IE11 on WIn 8.1 Update 1 crashes. AppHangTransient

Hello,
We have a IE11 which freezes at start and then crashes on a Windows 8.1 update 1.
I have tried to uninstall it but i've got a error message.
This is the message i've got in the Event Viewer :
Fault bucket , type 0
Event Name: AppHangTransient
Response: Not available
Cab Id: 0
Problem signature:
P1: iexplore.exe
P2: 11.0.9600.17344
P3: 541b707b
P4: unknown
P5: unknown
P6: unknown
P7: unknown
P8:
P9:
P10:
Attached files:
These files may be available here:
C:\Users\cnicaise\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppHang_iexplore.exe_a30c9936e3b3ebf385f23324f89641404812d4_647f45d0_0e47af44
Analysis symbol:
Rechecking for solution: 0
Report Id: b296eb47-d2d5-11e4-8318-c4d9877de500
Report Status: 2049
Hashed bucket:
Since IE 11 is integrated in Windows 8.1, i cannot downgrade it and I cannot found IE12 offline installer.
Any help is highly appreciated.

Hi Gbonaert,
This kind of issue might be caused by incompatible add-ons or corruption during update.
Reset Internet Explorer then check the issue again.
http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings#ie=ie-11
If the issue still persists
Try disable/removing add-ons in your Internet Explorer, or you also could start Internet Explorer under no add-on mode.
http://windows.microsoft.com/en-us/internet-explorer/manage-add-ons#ie=ie-11
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

FCP 10.0.1 update now crashes every time I launch it!

FCP update now crashes every time I launch it! Won't even open a project I started last week with version 10.0.0.
I have a deadline at work so I've now got a big problem! I'm trying to give the new and supposedly improved FCPX a shot but this app is turning out to be a real hack. What other professional video editing software do you guys use? Anyone use Premier Pro? I have Premier pro and think I should probably start my new projects in it. As I said....this app is a real mess.
FYI: Same problem for my 1 year old MacBook Pro (8G ram, i7 processor) AND my Mac Pro (16G ram, 2 x 3GHz quad core processors, 4-1TB hardrives.

I don't know who these friends are, but they're certainly misinformed and they don't appear to be doing you any favours.
There are a great number of professional editors who have used Final Cut Pro since version 4 - but took the trouble to
a. Find out the system and install requirements for FCP X
b. Watch professional tutorials such as Ripple Training and actually LEARN how to use this ground breaking new application.
They (and I) are having very few issues with FCP X - especially since the update.
If you're getting crashes, autosave problems etc, there is more than likely some conflict on your system drive.
Create a new (admin) user on your Mac system and try FCP X from there.
I did this, and FCP X worked perfectly on the new account, meaning there was definitely a conflict on my existing system.
To be absolutely certain my MacPro's system was squeaky clean, I then did a clean reinstall (not TimeMachine) and FCP X has worked reliably ever since.
FCP X application should be in your Applications folder and ideally, your project and events should all be on an external HD and not on your Mac system drive.
I have around 4000 clips distributed between six events at the moment and FCP X is coping very well most of the time.
It helps to work without the waveforms displayed as these slow things down considerably.
Do you have FC Studio or a version of FCP on the same drive partition as FCP X?
This is what Apple say on their current web page on installation practice:
"It is strongly recommended that you install Final Cut Pro X, Motion 5, and Compressor 4 on a startup disk that does not have Final Cut Studio (2009) already installed. Use Apple's preferred installation procedure when upgrading one version of Final Cut Pro or Final Cut Studio to the next. This procedure is not unique to Final Cut Pro X."
They do go on to say "if you must" have the two on the same partition, FCS must be located in a different folder - but I would have thought the words "strongly recommended" and "if you must" speak for themselves.
Andy

I have updated my iPhone 4s to iOS7 but when i connect it to itunes on my PC it give me a msg to restore your iPhone in summary tab, Please help m using win 7 and updated itunes.

I have updated my iPhone 4s to iOS7 but when i connect it to itunes on my PC it give me a msg to restore your iPhone in summary tab, Please help m using win 7 and updated itunes.

What is showing on the screen of the iPhone?
Does iTunes say the iPhone is in recovery mode?

Apps crashing, can't send problem to apple, software update app crashes....

