IE10 Windows 7-64-bit Preview

Preview for IE10 is out as of 11/13/12. Thus far I've encountered no issues on my W520 with any installed display driver or the password manager. The whole browser is very fast now compared to IE9
http://ie.microsoft.com/testdrive/info/downloads/default.html
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

Yes i'm having this issue to.
Becomes worse after display many documents in pane, worst even if scanned images are in.
After killing the process, sometimes it generate even more process.
After Killing all the process, sometimes need to deactivate the pane view and activate
again to restore normal preview.
Sometimes it takes a lot of time to progress to file below, if i wait, going to files above, it pass
the file that shows delay, without any problem.
I add received from Microsoft, in answer to the same issue to uninstall adobe reader and install
latest version. It become a bit more stable, but problem still shows.
Abobe reader: 10.1.0, ATI latest drivers 11-07
Please, Help!

Similar Messages

Why adobe reader didn't support window 7 64 bits preview thumbnail

why window 7 32 bits can preview thumbnail, 64 bit can't? I already asked window support, they reply is adobe reader supporting problem. Any solution for this issue??

hihihihi?????

Issue with Acrobat 10.1.2 and Windows 7 64-bit Preview Handler

Hi. I work in an enterprise environment that is currently migrating to 64-bit Windows 7. The only version of Acrobat we have approved for Windows 7 is 10.1.2. We're seeing an issue with this version that causes the preview handler to not work. The preview panel in Explorer is just white and will eventually give the error "Preview handler surrogate host has stopped working." I've tried to fix listed on http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html but that registry key is already correct. Our current work around for these users to just install Reader X1 and make it the default PDF handler, but I would like to find a better solution. Is there a known issue with Acrobat 10.1.2 and 64-bit operating systems? Or is there a way to change just the default preview handler?

Most of the info on the web page you link to is 2-4 years old. I doubt it applies. Your workaround is actually the best solution: It's always preferred to use the latest PDF viewer. Reader and Acrobat can exist on the same machine.
Also, why 10.1.2? There have been 6 releases since then with documented security enhancements (meaning there are also published vulnerabilities which are patched), bug fixesm, and feature enhancments.
I'll ping some folks about the error you are getting. . .
hth,
Ben

Flash Player not working in IE 10, Windows 7 64 bit version

My system is Windows 7 64bit version with IE 10. Adobe Flash Player will not work in IE 10. I have tried an unistall and a clean install with no success. I can hear the video but not see it. I also have Mozilla Firefox installed on my computer and Adobe Flash Player does work with it. This has been going on for about a month.

Here is solution I used for IE10, Window 7 64 bit:
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/ie10-says-adobe-flash-player-is nt-installed/d3c1eda6-cabc-4ca5-b4d9-dcba0c3aaad5
1. Internet Explorer> Tools (or Alt + t)>Internet Options>Programs>Manage add-ons (Show: All add-ons) verify that the Shockwave Flash Objects are enabled.
2. From Safety on the IE Command Bar (you may have to right-click the IE menu or IE toolbar and enable the Command Bar) uncheck ActiveX Filtering.
If that helps, it would be safer to re-enable ActiveX Filtering and make an exception for the affected sites. See this article:
How to use Tracking Protection and ActiveX Filtering:
http://windows.microsoft.com/en-US/windows7/How-to-use-Tracking-Protection-and-ActiveX-Fil tering"

Acrobat Pro X PDF previewing not working in Windows 7 64-bit

Greetings, all,
The organization I work for recently purchased a volume license for Acrobat Pro X. We uninstalled Adobe Reader from all of our machines and installed Acrobat Pro X on them. After the move, the PDF preview handler stopped working. People commonly link to the URL below, but it has not worked for us. It appears it only works for the PDF preview handler packaged with Adobe Reader, not the one packaged with Acrobat Pro.
http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html
Users are unable to preview PDFs in Windows Explorer and Microsoft Office Outlook 2007. When attempting to preview in Windows Explorer, the following appears:
This file can't be previewed.
What can we do to get the preview handler working in Windows Explorer (Windows 7 64-bit) and Office Outlook 2007?
Thanks in advance!

