IE Update Best Remedy

Hi, I'm fairly new to flash and I have several sites that are
effected by this IE Update with Microsoft. I'm currently using
Flash MX. I'm not sure if I need to update my Flash program, the
existing SWF's, the HTML, or all of the above. What is the best way
to get rid of activating every instance of Flash on a web page?
Thanks for your future help,
Chaz

you describe a problem associated *only* with the latest
version of IE - search google or this forum
for "active content" - a couple hundred threads will be found
here alone.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Chaz03 wrote:
> Sorry, I am usually not specific enough on my first
round of questioning. I
> need my websites to work across all major browsers. It's
not my personal
> problem of viewing the sites, but making the sites that
I create viewable by
> all. I don't want to be that webmaster that get's the
emails--ya know?!
>
> This might be more applicable for another thread, but I
figured I would start
> here...please advise also if I am in the wrong place.
>
> Thanks again
>

Similar Messages

EJB3 entity bean update, best practice

I have an ejb3 entity bean that models a time that can be reserved in a booking system.
I need a way to reserve the time for a specific user. Ofcourse the reservation should not overwrite if the time has already been reserved by another user.
What is the best/cleaneste way to provide this service?
I have thought of the following ways.
I could put a version field on the entity. When the user is set in the frontend the entitybean will check that the time is not already reserved. If not it will be sent backup to the stateless session bean for persisting. If the time has been reserved by another user in the meantime JPA will throw an exception since the version doesn't match any more. The frontend can then show the error to the user.
I could make the frontend call a method in a stateless session bean to reserve the time. The function could take the times primary id and the users primary id and loaded them from persistence. Then check if the time is already reserver else set the user and persist the time again. This should ofcourse be within a transaction and possibly also use a version attribute on the entity.

Only fields detected as persistent-dirty will be updated in the database record.
Laurent

App-V package update best way to deploy?

Hello<o:p></o:p>
I have updated for an App-V 5 package that is currently targeted to users via
an application deployment with an WMI AD Group membership query.<o:p></o:p>
What is best way for current users to receive the updated APP-V package ? Do I simply
run update content wizard on the application deployment? Or do I need to
create a new application deployment that supersedes & uninstalls the
current application deployment?<o:p></o:p>
Thank you.
<o:p>Nick</o:p>

Basically for a version number change add in a supersede rule to supersede the previous version and delete the deployment to the previous release (not an uninstall).
If just a change to the xml then just update the content to the DP.
Cheers
Paul | sccmentor.wordpress.com

IOS Update Best Practices for Business Devices

We're trying to figure out some best practices for doing iOS software updates to business devices. Our devices are scattered across 24 hospitals and parts of two states. Going forward there might be hundreds of iOS devices at each facility. Apple has tools for doing this in a smaller setting with a limited network, but to my knowledge, nothing (yet) for a larger implementation. I know configurator can be used to do iOS updates. I found this online:
https://www.youtube.com/watch?v=6QPbZG3e-Uc
I'm thinking the approach to take for the time being would be to have a mobile sync station setup with configurator for use at each facility. The station would be moved throughout the facility to perform updates to the various devices. Thought I'd see if anyone has tried this approach, or has any other ideas for dealing with device software updates. Thanks in advance.

Hi Bonesaw1962,
We've had our staff and students run iOS updates OTA via Settings -> Software Update. In the past, we put a DNS block on Apple's update servers to prevent users from updating iOS (like last fall when iOS 7 was first released). By blocking mesu.apple com, the iPads weren't able to check for or install any iOS software updates. We waited until iOS 7.0.3 was released before we removed the block to mesu.apple.com at which point we told users if they wanted to update to iOS 7 they could do so OTA. We used our MDM to run reports periodically to see how many people updated to iOS 7 and how many stayed on iOS 6. As time went on, just about everyone updated on their own.
If you go this route (depending on the number of devices you have), you may want to take a look at Caching Server 2 to help with the network load https://www.apple.com/osx/server/features/#caching-server . From Apple's website, "When a user on your network downloads new software from Apple, a copy is automatically stored on your server. So the next time other users on your network update or download that same software, they actually access it from inside the network."
I wish there was a way for MDMs to manage iOS updates, but unfortunately Apple hasn't made this feature available to MDM providers. I've given this feedback to our Apple SE, but haven't heard if it is being considered or not. Keeping fingers crossed.
Hope this helps. Let us know what you decide on and keep us posted on the progress. Good luck!!
~Joe

DW8 update - best plan ?

