IE11 tabs sometimes flash and close by themselves

On a Windows 7 x64 computer with IE11, when I switch back and forth between different tabs, the tab that I left will sometimes flash a few times. Then if I go back to that flashing tab, it sometimes closes by itself, even though I have not clicked on the
red 'x' to close it. This behavior just started about a week ago, and I have tried resetting IE settings, but no luck. If I roll back to IE10, I don't have this problem. Please advise.
eQuilter

Hi,
Some 3rd add-ons may cause ie performance issue. I suggest you try running IE in No Add-on mode to check if this issue still occurs.
Fix Internet Explorer issues to make IE fast, safe and stable
http://support.microsoft.com/mats/ie_performance_and_safety
Andy Altmann
TechNet Community Support

Similar Messages

  • Software issue iphone 4s:Apps open and close by themselves almost as if someone is pressing the buttons, anyone have this issue?

    Recieved my 3rd iphone  4s due to battery issues and got another dud. While in use, the apps  will open and close on there own, email will get deleted while I'm reading them or archived. while looking through my contacts directory, the phone will select a contact creating an outbound call. This is frustrating. Any one else have this issue?

    Hi Ralph9430,
    I've tried this numerous times and have the same issue. I've even restored the phone to factory settings and removed everything and problem persists.
    Cheers

  • I did an update to iOS 4.2 and now several of my applications won't open. My iBook shelf is empty and won't open. I click on it and it just flashes and closes. What is the problem?

    I did an update to iOS 4.2 and now several of my apps won't work. Help!

    The very first thing you should try is a simple reset. Hold down on the sleep button and the home button at the same time for about 10 seconds until the Apple logo appears on the screen, let go of the buttons and let the iPad restart.
    If you haven't restarted your iPad in a while this can really help.
    If this doesn't help, then you can try removing the problem apps and reinstalling them.
    Retired Engineer makes a good point.  It would be a good idea to update your software.

  • Different programmes crash and close

    Hi all,
    I've been using my imac for years now and never had any problems. Since a short while though, programmes crash and close by themselves. I have not found any logic in it yet because a lot of programmes do this at different moments - safari, mail, iphoto, garageband, you name it.
    Its frequency is slowly increasing and I have no idea qwhat to do about it. I have not installed any new software so it can't be that, it does feel like it might have something to do with an official software update or something because at the same time this started, my safari has also started to show a black screen with "top sites" (Sites I visit often) when I open a new tab. I've not asked for this and find it highly annoying, do not know when this started and how to turn it back to normal. This might have something to do with it.
    Also there are a couple of websites that always cause safari (and firefox!) to close, nevertheless software also crashes and closes without me having safari or firefox open so it can't just be the internet. This is driving me crazy, anybody heard of this or know what to do?

    Hi jedn, and a warm welcome to the forums!
    Very Important, how much Free Space is on your Hard Drive first of all?
    Could be many things, we should start with this...
    Boot off your original Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some models have a separate AHT CD.
    If that passes...
    "Try Disk Utility
    1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Random mouse movements and folders open and close unaided

    The mouse cursor wanders around the screen, folders open and close by themselves, dashboard opens and closes, etc. Either a bit of malware or a hardware problem?

    See if this -> http://www.thesafemac.com/mmg-infected/#remotecontrol - addresses your problem.
    Good luck,
    Clinton

  • Firefox doesn't accept some sites and IT'S FREEZING sometimes and you can't write anything or click anywhere...reaaly disaponting, I have to restart it and after a while same thing, I can't close any tab only by options close tab.