Bill@VT wrote:
OK. Then do you mean the thumbnails in Windows Explorer? I don't have a solution for that, but there have been several posts about the issue.
Well, thumbnails in Explorer don't work either, but we're not concerned about it. The preview pane is what we're worried about. There is a button in the top-right that turns the pane on. Previewing in Outlook does not work either.
Sabian Zildjian wrote:
Check the value for AppID in this registry key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{DC6EFB56-9CFA- 464D-8880-44885D7DC193}]
What do you have?
{534A1E02-D58F-44f0-B58B-36CBED287C7C}
DisplayName is set to "@C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\pdfprevhndlr.dll,-101".

Windows 7 64 bit + IE10 = no pdf in HTML Help

When I generate a .chm in RoboHelp and click to view the result: the .chm becomes displayed; when I click in the .chm on a link for opening a .pdf the .pdf is displayed correctly in the main .chm window.
When I doubleclick the same .chm in the Windows Explorer: the .chm becomes displayed; when I click in the .chm on a link for opening a .pdf the .pdf is NOT displayed; instead a small grey icon is displayed in the main .chm window. This occurs on any pdf-link. It is impossible to show a .pdf included in a help-.chm.
It occurs on Windows 7 64 bit + IE10.
It does not occur on Windows 7 32 bit + IE10.
It does not occur on Windows 7 64 bit + IE9 or IE8.
Is there a solution?

@Magic_Peter
Can you please advise where in the Registry you set the maxallowedzone to 1.
Was it
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\ItssRestrictions
so that your CHM could run on a network drive?
I'm thinking that Adobe Reader 11 fixed the problem and the above was just to do with the location of the CHM. Does that sound right?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Flash stopped working. Updated and enabled to no avail. Am using Windows 7 64-bit and IE10.

Flash has stopped working. Updated and enabled to no avail. Am using Windows 7 64-bit and IE10.

Pat Willener wrote:
What exactly means "stopped working"?
It had been working on my computer through the different versions of IE for years. I then noticed a few days ago that numerous reliable sites told me to install Flash. I confirmed that it was installed and enabled but all attempts to reinstall resulted in the same condition; Installed under "Programs" ans enabled under "Manage Add-ons". However I still couldn't get it running and Adobe's "Check Now" site showed it NOT installed or enabled. The only thing I can think of that might have had an effect was that I returned to IE10 recently after having some problems with IE11.

Lightroom 3 super slow on new Windows 7 64 bit...Why?

I've recently switched over to Windows 7 64 bit Home Premium, running 8GB DDR3 RAM, 1GB ATI Radeon 4800 series video card, 1920px monitor and have found the performance in Lightroom 3.4.1 much slower than I did on Windows XP, 32 bit running 2GB of RAM with a 128MB motherboard card (laptop to boot).
Why is this happening? The main issues are extremely slow imports (minimal previews set as default when importing), very delayed thumbnail (preview) rendering (the grid view sometimes sits with half the thumbnails rendered, and half not rendered, then all of a sudden, a minute or two later, all will be rendered...), and slow, in-consistent 1:1 rendering. I've tried all the different combos when it comes to preview rendering but nothing does the trick. I've even tried switching my 10GB LR3 (ACR?) cache to different drives but nothing does the trick.
Could this be an issue with the Catalyst Control Center (software controling my video driver)? It's all I've got left to consider but would very much like a resolution.
Thanks in advance.

Try the performance optimization tips here first:
http://kb2.adobe.com/cps/400/kb400808.html
Optimize your catalog(s), render 1:1 previews on import, and make sure your Cache folder isn't near the setting in LR preferences. If necessary, increase your Cache size and see if that helps.
If you regularly use Standby Mode to turn off your system, try shutting down Windows AND REMOVE AC POWER. If you have other connected devices (storage, camera, game, etc.) that use a separate power supply, disconnect them from AC power as well. Wait at least 10 seconds, then restore AC power to all devices, and reboot your system. This called a "cold boot," which will insure restoring ALL hardware devices, operating system, background applications and drivers to a known good state.
When I'm done for the day my OS is "Shut Down" and the main AC power strip turned off. It is the ultimate surge protection – NO CONNECTION. When I reboot the next morning I know all my system memory and other resources are freed up and available for my designated usage.
Following these guidelines I have absolutely no issues running LR 3.4.1 on my Windows 7 64 bit system.

