IE11 doesn't accept format of domainname\username when authentication through ADFS

I am using IE11 , when I log on to Office365 through ADFS , the login page only accepts userprincipalname format . It doesn't accept domain\username format , if use domain\username , password will prompt again and again .
However , the issue is not happening on Firefox or Chrome on same computer , and also , the issue is not happening on a different computer which has same IE version .
could anyone please help me on this ? Thanks in advance

Hi,
Since this just happens on a single computer, I suggest to reset the Internet Explorer,by resetting Internet Explorer settings, you return it to the state it was in when it was first installed on your computer. This is useful for troubleshooting problems
that might be caused by settings that were changed after installation,
reset Internet Explorer in this way:
a. Close all Internet Explorer and Explorer windows that are currently open.
b. Start Internet Explorer.
c. On the Tools menu, tap or click Internet options. If you don't see the Tools menu, press Alt.
d. In the Internet Options window, tap or click the Advanced tab.
e. Tap or click Reset
Details can be found at:
http://support.microsoft.com/kb/923737
Regards
Wade Liu
TechNet Community Support

Similar Messages

  • Bluetooth on my iPad doesn't accept or send anything, even when paired and turned on on both items. My iPad is only a few weeks old. What's wrong?

    I've paired by iPad with my Nokia phone. Bluetooth is turned on on both items, but when I try to send a photo from my phone to my iPad, I get a message on my phone saying "it's not supported by the other device". Is there a fault on my iPad? Or have I not set something up properly? I'm at my wit's end, as I'd like to upload photos while I'm on holiday.

    Sorted! Apparently iPad is just not geared up for Bluetooth except for keyboard and headsets!

  • My monitor doesn't show the correct resolution (1920x1080) when connected through HDMI

    It only appears 1080p/i, that make the image blury. However, it does work on 1920x1080 when using VGA->minidisplayport. I've tried SwitchResX but I couldn't force the right resolution.
    I need my minidisplayport free to connect a 2nd monitor, that got no HDMI connection

    Hi, is there any setting on the Monitor for input source, like HDMI, PC, DVR, etc?

  • HT3702 Hi there, can somebody help me in showing me how to reset my credit card information on iTunes Store as I have the credit card and it seems like the system doesn't accept my new card.

    Good day, can someone show how to update a new credit card on iTunes Store as I have changed my credit card. It seems like the system doesn't accept the new infos but when investigated with apple store staff members, they said I had a previous purchase to complete for the payment in order to update my new infos. Does Apple have authorization credit card form? So that I can authorize them to finalize the previous purchase payment with a new card.

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html
    You may want to try gift cards as an alternative.

  • I use photo stills in my iMovie. I want them to last longer than a minute, but when I input 01: 45: 00, to signify one min. and 45 seconds, it doesn't accept it. What is the proper format for inputting minutes?

    I use photo stills in my iMovie. I want them to last longer than a minute, but when I input 1:45:00, to signify one minute and 45 seconds, it doesn't accept it. What's the proper way to input it?

    There are 30 frames in one second of video. So you can specify down to the frame level, which is 1/30th of a second.
    Is the Duration box switching to some other time every time you type in 1:45:00?
    For instance this is a 5 second clip plus 3 frames. To get this set properly I would type in 1:45:00, then click done. I don't know if it is different under older versions of iMovie, as I'm using iMovie '11 for thisi example.

  • HT3376 My Bt Yahoo email account doesn't accept my password when my Mac gives it but if I access my BT yahoo via Safari it accepts the password

    my BT yahoo email account doesn't accept my password when my Mac tries to access it using mac mail but when I access My BT Yahoo via Safari it accepts the password.

    When it doesn't accept the password from Mail , it can be things other than the password actually.
    It could be their Server, which is contacted differently than through WebMail, it just means the Server listening on this port, (or not listening), is not finding your username & password.
    http://usertools.plus.net/exchanges/mso.php
    http://downrightnow.com/yahoomail

  • FaceTime doesn't Accept my Apple id Password

    FaceTime doesn't Accept my Apple id Password, although i have written it twice! I have Seen it in the webpage of the i- store that i can so do the Shopping there. So, what have i do wrong? Please help me! Thanks!

    I had a similar issue but mine said cannot verify username and password.
    To resolve this i went to generals: App store and clicked on my apple id. when a pop up shows click on view Applie id account. There select the payment process and select NONE in the type of card instead of your visa or mastercard. save it and then you can try getting into facetime., It should be good. It worked for me. Good luck. Lemme know how it goes

  • Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

    Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

    Hello djensen1x,
    Could you please let me know what version of Acrobat are you using.
    Also, tell me your workflow of combining those PDF files?
    Please share the screenshot of the error message that you get.
    Hope to get your response.
    Regards,
    Anubha

  • Copying from Oracle SQL Developer to Microsoft Word doesn't retain formatting (Font,colors etc)

    Copying from Oracle SQL Developer Worksheet doesn't retain formatting (font,color etc...)in Microsoft Word but copying from other programs such as
    visual studio, chrome browser etc works fine. This doesn't work even after changed the setting to Keep Source formatting of Options-> Copy and Paste Settings

    Hi,
    I notice that you have cross posted in Answers forum and Oracle forum. Have you tried Mr. Peter's suggestion?
    Then, I recommend we check the Word settings:
    1. Go to: Options > Advanced > Cut, Copy and Paste
    2.  Make sure that Use smart cut and paste is ticked. 
    3. Click the Settings button next to this option
    4. Make sure that Smart Style
    Behavior is checked.
    If the issue still exists, please upload a sample through One Drive, I want to test.
    Regards,
    George Zhao
    TechNet Community Support

  • Downloading apps it asks for apple ID Pass then it says "verification required". Then says Security Code required. Doesn't accept code. itunes doesn't accept code from visa card either?Please Help

    Downloading apps it asks for apple ID Pass then it says "verification required". Then says Security Code required. Doesn't accept code. itunes doesn't accept code from visa card either?Please Help

    If it is trying to verify your payment info, I would be willing to guess that it is looking for the security code for your credit card. Did you credit card just get replaced lately or the expiration date change? When is the last time that you updated your payment information in iTunes?

