IE Scolling/Lag issues with IWeb Published Site

Has anyone had any issues with scrolling/lag with Internet Explorer on an iWeb published site? I have a site that runs great on Firefox and safari but terrible on Internet Explorer. I'm thinking it may be the template/design i used?
Anyone every seen this? Any suggestions?
Thanks,
JC

I've only ever used the Modern Frame, so I can't say if there would be a performance issue using a different template. I have about three pictures on each page.
I noticed on your site that you're using the "reflection" effect on some of your pictures. Just for the purpose of testing, perhaps you could try turning off that effect and then re-uploading your site to see if that is causing some of the problem? I believe the reflection is rendered using javascript code, which may be causing the poor performance in IE. If that does turn out to be the problem, you can decide whether it's worth it to keep the effect or not.
By the way, I don't get that same error message in IE when I open your Videos page. Maybe it's caused by a security setting in your IE being set at a more restrictive level?

Similar Messages

IWeb not opening after some issues with an existing site...

Hi there~
I’m a relatively new Mac user and a former PC/Dreamweaver user. I’m having a bit of an issue with iWeb. I’ll do my best to keep what happened relatively brief:
1. I had created and published a site a couple of months ago, but the page that contained photo albums seemed to have become corrupted. Every time I tried to open that page, iWeb would crash.
2. I recreated that page but then was not able to delete the corrupted version. So I recreated the whole site.
3. I published the new site, and everything seemed to be working well in the live version.
4. To avoid confusion in the future, I wanted to get rid of the old site. When I deleted that site, I saw that it said something about deleting it from the Web as well. I realized that this may cause problems because most of the pages would have the same names, but I was hopeful that since the new site had all of the pages I could just republish.
5. The new site did indeed get messed up after I deleted the old site. So I set the new site to republish, and then I got an error message.
6. I figured just for safety’s sake I would undo the deletion of the old site and just leave it for a while in the hopes that the new site would then work again.
7. After I did this, the old files reappeared, but then iWeb froze. (I think... My memory is a little fuzzy here...)
8. I closed and reopened iWeb, but all that appeared was that little right-hand box that lets you see the properties of certain things (Page, Photos, Text, etc). I also restarted the computer, and now when I open iWeb, that little box is still all that I’m getting.
I grabbed what I could from the live version and my history files so that I can recreate the site from scratch if I need to, so I’m not terribly worried about getting my files back. I did have another site created in iWeb that seemed to be fine, it would be nice to not have to start over with that one, but obviously I can if needed. Maybe those files can be found elsewhere on my computer?
So will I be able to get iWeb back? Do I need to reinstall it? If so, how do I do that? (Maybe that’s a question for another forum. iLife was installed on the Mac when we got it, I looked briefly for the files on the Applications CD but got a little scared off when I saw something about bundled applications...)
Thanks so much for any help. I called tech support and was directed here, this is new for me, so I hope I’m going about this in the right way. I’ll spend some time looking around to see if anyone has addressed this elsewhere, I just wanted to get things down while it was all relatively fresh in my head.
Thank you!
Jen

Welcome to the Apple Discussions.
. Every time I tried to open that page,
That sounds like the problem described here with potential fixes: iWeb & iWork: Applications may suddenly quit after updating to Mac OS X v10.6.2. This is another possible fix: The million dollar trick or how to fix iWeb in 10.6.2
OT

Photo file issues with iWeb and Aperture....also too much duplicating!!

A little background, before I get into my iWeb issue.....
Years ago I tried iPhoto, but I didn't like how it duplicated all my photo files and I wasn't very fond of the file structure it created. Years later (last month) I got Aperture. Aperture (still has a long way to go) also duplicates all your files and places them in their own file structure. If I can get along with Aperture (and if it will get along with my other programs), I won't mind putting all my files into the file structure it creates. But for now, I still have my original files in the original file structure I have had for many years as a back up.
On to my issue with iWeb and Aperture....
To add photos to iWeb, you can either go into the iWeb media center or you can drag and drop photos from other locations.
1st: iWeb media center
To get my photos into the media center, I would have to load them into iPhoto (iP 6 does allow you to keep your original file structure, but it still creates .jpg files, which fills up your hard-drive. More duplicates I don't need or want). So that is out for me. iP6 will let you view and use your Raw files.
Another way is to drag and drop your file structure directly into the media center window. I don't think this duplicates any files (at least I haven't been able to find any), but it takes an awfully long time to thumbnail all your photos (several hours and still waiting for 22K + files). Also, it won't show any Raw files. Again, out for me.
Aperture won't let you drag and drop its library into the media center at all. So if I was to move all my files into the Aperture Library, I wouldn't be able to access them for iWeb at all.....Out for me.
2nd: Drag and Drop
I was able to drag and drop Raw files directly into iWeb from C1 Pro, Adobe Bridge and Adobe Lightroom.
As I said before, I am trying to move over to Aperture. However, Aperture won't let me drag and drop photos. What is the deal here??? These are both Apple programs and they won't play nice with each other. Very annoying.
Anyway, I put a link below to my iWeb test webpage I made. All the photos were Raw files that I did a drag and drop from C1 Pro, Adobe Bridge and Lightroom. There were no problems with the publishing.
http://web.mac.com/phil_navarro/iWeb/Site%202/Drag%20and%20Drop%20test.html
So, does anyone know if they can get photos from Aperture to work?? Thanks for any responses.
Phil
G5 Desktop Mac OS X (10.4.4)

