IE10 won't work in desktop mode

So I'm using an HP laptop. OS is Windows 8. I use Internet Explorer 10, and the IE app on the Windows 8 home screen works. But when using desktop mode, IE doesn't work. When I click on the IE tab, a window comes up but it never loads. I tried a couple
of things like restarting my computer, clicking out and back into IE, disabling add-ons, using the troubleshooter to detect problems in IE performance (no issues detected), and nothing worked. So I've been using the Windows 8 app version of
IE, but I prefer to just use it through desktop mode. Does anyone have any idea of what is wrong and how to resolve the issue? 
Thanks in advance.

starting IE in the NoHome state and then getting out of it.
What did you see then?  It should have opened a  res://ieframe.dll/NavCancl.htm  page.
You could run ProcMon to see what is going on.  It would be best to have two traces of this scenario, one working and whatever it is that you are getting.  Typically your case is found to be something else that you have forgotten about that would
be interfering.  Broken Family Safety is one example but I also saw it caused by the Java updater, so it could be just about anything.  Using the suggested diagnostic should keep your traces as compact as possible.
You could also try simulating the same scenario in a safe mode boot.  Unfortunately we cannot use ProcMon in that environment but you could at least use SysInternalSuite's AutoRuns to compare what is being loaded in each case.
Good luck
Robert Aldwinckle

Similar Messages

  • WRT54G v4 won't work in PPPoE mode...

    WRT54G v4 won't work in PPPoE mode...
    For the past few years, I've had my WRT54G v4 set up to run in PPPoE mode. My Siemens Speedstream 5200 is set to run in Bridge Mode. It's worked fine for a long time. If I ever ran into a problem, I could always simply reset both, re-do all the settings, and it'd be fine.
    Today I come home from work, it's not working at all. I reset the settings, redo everything, still not working. I do this a few times. It repeatedly just won't connect to anything. The DSL modem activity lights are flashing, everything is normal, the Status page in my Linksys setup all reads fine (it's connecting through the modem like it should, acquiring an IP address, etc). So, I decide I'm gonna reset the modem and try bypassing the Linksys.
    That turns out to work just fine.
    So I reset the Linksys, hook my PC back up to the Linksys, and everything is fine. But here's the rub...
    If I try to bridge the modem and put the Linksys in PPPoE mode, it simply stops working. If I put it back into DHCP mode and reset the DSL modem, it still won't work. Once it enters PPPoE mode, the Linksys simply stops working as it should. Nothing besides a reset will make it start working.
    Any suggestions/explanations as to what would cause this? I'm completely baffled, personally. I'm running the DSL modem in it's normal state and the Linksys in DHCP but I really prefer it the other way. I just can't figure out why it isn't working.
    So, to sum up:
    1.  Connection is fine when going straight through the DSL modem.
    2.  Connection is fine when routed through the Linksys into the DSL modem with the Linksys in DHCP mode.
    3.  Once DSL modem is set to Bridge Mode and Linksys to PPPoE, I lose internet connectivity.  No DNS, nothing.
    4.  Even if I change the settings back to DHCP, it still will not work.  I must manually reset the router's settings using the reset button, doing the same with the DSL modem.
    Any suggestions?  I've tried everything I can possibly think of.

    You need to Upgrade the Router's firmware in order to get the connection work again with PPPoE...
    Download 2.95 MB...Once the Firmware has been downloaded you need to unzip the firmware file, it will unzip 3 files, you need the .bin file...
    Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
    Leave the username blank & in password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • Remote Desktop Shortcuts won't work in FULLSCREEN mode

    Hello,
    I found lots of
    shortcuts won’t work during remote desktop connection between Win7 64 host (home premium) to Win 7 64 guest (professional):
    Include:
    ALP+PAGE UP/PAGE DOWN
    CTRL + ALT + ±
    In order to make them work I need to exit full screen mode of remote desktop first (can be done with CTRL+ALT+BREAK)
    Is there any fix?
    Bob

    Hi，
    Have you check the "Local Resources" under Remote Desktop Connection "properties",? just as screen shot below:
    You can also test this issue with On-screen keyboard, check if issue persists.
    Yolanda Zhu
    TechNet Community Support

  • Why does Digital Edition not work in desktop mode for WIndows 8?

    I have installed the most recent version of JAVA and then downloaded and installed Digital Editions.  I can open Digital Editions in desktop mode but when I select a book I cannot turn the page or move to a new page by any means.  The only thing that seems to work is to select a new page and then toggle between full screen and partial.