I want to update from DWMX to DW8 AND have a new PC AND
re-locate to
Cyprus - all within a couple of weeks of each other probably.
My quandary is how best to do the upgrade as I'm a little
uncertain as to
what will be available in Cyprus. I cannot take a PC with me
so the new one
will have to be obtained in Cyprus. Here's the question.
When you upgrade does the "old" DW version (DWMX) have to be
sitting on your
machine so that the upgrade process can recognise it. In this
case I would
have to take my installation disks with me, install them on a
new machine
then install the upgrade. My DWMX was itself an upgrade from
DW3 - the disk
for which I probably don't have any longer !
Alternatively is it sufficient to have the DWMX serial
numbers available,
entering which willl be sufficient for the upgrade process to
be recognised.
In this case I wouldn't need to take the DWMX installation
disks with me.

I was able to upgrade from MX to 8 on a new computer by
supplying the serial
number of the MX installation.
Just remember to uninstall MX on the old computer because
this is
technically the same license (or a renewed one) for one copy
of DW.
"Dave Farmer" <[email protected]> wrote in
message
news:ej2p73$27m$[email protected]..
>
> I want to update from DWMX to DW8 AND have a new PC AND
re-locate to
> Cyprus - all within a couple of weeks of each other
probably.
>
> My quandary is how best to do the upgrade as I'm a
little uncertain as to
> what will be available in Cyprus. I cannot take a PC
with me so the new
> one will have to be obtained in Cyprus. Here's the
question.
>
> When you upgrade does the "old" DW version (DWMX) have
to be sitting on
> your machine so that the upgrade process can recognise
it. In this case I
> would have to take my installation disks with me,
install them on a new
> machine then install the upgrade. My DWMX was itself an
upgrade from DW3 -
> the disk for which I probably don't have any longer !
>
> Alternatively is it sufficient to have the DWMX serial
numbers available,
> entering which willl be sufficient for the upgrade
process to be
> recognised. In this case I wouldn't need to take the
DWMX installation
> disks with me.
>
>

Exchnage sp1 to sp3 Update Best Practices?

Can someone outline Patching Best Practices?
I need to upgrade Exchnage 2010 sp1 to sp3 for my potential customer?-There are Few questions in my mind
-How do i proceed with Multi site Deployment , can i patch all CAS, MBx and Edge servers for site A and then move to site 2?
-What are things that must be taken care of while performing whole process? -I've theoretical overview of how to proceed with the Upgrade, Just wanted to make sure if
there is anything else that needs to be taken care of before performing this to production environments?
Thanks in Advance.

Hi,
In addition to Will Martin's suggestion, I would like to verify if there is a DAG in your environment. If yes, please follow the steps below to upgrade it.
1. Run the StartDagServerMaintenance.ps1 script to put the DAG member into maintenance mode and prepare it for the update rollup installation.
2. Install the update rollup.
3. Run the StopDagServerMaintenance.ps1 script to take the DAG member out of maintenance mode and put it back into production.
4. Optionally rebalance the DAG by using the RedistributeActiveDatabases.ps1 script.
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

K8N Neo4 Platinum Bios Update - Best Procedure?

I have built a new system:
K8N Neo4 Platinum Award Bios Version 1.3
ATHLON XP64 X2 4200+ E4 Stepping
2GB Transcend RAM (2x1GB)
EVGA 6600GT 128MB PCI-E
Samsung Spinpoint 200GB SATA on Sata1
Samsung TS-H522U DVD-RW
Floppy
Seventeam ST-550EAG 3.3V= 30A, 5.0V=30A, 12V1= 18A, 12V2= 18A
Windows XP Pro SP2
I'm not overclocking and DOT is disabled. Optimized parameters are loaded.
System is running but my BIOS version does not support dual core. I have installed all NForce 6.66 drivers and VGA drivers, and all Windows updates. What is the best procedure to flash bios, Winflash or MSI floppy method? What version of BIOS should i try, 1.6 or 1.8?
Thanks.