    Firefox doesn't accept some sites and IT'S FREEZING sometimes and you can't write anything or click anywhere...reaaly disaponting, I have to restart it and after a while same thing, I can't close any tab only by options close tab so you can't use Command Q or Command R for reloading...GRRRRRrrrr, hate this

    As I asked previously are you able to have tabs open as a window by using the right clicking option ?
    When you close Firefox you should use
    *'''Firefox button -> File -> Exit '''
    Are you doing that ?
    I suspect what may be happening is Firefox is hanging as it closes down.
    * see [[Firefox hangs or is not responding - How to fix#w_firefox-hangs-when-you-quit-it]]_firefox-hangs-when-you-quit-it
    * this explains how to check & if necessary kill the process [["Firefox is already running but is not responding" error message - How to fix it#w_end-firefox-processes]]_end-firefox-processes
    A related possible problem is that you may have built up many copies of the restore files. These are stored in the Firefox profile. The easiest method of finding the profile location istouse
    *use '''Firefox button -> Help -> Troubleshooting Information <br /> -> [Show Folder]'''
    *see [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]
    You need to look for the files ''sessionstore.js'' and numbered duplicates of that. Delete them.
    * see http://kb.mozillazine.org/Firefox_hangs#Multiple_sessionstore.js_files

  • Bug - If more then one tab is open and you try to swap tabs or close a tab Firefox closes completely sometimes. This happens on a desktop and 2 laptops I own.

    The first time I reported this was Jul 12. The link back did not work. Since Jul 12 I have been on my daughters desktop, my girlfriends desktop, my laptop and desktop and they will all do the same thing periodically. When more than one tab is open and you try to swap or close a tab Firefox closes completely.
    When I re-open Firefox I never get an error message to report back to Firefox support. Most of the time I get the "This is embarrassing" message and the restore tabs works.
    I should have been reported by other people. Please respond, I will check my email a few times a day, Thank you

    (previous message was https://support.mozilla.com/en-US/questions/849469
    you are supposed to update that message for more help, likely no one has an answer).
    If it were the last tab not multiple tabs then it would have been:
    If you only had one tab open and id not always show the tab strip, that you would close the tab bar.
    Tools > Options > Tabs > [x] Always show the tab bar
    Make sure you have that option on, it is easy to restore a tab if you still have the tab bar you or something closes two tabs as you say. To restore last tab use Ctrl+Shift+T , if two tabs restore that tab as well with same shortcut. Rather than fishing around for it in the History menu as a closed tab, closed window, or a previous session.
    Another possibility is that if there is one extension that mixed up the options like "Close Tab by Double Click" there are probably other extensions that did that as well. If you had that you might have to use the much larger "Tab Clicking Options" and turn off everything but closing a tab on double-click.
    : https://addons.mozilla.org/en-US/firefox/addon/tab-clicking-options/
    : which is not updated for Firefox 5.0, so you would have to override compatibility (it works) with
    * https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
    You can make Firefox '''Firefox 5.0''' look like Firefox 3.6.19, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 5.0, or 4.0.1, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''

  • Sometimes when I close Firefox and try to open it in few moments it shows me message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, I haven't o

    Sometimes when I close Firefox and try to open it in few moments it shows me message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, I haven't opened any additional Firefox related programs, and previous Firefox is closed. First I though it is because of my computer, but then I discovered that other people have the same problem as well
    == This happened ==
    A few times a week
    == some 2 month ago ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; InfoPath.2; .NET CLR 3.0.30729)

    Hi Andis.
    First of all, this is completely normal behavior, although it's a bit irritating, I know. What happens is that when you close Firefox, despite the window disappearing right there and then, Firefox keeps running for a little bit until the whole closing procedure is completed. This can take a fraction of a second on fast computers, or can take a few seconds on slow computers or when Firefox is storing a large session (if you save your tabs). All you have to do is wait a bit until Firefox closes, and then open it again.
    To see if it's still running, you can press CTRL+SHIFT+ESC and then, under the Processes tab, you can see if firefox.exe is still there. If it's taking an unusual amount of time to close (which happens very rarely, and only if the browser freezes on exit), you can force the application to terminate from this application (task manager).
    Firefox 4.0 will reduce by 97% the time it takes firefox.exe to close, so this problem will be basically erased for Firefox's next version.
    Until then, I can recommend you this extension, which helps you restart your browser more easily and without bothering about closing times:
    https://addons.mozilla.org/en-US/firefox/addon/3559/
    Hopefully this will help.