    I don't think ADE uses Java at all.
    I run it in desktop mode in WIndows 8 and it reads books and turns pages fine: either using the left-right arrow keys,
    or clicking on the forward/back buttons each side of the scrollbar at the bottom of the page.
    There are lots of bugs in ADE2.0, and even though that isn't a bug for me it may be for you.
    Try replacing ADE2.0 with the older but more reliable v1.7.2.
    (You can have them both installed at once if you like.)
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172

  • Internet explorer not working on desktop mode in windows 8 operting system

    i use hp pavillion laptop it has windows  8 as operating system...usually i use desktop mode of internet explorer but suddenly it stopped working since past few days..the metro tile of internet explorer works well...i really need help..please help urgently..nothing connects to the internet from the desktop:- internet explorer,fire fox mozilla,bluestacks,updating of norton security...urgently need help all that the internet explorer says is "page cannot be displayed" pleasseeeee helpppp

    Go to the Start Screen, type in "Internet Options" go to the programs tab, and click the checkbox with "Open Internet Explorer tiles on the desktop."
    Also, going to Internet Options from the Control Panel works if you can't search
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Tour 9630 won't work with Desktop Manager/Media Manager

    Just got this BB from Verizon, everything works fine but when I plug it into my PC the Desktop Manager software is a mess.  I'm running Win XP.  I've double checked all the USB connections, uninstalled and reinstalled the the BB software and taken the BB battery out and put it back, so it's none of those things.  I brought the BB back to Verizon they said "it's working fine, must be a driver or something, duh".
    When I plug in the BB and bring up Desktop Manager sometimes the BB is recognized sometimes not.  When I try to use the Roxio Media Manager it comes halfway up but the hourglass cursor never goes away and it just sits there thinking for hours.  Sometimes I get a pop up saying " First Time Configuration...., it won't let hit any of the choices, I just have the hourglass thinking.  I always have to hit Ctl, Alt, Del and call up my task manager to quite the program because the hourglass never turns back into the cursor.   I just want to manage my media.  This is very frustrating.

    HI - I have the exact same problem as this post. Yes- i've uninstalled and reinstalled the desktop manager software- I plug in my BB tour 9630 and I get would you like MSP- I click yes and get nothing in the managerManger. No options. If I click NO the only thing I can do is back updata- No media downloads.
    It was working fine until last Sunda and I've changed nothing on my laptop. The USG port works perfect and the cable is new.
    Help

  • External Display won't work in clamshell mode

    Hi - I can't get my external display to work with the MacBook in clamshell mode - It works fine with the lid open.
    I'm using it with the apple bluetooth keyboard and mouse.
    I've obviously changed a setting without realising - can anyone help.
    Thank You.
    Ash
    MacBook Pro (15-inch, Mid 2010)
    Mac OS X 10.6.8

    Sorry - I've now got it to work.
    I don't know how - I just went through all the settings one by one, switched them off and back on again and it now works - I have to assume it is 'user error' but I can't work out which bit

  • Siri won't work in data mode

    siri does not respond in data mode.  I have tried resetting, restarting, turning siri on/off, data mode on/off.  Siri is not available in data mode.  My carrier is AT&T.

    What do you mean "data mode?" Do you mean you are on AT&T's network as opposed to Wi-Fi? Does it work on Wi-Fi?

  • Bridge won't work with desktop thumbnails

    I have a mac and when I try to use bridge with my desktop it has been disappearing.

    Ok. here is a full troubleshooting helpdoc. Troubleshoot errors, freezes | Adobe Bridge | Windows, Mac OS
    Repair Permissions with Disk Utility as well.
    If nothing works a clean uninstall/reinstall is all that is left.
    I also wonder if you see this behavior in other user accounts on your Mac.
    Gene

  • A700: PS3 Won't Work in HDMI Mode

    When I connect my PS3 to my A700 using an HDMI cable, there is no picture or sound. I know the PS3 works, because it works fine when I hook it up to the A700 using AV cables, and I know the HDMI cable works, because I can use it to connect my laptop to the A700. I have changed the settings on my PS3 to HDMI, so I know that's not the problem. Any suggestions would be greatly appreciated.

