IE01 fetching the value of referenced equipment number

Hi
in ie01 transaction i created a screen exit and placed one filed in that screen now i want to fetch the referenced equipment number(initial screeen) and placed that value into that field in the screen.
i used get parameters but no use ,
can any one tell me the procedure

Hi,
What is the screen exit you used? it seems you have simply designed a screen with just that single field.
Screen exit means it have some link with the original transaction and some data fields are available in that screen when we use that exit.
with the help of those fields we will get the extra data into the new fields what we kepp on the screen.
Check and see.
You can try the following BADi's for the screen exit
EQUI_SCR_CC
EQUI_SCR_06
EQUI_SCR_05
EQUI_SCR_04
EQUI_SCR_03
EQUI_SCR_02
EQUI_SCR_01
reward if useful.
Regards,
Anji
Message was edited by:
Anji Reddy Vangala

Similar Messages

Please help..it's Urgent..How to fetch the value from table row from Page

Hi,
I have created a table with 2 LOV's , LOV2 is dependent on LOV2.
Here I can not use the general Dependent LOV concept, as these values are coming from 2 different LookUps.
I am not able to fetch the user input for LOV1 (from page) .that is why not able to set the where cluse fro 2nd LOVVO.
I have used this code:
if ("ViolationCat".equals(lovInputSourceId)) {
OAMessageLovInputBean msglov =
(OAMessageLovInputBean)webBean.findChildRecursive("ViolationCat");
// String p_violation_category = "'"+(String)msglov.getValue(pageContext)+"'";
String p_violation_category =
(String)msglov.getValue(pageContext);
// System.out.println(" p_violation_category =" +
// p_violation_category);
String v_violation_category = "";
//System.out.println("vcat=" + vCat);
OAViewObject violationVO =
(OAViewObject)am.findViewObject("SNI_Violation_DtlsVO2");
Number vcatViolationIdnum =
(Number)violationVO.getCurrentRow().getAttribute("ViolationId");
String vcatViolationId = "" + vcatViolationIdnum;
pageContext.putTransactionValue("vcatViolationId",
vcatViolationId);
pageContext.putTransactionValue("p_violation_category",
p_violation_category);
String query =
" SELECT LOOKUP_CODE, \n" + " MEANING, \n" +
" LOOKUP_TYPE \n" +
" FROM apps.fnd_lookup_values \n" +
" WHERE LOOKUP_TYPE ='SNI_VIOLATION_CATEGORY' AND MEANING=?";
PreparedStatement ps = txn.createPreparedStatement(query, 1);
try {
ps.setString(1, p_violation_category);
ResultSet rs = ps.executeQuery();
//System.out.println("before while,");
// rs.next();
// v_violation_category = rs.getString("LOOKUP_CODE");
// System.out.println("v_violation_category="+v_violation_category);
while (rs.next()) {
//System.out.println("inside while");
v_violation_category = rs.getString("LOOKUP_CODE");
// System.out.println("v_violation_category=" +
// v_violation_category);
ps.close();
} //try ends
catch (Exception e) {
e.getMessage();
//System.out.println("in catch.." + e.getMessage());
OAViewObject subCatVO =
(OAViewObject)am.findViewObject("SNI_ViolationSubCategoryVO1");
//System.out.println("get VO before where clause: subCatVO::"+subCatVO.getQuery());
subCatVO.setWhereClause("LOOKUP_TYPE like '%SNI_VIOL_SUB_CAT_" +
v_violation_category + "'");
System.out.println("after set where clause VO: subCat VO::" +
subCatVO.getQuery());
subCatVO.executeQuery();
// System.out.println("query of subCat VO::" +
// subCatVO.getQuery());
//End of sub category Validation
It is working fine only for the 1st row of teh table.
I have tried to fetch the value using :
String violationCategory = (String)violationVO.getCurrentRow().getAttribute("ViolationCategory");
String violationSubcategory = (String)violationVO.getCurrentRow().getAttribute("ViolationSubcategory");
But it is fetching null value.
Please tell me how can I able to fetch the values.

