IE displays differently than on browserlab
A specific page oon a site I am building is not rendering correctly in EI, EI is not seeing the Javascripts mycarousel or lightbox. In browserlab the carousel is correct. Just wondering if there is some adjustment i need to make on my EI program for it to use the those scripts.
Site is www.deependesign.com
Thanks in advance.
Hi pereo,
I'm not sure what the issue is. You might check out this blog post which has some details about how we have configured our versions of IE: http://blogs.adobe.com/browserlab/2011/06/22/ie-9-and-compatibility-view/
Similar Messages
-
I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I adjust it to look normal?
Hi Paul ,
It could be a compatibility issue as well as Acrobat 8 is an older version.
Do you get any error message while registering for the product?
Try repairing it and once and also check for updates as well.
Is it happening with all the word files or any specific one'?
Regards
Sukrit Dhingra
Acrobat 8 and Windows 7 Don't Work -
Interactive report column filters to display differently than column values
Greetings...
We use images a lot in our interactive reports to provide a visual representation to a status, or something locked for update, or what-have-you. By default, when a user clicks the column heading of a column which contains images, the drop-down list that shows up displays the actual images, which is nice for the user to identify exactly which thing they want to filter on. The problem is when the user selects on of the options in the filtering drop-down, the resulting condition that is displayed under the interactive report search bar is the HTML code of the image. I'd like something else to display there because showing the user the HTML code is atrocious.
I didn't think what I want is possible, but then I came across the Page Locks page within ApEx (page 4000:291 in ApEx 4.0.1) which displays a list of all the pages of an application and whether they are locked or not. It also allows you to bulk lock or bulk unlock a bunch of pages. That page uses an interactive report with a column called "Status" which contains images that represent whether the page is locked or not. When you click the "Status" column heading to filter, instead of seeing the images of an open and closed lock, you see the words "Page Locked" and "Page Unlocked." And even better... when you select on of them, the condition that is displayed to the user is very user-friendly.
Can someone tell me how this is done so I can replicate it in my own apps?
Shane.Why not create the IR using the text you require e.g. 'Lock', 'Unlock' and then use JQuery to replace the text in the report with the image you want. All the filters should then show the plain text and the report will display the image. e.g.
http://apex.oracle.com/pls/apex/f?p=46801:1
Here's what I did:
Firstly make sure the IR has a region template.
Then create a Dynamic Action with the following attributes:
1. Advanced
2. Event: After Refresh
3. Selection Type: Region
4. Region: [select the IR Region]
5. Action: Execute JS Code
6. Fire on page load: [checked]
7. Code:
$('td [headers="TEST"]').each(function(index) {
if ($(this).text() == 'Lock') {
$(this).empty().html('<img src="/i/htmldb/icons/locked_small.gif" alt="Lock" />');
else {
$(this).empty().html('<img src="/i/htmldb/icons/unlocked_small.gif" alt="Unlock" />');
});Where TEST is the column name.
That's it, this may also be of interest:
http://simonhunt.blogspot.com/2011/10/adjusting-interactive-report-column.html
I hope it helps
Shunt -
Why is firefox displaying differently than IE?
I'm trying to display the slideshow on my homepage without any border. The correct view is found with firefox. The main content in my css currently has a 1pt solid border because two things happen when i remove it.
1. Firefox will display the slideshow off to the side.
2. Firefox shows a space between the main content and the logo section
I'd like to remove the border so that IE can display it correctly but i haven't found a way to do this without affecting the look in firefox. I'm thinking it has something to do with margins and so forth but i can't pin it down. Any help is much appreciated!
site is found at http://moss1.moranshipping.com and I've attached my cssIn case anyone was wondering the below seems to have solved my problem:
mainContent{
border-top:inset solid #FFF;
border-top:inset;
With this I still have the border in firefox that I need so there are no spaces in between sections and IE will not display a thick border around my slideshow. -
Filter on a field displayed differently than stored
Hello,
I want to filter a table on a field which is an IP address but represented as a single number in the database and not xxx.yyy.zzz.ttt.