I came back after a two month summer vacation (I unplugged the computer while I was away) and I went to update the software and then the software update app crashed. I tried to report the problem to apple, but it says that the submission failed, "your report could not be sent to apple, please try again later"
I then tried to sync my iPhone, and iTunes crashed, so I tried to report the problem, and I got the same error. So I un-installed iTunes, but when I emptied the trash it said that "iTunesHelper" was in-use, so I couldn't. But then I tried to restore iTunes by taking it out of the trash, and when I tried to open it, it said that it wasn't supported on that architecture.
I restarted the computer, but the problems won't go away. Firefox works fine...'
UPDATE: Safari crashes too...
System preferences works...
Garage Band: Crash!
iPhoto: Crash!
MS Word: Works...
World of Warcraft: Crash!
I am guessing that my problem has something to do with insufficient memory or something like that? I'm not sure...
About my computer: iMac7,1, running Mac OS X 10.5.7
@GHz Intel Core 2 Duo
3GB 667 MHz DDR2 SDRAM
Any help is appreciated, I guess my best bet is to go to the Apple store or tek-serve.

Those weeks of sitting idle did not help the Mac as a vacation should!
Try repairing the disk permissions. At best do an Archive and Install. This will install a new Mac OS X, archive the old system, which you will later drag & drop to the Trash and flush away, and preserve your data and user accounts and settings. You can do this with your Restore DVD. Read all onscreen instructions and check the correct boxes to preserve your data and settings.
At worst, backup all your data and Erase and Install. Write zeros to the HDD and any bad sectors that exist will be locked out on the drive and no longer used. This is also done from the Restore DVD. After installing Mac OS X import your backed up data and begin anew.
Dah•veed

MS homeserver 2011 connector error in Win 8.1 Update 1

Had dificulty in installing win 8.1 Update 1, which required the OS rebuild. The Win Homerserver 2011 connect program fails to install. Error message includes “…either another software installation is in progress, or, the computer has a restart pending.” I have been checking all possible Microsoft solutions without finding any that worked.
I have just searched the registry for RebootRequired and found the following location: \HKEY_LOCAL_MACHINE\SOFTWARE\Lenovo\Lenovo Settings Installer Manager, which has a RebootRequired listed. The system has been rebooted a large number of times.
RebootRequired        REG_DWORD        0x00000000 (0)
There is a sub-key \Common that has the following
SystemRebooted        REG_DWORD        0x00000000 (1)
This T440s is the only Lenovo system (out of 4) that has these keys. Is this the source of my problem and can I safely remove them from the registry? Thanks

Had dificulty in installing win 8.1 Update 1, which required the OS rebuild. The Win Homerserver 2011 connect program fails to install. Error message includes “…either another software installation is in progress, or, the computer has a restart pending.” I have been checking all possible Microsoft solutions without finding any that worked.
I have just searched the registry for RebootRequired and found the following location: \HKEY_LOCAL_MACHINE\SOFTWARE\Lenovo\Lenovo Settings Installer Manager, which has a RebootRequired listed. The system has been rebooted a large number of times.
RebootRequired        REG_DWORD        0x00000000 (0)
There is a sub-key \Common that has the following
SystemRebooted        REG_DWORD        0x00000000 (1)
This T440s is the only Lenovo system (out of 4) that has these keys. Is this the source of my problem and can I safely remove them from the registry? Thanks

Since Win 8.1 update Satellite C855-2HW shuts off

Greetings,
Well, June 2013 I bought my Satellite C855-2HW with Windows 8 as operating system.
The notebook worked smooth until in December 2013 I got Windows 8.1 updates.
Since then every day (sometimes several times a day) the notebook shuts off, the Automatic Recovery feature of Windows is initiated and the message 'Windows couldn't be started as it should, a system recovery is necessary.' pops up.
I've got this problem now for four weeks now and every time I have to install some software since the system is set to a previous recovery point.
I hope someone can help me get rid of this problem.
My sincere thanks in advance.
Stefan

Hi
It would be interesting to know how you installed / upgraded to Win 8.1 system.
Did you follow the Toshiba step by step instruction in order to update the Win 8.1 properly?
I mean this instruction:
http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/
I did it with my Toshiba notebook and I must say: no problems until now
Additionally you should not forget to install/update the Win 8.1 drivers provided by Toshiba
On Toshiba EU driver page (Win 8.1 update) you will find the installation instruction for Win 8.1 drivers. It shows you the drivers and tools which need to be removed, updated or installed again.
Im sure the notebook would run properly in case the Win 8.1 update would be done properly.