Jedi,
Perhaps you are right.
I am not a web developer and I will never be. I don't feel like spending countless hours learning how to use Dreamweaver or some other Pro web app. iWeb looked like a way to start making websites of my photos for my friends and family (much easier and better than Home Page on .Mac). All I was asking was for a way to drag and drop my photos (especially Raw files) with Aperture. Which I can do with Lightroom, Adobe Bridge and C1 Pro, and without using iPhoto.
I am not a Pro photographer either, but I purchased Aperture based on what was advertised on the Apple website. From that ad, Aperture fit my photo needs almost to a tee. I am looking to adjust Raw files, Crop, Archive and keep my use of Hard Disk space down to a minimum. I can use Photoshop for the other 5% of things I do. However, Aperture has some issues (if you own it, then you already know. If you don't, you can read the Aperture Forum) This is one of the reasons I never went to iPhoto for archiving. I didn't like the way it duplicated all my files, taking up more disk space and its file structure. So even though Aperture won't play nice with other programs, I was surprised that it wouldn't play nice with any Apple programs.
After reading your post and based on what you are saying, everyone either needs to have/learn/use Pro apps only or have/learn/use iApps only. Don't Cross the Streams!!
I guess that means Apple will need to fix DVD Studio Pro. It uses photos that are in your iPhoto library and music from iTunes (iApps in a Pro app??....for shame...."it was never intended"). Also, DVD SP won't read the Aperture library. Does that mean there are 3 platforms? Pro, iApp and Mediocre??
Now I have 2 questions:
1. Can someone please tell me which apps are Pro and iApp, or if there is Mediocre? I don't want to mix them up and "Cross the Streams".
2. Again....is there anyway to use Aperture with iWeb?
TIA,
Narvon

Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file? Having issues with viewing published projects due to this.

Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file? Having issues with viewing published projects due to this. Would be thankful fo rany/all advice.

I'm having the same issue. I've been able to work around it by opening the txt file and copying the contents. Then I open a new file in Sublime Text 2, paste the contents and save the new file as "project.json". It seems to work, but it'd been nice if I didn't have to do this everytime I publish a new project.

SERIOUS lag issues with Intel iMac

Hello everyone,
I'm pretty frustrated right now. I've been having this serious lag issue with my new iMac for the past few days. I think it may have started after I ran the last security update.
What happens:
When switching between apps, the system will hang for 1-3 seconds between doing anything. This includes typing, mouse requests, etc. It's VERY frustrating. I have activity monitor open currently, and I am seeing both Safari and SystemUIServer hogging up the CPU resources like CRAZY. I've even seen Safari recently give a CPU usage of 120%, right before I loaded this webpage. tis isn't just centralized to Safari too.... I have the following apps running:
Adium 0.89.1
FoireFox 1.5.0.8
Safari
Activity Monitor
My Memory stats currently are:
175MB Wired
708MB Active
618MB Inactive
1.47GB Used
There should be no reason I'm getting these lags with just two web browsers and a chat client open.
Has anyone else expierenced the lags?? Any suggestions? I'm almost ready to reinstall OS X and not run the last security update. Thanks
iMac 1.83 GHz Core Duo Mac OS X (10.4.8) 1.5GB RAM, Extermal LaCie 160GB FW Porsche Drive, Griffin iMate, iPod Min 4GB, JBL Creature Speakers