Quote from: hansh on 27-September-05, 16:34:38
Hi, when you ask 10 people about the best method to flash BIOS, you will probably get 10 different answers
Some observations:
1. Flashing under Windows has become "normal procedure" for boards of most other manufacturers; (I will not use this method for my MSI boards, though, because of the negative opinion on it in this forum. If the comments are correct, then the only conclusion can be that MSI software engineers are at present not able to deliver a Window-based flashing program with which MSI-BIOSes can be flashed into MSI boards in a safe way. I'd rather not find out the exact reason for this . I have used Windows-based flashing programs numerous times with boards from other manufacturers - Abit, Asus, Soltek, ECS, etc. without any problem).
2. If the procedure as described by Syar really has significant advantages over "plain flashing", then it means that either the BIOSes are flaky, or the boards are instable. Such precautions have never been necessary and should not be necessary! I can only recommend - just to be on the safe side - that, while flashing, you dance around the computer, carrying two carrots, an onion and chanting "Flash! Flash! Flash!
3. There is something to say for not flashing from a floppy. Floppies are the oldest part of nowadays computers and the medium is probably the least failsafe part ... Therefore I have reserved a small (100 MB) FAT32 partition on a HDD, BIOS files and most recent flashing program will be copied to that partition. I will start the PC with a W98SE bootflop, go to that partition and flash from there. I have used this method a great number of times over the years, I will never add any switch when running the program.
Additional Info
Regards
Hans
Hi hansh,
thanks for that. I'll boot with a Win98 bootCD (NTFS support included) and thinking about flashing with an Iomega USB pen drive (FAT32). Any comments here?
And, blazing storm, thanks again for your valuable reply.

Update Hierarchy Acrobat 9.x/Update Best Practices?

Because of the many problems with Acrobat that seem to be caused by updates, I find it is common that I have to reinstall Acrobat (we are using 9) on someones machine.
Our installer disc/files are Acrobat 9, missing of course all the updates. I typically run the updates seperately as I have them already downloaded...but I have been going in each step (9.12, 9.13, 9.14, etc.) which takes forever. By my count, I have 14 updates that need installed one by one after I install Acrobat. This is very time consuming.
Is there any idea or list of what updates I can skip b/c their fixes are included in the next release? Or, better yet is there a way that I can download a full installer of 9.4.4 or w/e is current that works with my 9.x activation keys?
Wondering what other system admins do with the growing updates for this application.

how would one create an installer as you mentioned? I created a batch file to install each update silently one at a time, but it is still a pain b/c if you don't disable UAC, you sit there and press continue every time...not ideal for widespread use.

JDBC / SQL Update Best Practice

My application updates a database table whenever a user modifies their profile.
I have two questions on this...
1. I've chosen to use PreparedStatements purely because it means I don't have to worry about special characters (e.g. '%"? in my data), and not because I re-use the statements. Is this a respected approach?
2. Is it worth dynamcially building the update SQL and adding paramaters because in most cases only a subset of the possible fields will be modified? (e.g. avoid setting col1="test" if col1 already equals "test"). Is there an acknowledged pattern / algorithm / library that does this?
Thanks,
Steve

My application updates a database table whenever a
user modifies their profile.
I have two questions on this...
1. I've chosen to use PreparedStatements purely
because it means I don't have to worry about special
characters (e.g. '%"? in my data), and not because I
re-use the statements. Is this a respected approach?Yes.
>
2. Is it worth dynamcially building the update SQL
and adding paramaters because in most cases only a
subset of the possible fields will be modified? Probably not. The only time this is going to matter is if there is a significantly sized field (like a blob) that often does not get updated. In that case you would probably want to exclude that.
(e.g. avoid setting col1="test" if col1 already equals
"test"). Is there an acknowledged pattern / algorithm
/ library that does this?Officially not as far as I know.
There are several patterns that I have used.
1. A modified flag for each field. If the set method is called then the flag is set to true.
2. A modified flag for each field. If the set method is called then the new value is compared to the old and the flag is set depending on the outcome.
3. The database layer holds (or retrieves) the previous data. It compares the two, noting the fields that have changed.
In the above note that primary keys must be dealt with. Usually the primary key is either set or not set. If not set then it is a new record. If set then it is an update.

Piloting Software Updates Best Practices

Hello All
I am in the process of configuring our Software Updates infrastructure. My plan is to deploy patch Tuesday updates first to a Pilot Group (Collection) and then to what I will call Production group (Collection). Now when it comes to the pilot phase of software
update testing of course we are just trying to see if any updates may prove problematic. Are there any other extensive testing methods or tips anyone use. Any helpful info would be appreciated.
Thanks,
Phillip
Phil Balderos

Generally, folks let the pilot users know that updates are coming and to do their normal "thing(s)". If there is something business critical, then having them test that would also be prudent. The pilot users should be representative of a broad
cross-section of users to try to catch any issues among all of the various tasks that go on. Getting informed pilot users involved is of course helpful also so that they can provide relevant and pertinent feedback. At the end of the day though, there are no
guarantees so you should stress this management.
Jason | http://blog.configmgrftw.com | @jasonsandys

HT5550 prompting for old owners acct info when trying to update. Remedy?