Hi
in your scenarion,first u have to identify the particular row of table where the changes is being made ,u have to use this code .when u select the lov ,first it will give the row refernce and then u have to catch the lov event
OAApplicationModule am =
(OAApplicationModule)pageContext.getApplicationModule(webBean);
String event = pageContext.getParameter("event");
if ("<ItemPPREventName>").equals(event))
// Get the identifier of the PPR event source row
String rowReference =
262
pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
Serializable[] parameters = { rowReference };
// Pass the rowReference to a "handler" method in the application module.
am.invokeMethod("<handleSomeEvent>", parameters);
In your application module's "handler" method, add the following code to access the source row:
OARow row = (OARow)findRowByRef(rowReference);
if (row != null)
thanx
Pratap

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

Fetch the values from internal table inside an internal table (urgent!!)

data : BEGIN OF PITB2_ZLINFO occurs 0,
         BEGDA LIKE SY-DATUM,
         ENDDA LIKE SY-DATUM,
         PABRJ(4) TYPE N,                       "Payroll Year
         PABRP(2) TYPE N,                       "Pay. Period
         ZL LIKE PC2BF OCCURS 0,
       END OF PITB2_ZLINFO.
I have a internal table like this,
How to Fetch the values from internal table inside an internal table.
Kindly Help me on this..
Regards,
Ram.

Hi,
Try this....
Loop at PITB2_ZLINF0.
Loop at PITB2_ZLINF0-ZL.
endloop.
Endloop.
Thanks...
Preetham S

How to fetch the value of tabular form item in javascript

Hello all
I want to do some calculations on the value entered by the user in the textfield of a tabular form, how can I fetch the value of tabular form item in the javascript?
I am using normal tabular form, not using apex_item tabular form.
I can pass the current textfield value to the function using "this" as a parameter, but how can I fetch the value of other rows of that same column?
Thanks
Tauceef

Hi Alistair
jQuery is still not working, but I got it done through some other means, this is the code:
function total(pThis){
var l_Row = html_CascadeUpTill(pThis,'TR');
var l_Table = l_Row.parentNode;
var l_Row_next = l_Row;
var n_rows = l_Table.rows;
var lInputs;
var v1;
var sum = 0.0;
var temp;
var i = 0;
var j = 0;
//alert(n_rows.length);
while(j < (n_rows.length - 1))
temp = 0;
if(l_Row_next != null){
lInputs = html_Return_Form_Items(l_Row_next,'TEXT');
v1 = lInputs[0].value;
//alert(v1);
sum = parseFloat(sum) + parseFloat(v1);
l_Row_next = l_Row_next.nextSibling;
temp = 1;
if(temp == 0){
l_Row_next = l_Table.getElementsByTagName('TR')[1];
lInputs = html_Return_Form_Items(l_Row_next,'TEXT');
v1 = lInputs[0].value;
sum = parseFloat(sum) + parseFloat(v1);
l_Row_next = l_Row_next.nextSibling;
j= j+1;
$x('P78_TOTAL').value= parseFloat(sum);
I am calling this function onblur event of the textfield.
Still I am having one problem, I want to perform this calculation on load of the page also, how can I do that? because while calling onblur of the textfield I can pass that textfield to this function but on onLoad how I will pass the textfield to call this function so that I will be able to get the textfield value in the function?
there may be some rows already existing, so I want the total of the existing rows to be displayed in my P78_TOTAL textfield that is why I need to do this calculation on onLoad of the page.
Thanks
Tauceef
Edited by: Tauceef on Jul 8, 2010 4:57 AM

When I quit itunes it restarts again with the dot under the itunes logo but the iTunes window doesn't open until I click the icon on the dock. Also in the middle of the size vale in the size column the value starts with a number then a ? then a number.

When I quit itunes it restarts again with the dot under the itunes logo but the iTunes window doesn't open until I click the icon on the dock. Also in the middle of the size vale in the size column the value starts with a number then a ? then a number.

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forums.
Regards.