but for user friendlyness, it's better to input the field as an IP on the jsp page.
but i don't know how to do that ? where can i do this transformation nicely ?
anyone could help me with this ?
many thanks
regardsi'm using ADF and how can i create a converter ?
otherwise, there is no method i can override in the view object or entity object ?
if it existed i could get the where clause parameter and replace it with the converted one just before the select is executed -
PDFs display differently in Internet Explorer 9 versus FireFox
We use Adobe Reader X in all cases (10.4.1)
On old computer, we have a website we go to using Internet Explorer (version 8.x on XP) where we ope/save & print to a PDF file. The information on the PDF prints vaules in a certain order - for example: A,B, C --works great--this is what we want it to do.
We buy a new computer, Windows 7 with IE9, and the PDF displays with the same values in this order: C,B, A - not good, do not want that.
We try FireFox on the new computer -- works great --just like it did on the old computer.
What setting in IE9 is causing this PDF to display differently than in FireFox (or IE8)?
UPDATE: We did load IE8 on Windows 7 (by uninstalling IE9) and the PDF works fine --so it's not just something unique to FireFox. IE9 is displaying information in this PDF differently--why?Add/update these params in your web.xml and redeploy so the style class names are not optimized and client debugging is easier.
<context-param>
<param-name>org.apache.myfaces.trinidad.DEBUG_JAVASCRIPT</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>org.apache.myfaces.trinidad.DISABLE_CONTENT_COMPRESSION</param-name>
<param-value>true</param-value>
</context-param> -
How do you make the title bar display different text than the page title?
I'm looking for a way for the title bar display of my web page to be different than the text in the actual nav bar created by iWeb. For instance, I'd like the nav bar to just say Home for my main page, but in the title bar in the browser say "blah blah blah."
I know there has to be a way to do this. iWeb has actually done it on one page already, but I can't figure out how. I think it picked up the title bar text from the first text box in the page. For instance, the page name in the navigation bar is "blahs for today" but the browser title bar when you open that page says "blah blah," which happens to be the first line of text on the page. The page title in iWeb.app, though, is "blahs for today." But if I look at the source code it lists title as "blah blah."
I'm guessing I might be able to work around by making an invisible text box with the text that I want in the title bar as the very first thing on the page, and hope iWeb makes that the title bar text. I'd rather have a more correct way of doing it.
Is there a way of doing this in the source code without having to change a lot of stuff?
Thanks for any help.Richard Kirkman1 wrote:
I think it picked up the title bar text from the first text box in the page. (...) I'm guessing I might be able to work around by making an invisible text box with the text that I want in the title bar...
Richard ~ The key is the default Title box that iWeb creates for every new page — it's that which you need to edit, not another text box you've created. And to make the text in that Title box invisible, see here. -
Image layouts display differently in Safari than in Explorer
I have noticed that web page images display differently in Safari than in Explorer on a PC. On a PC, the web page may display three images side by side. In Safari, I might get two images side by side and the theid image below. Is there any correction for this? Thanks.
Norb#sidebar_1 a:vistied {
color:#000;
is stating that all visited links in the #sidebar_1 div to be black. Are you saying that all visited links are black, outside the sidebar_1 div?
Jim -
Lightroom displays colors differently than Photoshop
Lightroom (and my image previewer - IfranView) display my image colors differently than photoshop. This is very disturbing (why can't Adobe make this simple!)!
Image in question - see below. Center image is Photoshop, left is Lr 4 and right is InfranView.
Colorspace: AdobeRGB 1998
Image color (exported the TIFF file in Lr, what is shown below): AdobeRGB 1998
NOTE: when I export out as sRGB, IfranView displays it correctly (I don't know why, it can't display ProPhoto correctly, but never had a problem with AdobeRGB). Lightroom looks incorrect when viewing the TIFF, AdobeRGB JPEG and sRGB JPEG.