I bought a second-hand MBP with FCP and when "Updates are Available," old owners Apple account pops up and I can't update. Is there a way to transfer ownership or do I need to purchase again using my ID?

Ideally you would have formatted and started fresh when you got the computer. If you're using his purchases from the App Store you are out of luck unless you have the credentials.

Updated: Best of the Best Program

The Best of the Best program highlights and celebrates the valuable content posted by members of the Verizon Wireless Community.
Six (6) BOTB members will be recognized in the following individual categories with BOTB Ribbons on a bi-weekly basis.
Best of the Best Individual Categories:
Most Helpful Member
Most Noteworthy Quote
Post of the Week
Best of the Best Group Category:
Thread of the Week (if available)
Get involved with the BOTB program!
If you would like to nominate members for any of the categories mentioned above please private message* this inbox and provide the following information:
-The member's profile (URL)
-The category in which you wish to nominate the member for (Most Helpful Member, Most Noteworthy -Quote or Post of the Week)
-The URL to the message that you are nominating them for (URL)
-The reason you are nominating them and why they should win
*BOTB messages go out every other Tuesday starting August 16th, 2011. Nominations must be in the Friday before the BOTB message goes out. Please contact us with any questions!

Hi chuck,
if you would feed both arrays to the table you would also see all those strings in the table
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Faullt Display.vi ‏8 KB

Verizon is the 4.3 update causing problems with my phone because my phone is having problems

I have been having multiple problems with my GS3 since the 4.3 update including wifi connection issues dropped and frozen calls frequent unmounting of my sd card bluetooth problems to site the worst. I have updated and reset my router checked and reset my phone settings multiple times taken my baterry out of my phone 2 a day on average turned my phone off multiple times a day to reset it. I am now wondering what will fix all these problems because nothing i have read from your forums has done anything, how much longer do i have to pay full monthly prices for services i can no longer full monthly access?

Your phone is a mini computer, no matter what os it runs.
Software updates from various developers , patch and patch again. Adding to the original App software already on your device. Not only do updates apps take up more room on your device with each update, but imperfect updates and the communication with other services on your phone lead to many software "glitches".   When there are major software errors, the best remedy is to clean it out and start it fresh.
It is recommended for Apple devices suffering from battery life problems, app crashes, lack of device storage and other issues after the iOS 7 update.
Android devices are no different.
It is drastic, but sometimes unavoidable.   Don't forget to back up any information that is unique to the device.

NAC Agent - Loop in Remediation WSUS

Hello,
I´m implementing WSUS Posture in my ISE environment.
When NAC Agent detect a new Windows Update, the Remediation Action is Automatic. I configured Show UI the Wizard Interface and this is working well.
But, after the windows update instalation, the NAC Agent stay in Remediation Process. Looking for WindowsUpdate.log file, I see repetitive messages like:
Updates Found = 0 OR Found 0 Updates and X categories in search.
If I use the Windows Update from Windows to Search and Install the Updates, work very well too.
The image attached, ilustrate my problem(In this point, The Windows Update instalation was done):

Updating..
Approximately after 30 minutes, NAC Agent finished the process of Remediation. (Only 1 Windows Update package)
apparently the station sends many reports to WSUS and while it does, the NAC Agent continues Remediation on the process, even after installing the update.
I'm sure there are how to optimize it, but if anyone has any tips I'd appreciate it.
Best Regards,
Daniel Stefani

Indesing updated to latest version (10.0) but can't open file created yesterday.

Created a file yesterday with Indesign. Wanted to continue work today but Indesign requests to update to 10.0. I updated allready I even created this file with this version with this edition of Indesign but can't open it anyway.
- Alert shown is: Cannot open "[documentname]" because it was saved with a newer version of Adobe InDesign CC (10.0). You must use that version or later to open the file. To then enable it to be opened in this version, choose Save As InDesign CS4 or later, or export to IDML. -
So to be clear; I created this document in this version of Indesign and it just doesn't open anymore although all possible updates are performed.
Am really in need of some help since it is about two documents and I just lost work like this...
Kind regards,
Linda

Aaaaaaahhhhh....FOUND IT!! The trick is to NOT use the alias-thumb in the dock, but to actually start up in the apps-folder where the Adobe Indesign 2014 edition is installed next to the 'old' edition.
Wow. Not sure to feel stupid or to be angry... pffff...
Back to work I say! (The best remedy...)

IE Update Best Remedy

Similar Messages

Maybe you are looking for