Windows Vista 64 bit/firefox browser -which flash?

Hi, Can you please tell me what version of flash to install on Windows Vista 64 bit/ firefox browser?..Thanks!

Well, Firefox doesn't make a 64-bit version, so it won't use any 64-bit plugins, as far as I know.
Likewise, in IE10 (in Win7 or 8... MS blackmail encouraging you to update), unless you've checked Enable Protected Mode on the Security tab, AND have checked Enable Enhanced Protected Mode way down in the Security section on the Advanced tab (both tabs are in Internet Options), even if you explicitly run the 64-bit iexplore.exe file located in C:\Program Files\Internet Explorer\ subdir, it actually loads a 32-bit tab in the 64-bit window, and any page loaded in that 32-bit tab will use 32-bit plugins and add-ons. To force it to load 64-bit tabs in the 64-bit window (and ergo use 64-bit plugins and add-ons, such as the 64-bit ActiveX version of FlashPlayer, if available), both of those Protected Mode options must be checked.
You can confirm that by looking in Task Manager on the Processes tab... without those Protected Mode options checked, you'll see an instance of iexplore.exe (for each 64-bit window) and an instance of iexplore.exe *32 (32-bit) for each tab open; WITH those Protected Mode options checked (then fully close all instances of Internet Explorer - just reboot to make sure), all you'll see is an instance of iexplore.exe for each 64-bit window, plus an instance of iexplore.exe for each tab open... and in that case you shouldn't see *any* instances of iexplore.exe *32 on the Processes tab.

Unable to upgrade or install windows 10 enterprise technical preview from windows 8.1 pro

Compaq Presario SR2034NX
windows 8.1 pro build 9600 64 bit, x64processor
I have attempted a clean install booting from a burned dvd with the iso file on it using the windows 7 USB/DVD download tool, Ive attempted to boot from a usb using rufus. Ive even attempted to just run as administrator right from the download
the setup file.
Installing via USB windows 10 opens the language screen but everything on my screen is distorted, ive tried to change my screen resolution to fix this. it did not work. Once I managed to click my way to the next screen but windows 10 asked me
for a driver to be installed and I have no idea what driver that could be.
Installed via DVD and direct setup file windows 10 opens to the making sure your pc is updated.. then it downloads and says its installing. at the moment it finished installing and restarts the next screen is black and the windows wheel starts turning
it freezes.. about every minute to five minutes it will turn a bit more.. I left my pc in this state for a full 24hours without touching it and it never finished installing.
I have tried several different builds. I even downloaded bluestacks and ran windows 10 enterprise technical preview as a virtual and I was successful doing it this way but Ive already tested windows 10 on two other desktops and a laptop of mine and im ready
to make the switch. this is my last desktop to run windows 10 and its giving me a hard time.
can someone please help me figure this out

Hi Metro1952,
I found the following link indicates that there is no official driver designed for Windows 8 or later:
Compaq Presario Media Center SR2034NX Desktop PC
http://support.hp.com/us-en/drivers/selfservice/Compaq-Presario-SR2000-Desktop-PC-series/3239110/model/3250934
So, there might be a compatibility issue.
Again, to prepare the USB installation, you need ensure that you boot from the USB device, I suggest you make a clean USB boot drive by using diskpart:
DISKPART> list disk
DISKPART> select disk x (x is the USB drive letter)
DISKPART> clean
DISKPART> create partition primary
DISKPART> select partition 1
DISKPART> active
DISKPART> format FS=NTFS QUICK
DISKPART> assign
DISKPART> exit
Then copy the all installation files to the root of the USB drive:
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Boot Camp - Windows 7 (64-bit) - Catalyst Control Center