Win 8 Monthly Update - T430S WAN Miniport Problem

The May 2013 monthly update for Windows 8 leaves a Device Manager error, as well as an error message in Lenovo Solution Center. Four T430S machines receive push updates published by Microsoft every 2nd Tuesday of the month. After this month's push updates, all machines have the same WAN Miniport error in Device Manager.
2 machines were restored to before the May 2013 push updates, and the error went away. Unfortunately, out of the 13 or so updates, the one that appears to be causing the problem is a major update to the OS. However, the push updates do not cause any errors with T61Ps.
Unforutunately, the WAN Miniport cannot be uninstalled. It is part of the network stack. So far, the only way to avoid the problem is to disable Win 8 push updates on T430S machines.
Solved!
Go to Solution.

The T430S machines have Intel Ultimate-N 6300 AGN WLAN cards with 3 antennas.
A few months back, there were intermittitent issues with WLAN connectivity. Oddly, the signal strength was strong, but with intermittent internet access. After r&r (removing and replacing) with a new WLAN card from Lenovo, it did not fix the intermittent WLAN connectivity issues.
The WLAN connectivity issues were isolated to weak wireless N internet access performance from the Intel wireless AGN driver. Changing the wireless N channels at the router improved performance marginally (BTW, N channels have different power requirements that affect performance.) However, internet access was still intermittent.
Wireless N WLAN performance dramatically improved when the router was physically 10-15 feet away at most. Since this was not practical, the best work around was to disconnect the machine from the wireless N network and setup a wireless G network at the router. Since then, the range has been excellent with no intermittent connectivity issues.
So far, machines with KB2836988 have not affected wireless G connectivity and performance. Apparently, if you unhide the devices in Device Manager, KB2836988 created a second WAN Miniport for Network Monitoring #2. The second WAN Miniport is the device with the error. From my earlier post, the only was to get rid of the error is to do a system restore to a point before the May 2013 push updates and manually hide KB2836988.
I plan on doing a system restore on another T430S machine to get rid of the error. This time I am going to try and hide all of the other updates except for KB2836988. I am hoping by isolating the KB2836988 as the first push update, I can get rid of the WAN Miniport error. If all goes well, the other updates will be installed afterwards.

Satellite P845T-107 with Win 8 PRO but after Win 8.1 update it isn't PRO

Yesterday at Saturn Salzburg bought the notebook.
It has on the bottom a PRO Windows 8 label.
Unfortunately, I first initiated the update to 8.1 and then only a backup created on a USB stick.
Windows has muddled up the the Pro version after Win 8.1 update.
Can not join domain, as I expect from a PRO version actually.
How do I get the original Pro version again?
The label does so, that there must have been a Pro license.
How do I get the licenses number?
I'm A bit sour ... how Toshiba is helping me?
Ekkehard
+Message was translated by google translator+

Hi
Regarding to the Toshiba Satellite P845T-107 specification page, the notebook was preinstalled with Windows 8 64bit.
[Toshiba Satellite P845T-107 specification page|http://www.toshiba.de/discontinued-products/satellite-p845t-107/]
It was not Pro version.
You can also check all the details about this notebook on the Toshiba Unit Details
http://aps2.toshiba-tro.de/unitdetails/
I will need to put the serial number to get the information.

