering problem

I am Facing a problem in Internet Explorer. The problem is that the input box cursor flickering is horrible in ie only(the input is done in html and its embedded next to the flash). That is because of a swf file embedded next to it. I got it fixed when i remove the WMODE="Transparent" from the flash embedding code. But in my case the WMODE="Transparent" is important to fix a button above the flash which loads a Modalbox.I guess the problem is due to the animation which is looping in a flash.when the animation stops,the cursor starts blinking normally.if any one have gone through this issue.. please help me out.
thanks
sankar

Start
Internet Explorer (No add-ons) in add ons mode and check. :
-- > Start | (All) Programs | Accessories | System Tools | Internet Explorer (No add-ons).
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Similar Messages

When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back. The problem occurs in both MS Word and Pages. Any idea of how to resolve this annoying problem is appreciated. System: 10.10.1

When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back. The problem occurs in both MS Word 2011 and Pages. Any idea of how to solve this annoying problem will be much appreciated. System 10.10.1 on a MacPro (Late 2013)

The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
https://www.youtube.com/watch?v=ZNQ0D84DdF4
What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

Brush cursor flickering to arrow cursor

When painting with the paintbrush the cursor flickers between the round brush size cursor to an arrowhead. The paintbrush continues painting as it should, but the cursor flickers constantly between the 2. This is a visual annoyance but doesn't seem to affect performance. Has anyone else had this happen and is there a possible fix?
I'm on Photoshop CS6 (latest updates) on 2008 Mac Pro 3,1 with OS X 10.6.8.

Some additional details.
I usually have 2 or 3 files open while I work that are not set in tabs. They are bascially open side by side. I turn off tabs so I can see all 3 files at once.
The brush tool flickers UNLESS I click the file's window title bar. When I paint I hold alt/option for the eyedropper to grab a color from my other open file then continue painting on my active working file. I found this is when the cursor flickers until I click the title bar even though it is already the active file/window. So pshop CS6 is confused that I have open files not in tabs.
The tool's cursor only flickers when in motion.
The flicker also goes away if I seat the files in tabs.
CS4 never had this problem (I skipped cs5/5.5 so do not know if it happened in that release).
*update* I'm testing working with 3 tabs open side x side rather than 3 floating windows - will reply with outcome after some time working.

Cursor flickering rapidly on Equium A100-306

Having bought my new A100-306 laptop in December, I`m now having problems with the cursor flickering rapidly (and disappearing altogether when the mouse is not being moved) on certain 3D applications/games like The Sims 2 and Home Designer 3D.
I`ve downloaded the latest video driver for the intel 945GM graphics card, but there`s still no improvement. The problem is I can`t see where the mouse is unless I keep moving it and even then the rapid blinking is very annoying.
Would anyone know how to cure this problem please and if it`s a common problem with this model? As far as I can recall, we did have a week without trouble when we first loaded The Sims 2 originally.
Any help would be much appreciated!
Regards
Giles

Thanks for the quick response. I don`t get the same problem with Windows, word, and excel. I too had a thought that the grahics card could be struggling, but I`m sure we didn`t have a problme with the Sims 2 when we first loaded it. Unfortunatley I don`t recall loading anything either on the day that the problem first appeared. Will try altering the settign as you suggest.
On a connected point, though, I clicked on Media Centre yesterday (hadn`t used this until now) and had real problems with the cursor again during the intial set up - sometimes it was there, sometimes it had vanished and the only way I could get it back was to wait for the icons at the top of the set up screen to disappear (which they tended to do after about 10 seconds of being displayed) and then hit the touchpad. Sometimes I had to try this 2 or 3 times to get a cursor to appear and even then it was a struggle to complete the set up process.

Facing "Display Flickering" problem with my 15" macbook pro(A1286)while swapping the desktops and closing the tabs.....need help...reply soon

Suggest Solution for this Display Flickering problem ....