Hi,
This topic is all about running Catalyst Control Center on your Mac in Boot Camp.
Setup:
Mac Pro 2.66 (early 2009)
ATI Radeon HD 5870
Boot Camp 3.2
Windows 7 (64-bit) SP1
Case:
First I uninstalled all graphic drivers that came with Mac OS disc. After that I booted up in safe mode and removed all left-overs with Drive Sweeper. After verifying that everything was gone I booted up in standard mode and installed latest version of Catalyst Software Suite (v.11.2).
Notice! To get through with the installation of CSS I had to uncheck features like drag and drop decoding. If I did not uncheck those features the installation process would fail...no clue why. After a "successful" installation it still does not work. When I right-click the CCC shortcut or try to start the application from its folder nothing happens.
*Solution (if any):*
Any ideas?
<Edited by Host>

I had trouble accessing catalyst control center (for my AMD Radeon HD 6700M Series display adapter) on my Windows partition (64-bit). I tired installing the drivers from the mac os x cd and from AMD's web site. While I could successfully install the driver, I couldn't get the control center up and running. The interesting solution to this problem was downloading the AMD Catalyst™ 12.2 Preview Driver. After installation, i was able to access the catalyst control center and solve a problem that I was having (undersize on my monitor when using HDMI). I hope that this helps solve the problem to others who are experiencing it (I thought I'd post as this page came up in my solution searching).

Windows 7 64 Bit, Intel Core i7, Photoshop CS4

I just had a new computer built with Windows 7 64 Bit, Intel Core i7 and an nVidia GT240 Card....I am unable to view my "Libraries" in the Bridge...I only get "no files to view". If nothing else my Documents, Pictures and Music should be showing. I have all patches, updates installed for the computer, Photoshop, and my printer. Also when I click on Print Preview in the printer dialogue box (Epson R2400) I get an error msg stating that the "Display Driver shut down and has restarted successfully" When this occurs, my screen goes blank for a moment then starts up with an all white screen until the print preview finally appears. Any help? On the printer issue, Epson simply says to insure the drivers are up to date, which they all are. I've uninstalled and re installed everything a few times to no avail.

Thank you!!
In a message dated 3/13/2010 4:59:52 P.M. Pacific Standard Time,
[email protected] writes:
We are seeing a similar problem on our Win7 / i7 workstations. So far
there hasn't been a cure for it, but I'm convinced the current Nvidia display
drivers are bad.
For instance I also had to turn off the GPU support in Photoshop on Vista
x64 workstations just to see 16 bit color files. Since this is a new
problem, all this suggests to me that the Nvidia drivers and PS not working well
together. I've started to install other diriver versions in an attempt to
sort this out.

RV320 SSL VPN ActiveX and Virtual Passage driver on Windows 7 64-bit

Hi,
My company has just purchased a new RV320 router and only afterwards found out from the release notes that there are issues with the SSL VPN in this unit and other small business routers. Is there any news on when these issues will be fixed?
1) ActiveX controls have expired certificate dated 24/9/14 - this prevents them from running unless without changing IE security settings to prompt or allow unsigned controls, which is a big security risk.
2) ActiveX controls do not work on Windows 64-bit. Release notes state Windows 7 IE10 and Windows 8.1 IE11, however they also fail on Windows 7 IE11. Even adding router to Trusted Sites to force 32-bit mode results in error message stating that IE is required for the controls.
3) Virtual Passage driver will not install - crashes IE10/IE11 with a BEX violation. From a dig around the web it appears that the Netgear SRX5308 uses the same Cavium chipset and a Virtual Passage driver that works with Windows 7 64-bit, and installs fine using IE10/11 (and if you install the Netgear driver it works with the Cisco RV routers too, proving that the driver is fully compatible...) - if Netgear can get this working, why can't Cisco?
I've only just started setting us this router and show stopper issues like this might end up with an RMA being requested as it appears to be unsuitable for purpose, already run into other issues with I've posted about. :(
EDIT: Got (2) sort of working on IE11 - seems that the Cisco interface is specifically looking for old style IE user agent strings, so using developer tools to set the user agent to IE9, and changing security settings in Trusted Sites to prompt for unsigned controls (due to issue (1)), allows the controls to install and load. These issues are pretty simple to fix, requiring just a string check change and updated signed controls. Fingers crossed these are fixed in the new firmware due soon, awaiting response from Cisco support to my open ticket.
Looks like (3) is prevented from working by (1), and also because the certificate has expired it is treated as software without a valid publisher which cannot be installed in Windows 7 without fiddling in the registry. Releasing an updated version with a certificate that isn't expired should solve that issue too.
These are ridiculously simple fixes to push out, I can't believe a major hardware vendor like Cisco hasn't already solved these issues.