Battery Consumption Up Win 8.1 Update 1 W530

Fan is running at low audible level constantly with low program load, battery appears to be draining much faster than before 8.1 or 8.1 Update 1. Running Win 8.1 Update 1 Pro 64 bit, all latest lenovo updates and bios and latest windows updates. Below is "powercfg -energy" report: Power settings are set to default "Power Saver" settings, system is on battery.
Part 1 of two since the whole report exceed the maximum message number of characters
Power Efficiency Diagnostics Report
Computer Name
XXXXXXXX
Scan Time
2014-04-24T16:43:34Z
Scan Duration
60 seconds
System Manufacturer
LENOVO
System Product Name
2436CTO
BIOS Date
04/01/2014
BIOS Version
G5ET98WW (2.58 )
OS Build
9600
Platform Role
PlatformRoleMobile
Plugged In
false
Process Count
114
Thread Count
1308
Report GUID
{adabe916-5f3e-448c-af46-4024e448166e}
Analysis Results
Errors
USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device Name
Generic USB Hub
Host Controller ID
PCI\VEN_8086&DEV_1E26
Host Controller Location
PCI bus 0, device 29, function 0
Device ID
USB\VID_8087&PID_0024
Port Path
1
USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device Name
USB Root Hub
Host Controller ID
PCI\VEN_8086&DEV_1E26
Host Controller Location
PCI bus 0, device 29, function 0
Device ID
USB\VID_8086&PID_1E26
Port Path
USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device Name
USB Composite Device
Host Controller ID
PCI\VEN_8086&DEV_1E26
Host Controller Location
PCI bus 0, device 29, function 0
Device ID
USB\VID_046D&PID_C52B
Port Path
1,5
Platform Power Management CapabilitiesCI Express Active-State Power Management (ASPM) Disabled
PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer.

Part 2 of "Powercfg -energy" report. Bios is set to use onboard Intel HD4000 graphics only, Nvidia optimus is disabled , HD 4000 is set for maximum power savings on battery.
Warnings
Information
Platform Timer Resolutionlatform Timer Resolution
The default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the timer resolution is increased, processor power management technologies may not be effective. The timer resolution may be increased due to multimedia playback or graphical animations.
Current Timer Resolution (100ns units)
156258
Power Policy:Active Power Plan
The current power plan in use
Plan Name
OEM Power Saver
Plan GUID
{a1841308-3541-4fab-bc81-f71556f20b4a}
Power Policyower Plan Personality (On Battery)
The personality of the current power plan when the system is on battery power.
Personality
Power Saver
Power Policy:Video Quality (On Battery)
Enables Windows Media Player to optimize for quality or power savings when playing video.
Quality Mode
Optimize for Power Savings
Power Policyower Plan Personality (Plugged In)
The personality of the current power plan when the system is plugged in.
Personality
Power Saver
Power Policy:802.11 Radio Power Policy is Maximum Performance (Plugged In)
The current power policy for 802.11-compatible wireless network adapters is not configured to use low-power modes.
Power Policy:Video quality (Plugged In)
Enables Windows Media Player to optimize for quality or power savings when playing video.
Quality Mode
Balance Video Quality and Power Savings
System Availability Requests:Analysis Success
Analysis was successful. No energy efficiency problems were found. No information was returned.
CPU Utilizationrocessor utilization is low
The average processor utilization during the trace was very low. The system will consume less power when the average processor utilization is very low.
Average Utilization (%)
1.79
Battery:Battery Information
Battery ID
8921SANYO45N1017
Manufacturer
SANYO
Serial Number
8921
Chemistry
LION
Long Term
1
Sealed
0
Design Capacity
93240
Last Full Charge
83170
Battery:Battery Information
Battery ID
47923LGC45N1011
Manufacturer
LGC
Serial Number
47923
Chemistry
LION
Long Term
1
Sealed
0
Design Capacity
93600
Last Full Charge
92480
Platform Power Management Capabilitiesupported Sleep States
Sleep states allow the computer to enter low-power modes after a period of inactivity. The S3 sleep state is the default sleep state for Windows platforms. The S3 sleep state consumes only enough power to preserve memory contents and allow the computer to resume working quickly. Very few platforms support the S1 or S2 Sleep states.
S1 Sleep Supported
false
S2 Sleep Supported
false
S3 Sleep Supported
true
S4 Sleep Supported
true
Platform Power Management Capabilities:Connected Standby Support
Connected standby allows the computer to enter a low-power mode in which it is always on and connected. If supported, connected standby is used instead of system sleep states.
Connected Standby Supported
false
Platform Power Management Capabilities:Adaptive Display Brightness is supported.
This computer enables Windows to automatically control the brightness of the integrated display.
Platform Power Management Capabilitiesrocessor Power Management Capabilities
Effective processor power management enables the computer to automatically balance performance and energy consumption.
Group
0
Index
0
Idle State Count
3
Idle State Type
ACPI Idle (C) States
Nominal Frequency (MHz)
2401
Maximum Performance Percentage
100
Lowest Performance Percentage
49
Lowest Throttle Percentage
5
Performance Controls Type
ACPI Performance (P) / Throttle (T) States

Adobe updater is crashing with adobe photoshop elements 6 and mac os version 10.9.4 (on a brand new install) . How to overcome this ?

adobe updater is crashing with adobe photoshop elements 6 and mac os version 10.9.4 (on a brand new install) . How to overcome this ?

