IE11 not working after latest Windows Updates when viewing Project Online sites

Ever since the latest Windows Updates rolled out a few weeks ago we cannot get Internet Explorer 11 to work with our
Project Online sites at 365.  We tried putting it into compatibility mode but then it runs painfully slow.  Is Microsoft aware of this problem?  Our workaround is to use Chrome --- which is really ironic, right?  To access 365 Project Online
sites we can't use Microsoft's own browser!  We have to use Google's --- you have to laugh or else you'd cry.

We tried putting it into compatibility mode but then it runs painfully slow.
Sounds like the site is doing browser User-Agent sniffing.  Compatibility mode forces IE7 Quirks mode emulation.  So, you may need a more modern emulation (e.g. via the Developer Tools, Emulation tab, F12, Ctrl-8).  But the real fix would
be to get the site to stop doing User-Agent sniffing and support all modern browsers.
A usability problem with a Developer Tools override is that it has to be done each time and the DT window has to be left open for the duration of the session.  You can report compatibility issues here:
https://www.modern.ie/en-us/compat-issue-report
Then one way or another you may eventually get better usability on that site with IE11.
FYI
Robert Aldwinckle

Similar Messages

  • Wifi not working after latest iOS update

    wif not working after latest iOS update 7.0.4.  Any suggestions?

    Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

  • Mouse not working after latest Microsoft updates for Vista

    After installing the latest series of Windows updates for Microsoft Vista on my Boot Camp installation, the mouse quit working. I am using a mighty mouse, but any mouse plugged in resulted in an error message that it could not install the correct drivers. Re-installing the boot camp drivers did not work, but using system restore to roll back the updates did work. I was wondering if anyone knew which Microsoft update caused this to occur? If you need any further information, let me know.

    To be honest, I'm not sure. I was trying to get Reset Points working (oh the timing) and it required me to install updates to reboot, so I simply did that. From what I was able to gather from people running WIN8 on non-apple machines it is often related to changes in intel xhci. Not sure how that relates to a Mac though.

  • Silverlight (Netflix) not working after latest Firefox update

    After the latest Firefox update (34.0.5), I can't get Silverlight to work on Netflix. I get a black screen with no error codes.
    Netflix has a checklist of things to do if you get a black screen (https://help.netflix.com/en/node/95), and I've done all of these things several times -- manually removing Netflix cookies, uninstalling and reinstalling Silverlight (and I used a Fix-It app on the Microsoft website to troubleshoot), disabling ad blockers and virus software, and scanning for malware. I've done all of these things, and nothing has helped. I can play Netflix videos in Chrome, but I think there's no reason why I shouldn't be able to use my preferred browser, especially since I was able to do it without incident up until Wednesday night.
    I had two chats with Netflix tech support. Neither were much help, but the second person suggested that I uninstall Firefox entirely and then reinstall. I don't really want to do that. I'm not really that tech-y, and I'm afraid of losing my settings. Honestly, I would cancel Netflix before doing that.
    Has anybody else had this problem? Are there any OTHER workarounds or suggestions of what I can try to fix this problem? Also, is it possible to be prompted when there's a new Firefox update.. and not have it automatically updated without my permission? I can't, by any chance, roll back to the version when everything worked fine?

    ''tenderprey [[#answer-668426|said]]''
    <blockquote>
    So, it sounds like there's a compatibility problem. I didn't realize that Firefox accesses Silverlight in a whole different way. Do you think Firefox needs to be updated/patched to be able to work with the Silverlight plugin again, or does the plugin need to be updated to be compatible with the latest version of Firefox?
    </blockquote>
    First of all, I´m not a IT guy...just a fan of "firefox".
    Regarding your question, since this issue started with the 34.0.5
    version of "firefox" it´s my opinion that it´s "firefox" the one that
    should be updated/patched to work again with "netflix".
    to fix such issue.

  • XFCE Keyboard Layout applet not working after latest xorg update..