Error while fetching the values from database

hiii all,
I have a dynpro project where i am using JDBC codes to fetch data from tables. I have used 2SQL queries...in the first query i am fetching values from 2tables and taking the result from this i run another query.As a result i expect 19591 records as the output....
1)when i put while loop for 19000, 19000records are being within 1min.....
2)when i put while loop for 20000, exception is thrown as :
ArrayIndexOutOfboundsException : size:19591,i:19591
i is variable for while loop
3)when i dont put any condition for while loop, itz taking unlimited time and output is not displayed....
please do help out...

group_rs1 = group_st1.executeQuery("SELECT A.JOINT_ID,C.LINE_ID FROM EALPS_DRWREVSPLJTS A,EALPS_DRW_REV_SPL B,EALPS_DRW_REV_LINE C WHERE"
                                                            + " B.SPOOL_ID=A.SPOOL_ID AND B.LINE_ID=C.LINE_ID");
                         //group_rs1=group_st1.executeQuery("SELECT D.TESTLEVELNO FROM EALPS_EALPS_DRWREVSPLJTS A,WELDTESTCRIT D WHERE D.WELD_TEST_CRIT_ID=A.WELDTEST_CRI_ID ");
                         //wdComponentAPI.getMessageManager().reportSuccess("connection.toString ="+conn.toString());
          int index1=0;
          while(group_rs1.next())
               arr_joint_id.add((group_rs1.getString(1)));
               arr_line_id.add(group_rs1.getString(2));
                                             index1++;
          for(int i = 0; i <arr_joint_id.size(); i++)
               String joint_id = arr_joint_id.get(i).toString();
               group_rs = group_st.executeQuery("SELECT A.SIZE_NBMM,A.ISFIELDJOINT,A.WELDTEST_CRI_ID,D.TESTLEVELNO,E.COMPLETE FROM EALPS_DRWREVSPLJTS A,EALPS_WELDTESTCRIT D,EALPS_ACTV_SEQ E WHERE"
                                                                                                    + " A.JOINT_ID='" + joint_id +"' OR D.WELD_TEST_CRIT_ID=A.WELDTEST_CRI_ID OR E.JOINT_ID=A.JOINT_ID");
          int index = 0;
                                   while(group_rs.next())
                                             //wdComponentAPI.getMessageManager().reportSuccess("inside while loop");
                                        arr_size.add(new Float(group_rs.getFloat(1)));
                                        arr_isfieldjoint.add(group_rs.getString(2));
                                        arr_weldtest_cri_id.add(new Long(group_rs.getLong(3)));
                                        arr_testlevelno.add(group_rs.getString(4));
                                        arr_complete.add(group_rs.getString(5));
                                   index++;
thanks a lot for pointing out my mistake that i was taking the last resultset and performing operations on that only....
please go thru my code,i have changed them....now i am taking all the values from each of the record-sets...............but now itz taking infinite time after which the page is exprining....can u plzz suggest.............

Set the value of an adf number slider with java script

Hi,
i develop a adf 11 webapplication with JDeveloper 11.
in one page i use the number slider component and i wish to set the value with a clientlistern in javascript.
is this possible??
thanks,
hannes

Hi,
did you try
slider = AdfPage.PAGE.findComponent("<sliderId>");
slider.setProperty("value",<your value>);
Frank

Do I need close a Cursor Variable after FETCH the value?

I have this following code and I don't have OPEN or For LOOP before fetch
All I need is to get the value from ref cursor (if it exist and it should only have one value in it) ; if there is no record, then send to error.
What I'm not sure is if I need the closing statement at the end of FETCH.
-- x_cursor is a ref cursor
oracle_form.lov(p_lov_rec => v_lov_rec, x_cursor => x_cursor);
FETCH x_cursor INTO MyValue_hold;
IF x_cursor%NOTFOUND THEN
x_return_status := 'INVALID';
ELSE
x_return_status := 'VALID';
END IF;
CLOSE x_cursor; --- Do I need this close statement ??
Thank you

It is good practice to always explicitly close cursors that have been explicitly opened.
Whilst oracle does implicitly close cursors, this is not necessarily done immediately i.e. there may be a delay in oracle sorting out the garbage. Leaving cursors open can result in the "TOO MANY OPEN CURSORS" error if you're not careful.

Fetching the value of a BOL attribute.

Hi All,
I have a requirement where I need to enable some field (say A) on the basis of the value which I enter in some other attribute(say B) of the same context node.
That means, if value of B = " some value" then A should be enabled, and by default it should be disabled only.
I suppose I have to make changes in the GET_I method of attribute 'A'.
Kindly share the BOL code to get this done, as I am very new to BOL programming.
Also please share if there are any documents or links to learn the basics of BOL programming and the basic concepts of WEB UI Development.
Thanks in advance.
Regards,
Litty.