  • I enable voice over settings on my Ipod Touch 5th gen. I can't disable it anymore. I off my ipod and now i can't open it. It doesn't accept my password. I can't open it anymore.

    Please help me. I can't open my Ipod touch. I enable voice over settings on my Ipod Touch 5th gen. I can't disable it anymore. I off my ipod and now i can't open it. It doesn't accept my password. I can't open it anymore. Thanks!

    Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see:
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)

  • The Quicktime manual indicated that .pdf is an acceptable format yet I can't open a pdf file with Quicktime?

    The Quicktime manual indicates that .pdf is an acceptable format, however I can't open a pdf file in Quicktime.  Any suggestions?

    QuickTime7_User_Guide.pdf is the on-line document that makes the reference.  Under Welcome to Quicktime, Types of Files, note the following:
    Types of Files QuickTime Supports
    You can open (import) dozens of types of media with QuickTime. Some of the formats
    you can open in QuickTime include the following:
    Â Video formats: MOV, MPEG-1, MPEG-2,1 MPEG-4, 3GPP, 3GPP2, JPEG, DV,
    Motion JPEG, AVI, MQV, H.264
    Â Audio formats: AIFF/AIFC, Audio CD, CAF, MOV, MP3, MPEG-4, AU, WAV, iTunes audio
    Â Still-image formats: BMP, GIF, JPEG/JFIF, JPEG 2000, PDF, MacPaint, PICT, PNG,
    Photoshop (including layers), SGI, Targa, FlashPix (including layers), TIFF (including
    layers)
    Â Animation formats: Animated GIF, FLC, Flash, PICS
    Â Other formats: KAR (Karaoke), MIDI, QuickDraw GX, QuickTime Image File,
    QuickTime VR, Text

  • How to install adobe reader if it doesn't accept my password?

    how to install adobe reader if it doesn't accept my password?

    To install Adobe Reader (and most other programs) you need your computer's Administrator password.

  • Hello. I would like to activate my CS3 Educational Program (version 2007) on my new computer. Unfortunatly he is not accepting my serial number. What can I do? I have delated the program on my old computer but it doesn't accept the activation on the new l

    Hello. I would like to activate my CS3 Educational Program (version 2007) on my new computer. Unfortunatly he is not accepting my serial number. What can I do? I have delated the program on my old computer but it doesn't accept the activation on the new laptop.

    Make sure you are using the  correct serial number.  Find your serial number quickly
    If you did not deactivate the original installation then it is possible your two allowed activations have been used and you need to reset your activation count.  To do that you need to contact Adobe Support thru chat and ask them to reset your activations.  If you ask for more than that they will tell you they cannot offer you any support.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • IPHONE 4 DOESN'T ACCEPT WIFI PASSWORDS ANYMORE - PLEASE HELP!

    Hi all,
    My iPhone 4 out of blue decided not to accept the wifi password- it says "wrong password for xxx network" - it's my home one it always worked-
    I was away and worked fine for a week in others houses (where the password was stored already) went to other house, tried to connect with passwprd and started saying the pw was wrong - got home last night and didn't connect right away as usual(maybe because I've reset the network when away) so I've put the pw in and again says it's wrong - Of course the password is correct - laptop works fine and iPod touch as well - At work there is a non protected wifi and it connects fine - So looks like the iPhone doesn't accept passwprds for the wifi
    I've tryed to reset the network few times, reboot it few times, reset all settings and update the sofware (version 5.0.1) - nothing worked - aw also unpluged and re-pluged the router at home (knowiing wouldn't' help)
    PLEASE help, very frustrating - I've seen few people had the same issue but nothing worked.
    Thanks

    You're welcome.
    Incorrect. The passcode lock is not included with the backup. The restrictions passcode is, but not the passcode lock. If it were included with the backup, you would need to restore as a new device or not from the backup. Either way, you must restore with iTunes which is the only way around a forgotten passcode.

Maybe you are looking for

  • Need to Repeat Workflow on an Hourly Basis

    I just want my workflow to repeat on an hourly basis. (Have tried using Save as Plug-in for iCal, but iCal will only do daily/weekly/etc.)

  • Make movement type 201 as follow on for 311

    Would like to know if it is possible to make movement type 201 as a follow on for 311. The requirement is to first transfer an item from one storgae location to another location and then issue it in the receiving location. Thanks and regards, Jon

  • How to create IDOC

    <b> HI ,    USING ALE I WANT TO TRANSFER MATERIAL DATA , FOR THIS I HAV CREATED THE RFC PATH FOR RECEIVER AND SENDER . USING MATMAS I transfered it  , But I want to create an idoc for this , Is there any way to create an idoc for any data transfer .

  • How to invoke dos shell from java program

    Hi, I'm not able to invoke dos shell from java. Can any one help me in this issue. I'm providing the source code below: try{ Runtime.getRuntime().exec("cmd.exe") catch(IOException e) { System.out.println(e.getStackTrace()); Thanks

  • How do I clean my "Recently added" playlist?

    I have over 1800 songs in there. that doesn't do me any good. Can the "recently added" folder be emptied..or do I just have to remove the folder< which i don't really want to do?