What is going on?? I've tried this on two computers now and it is the same problem!The larger file is Adobe RGB and the smaller file is sRGB. I see no difference in overall tone or color between the two files in LR 3, LR 4, LR 5, PS CS5, PS CS6, PS CC 2014, or Windows Photo Viewer which is color-managed, aside from an almost imperceptible change in the darkest blacks which I'd expect since you're converting AdobeRGB to sRGB at some point.
I can make the Adobe RGB one look like it does at the left of your first screenshot if I Assign Profile: sRGB to it in PS.
Since your monitor appears to be wide-gamut and therefore similar to Adobe RGB, I think the problem you're having is that LR thinks the monitor is sRGB for some reason, perhaps due to your switching the cables from one computer to the other without rebooting and recalibrating. It's also possible that your profile is stored in the monitor rather than in the computer and one computer understands this and the other doesn't so you're getting double-profiling or no profiling occurring.
It sounds the your only issue is having two computers attached alternatively to one monitor without having a valid profile on each computer for that monitor and aren't restarting each computer to load that profile. At least that is my analysis given the limited information.
I would conclude that nothing is wrong with LR or PS just the hardware connections and the color management confusion between the two computers, not your confusion, the computers'. -
Flash.system.System.totalMemory different than Windows mem display
Anyone know why flash.system.System.totalMemory is much
different than what I see FlashPlayer taking up in the Windows Task
Manager?
I would expect to see some overhead, but the differences I'm
seeing are quite large (i.e. 80MB vs 150MB).
ThanksI may have run into something that might be related. The project I am working on was going fine until I added updates and switch from VGA to HDMI. I added the updates via ICE rather than download after install. The OS install went through the normal
routine and rebooted. I removed the installation disk and the system rebooted and started to continue the install process. Then the screen went blank as if the system was going to reboot... nothing. I checked the HDMI output and still nothing. I removed
all the updates and tried again, same exact result. If I power cycle the message says that the install failed.
I went into the BIOS and found the video settings had support for CRT, HDMI and LVDS. I have ran into LVDS issues before. I disable LVDS, and set the system to output from CRT. This time the OS installer worked as expected. My guess is that the video driver
switched to the LVDS screen. You might be getting a video driver update - check the BIOS settings and disable LVDS if enabled.
Sean Liming - Book Author: Starter Guide SIM (WEI), Pro Guide to WE8S & WES 7, Pro Guide to POS for .NET - www.annabooks.com / www.seanliming.com
There's no driver updates, also I don't have the option for LVDS in the bios. The computer has a display port and HDMI, I'm using the HDMI.
I re-imaged the computer and tried updating 1 update at a time to try an isolate the problem. About 5 updates in I realized it would take several hours to complete the job, so I started to group the updates. The problem re-occurred with the following
group of updates.
KB2991963
KB2992611
KB2993958
KB3003743
KB3004361
Unfortunately I don't see a correlation. I re-imaged and re-installed the updates on 3 other identical machines and could not reproduce the problem. Very frustrating... -
Somehow my apple id email address under homesharing on my apple tv is different than that used for homesharing on itunes in my imac. I can't access home sharing on my apple tv because of this. Can you please tell me how to change it on the apple tv in order to get homesharing to work?
turn off home sharing on apple tv, then turn it on again, entering new credentials. Apple-TV works very reliably with home sharing unlike iDevices which don't
-
I am using Illustrator CS4 and my drop down menu displaying different typefaces is no longer showing all of them, just blank spaces where they would be...that is unless I put my cursor over it and I can then see the typeface. This is more of a nuisance than anything and didn't happen until I updates OS X to Yosemite. I currently am operating OS X Yosemetie 10.10.2
I have attached a screen shot. You can see that the font highlighted as the cursor is over it I can see the preview...but one I move the cursor it appears like all the others in the list and is blank.
HELP!Solved using this previous users had the same issue; Font previews not appearing correctly in the character window after upgrading to Yosemite
-
I just upgraded to lion on my intel macbook. I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen. How do I do this?