Maybe I typed it wrong ...it is unchecked.
This is the message I receive:
Process:         Adobe Updater
Path:            /Applications/Utilities/Adobe Utilities.localized/*/Adobe Updater.app/Contents/MacOS/Adobe Updater
Identifier:      "com.Adobe.ESD.AdobeUpdaterApplication"
Version:         Adobe Updater 5.1.0.1082 (5.1.0.1082)
Code Type:       X86 (Native)
Parent Process: launchd
Responsible:     Adobe Updater
User ID:         501
Date/Time:       2014-11-21 12:39:47.691 -0600
OS Version:      Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 42CCAEE7-C520-BA70-4B27-711A184AB1A5
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
abort() called
terminating with uncaught exception of type std::runtime_error: Unable to determine registration filepath!
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib        0x93982952 __pthread_kill + 10
1   libsystem_pthread.dylib       0x96f15167 pthread_kill + 101
2   libsystem_c.dylib             0x940f029c abort + 155
3   libc++abi.dylib               0x99fe06c9 abort_message + 169
4   libc++abi.dylib               0x9a00147d default_terminate_handler() + 264
5   libc++abi.dylib               0x99ffec30 std::__terminate(void (*)()) + 14
6   libc++abi.dylib               0x99ffe64b __cxa_throw + 116
7   "com.Adobe.ESD.AdobeUpdaterApplication"0x0004e4a3 0x1000 + 316579
8   "com.Adobe.ESD.AdobeUpdaterApplication"0x00056f19 0x1000 + 352025
9   "com.Adobe.ESD.AdobeUpdaterApplication"0x00024499 0x1000 + 144537
10 "com.Adobe.ESD.AdobeUpdaterApplication"0x000139c0 0x1000 + 76224
11 "com.Adobe.ESD.AdobeUpdaterApplication"0x00002912 0x1000 + 6418
12 "com.Adobe.ESD.AdobeUpdaterApplication"0x0000282d 0x1000 + 6189
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib        0x93983992 kevent64 + 10
1   libdispatch.dylib             0x96f1e899 dispatchmgr_invoke + 238
2   libdispatch.dylib             0x96f1e532 dispatchmgr_thread + 52
Thread 2:
0   libsystem_kernel.dylib        0x93983046 __workq_kernreturn + 10
1   libsystem_pthread.dylib       0x96f15dcf pthreadwqthread + 372
2   libsystem_pthread.dylib       0x96f19cce start_wqthread + 30
Thread 3:
0   libsystem_kernel.dylib        0x93983046 __workq_kernreturn + 10
1   libsystem_pthread.dylib       0x96f15dcf pthreadwqthread + 372
2   libsystem_pthread.dylib       0x96f19cce start_wqthread + 30
Thread 4:
0   libsystem_kernel.dylib        0x93983046 __workq_kernreturn + 10
1   libsystem_pthread.dylib       0x96f15dcf pthreadwqthread + 372
2   libsystem_pthread.dylib       0x96f19cce start_wqthread + 30
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xa10e2c0c ecx: 0xbffff0dc edx: 0x93982952
edi: 0xa13a31a8 esi: 0x00000006 ebp: 0xbffff0f8 esp: 0xbffff0dc
   ss: 0x00000023 efl: 0x00000206 eip: 0x93982952   cs: 0x0000000b
   ds: 0x00000023   es: 0x00000023   fs: 0x00000000   gs: 0x0000000f
cr2: 0x99fe3e46
Logical CPU:     0
Error Code:      0x00080148
Trap Number:     132
Binary Images:
    0x1000 -   0x24cff7 +"com.Adobe.ESD.AdobeUpdaterApplication" (Adobe Updater 5.1.0.1082 - 5.1.0.1082) <3D59867C-5698-4D46-AD1F-C357C48B75AA> /Applications/Utilities/Adobe Utilities.localized/*/Adobe Updater.app/Contents/MacOS/Adobe Updater
0x3ce000 -   0x3d9fff com.apple.CommerceCore (1.0 - 42) <D28DD970-4B69-3848-9BCC-3C67323B3D9C> /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/Frameworks/CommerceCor e.framework/Versions/A/CommerceCore
0x493f000 - 0x4964ff9 com.apple.framework.familycontrols (4.1 - 410) <A33A97EE-C735-38BA-9B49-5D78DAA3DEDA> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyControls
0x8fea6000 - 0x8fed8417 dyld (239.4) <0F2176BD-4239-3506-BA41-3B885269520E> /usr/lib/dyld
0x90008000 - 0x90023ff5 com.apple.openscripting (1.4 - 157) <5C161A52-8D2F-3D56-A988-05727BED7A59> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework /Versions/A/OpenScripting
0x90024000 - 0x90025fff liblangid.dylib (117) <F18F76C6-7E4B-34AD-AE81-C1C031BF2F7D> /usr/lib/liblangid.dylib
0x90026000 - 0x90109ff7 libcrypto.0.9.8.dylib (52) <D3AB1D26-30BA-36D3-956C-EC7D7185C396> /usr/lib/libcrypto.0.9.8.dylib
0x9010a000 - 0x90135ff7 libsystem_network.dylib (241.3) <71EBA489-386D-3608-ADE6-CB50EBD1AB1B> /usr/lib/system/libsystem_network.dylib
0x90136000 - 0x9052effb com.apple.CoreGraphics (1.600.0 - 599.35.4) <2B46D887-CAED-30F3-B009-1EBF0C71DC2E> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics
0x9069c000 - 0x906a5fff com.apple.audio.SoundManager (4.1 - 4.1) <68B7CEB7-AF09-3E24-8548-6ABF065B5186> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.framework/V ersions/A/CarbonSound
...and it goes on and on.
Joy (Awbrey) Schichtl
[email protected]