Hello Matthew
Are you running any maintenance scripts on a regular basis?
http://www.thexlab.com/faqs/maintscripts.html
I would manually run this script from The X Lab, and my load times would improve greatly. The problem was, I would forget to run them untill I noticed web pages loading slow or iTunes and iPhoto taking for ever. It wasn't untill someone here in discussions suggested Anacron that I saw the light. WOW what a difference Anacron has been making in my overall system speed. My iMac has not been shutdown for 11days 5hrs 34mins (sleep or use only) and opening new App's, switching App's and web pages load as fast or faster than after a fresh start up. If your system is operating properly and you are having only what seems to be a slow or sluggish issue Anacron will make a difference.
http://members.cox.net/18james/anacron-tiger.html
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.8) Maxtor 300GB FireWire 2G Nano

Directory of iWeb published sites

A friend and I are interested in viewing other iWeb published sites. Is there a directory of such?
Geraldine

Hi Geraldine,
Check this out http://www.iwebusersites.com/
Vonz.

Strange issue with iWeb site, please help

Hi everyone,
Until recently, I've been keeping an iWeb blog of my time in India. Nothing too complicated, just stories and photo albums. However, recently something strange has happened, and the website is no longer displaying correctly. It looks fine in iWeb, and when I publish it in a folder and open it locally, everything is fine. However, after uploading it to my hosting provider, it looks like this:
http://www.egbertopreis.nl/India/
(screenshot of what it looks like here: http://egbertopreis.nl/website_screenshot.PNG )
This is a screenshot from iWeb of what it should look like: http://www.egbertopreis.nl/iWeb_screenshot.png
I'm using the 'darkroom' theme, but as you can see, something is clearly wrong. It is not displaying the menu correctly, the layout looks strange and it isn't loading any of the articles. The other pages are accessible if you navigate there directly, but there you have the same problem.
It looks like, for some reason, the CSS and javascript elements cannot be loaded, although I have no idea why this might be the case. They are all just static files, and it worked fine until about a week ago.
Although I'm an IT professional, I have literally no idea what could cause a problem like this. I went with iWeb because I wanted to use an 'easy' solution and not over-engineer something for once
Usually what I'd do in a situation like this, is just purge the whole site and re-upload it. However, since I'm traveling around, I don't have fast internet access anywhere and the site is now so large that it would take forever to completely re-upload. This is also the reason why I can't troubleshoot it properly myself...
Any help (or even words of encouragement :-)) whatsoever would be extremely welcome. Thanks in advance!
Message was edited by: Heliode
Edit: Forgot to mention what I already tried myself;
- deleted the HTML and XML files and let iWeb do 'publish changes'. Everything was re-uploadeded, but issue remained.
- Deleted the 'Scripts' folder on the remote host, and manually re-uploaded from locally published folder. No effect.
- Tried randomly changing layout items in the hope that any potentially corrupted files might be overwritten after publishing. No effect.

Hi Roddy, thanks for your reply. It wasn't just me though; a lot of other people from back also reported the same issue. I was also getting the same thing from behind a wired connection. You can still see and experience the issue yourself if you look here.
I've since 'resolved' the issue by getting a .Mac trial account. A friend helped me move the whole blog over there, where the site works as it is supposed to:
http://web.me.com/eggmeister/India/
Therefore the issue has to be with the hosting. Right now I'm suspecting it might be some obscure configuration issue with the hosting company's server. Maybe something like too low a setting for Apache's 'MAX REQUESTS'. This might cause issues with all the javascript going on in the iWeb pages, loading elements back and forth. I'm in contact with the hosting provider, and will let you know what I find. Might be useful for future reference.

IE issue with iWeb site

1) Images don't load
2) in IE 8 : HTML email snippet does not show up
How can this be resolved?

Hi Roddy, thanks for your reply. It wasn't just me though; a lot of other people from back also reported the same issue. I was also getting the same thing from behind a wired connection. You can still see and experience the issue yourself if you look here.
I've since 'resolved' the issue by getting a .Mac trial account. A friend helped me move the whole blog over there, where the site works as it is supposed to:
http://web.me.com/eggmeister/India/
Therefore the issue has to be with the hosting. Right now I'm suspecting it might be some obscure configuration issue with the hosting company's server. Maybe something like too low a setting for Apache's 'MAX REQUESTS'. This might cause issues with all the javascript going on in the iWeb pages, loading elements back and forth. I'm in contact with the hosting provider, and will let you know what I find. Might be useful for future reference.