Hi, I read the post about calibration and I probably do that a little too often TBH! As I get so little time out the battery and mainly use my MBP on my lap, usually with the power supply near by, it gets charged to full, run to empty to the point of sleep, or sometimes it even cuts out and then is recharged to full again, so I really think it's new battery time. I've seen non Apple Official ones for between £35 and £65 that have 3 year warranties and state they are around 5200mh but am unsure due to reviews.
Later...
Anyway's I have now ordered a non Apple replacement from Amazon for about £35 and it has several good reviews and 4.5 out of 5 stars so I'll see if it works and report back. If it doesn't I'll send it back and get the Official Apple one.
Message was edited by: Missy Steph

MDIChildren flickering problem while switching between child form with dockstyle.fill and borderstyle.none

I have an mdi applicaton in Visual studio 2010 (.Net framework 4.0). I'm having a flickering problem when user switch between an MDI Child form. I'm declaring the child form then setting the borderstyle.none at design time and dock property to fill
through programming and make them a MDIChildren before I show them so that it takes up the entire space of the MDI Parent window without being maximized (client request).
i don't want to display control box(minimize, maximize,close) of child form in mdi parent form. (client request)
The problem is that when the child form is being displayed it is briefly shown in it's default size with icon and control box before being resized to fill the available area on the MDI Parent form. When a Child Form loads, you can see it in it's original
size (the size from Design-time) then all this flickering while maximizing .
In other words, child form show up in the client area of the MDIForm, not maximized, with a caption, very shortly, before they are finally filling the client area. there is a short flicker when a new form is created and displayed. This process is most noticeable
with a not-so-powerful PC or there are lots of control inside child form.
below is my code to show child form
MyChild1 c1 = new MyChild1();
c1.MdiParent = MdiMainParent;
c1.Dock = DockStyle.Fill;
c1.Show();
how can i solved the problem of flickering issue?
I tried many options which i have described below
1.double buffering.
2.set style property to child form
this.SetStyle(ControlStyles.UserPaint, true);
this.SetStyle(ControlStyles.AllPaintingInWmPaint, true);
this.SetStyle(ControlStyles.DoubleBuffer, true);
3. override below method in each child form
protected override CreateParams CreateParams
get
CreateParams cp = base.CreateParams;
cp.ExStyle |= 0x02000000;
return cp;
4. override below method in each child form
const int WM_NCPAINT = 0x85;
const int WM_SIZE = 0x05;
protected override void WndProc(ref Message m)
if (m.Msg == WM_NCPAINT)
if (this.WindowState == FormWindowState.Maximized)
return;
if (m.Msg == WM_SIZE)
if (this.WindowState == FormWindowState.Maximized)
return;
base.WndProc(ref m);
but I didn't see any effects. please someone help me to resolve flickering issue. thanks in advance.

Hi hardikvaishnav,
This is a known issue which has been reported to Microsoft Connect. Unfortunately, this issue will not fix due to stability issues around MDI. For more details, see
https://connect.microsoft.com/VisualStudio/feedback/details/97787/border-of-mdi-child-form-flashes-up-despite-formborderstyle-none.
You might use a user control or panel instead.
Best Regards,
Bob Wu [MSFT]
MSDN Community Support | Feedback to us

ALV flickering problem

Hi,
I have flickering problem with ALV control (cl_gui_alv_grid). My alv grid control is not in edit mode.
I am using ALV grid for event planning with drag drop operations, so there may be 1000+ rows sometimes at grid.
Also I call refresh_table_display with soft_refresh and is_stable='XX.'
(I call cfw=>set_new_ok_code to trigger PBO. refresh_table_display is being called at PBO )
It flickers just a second or two after drop_complete but it is critical for usability.
I think flickering happens because of scrolling, so I used set_scroll_via_id but nothing changed.
Thanks.

Hi Manu,
I tried not to trigger PBO (Called refresh_table_display at PAI, commented set_new_ok_code)
It does not help..
(Same behaviour : se38-> BC_ALV_TEST_GRID_PERFORMANCE.Increase record count to 5000.Run.
Scroll to the bottom of list.)
Thank you..

Flickering problem with Apple TV

I am suddenly having flickering problems after updating Apple TV. The box has worked fine for several months though I did have this same problem when I first got it in February. I have a Panasonic 37' viera. I have unplugged both the TV and the Apple TV box, reset it a number of times. Don't know what to do.

I'm having the same issue, albeit right out of the box. I hooked up my Apple TV according to the instructions, have no other issues with my wifi, and the HDMI and power cables are all securely connected. My TV's also a Samsung, experiecing the same "flickering" of audio. In addition, during set-up, the screen was also flickering to white while inputting my wifi info.
Am hoping swapping it out in store will fix the problem. I was so excited to get my AppleTV in the mail and everything else Apple-to-TV has been working great. (I had my ancient black MacBook -turning 6 in June- hooked up with zero connectivity problems.) Wondering if this will be an ongiong issue? Had decided against AppleCare for such an inexpensive addition to my home, but maybe I should re-think that decision...