Since 3.6 update firefox crashes while opening pdf's in webmail (xs4all)

Since the 3.6 update firefox crashes AFTER pdf's opening in webmail. I can see, work and download the pdf file, but as soon as i change or stop this action, firefox crashes immediatly. I was waiting for updates, asked my provider but still not solved.
It is hard to test yourselve since you need to log in to a webmail..
== URL of affected sites ==
https://webmail.xs4all.nl

Ok, if a new profile profile has the same issue, it's an indicative that it's something outside Firefox that is causing this problem. This may be a plugin (they are installed outside the browser, and new profiles will have all installed plugins enabled), a virus, malware, a firewall/antivirus/security suite, or any other software outside Firefox. It's not a known issue, and I can't replicate it on my end, so you'll have to search for the cause yourself. Do be aware that Firefox's update may have broken something in how other software gets along with Firefox, and that may be the cause of the crashes. Malware too, so do clean your system.
To scan for malware, install, update and run these programs ''in this order''. They are all free for personal use, but some have limited functionality in their "free mode", but the features you'll miss are not really needed to find and remove the problem you have. Remember that ''not all programs detect the same malware''!
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php malwarebytes.org/mbam.php]
SuperAntispyware - [http://www.superantispyware.com/ superantispyware.com]
AdAware - [http://www.lavasoftusa.com/software/adaware/ lavasoftusa.com/software/adaware]
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html safer-networking.org/en/index.html]
Windows Defender - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx microsoft.com/windows/products/winfamily/defender/default.mspx]
Dr. Web Cureit - [http://www.freedrweb.com/cureit/ freedrweb.com/cureit]
If these don't find it or can't clear it, please tell me and I'll provide you with further assistance.