IWeb published site different than designed

I scrolled through numerous pages and was surprised I did not see this problem already described.
I design a simple (though long) page using iWeb. Text and images only. The images are embedded, but non are overlapping. It looks great as I am working on it in the iWeb window. I publish it to a folder on my laptop then view either by using "visit published site" or going to the directory and firing up the index.html. There are lots of problems - images have been moved, fonts are wrong (there looks to be a "format persistence" problem -- a type or size will continue for a few extra words. I edit, making sure the fonts are the ones I want and re-publish with the same poor results. Not very WYSIWYG at all! I'd try to edit the html code, taking the iWeb written stuff as a pretty good start, but it is not very pretty html.
So, at this point iWeb is a completely useless program! As many others are using it without this problem, there must be some solution. Anyone had this issue and found a way to fix it?
thanks

What is the web address of the published site so we can see what you are referring to?
While waiting for that:
A common reason why formatting on a published page will not match what you see in iWeb is that objects (pictures, movies, text boxes, etc.) are overlapping. When the web browser goes to try and interpret that overlap the results can vary (this can effect the display of fonts as well).
Go to the page in question in iWeb and click on 1 object. Go to Edit > Select All.
You will see all the objects on the page with their boundaries activated. Move any items that are overlapping so they have their own space around them.

Problems with iWeb publishing to MobileMe

Hi,
Did you have some problems since about four days on publishing with iWeb to MobileMe? In my case, when I publish my site - and I made just little changes - iWeb publish ALL the pages.
I early had this same problem, this spring, and it was a MobileMe problem; Apple just made a little update to the server and it was ok.
I'm using iWeb'09
Thanks

With a lot of media content have you considered other ways of adding movies or audio tracks that only require you uploading those file manually once and then linking to them. For movies this demo page has one possible method: Opening Item in a New, Precisely Sized Window. This demo page has 7 movies added that way. They don't load until the play button is selected. PhotoPresenter Animated Slideshow Themes
For audio you can use flash players or a flash jutebox. Roddy's site, iWeb for Musicians, has examples and how-to's for both. See the following pages: Music Players and the following 3 pages after it. See the Next Page button at the bottom.
I've got a couple of flash players on my demo page: Music Players.
There are many alternatives to having to load all the media each time you republish.
OT

Remove existing website content and replace with iweb 08 site

Hi
I have an existing website (not iweb) on personal domain name that needs complete overhaul - I want to replace it with an iweb 08 site using same personal domain name. I am new to the mac world having converted a few months ago - also don't know html code etc.
How do I remove the existing web content to make way for the iweb site using the same domain name - do I download folder using cyberduck and delete content from public_html folder - will this clear the way for new site to be published via iweb and .mac ??
Any help and guidance appreciated
Thanks

I think what you are asking might be better put this way:
"When published, will my current Domain name automatically go to the new site, and if not, what do I need to do to make it so?"
The answer is no, it won't. If Web City is also your Domain name registrar, then you will either have to transfer it for use with .Mac, or forward the Domain to the .Mac url.
I have not personally transferred any of my Domain names to .Mac, but I don't believe it is hard to do. You can go into System Preferences on your machine, click on the .Mac icon, navigate to "Account info/Personal Domain", and go from there.
There are many here who have already done this so I'm sure someone will chime in and lend a hand if you run into difficulties.
Mark

IWeb Publishes Site...

Then when visiting - the site is not updated to the version that was just "published." This is the first problem I have had with iWeb. I have published in the same manner time and time again without problem. What is going on?
Specifically...
New blog entries are said to be published by iWeb - but the site does not have navigation for the new blogs. Very frustrating.

Watch this thread:
http://discussions.apple.com/thread.jspa?threadID=1648976&tstart=0
What localization are you running?

Issue with Internet facing site and Intranet sites

Hello All,
I have migrated the SP2013 environment using database attach method for our intranet site. We also working on the
SP2013 Internet facing site using the same content database as Internet site.
When I extended the web application for Internet facing site, zone to
Internet and these are the URLs: The Intranet website URL is
https://intranet.contoso.com/SitePages/home.aspx (Root Site) and
SP2013 Internet facing site http://contoso.com (not a root site and publishing site template)
However, I found on the http://contoso.com users can still access the
http://contoso.com/SitePages/home with same content as Intranet.
After done some Google search, bloggers mentioned to have move https://intranet.contoso.com/SitePages/home.aspx to another site collection so that Internet facing site can exist root site.
Can 2 we have to two root sites in same web application? I need the content database to be same so that managers can check
Internet facing site and after signing into SP2013, redirects to
Internet site.
Which is the best option to achieve this with same content database.
Please advice.
Regards,
Aroh
Aroh Shukla