    Is this a bug in the xorg update or most the kbd layou be reompiled or? I am not able to swtich between my two kbd layouts anymore.. Downgrading the org packages made it work again but I guess that's not a long term solution...
    Regards,
    BTJ

    Hi mattywix - can you add any more detail please ?
    I have a recent experience that sounds related to your problem - I have a 15" macbook pro bought new in the UK a couple of years ago (macbookpro 5,3), which has been running perfectly under snow leopard until a couple of days ago when my trackpad stopped recognising the standard "left" click.
    "Right" click, scroll and pointer movement continued to work fine.
    Booting in safe mode seemed to give me back the left click but this was immediately lost when I returned to standard boot up.
    Doing a full reinstall from original disks, all seemed fine. Over 1.6Gb of software updates and everything worked great. Then the final run of S/W update took me from os-x 10.6.6 to 10.6.7 plus a few other changes and again the trackpad stopped recognising "left" click.
    Plugging in an external drive which had a copy of my system as at OS-X 10.6.3 and booting off that - everything works fine again.
    I can only conclude that there's an issue with the 10.6.7 upgrade and my 2 year old MBP hardware so will have to reinstall yet again but stop at 10.6.6
    My concern is that after the first upgrade to 10.6.7 I put the laptop on charge to top it up from about 70% and came back to find the machine abnormally hot. With your comment about toasting the logic board, I wonder if there's a bug in the power control software too which I was lucky enough to catch before my machine suffered the same damage as yours ?
    Sorry to hear about your bad luck but thanks for warning us about it.
    Alick

  • Internal speakers on my iPhone are not working after latest software update.

    I'm not able to listen to my calls (unless I use speaker phone) after updating to the latest iOS 8.3 software. Any input? - Thank you!

    Is the mute switch on?
    Basics from the manual are restart, reset, restore from backup, restore as new device.  Have these been tried?

  • Personas not working after latest FF update and "solution" is not working

    I am still unable to get my favorite personas to rotate. I'm upset that personas used to work quite nicely even though I had it set to clear history every time firefox was closed. I want personas to rotate AND have history cleared again. In the meantime, I've disabled clearing history--now how do I get the rotator working again please.

    Personas should work if you aren't in Private Browsing mode.
    Make sure that you do not run Firefox in (permanent) Private Browsing mode.
    *https://support.mozilla.org/kb/Private+Browsing
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history"
    *Deselect: [ ] "Always use private browsing mode"
    When you are in Private Browsing mode then the persona is disabled (bug 852295) and you get the default theme and a purple PB icon in the Firefox menu button or the right end side of the menu bar (tab bar on Linux) and "(Private Browsing)" appended to the title bar.

  • Iphone 4 not recognized and will not sync after latest itunes update.  I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

    iphone 4 not recognized and will not sync after latest itunes update.  I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • HT201366 CAC readers not working after installing security update 2013-003?

    Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

    For CAC issues, see:
    MilitaryCAC's Mac OS X support landing page
    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Garmin GLO portable GPS quit working after latest Apple update

    Garmin GLO quit working after latest Apple update ?

    I am using Mountain Lion. I reset the system a thousand times. The Mac communicates fine with the printer, that's not the problem.  Somehow, recently something changed in the ppd file for the LaserJet 1320 that it simply does not print properly. For instance, I sent a job to print two pages, and use the duplex. The duplex works, but then the other side comes out empty.  Is there a place I can find the old - less secure, I don't care, I just want to print - ppd file for controlling the printer? I think the printer only supports certain level of Postscript commands, and the new ppd file expects a new level. This printer is 8 years old after all. If I plug the printer in Linux, it prints the same document fine.
    Thanks for any help

  • My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
    Have you tried deletting the plists for MAS?
    This page might help you out...
    http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
    Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
    Let me know how you get on?
    Thanks.

  • My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    - Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download/install a new app
    - Restore from backup
    - Restore to factory daults/new iPod.

  • Can I not download iTunes if I do not have the latest Windows Update

    Can I not download iTunes if I do not have the latest Windows Update?

    Hi CRyan18,
    Requirements for installing iTunes for Windows can be found here -
    Apple - iTunes - Download iTunes Now
    http://www.apple.com/itunes/download/
    The latest version of Windows is not required. If you have issues with downloading or installing, see this article -
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My sound is not working after downloading windows 10

    My sound is not working after downloading windows 10 please can you help me?

    right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

Maybe you are looking for