Starting All Over With OS X and Safari After Update And Crashes

I had posted my troubles in the Safari Section under the same title and got fabulous advice. I was just starting the process of following this advice so that I could get my mac back up from 10.4.7 to 10.4.11 since the genius' at the bar at Apple had re-installed the OS to fix the crashing Safari, Mail and Software update apps.
The advice suggested starting with a permissions repair and a disk verify. Well disk verify may well have come up with the cause for my computer going foobar upon installing the last Apple update in the first place. (Incredible that the Genius Bar guys missed this, especially the week before when I had taken my Mac Mini in for a Procare "Tune-Up." I wonder what the H-E Double Hockey Sticks they did if they didn't verify the disk in the tune-up? Wouldn't that have saved me all manner of distress and trouble!) Here is what verify gave me:
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid index key
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So..I will need to, if I understand this correctly, re-start from my install disc holding down the C key and then go to disk utility. I have never done this before and really would like some one to walk me through the procedure.
Just to remind or get you up to speed. I have a mac mini that had been bought with 10.3.7 on it and had been updated all the way to 10.4.11 and Safari 3.0.4 but after the last Java, Quicktime, and Security update Safari, Mail, and Software Update all crashed repeatedly. Genius Bar at Apple got them working again by re-installing the OS but put in 10.4.7 and with it Safari 2.0.4. Now I will need to repair the start up disk. Do I use the Mac Mini "Mac OS X install disc 1 and Apple Hardware Test" disc or do I use the "Mac OS X Tiger" disc that I bought to upgrade my Mac from Panther to Tiger? I think the former rather than the latter but I am uncertain and would really like to know exactly what I need to do before proceeding. Please help!
Then.. what do I do after I re-start using the install disc and have gone to Disk Utility. Will it then darken the "repair" button under "disk," and allow me to click on that to repair the disk? What will that do to the applications and documents that I have in the mac. I actually have my iTunes and iPhoto libraries on external hard drives and are backed-up on yet another external hard drive. I think everything is backed-up. I will perform another back-up before I do anything anyway. Do I leave the externals on and connected while doing the re-start using the install disc or do I disconnect them?
As you can tell, this makes me rather nervous. Thank you so much for any help you can offer! -Charlotte

Hi. Sorry for the delay in responding; Holidays as you know. Anyway... Thanks for your advice.
Yes, I put in the Tiger install disc and holding the c key restarted the computer. Went to Disk Utility and ran Repair Disk. Did it twice as you suggested. The first time it said that there was nothing to repair which was a complete surprise. Ran the verify again and ran Repair Disk again. Each time the report shows no problems. After booting back into the main internal hard drive, I ran disk verify again and it reports no problems.
Someone else on a different post on this subject (I accidently posted this in two different places) stated that the Apple Disk Utility Repair would not be able to make this repair and I would have to get Disk Warrior to make the repair. If Disk Verify reports no problems, wouldn't this mean that running the Repair Disk did repair it?
After all this I went to Apple's site and got the combo update and ran Software Update and gotten my little ppc Mac Mini back up to 10.4.11 and Safari 3.0.4. (I ran permissions repair after the updates as well.) I did not, however, download the last Security Update, as some posters have suggested that I avoid it. What do you think of the Security Update 2007-009? Would this be safe to download and install, now that my mac seems to have had it's directory repaired? Thanks so much. -Charlotte

I had an older version of Firefox on older Mac OS 10.3.9. Tried to update. Crashed the Mac. Lost things saved on my desktop and Firefox that I had benn using for years is gone. Is there an older version I can reinstall?

I had an older version of Firefox on older Mac OS 10.3.9. Tried to update. Crashed the Mac. Lost things saved on my desktop and Firefox that I had benn using for years is gone. Is there an older version I can reinstall?

Hello kc9agz,
Thank you for contacting Mozilla Support. Did you back up your bookmarks before you moved to the new computer? You can find more information about backing up and restoring bookmarks in this article.
[[Restore bookmarks from backup or move them to another computer]]
Please let us know if this solves your issue.
Cheers,
Patrick

Adobe 'Update service' Crashing

I keep getting notifications about the update service crashing, every 8 or so hours. I'm wondering what this is. It's has caused me a few problems such as exiting me out of my games evey once and a while, nothing major, bit it is beginning to get on my nerves. Next time it happens I will provide a picture but for now I seem to be unable to take screenshots. I don't even need to have my internet browser open or anyhting at uses flash, as far as I've seen.
Version: 11.3.31.222
OS: Windows XP
I would much appreciate any help. I would be happy to supply system information If it is required.
Thank you in advance.