I've had a reply from Cisco support regarding this issue, and it's a bleak outlook. This is a copy from the email I received:
"Engineering has no plans to support SSL VPN on RV32x due to chipset limitations. Pretty much, it will work for old XP and Win7 32-bits."
So Cisco are falsely advertising that the RV320 has SSL VPN capabilities when there are no plans to update it so that it works with 64-bit Windows (which is now the major install base for Windows as most new systems are 64-bit based), and as the certificates have expired in the SSL VPN components they are not even useable on 32-bit systems without overriding a number of security settings.
Dan

Photoshop CC / Nikon Coolscan V ED compatibility in Windows 7 64 bit.

I managed to install a Nikon Coolscan V ED slide scanner in Windows 7 64 bit by first installing Vuescan, then Nikon Scan, but disallowing the installation of Nikon Scan drivers. Photoshop 7 sees the scanner in the file/import menu and previews, scans, and imports properly. Photoshop CC does not see the scanner. What is going on here, and is it possible to employ Photoshop CC with this scanner? (Both Photoshop 7 and Photoshop CC see another Mustek flatbed scanner attached to the system,)

Thank you for your response. Don't know exactly what the Vuescan installation did other than install a Vuescan driver for the scanner. Photoshop 7 shows the file/import entries: PDF Image..., Vuescan, SE A3 USB 1200 Pro..., SE A3 USB 1200 Pro_Network..., Nikon Scan 4.0..., Vuescan TWAIN..., WIA-ScanExpess A3 USB 600/1200 P..., and WIA Support.... Photoshop CC shows the entries: Frames to Layers..., Vuescan, and WIA Support.... I don't know how to interpret all these entries.
I take it that I could be running a 32 bit version of Photoshop CC instead of a 64 bit version, and that that might render the scanner visible. How does one download the 32 bit version? What practical disadvantages, if any, would there be in running a 32 bit version in preference to the 64 bit version?
Are you the Chris Cox who plays 'cello?

Theme Studio 5 & Windows 7 64-bit

I've been using Theme Studio v5 on my laptop, which has Windows 7 64-bit and I've been having an issue with getting themes to save correctly.
For example... the theme I am working on has to have pink meters (battery, signal etc). I have colored the icons, loaded them into Theme Builder and saved them to my PC. The next time I go to work on this theme, the preview in Theme Builder shows everything as I left it, with pink meters. But then when I test it on the simulator or my device, they're reset back to white. I load them into Theme Builder again, test and it works fine. Save the theme, close Theme Builder and the next time the theme is opened, they're back to white (on sim and on my device, but not the theme builder preview).
As far as I know or have seen, I only have this problem with the meters and with the "line color" on messages (the background for every other message). Only the meters will save, they just reset as soon as Theme Builder is closed and the "line color" won't save or display at all (does in preview, but not sim or device).
I'm also having similar issues with Composer saving correctly.
This is a major problem for me as I've already published several themes and am in the process of developing several premium themes also. So I can't have items being reset without my knowledge.
Does anyone know what is causing this problem and how I can resolve it?
Thanks in advance to anyone who replies!
~JavaBrat~

Video requirements for CS5 are:
1024x768 display (1280x800 recommended) with qualified hardware-accelerated OpenGL graphics card, 16-bit color, and 256MB of VRAM
Some GPU-accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0
The Quadro supports OpenGL 4.3 and has more than enough RAM. My guess is it would be compatible. I have a Mac Mini with Intel integrated graphics and 768Mb VRAM, and CS5 as well as CS6 (extended - BOTH) run just fine.

IE10 Windows 7-64-bit Preview

Similar Messages

Maybe you are looking for