IE New version problem

Hi all.
I have installed the last windows sp and it updates the IE from version 6 to 7 (or something like that) and when i try to execute a webdynpro app the browser gives me the following error:
'Sorry your browser/program is not supported by WebDynpro'
What happends? what can i do?
Best Regards.
Gregory.

Hi
It is possible to use this tool:
<a href="http://http://www.fiddlertool.com/dl/IE6SP2.reg">http://www.fiddlertool.com/dl/IE6SP2.reg</a>
This will make Internet Explorer 7.0 appear as if it is Internet Explorer 6.0 SP2 (the link can be found on the Internet Explorer 7.0 support page)
Then webdynpro works with no problems. (At least none I have found so far)
Peter
Message was edited by: Peter Kreiner

Similar Messages

Skype new version problem

Problem with recording device keeps coming up cant make a call

I'm not sure what error you are getting since you did not post one. If you are referring to the Windows desktop version of Skype, you can try this removal/repair tool and see if it will fix it.
http://www.pcdust.com/Downloads/SRT/SRT.exe
Reboot, then try to install Skype again.

Iphoto 9.3 new version problems on installing alone

I also just downloaded the new upgrade 9.3 for Iphone and istalled it, now it seems endless instaling and never ends ater 24 hrs still pending to conclude its instalation. I have some 65,000 files of pictures and cant access them and Iphoto 9.3 is not installing on my Macbook Pro as an upgrade or concluds installation??? any thing im missing or a bug on this new upgrade??? Please reply to my [email protected] need help soon

Hi Joachim. I experienced the same problems, under a new account iPhote 9.3 worked properly but under my own account it only stalled and nothing seem to work.
I quited all the applications, in the top menu bar, that my MacBook Pro was running like Pingo, Alfred, Calender, Caffeine, and others.
I Started iPhoto 9.3, selected upgrade and within seconds it worked (I have a small photo library of 0,6 Gb), no photo's lost. iPhoto askes to reconnect to Facebook and for access to the keyhanger of my MacBook Pro and it all workes fine.

Hello, Sorry I have this new version problema. Ustanovil mozily are no longer automatically load images in the settings of this feature is enabled.

Здравствуйте, извините у меня такой вопрос. Я установил последнюю версию мозилы, и у браузер перестал автоматически открывать изображения, данная функция включена в настройках.

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
*https://support.mozilla.com/kb/Images+or+animations+do+not+show
*http://kb.mozillazine.org/Images_or_animations_do_not_load

My Mozzilla crashed: "We're Sorry....Firefox had a problem..." I download the new version and it is still giving me the crash report.

My Mozzilla crashed: "We're Sorry....Firefox had a problem..." I download the new version and it is still giving me the crash report.
I tried to loading in "safe mode" but I still could not open Firefox.
I never received a crash i.d.

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

Please authorize ADE 3 with same credentials that you used with older version of ADE

Problems with Itunes New Version?

Problems with Itunes New Version?
Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
<edited by host>
Thanks,
<edited by host>
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 1
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 0
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0

There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Problems Installing the new version 7 of itunes

I upgraded itunes to the new version 7.0 and when I try to load itunes I get a message "Quick time version 7.1 is installed Itunes requires version 7.1.3 or later version be installed. In the Itunes version 7 you automatic load the new quick time version 7.1.3 with the package. During loading Itunes version 7 I get a message add new missing files or repair damaged files. I select yes, the second choice is to uninstall Itunes. No luck still got the same message above. I tried uninstalling Itunes to see if there was a problem with the oirginal install, still recevied the repair files or add missing files message while downloading. Have also tried installing quick time version 7.1.3 sperately. Nothing seems to work. Any suggestions???
Seems to be this upgrade... I can start quick time and I get the error message when I try and load Itunes?? Can anyone help out??

I was able to fix my problem by going into add and delete programs. Select itunes and there will be an area "click here for support infomation" Check and run repair. Do this for both Itunes and Quick Time, but do Quick time first. After I did that itunes came right up and started to run. Good Luck!!

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

Problem with Mappings in the new Version of NWDS

Hello all,
i have a process which created in the NWDS (Version: SAP Enhancement Package 1 for SAP NetWeaver 7.1 SP00 PAT0000) checked in the CVS.
Now i have the process checked out of the CVS in the new Version of NWDS (Version: SAP Enhancement Package 1 for SAP NetWeaver Developer Studio 7.1 SP01 PAT0003).
The process contains a automated activity and on the output mapping from the webservice is now n error. The Error: "Expected 'com.sap.dictionary.string,ns=.... Found list of 'char10,ns=..." I´ve changed nothing and the input mapping and the other mappings are all right. I checked out again the same process in the "old" Version of NWDS and it works fine.
Knows somebody how i can "import" n process from an older Version of NWDS into the new Version?
Kind regards,
Bastian

Hi Bastian,
The problem you are facing is a trivial problem. You need not worry about the importing the whole development component again. Rather your mapping error can be removed by changing the context in webdynpro perspective easily.
Your error is telling that the automated activity requires a string paramenter and what it has found is a list of parameters.
What this means is in the Webdynpro context, the mapping which you have done has problems.
The webservice input requires a singleton parameter. If you look into the mapping view, you will notice a single icon for the node which you are mapping.
And what you are sending is a list (not a singletion node)
If you see from the left side from where the parameters is coming in you will notice multiple icons (stack on top of each other) representing non singleton nodes ie cardinatlity is 0...n or 1..n)
So to remove the problem just go to component controller of the view and change the context setting
Colletion cardinality of 0..1 or 1..1 and selection cardinality to 0..1 or 1..1 of the node.
Thnks

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu).

New version of Itunes is having problems with crossfading songs, it doesn´t work. How do I fix that?

I installed the new version of Itunes (10.5.2.11) and I have a party playlist in wich I need the songs to crossfade for the music to continue playing non-stop. The problem is that even when the crossfade option is activated, it doesn´t crossfade songs. And when it does, the last song played, keeds playing in backgroung from star, so you hear 2 songs at the same time.
Also, I uninstalled the current version an installed an older version, but it won´t let me open the program, becouse "the iTunes Library was created in a newer vewrsion"
HELP PLEASE!!!!
Diego

It seems that this is a MAJOR issue with MANY end users experiencing the exact same problem - iTunes 10.5.2.11 Crossfade is completely buggy. Apple, get it together, seriously...your QA department should all be fired for this.
Diego, there are numerous threads replicating your problem.
So far, there are a few work arounds:
https://discussions.apple.com/thread/3408812?start=0&tstart=0
One thing to keep in mind, at least what has worked for me: After you make a change to the crossfade timing, you must close out of iTunes and re-open before the new settings take place.
Crossfade timing = 12 seconds actually equates to about 50 seconds.
Click the slider, then use your arrow key to tick over about 20 times - this should crossfade your songs approximately 6 seconds before ending.
Apply, then close out and re-open iTunes...
Peruse through the link above, there are different approaches. Maybe one will work for you.
<Edited by Host>

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain.

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

IE New version problem

Similar Messages

Maybe you are looking for