Business Requirement:
Content Managers want to control internal Internet site (https://intranet.contoso.com) (with default zone, port 443, Root site) and also want to have SP2013 Internet site (with Internet zone
http://www.contoso.com (not a root site and publishing site template)), Anonymous access at Web Application level. I configured the site architecture
to have intranet zone as default zone and extended Web Application for Internet facing site with Anonymous site. This the current site architecture
Because content managers do not want to duplicate public site (Internet facing site) with will be shared with some lists that are stored in intranet site.
For e.g. a sub site named “News and Events” will be shared with Public site as well as Internet users. Therefore, if a manger wants to update a list in the public site, it should reflect in intranet site as well. Thus, managers
don’t want to have separate database but same content database.
Problem:
I have extended web application to have different Internet zone, the site URL looks this: http://www.contoso.com/sites/public with publishing template and Anonymous access. Managers want to have public site URL to be just
http://www.contoso.com and not   http://www.contoso.com/SitePages/Home.aspx. As I am using path based site collection for extending site collection, I am
getting this URL http://www.contoso.com/SitePages/Home.aspx
We also tried host named site collection, but it does not provide anonymous access and keep on asking for user credentials.
Q1: We want to have Intranet and Public site with same content database as per business requirements, Shall I following link       http://sharepoint.stackexchange.com/questions/81172/moving-content-db-for-a-site-collection-to-another-db-server?
Q2: Because I am constrained that I don’t want to have separate web application, (I know, its not regular requirement), how could achieve this requirements?
Q3: Do have to completely re-design web site architecture, with
www.contoso.com as main web application, then copy Intranet site collection and move this to
www.contoso.com/intranet using
Move-SPSite command
Any kind of pointer and help will be highly appreciated as I am struggling for 2 weeks to solve this.
Regards,
Aroh
Aroh Shukla

I'm having a big issue with scripts and sites I need.

I am an Etsy shop owner and always been able to access my shop just fine all the sudden about three weeks ago I cannot log in to my shop on ff. I can view the Etsy site but when I try to log in it just loads and loads and will not let me. I know it is the script bc I added a script turn off add on and I could log on but Etsy will not let you have it turned off to edit items if your shop so I had to download chrome just to go to my shop which is annoying, I do not like chrome.
Other than that a few more sites like creative market and a few blogs will not load anymore for me. I have already re-set and that did not work. Also I get a lot of script not responding plugin popups that freeze and crash. This is really annoying. Does anyone know a fix? Thanks..

You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and only cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Issues with BI publisher report in dashboard

Hello all,
I got some issues about BI publisher reports in a dashboard.
I use a dashboard prompt in combination with a BIP report.
1.) I don't want to see the publisher control bar in my dashboard. Now you can't view the report anymore after using the dashboard prompt. Because it says you have to press the view button which is on the publisher control bar.
So when I add the bar. Then I have first to press on go in the dashboard prompt and after that I have to press on view in the publisher control bar.
2.) When I open my dashboard I see a scroll bar in my BIP report. Now when I use the dashboard prompt, it disappears. So I can't view the entire report anymore
3.) I like to develop in english, but the test must be in dutch. Now I have a english dashboard with a dutch control bar. Also logging in to BIP in english and then navigating to analytics will not help.
4.) I can't use I-bots on BI publisher reports, or can I?
5.) This is not really an issue, but more like a problem but I want that users can view the BIP report on the dashboard only in HTML, but I want that they only can export to excel, is this possible?
Hoping for some answers ;)
Thanks in advance!
Message was edited by:
Remc0

Hi Venkat,
Thanks for your quick respond.
1.) Auto Run is enabled. And the report runs automatically as well. But then it ignores the dashboard prompt (as a regular report would do as well). But when I choose some values in the prompt and then press go. Then it says I have to press on view as well.
2.) no that is not the case. My report is so big that it always need a scroll bar ;) also adjusting the size settings in the dashboard doesn't help. The only occurs when viewing in HTML, when previewing in excel or RTF it all just work fine.
3.) true, but ow well this is the least importetant one ;) so if this doesn't work, than it doesn't work ;)
4.) Ok, I will have a look on that.
5.) I did enabled HTML and EXCEL outputs in my BIP report. But when the first point is working, then I don't want to see the control bar anymore and I want to have the output on the dashboard in HTML and then I want to build a button, or a link or something that exports the request to excel. Is that possible?

IE Scolling/Lag issues with IWeb Published Site

Similar Messages

Maybe you are looking for