  • Whenever I open new tabs Firefox crashes and the browser window closes automatically.what will I do?

    I am facing this problem since a month.I never faced this problem before.I always feel good to use Mozilla Firefox as my browser.I used to open multiple tabs in a same browser window.For example- in a tab I logged in to Facebook,at same time I might be downloading songs or something else or open another site in the other tab.It might be 2 or 3 tabs sometimes.But now a days,I am facing the problem whenever I open multiple tabs.Its unusual and so much annoying.The Firefox crashes and the browser window closes showing a messege to send an error report.Please Help me.
    N.B. - I am using the Windows service pack 2.
    RAM - 2 GB
    Hard disk MEmory - 250 GB.

    I had this same problem. Seems to be caused by the web developer tool bar FF extension (this started happening after a recent update to that extension). After disabling it, my FF is back to normal :)

  • Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems n

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

  • How can I enable the center mouse click to open and close tabs in Firefox and Chrome?

    I have a MacBook Pro Model A1261 purchased in 2009. On my other mac at work (and my PC) I can center click to open a link in a new tab while in Chrome or FireFox, and also to close a tab by clicking on it in the tabs at the top. I am using an external USB mouse on my MacBook Pro and when I click the center scroll wheel it brings up the dashboard. I looked in the settings but wasn't able to find a way to change that setting for the center button to open and close tabs in my web browser. Is there a way? Please help!

    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    * browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
    * browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
    * browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
    * browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
    * browser.gesture.pinch.latched -> <b>false</b>
    *http://kb.mozillazine.org/about:config
    See also:
    *pinchy: https://addons.mozilla.org/firefox/addon/pinchy/

  • FF31: When I only have one tab open, even a blank one, and close the tab the window closes.

    FF31: When I only have one tab open, even a blank one, and close the tab the window closes.

    Type '''about:config''' in the Location bar and hit '''''Enter'''''.
    ''Accept the warning.''
    '''browser.tabs.closeWindowWithLastTab'''
    double-click to toggle to '''false''' and then restart Firefox.
    Now if you close the last tab the window (or Firefox) won't close, but a New Tab will be there.

  • My firefox always opens a crash report when I close it. Even if I have no tabs open and close firefox.

    The Crash information is:
    AdapterDeviceID: 95c4
    AdapterVendorID: 1002
    Add-ons: TFToolbarX@torrent-finder:1.2.6,{1de0de3c-0b5c-4f67-90c6-689623894991}:0.3,{9fb7d178-155a-4318-9173-1a8eaaea7fe4}:2.1.11,{B17C1C5A-04B1-11DB-9804-B622A1EF5492}:1.2.1,{c0c9a2c7-2e5c-4447-bc53-97718bc91e1b}:5.4,{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}:1.3.9,{D4DD63FA-01E4-46a7-B6B1-EDAB7D6AD389}:0.9.8,{ef4e370e-d9f0-4e00-b93e-a4f274cfdd5a}:1.4.4,{b9db16a4-6edc-47ec-a1f4-b86292ed211d}:4.9.5,[email protected]:4.0.2,{1E73965B-8B48-48be-9C8D-68B920ABC1C4}:10.0.0.1410,avg@igeared:7.008.031.001,[email protected]:1.3.5
    AvailableVirtualMemory: 3804364800
    BuildID: 20110902133214
    CrashTime: 1316851060
    EMCheckCompatibility: true
    Email: [email protected]
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1315413340
    Notes: AdapterVendorID: 1002, AdapterDeviceID: 95c4, AdapterDriverVersion: 8.872.0.0
    D2D? D2D+
    DWrite? DWrite+
    D3D10 Layers? D3D10 Layers+
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 452
    StartupTime: 1316850895
    SystemMemoryUsePercentage: 78
    Theme: LavaFox_V1-Blue
    Throttleable: 1
    TotalVirtualMemory: 4294836224
    URL: https://support.mozilla.com/en-US/questions/new?product=desktop&category=d2&search=My+firefox+always+opens+a+crash+report+when+I+close+it.+Even+if+I+have+no+tabs+open+and+close+firefox.&showform=1
    Vendor: Mozilla
    Version: 6.0.2
    Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 :
    MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [RAW/IP] : 2 : 3 :
    MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
    MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
    RSVP TCPv6 Service Provider : 2 : 1 :
    RSVP TCP Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    RSVP UDPv6 Service Provider : 2 : 2 :
    RSVP UDP Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    This report also contains technical information about the state of the application when it crashed.