Flickering problem with live viewing with IMAQ Image Display

Hi everyone,
I am trying to write a program to do live imaging with Andor camera. I am using some examples from Andor. The images are acquired in sequence and send into IMAQ Image Display and also Intensity Graph. There is minimal flickering issue in the Intensity Graph but there is very bad flickering problem in IMAQ Image Display. Perhaps I misunderstand how to optimize the vision tools. Does anyone know how to overcome this issue? I have attached the code that I am testing. Thanks in advance.
Best regards,
Han Yen
Solved!
Go to Solution.
Attachments:
iXonRTA_live_0.0.1.vi ‏70 KB

You can use Vision Assistant to test our vision functions. Vision Assistant is really meant to prototype - it does not have all teh functionality of Vision Development Module and is not as flexible as we don't allow you access to all the settings for every function.
I recommend starting in Vision Assistant and then porting over to LabVIEW or C (whatever you are most comfortable with)...this is built-in functionality. There is nothing wrong with using Vision Assistant to do live imaging, just that you run into limitations and you will only be able to use this code on computers that have Vision Assistant.
Hope this helps.
--Michelle
Instrument Control R&D
National Instruments
Instrument Control
Machine Vision

Flickering problem on screen - 3000 series N200 laptop

Hello!
I have a 3000 series N200 laptop (0769 type) for 3 years. Approximately 3 months ago, there was a screen problem that the screen had white vertical gridlines. Service replaced the chipset of the graphical card.
Yesterday, a flickering problem has been appeared. I updated bios and display drivers from below link.
http://support.lenovo.com/en_US/downloads/default.page?
Could not get a solve with those updates. Then, I dismounted the front cover of screen. Re-assembled the LVDS FFC cable of the LCD display a couple of times, problem continued. Then, re-assembled the inverter cables. It also did not provide a solution.
>See the problem photo (1.jpg) at below link.
https://docs.google.com/open?id=0BweTh37k3ZRSQWYxRFNIWWpGSFE
Please advise about this matter.
Thanks.

Hello suguz and welcome to community,
As you have already updated the video driver and BIOS then you can check with adjusting the monitor refresh rate to 60Hrz.
Kindly check the same issue in BIOS mode and if issue continues then it might fault with Lcd display.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Getting ORA-01000 : maximum open cursors exceeded problem

I am getting ORA-01000 : maximum open cursors exceeded problem in my piece of java code when the
load is high .Open cursors is set to 1000 still getting the same problem .
Basically i have to select some rows from a table which i am doing in A() function and process it and insert into
another table which i do it in another function B() there is a update statement also in this fun.
There is a particular business logic for which i need to call B() from the A() function
which happens to be in the select result set like below
A()
query ="Select * from temp";
while(rs.next)
B();
All the result sets are properly being closed that too in finally block.
I dont see any other problem with code .Still I am gettin this cursor problem.
Is some thing wrong with the design like calling a
insert from a result set while loop or the update statement

The code below is deleting fine. Check your $id is valid. I wonder if ADOdb has some quirks with binding and variable creation/destruction, similar to #1 in http://www.oracle.com/technology/tech/php/htdocs/php_troubleshooting_faq.html#bindvars
<?php
See ADOdb Tutorial for Oracle: http://phplens.com/lens/adodb/docs-oracle.htm
drop table mytab;
create table mytab (city varchar2(20), country_id varchar2(20));
insert into mytab values ('SF', 'US');
insert into mytab values ('Sydney', 'AU');
insert into mytab values ('London', 'UK');
commit;
require_once("/home/cjones/public_html/php/adodb5/adodb.inc.php");
$db = ADONewConnection("oci8");
$db->Connect("//localhost/XE", "hr", "hrpwd");
echo "Before:\n";
$rs = $db->Execute("select city from mytab");
while ($arr = $rs->FetchRow()) {
    echo $arr['CITY'] . "\n";
$s = $db->Prepare("delete from mytab where country_id = :ci");
$db->Parameter($s, $ci, 'ci');
foreach (array('US', 'AU') as $ci) {
     $db->Execute($s);
echo "After:\n";
$rs = $db->Execute("select city from mytab");
while ($arr = $rs->FetchRow()) {
    echo $arr['CITY'] . "\n";
?>There's another sample in the ADOdb OCI8 driver:
          Usage:
               $stmt = $DB->Prepare("insert into table (col0, col1, col2) values (:0, :1, :2)");
               $DB->Bind($stmt, $p1);
               $DB->Bind($stmt, $p2);
               $DB->Bind($stmt, $p3);
               for ($i = 0; $i < $max; $i++) {
                    $p1 = ?; $p2 = ?; $p3 = ?;
                    $DB->Execute($stmt);
               }For queries I know this works. I haven't seen any examples that prepare once.
$rs = $db->Execute("select city from mytab where country_id = :ci", array('ci' => 'UK'));
while ($arr = $rs->FetchRow()) {
    echo $arr['CITY'] . "<br>\n";
}