Hi,
if the attribute 'A' & 'B' are on the same Context node use this Code in the I Getter of attribute A.
DATA lr_entity TYPE REF TO cl_crm_bol_entity.
DATA lv_value TYPE string.
rv_disabled = abap_true.
lr_entity ?= me->collection_wrapper->get_current( ).
CHECK lr_entity IS BOUND.
lv_value = lr_entity->get_property_as_string( iv_attr_name = 'B' ).
IF lv_value IS NOT INITIAL.
rv_disabled = abap_false.
ENDIF.
Edited by: F.M. on Jun 21, 2011 3:58 PM

Fetch the value from memory ID in ASR_PROCESS_EXECUTE

Hi all,
I am using the standard WD4A component HRASR00_PROCESS_EXECUTE and it's application ASR_PROCESS_EXECUTE. I have one doubt in the parameter tab of the application ASR_PROCESS_EXECUTE.
Actually there is a parameterPERNR_MEM_ID, I think this is the parameter by which we can set the value parameter(PERNR) into memory ID and retrieve the value(PERNR), when this application triggered.
But I don't know how to to this, if this is the right approach.
Can anyone please suggest me how can I retrieve the value from memory ID when ASR_PROCESS_EXECUTE application actually trigged.
Please suggest.
Thanks
Sanket sethi

Hi Manas,
Thanks for your reply. Actually I am facing one issue, If I pass the Memory ID as "ECC01" and set the process name in Process parameter, then the form will open by skipping the Select employee and select Process.
But in the case of MSS, ehen I am passing the memory ID as "MSS01" and set the process in Process parameter, then it will not open the form screen dirctly. It will then open the Initial screen Select Employee for ASR_PROCESS_EXECUTE.
It is because of the multiple PERNR are available for the Manager. Do I open the form dirctly for Manager also.
Please suggest.
I have found a blog HCM Processes & Forms: The Many Faces and Frustrations of the Start Application by Chris Solomon for this.
Please go through the link to open the form directly:
/people/christopher.solomon/blog/2010/02/01/hcm-processes-forms-the-many-faces-and-frustrations-of-the-start-application
Please suggest if you have any idea on how to achieve this.

Fetch the value from combobox

we have two jsp files:-
1. fundtrans.jsp
2. update.jsp
in file 1 we used 2 combobox and 1 textbox, we retrieved values in comboboxes from database.Now user select any value from both combobox and we want to send that value in next jsp page. After submitting values in both combobox and textbox , the database table updates.
my problem is that we are not able to use the selected value in combobox on next jsp page

Get the values and put it in the session (in your action class), then using session.getAttribute, get the values back in your another jsp.
OR
Put the selected values in the hidden field (do it in the javascript), using getter and setter method get the value back.

Fetch the value from a HashMap through EL

Hi,
I have this question,
how can we get a value from a HashMap through EL. is there any way to do that.
for example i have a hashmap in my bean and i want to place the value of of certain attributes on the page. specific to the key values in the hashmap.

Just by the key.
${bean.map.key}roughly resolves to bean.getMap().get(key).

Fetching the values

I want to get the values of many fields all are present in the bseg table except the 2 fields waers and hwae2.when I looked in the bseg table the data element BDIF2 has the ref field as hwae2 and in the same way the field DMBTR has the ref field as waers.How to code to get the 2 values?

Hi,
I think there is no other option other than specifying all the fields explicitly. But in your case specifying that many nearly 310 fields explicitly is not an easy task. So the best thing is select all the fields from database directly into internal table with same structure and don't use those two fields while using which you don't want.
Hope this will give you some idea,
Regards,
Aswini.

How to auto fetch the value of item based on remaining columns in same page

Hi,
i have 7 items in a same form
like employee name,employee number ,department,designation,email address and contact address
if i entered employee number means i need to automatically display the corresponding employee details in other columns
Please reply asap.............
Regards,
Kani

Hi Scott,
I got the solution but i assigned the default values for weight,courier charge,packing charge,other charges and net charges to ZERO...
and page items to be submited--weight,courier charge,packing charge,other charge..
If i gave --page items to be submited--weight,courier charge--net charge ll be display with out assigning default values(ZERO) for any item..fr tat wat i have to do...
Thanks,
Kani

IE01 fetching the value of referenced equipment number

Similar Messages

Maybe you are looking for