    Have a read of the rather complicated article
    * [[firefox crashes]]
    * and for anyone with firefox crashing before you can key in about:crashes see: <br/> http://kb.mozillazine.org/Breakpad#Location_of_crash_reports
    I note you have found bp-54df2ba6-de52-405d-9ccc-4dd272110924 have you any other recent crash signatures or crash IDs, the one you provide seems rather uncommon [https://crash-stats.mozilla.com/report/list?product=Firefox&query_search=signature&query_type=exact&query=karasx2.dll%400x2535&reason_type=contains&date=09%2F24%2F2011%2001%3A44%3A07&range_value=1&range_unit=weeks&hang_type=any&process_type=any&do_query=1&signature=karasx2.dll%400x2535 [karasx2.dll%400x2535]]
    Do you still get the problem in [[safe mode]] and with default themes, and all plugins disabled. Note common causes of crashes are malware, and versions of the software IDvault. (do you use IDvault ? - often provided by Comcast)

  • My macbook is going to sleep while I'm working or viewing something. I will sometimes have to open and close it several times to get it to "wake up" again. Any suggestions?

    my macbook is going to sleep while I'm working or viewing something. I will sometimes have to open and close it several times to get it to "wake up" again. Also, no sound comes out of my Macbook. I only hear with earbuds or headphones. Any suggestions?

    If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
    Triple-click anywhere in the line below to select it:
    syslog -k Sender kernel -k Message CSeq "Previous Shutdown" | tail | open -f -a TextEdit
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

  • The first tab I have never closes and when I open a second one and close that the whole browser will close. Is this a bug?

    Since downloading the 4.0 beta, in both versions (4.0 and 3.6) I can't close the first tab that is opened when I start the browser. I click the red close button and nothing happens but if I open another tab and close that then it will close and the whole browser will close. I have uninstalled the beta version and the 3.6 version and reinstalled the 3.6 version but it hasn't made a difference.

    JUst experienced the exact  same problem after changing password.Getting same message. Hope someone has an answer for this.

Maybe you are looking for

  • Video as separate library set up question

    I have quite a large amount of purchased video on the internal harddrive of my powerbook. I would like to move most of video to a library on an external hard drive, but leave podcasts and music on the laptop. Can I create a new user account on the la

  • How can I create a data connection without ODBC (directly with OLE DB)

    If connecting to an OLE DB data source, which is not defined as ODBC, the well known error message appears in Acrobat, that the environment is not trusted. The Designer Help says, that the document must be certified in Acrobat to run OLE DB without O

  • LR2 problems after upgrading to Mac OS X 10.6.3

    Hi everyone, I'm having problems with Lightroom 2 under Mac after upgrading to OSX 10.6.3. For example when I'm trying to export long images sequence, it does freeze the Lightroom and I have to Force Quit it. Someone recommended me to rebuild index h

  • Browsing from "Mappings" gives an IO Error

    We are running CFMX7 on a Windows 2003 server. Everything seems to work well, but when you go to Mappings and try to browse, you get a Server Error: IO error on server communication. Does anyone have anymore information on this? The error doesn't see

  • Report RPLHZPT2 in CZ

    Hello togehter, my colleagues from CZ have problems with the standard report RPLHZPT2. I already created a OSS but I didn't know for what this report is used! Can someone explain me for which process this report is used in CZ? THX Thomas