Cursor flickers so badly that it is very difficult to select ANYTHING

On every web page, the cursor flickers on and off so badly that it is difficult and sometimes impossible to select anything - button, checkbox, whatever.
And, with reference to the pasted information below, I did not change or update any preferences. I simply had 2 add-ons disabled at installation of the new version of the browser.

Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

I have purchased Mountain Lion to correct the gray cursor square problem, and I cannot get Mountain lion to download

I purchased Mountain Lion from 10.7.5 on my Imac to correct the gray cursor square problem, now Mountain Lion will not fully download. Any recommendations?

Upgrading to a newer OS X does not often correct pre existing problems. MIght be a disk space issue, or the startup disk needs repairing.
Make sure there's enough free space on the startup disk.
Control click the MacintoshHD icon on your Desktop then click Get Info.
In the Get Info pane you will see: Capacity & Available
Make sure there's at least 15% available disk space.
For the gray cursor issuee, startup your Mac in Safe Mode
A Safe Mode boot takes longer then a normal boot so be patient. Once you are in Safe Mode, click Restart from the Apple menu.
If that didn't help the cursor issue, launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk
If Disk Utility reports errors, since v10.7 Lion is the currently installed OS, restart your Mac while holding down the Command + R keys so you can access OS X: About OS X Recovery.
From there you can access the built in utilities to repair the startup disk.
message edited by: cs

Another weird Icebook cursor-freeze problem

I recently asked about a full cursor-lockup problem here:
http://discussions.apple.com/thread.jspa?threadID=440688
Problems started after updating this machine to OS 10.3.9.
Anyway, I've been able to improve matters to when the cursor freezes, I can
unlock it by unplugging the phone line to the (internal) modem. Only locks up when I'm online (dialup). Weird, huh? And down to nuisance level, though I'd still like to cure it.
Details: 2002 Icebook G3/600 running OS 10.3.9
Ran fsck, repaired permissions, cleaned & reseated RAM (tests
OK with Memtest)
Any other ideas?
TIA & Cheers -- Pete Tillman
"There is no known substitute for scrith."
--Dr. John Stockton, rass
Icebook Mac OS X (10.3.9) 384 MB RAM

I've had that problem since I purchased my MacBook about 2 years ago. I've even flatten and installed new OSs over this time, no change. The behavior I have is the cursor sticking after just about any input which requires the computer to do some processing (ie: copying and pasting text, performing edits a photo, renaming a folder, etc...). It's very distracting when you're working hard on a document or drawing and constantly waiting for the cursor to unstick. Believe it or not, I've actually gotten used to it. Good news is, I'm buying a MacBook Pro soon, and giving this computer to my wife. I'll freak if the new Pros do it too. No......!
--Robb

Cursor flickering (with video)

Got some really bad cursor flickering in InDesign CS 5.5 (also kind of happening in Photoshop)
I looked around and some people have suggested it's the mouse, but if it was the mouse it would be causing issues in other programs. Anyway, I recorded a video of it happening. Happens when I select different tools as well as when I mouse over some of the fields at the top of the window.
http://www.youtube.com/watch?v=-7lL91MdGkw&feature=youtube_gdata_player
Any thoughts?

Props to whoever can figure out what I'm designing based on that layout =)

Ie cursor flickering problem

Similar Messages

Maybe you are looking for