    Hey,
    I have had the same issue for the past few days, I think the problem lies with the hdmi input on the a700. I've used several different cables and I've finally managed to get a connection to my ps3 by simply moving the cable around slightly at the back of the a700, taking it out and firmly holding it in until an image appears.
    The port seems to be very temperamental, if I move it in any way when using the ps3 then the screen goes black and everything's lost again. This may only be my a700 but my problem was exactly the same as yours, it may be an issue with all a700s.
    Hope this helps!

  • Wi-fi won't work in Flight mode

    Hi everyone - was wondering if anyone here could help me. I'm planning on taking my iphone overseas without roaming and just using wifi for skype and messaging (ping, whatsapp etc.). However, when I put my phone in flight mode, even though it's connected to wifi, as evidenced by the symbol at the top of the screen, it fails to connect to any web page or receive my email and 'whatsapp' even goes on to say that I don;t have a valid internet connection.
    I'm not sure what it could be...help would be much appreciated!

    I'm planning on taking my iphone overseas without roaming and just using wifi for skype and messaging
    Just put in a SIM card you can buy in the destination country and put it in iPhone. Calls are then cheap.

  • Quicktime won't work in 64Bit mode

    Hi,
    i have following problem: The Quicktime-plugin does not show any Quicktime movies when i start Safari in 64Bit. It only does when i switch to 32Bit.
    I'm using Safari 5 - SnowLeopard 10.6.3 - latest Quicktimeplayer - Intel Core 2 Duo/MacBook
    Any ideas? Quicktime is running well in gChrome...
    Thanks for reading.

    Sry. It's about the QT-Plugin...

  • Windows 8 Desktop Mode Apps have no access to internet

    I've seen a couple people ask questions about their browsers not working in desktop mode for Windows 8, and none of them were answered.   I've got the same problem with mine, however it's any application that runs in desktop mode.  
    Problem:  NO application running desktop mode has internet, games, browsers, chat programs...nothing. 
    History:
    -Was running Windows 7 Ultimate and upgraded to Windows 8, choosing to migrate over all my applications files and personal settings.
    -Metro style apps and browsers have no problems accessing the internet
    Attempts:
    -attempted to reset IE 10 Desktop mode to all default settings, clearing browser cache, SSL slate, and resetting to default. 
    -attempted to reinstall chrome.
    -running CMD prompt in desktop mode, able to ping and use DNS as normal
    -Windows 8 defender is disabled, running MS Forefront for AV.
    -forcibly set my adapter DNS to a google dns 8.8.8.8
    Any idea's what to try next?

    hi there rebirth16 i had the exact same problem upgraded from windows 7 64bit to windows 8 pro and my desktop apps would not connect to the internet but the apps on metro did :-s. (strange) i upgraded with all my software and personal files intact im not
    sure but some setting or some program caused the internet on the desktop to not connect. after a day of going through the pc my solution was to reinstal windows 8 but selected for it to just keep personal files i.e music pictures videos but not software after
    that the finished the internet worked perfect well happy now down side you need to reintal your programs but this is the only way i could fix it.

  • Video won't play in preview mode. Any ideas?

    Hello everyone.
    Wondering if anyone can help me with a little issue I'm having with Final Cut Pro.
    For some reason, video playback won't work in preview mode (apple+F12). It just pauses, but the audio plays. I've checked that the Video Playback is set to Digital Cinema and that I select All Frames in External playback, but it still remains looking like a still frame - with the audio. However, the footage plays fine in the canvas window.
    Any clues on what the issue could be?
    Just so you know, I'm using a Lumix GH3 camera, with no firewire. I have to import the .mst files into iMovie, with USB, and export them into .movs to get them to work in Final Cut. If anyone knows of a much simpler way to do this then that would be a great help.
    Could that affect the playback?
    Thanks in advance.

    there's probably your problem.  Although fcp will allow you to import h264 quicktimes, it's not a compatible format.  Use compressor to convert to prores422.  Post back if you need any further help with this.

  • Quicktime does not work in firefox 24 in windows 8 desktop mode

    I am running Firefox 24 on Windows 8 Pro 64-bit in desktop mode. I have QuickTime Plug-in 7.7.4 installed. But when I try to go http://trailers.apple.com/trailers/ and play trailers all I get is black box and nothing is playing. No prompting to authorize a plugin, no error message, nothing. I tried to see if it will work with other browsers, so I tried Google Chrome. I went to the website, got prompted to authorize the plugin and then was able to play trailers without any problems. The page won't even render correctly under IE. So, it makes me conclude that it is a browser problem. Can you help me please? Thanks.

    Is his in a normal tab or in a private tab?
    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for