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
Displaying different levels of the same hierarchy in the different columns
I have a parent child hierarchy and wish to display different levels of the hierarchy in different columns of the resultset eg
level 1 level 2
Europe UK
Europe France
N America US
N America Canada
However writing MDX like the below
select
{} on 0,
([Geo].[level 1],[Geo].Level 2] on 1
from cube
results in the error "The [Geo] hierarchy is used more than once in the crossjoin
How can I get around this??Hi,
You can make use of CrossJoin function in MDX, I give a sample MDX based on the AdventureWorks database:
select {[Measures].[Reseller Sales Amount]} on 0,
crossjoin({[Sales Territory].[Sales Territory Group].[Sales Territory Group].members},{[Sales Territory].[Sales Territory Country].[Sales Territory Country].members}) on 1
from [Adventure Works]
After execut the MDX you will get the result like this:
Reseller Sales Amount
Europe
France
$4,607,537.94
Europe
Germany
$1,983,988.04
Europe
United Kingdom
$4,279,008.83
NA
NA
(null)
North America
Canada
$14,377,925.60
North America
United States
$53,607,801.21
Pacific
Australia
$1,594,335.38
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
How to display more than 132 characters in a smartform
Hi Experts,
I am reading notes/text entries by calling read_text and then passing them in a variable. I want to display the notes. But even after declaring the variable as LINE2048, it is displaying only 255characters as output length in smartform.
My code:
TYPES: BEGIN OF TYP_FINAL,
PARTNER_NO TYPE BU_PARTNER, "Partner No.
OBJECT_ID TYPE CRMT_OBJECT_ID_DB, "Object ID
PROCESS_TYPE TYPE CRMT_PROCESS_TYPE, "Activity Type
ACTUAL_NOTE TYPE LINE2048, "Actual Notes
END OF TYP_FINAL.
data : T_FINAL TYPE STANDARD TABLE OF TYP_FINAL,
WA_FINAL TYPE TYP_FINAL.
data: v_actualnote TYPE LINE2048.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = C_0002
LANGUAGE = sy-langu
NAME = l_name1
OBJECT = C_BUT000
TABLES
LINES = t_line
EXCEPTIONS
ID = 1
LANGUAGE = 2
IF SY-SUBRC = 0.
clear: v_accountnote.
LOOP AT T_LINE INTO WA_LINE.
CONCATENATE v_accountnote wa_line INTO v_accountnote SEPARATED BY space.
clear: wa_line.
ENDLOOP.
wa_final-account_note = v_accountnote.
clear: v_accountnote.
ENDIF.
On the smartformm side, under main window->loop->text(to display the variables).
How to display more than 255 characters in a smartform.
Regards,
Sangeeta.why the heck would you use read_text when you want to print a text/note on a form?
in SAP-Script we use the "INCLUDE"-Statement for this.
and in smartforms a Text-node of type 'I'.
you can not write all in one line and expect the system to handle this like a floating text.
one character takes a cretain amount of space (varying for different characters and font and font sizes).
you Page has a certain width, so where is the miracle in the thesis that on a sheet of paper with a certain width just a certain amount of characters will fit?
Maybe you are looking for
-
How do i get a created pdf file to my desktop
how do i get a created pdf file to my desktop
-
SUNWjass rm-client fails for Solaris 10
(I re-worded the question and posted it to [Sys Admin Best Practices|http://forums.sun.com/thread.jspa?threadID=5330719] ) I'm sure I read about this problem in the last week or two, but now that I have it I can't find the solution. I'm changing a se
-
Every time I try to access any text link on any site, a games site popup appears over the lin so that I cannot access the link, only the popup. I do not recall signing up for this site.
-
Installing on a macbook air.
Ok so I bought Adobe CS6 about a year ago, and back then I owned a PC, since then i upgraded my laptop to a macbook air. question is... can i download CS6 to my macbook air if i still have then S.N.# from the first time i bought it, even though when
-
Web services certificate not found every time login using PIN
I have problem when signin using CX600. Every time i sign out and sign in again, i got error " certificate web services cannot be found". So i must connect the USB cable from CX600 to PC anbd login from PC, then i can login succesful. Anyone can shar