Please install one or both of the installers referenced in this post. This should take care of the update service from crashing.
http://forums.adobe.com/message/4594596#4594596
Thanks,
Chris

Wine game Virtual Pool 4 crashes on startup [SOLVED]

Hi i am having trouble getting a game to load in wine (Virtual Pool 4) it crashes when i run it. I did the wintricks and wincfg settings from this guide http://www.celeris.com/forum/viewtopic.php?f=2&t=2401
I am using a 32bit wine prefix and im using the amd drivers with xorg 1.16. Here is the wine info:
fixme:toolhelp:CreateToolhelp32Snapshot Unimplemented: heap list snapshot
fixme:heap:RtlSetHeapInformation (nil) 1 (nil) 0 stub
fixme:mountmgr:harddisk_ioctl Unsupported ioctl 74080 (device=7 access=1 func=20 method=0)
fixme:mountmgr:harddisk_ioctl Unsupported ioctl 2d1400 (device=2d access=0 func=500 method=0)
fixme:mountmgr:harddisk_ioctl Unsupported ioctl 74080 (device=7 access=1 func=20 method=0)
reg numbers = 0, 5223, 0, 16875
reg numbers m = 0, 5223, 0, 16875
ssSocket::Create - WARNING: Recv buffer size set to 65536, requested size was 32768
ssSocket::Create - WARNING: Send buffer size set to 65536, requested size was 32768
Registered - ****-****-****-****-****-****
fixme:win:EnumDisplayDevicesW ((null),0,0x32d254,0x00000000), stub!
fixme:d3d9:Direct3DShaderValidatorCreate9 stub
fixme:win:EnumDisplayDevicesW ((null),0,0x32cb84,0x00000000), stub!
fixme:dxgi:dxgi_output_GetDesc iface 0x6401ee8, desc 0x32d038 stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x32bc34,0x00000000), stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x32c214,0x00000000), stub!
fixme:wbemprox:client_security_SetBlanket 0x7bf7b610, 0x5fc61f8, 10, 0, (null), 3, 3, (nil), 0x00000000
fixme:wbemprox:client_security_Release 0x7bf7b610
fixme:wbemprox:enum_class_object_Next timeout not supported
fixme:wbemprox:enum_class_object_Next timeout not supported
fixme:wbemprox:wbem_services_CreateInstanceEnum unsupported flags 0x00000030
fixme:dsound:IKsPrivatePropertySetImpl_Get unsupported property: {f2957840-260c-11d1-a4d8-00c04fc28aca}
fixme:wbemprox:enum_class_object_Next timeout not supported
fixme:wbemprox:enum_class_object_Next timeout not supported
fixme:win:EnumDisplayDevicesW ((null),0,0x326f7c,0x00000000), stub!
fixme:win:EnumDisplayDevicesW (L"\\\\.\\DISPLAY1",0,0x326c34,0x00000000), stub!
fixme:win:EnumDisplayDevicesW ((null),1,0x326f7c,0x00000000), stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x327474,0x00000000), stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x327024,0x00000000), stub!
fixme:ddraw:ddraw7_Initialize Ignoring guid {67685559-3106-11d0-b971-00aa00342f9f}.
ssDisplayD3D::GetDedicatedVideoMemorySize - reporting dedicated video memory size as 1029 MB (1078984704)
ALSA lib dlmisc.c:252:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so
ALSA lib dlmisc.c:252:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so
err:ole:apartment_getclassobject DllGetClassObject returned error 0x80040111
err:ole:CoGetClassObject no class object {da4e3da0-d07d-11d0-bd50-00a0c911ce86} could be created for context 0x1
fixme:msacm:acmFormatEnumW Unsupported fdwEnum values 00100000
err:ole:CoInitializeEx Attempt to change threading model of this apartment from multi-threaded to apartment threaded
wine: Unhandled page fault on read access to 0x64754120 at address 0x3553efa4 (thread 0009)
Sorry guys managed to get it working it by installing the full d3dx9 and wmi seems to be loading fine now.
Last edited by SeanP (2015-02-15 18:28:21)

Ok. I downloaded the PKGBUILD from AUR but makepkg failed because tomboy.desktop didn't exist in the directory where the source is downloaded from. So here's what I did:
I downloaded tomboy.desktop from AUR and copied it in $startdir/src/tomboy.desktop and deleted tomboy.desktop from the PKGBUILD line:
source=(http://www.beatniksoftware.com/tomboy/releases/$pkgname-$pkgver.tar.gz tomboy.desktop)
So the source line now says:
source=(http://www.beatniksoftware.com/tomboy/releases/$pkgname-$pkgver.tar.gz)
And now I have a working Tomboy
A

IE11 on WIn 8.1 Update 1 crashes. AppHangTransient

Similar Messages

Maybe you are looking for