IE7.0 problems (IdeaCentre K210 - 53134BU)
Hello again guys, it appears that no one has been able to help me with some of the other problems that I am having with my IdeaCentre K210 - 53134BU system, let's see if any has experienced and/or, might have an idea of what's going on with Internet Explorer?
First off, IE takes "forever" to load and I say this because I also have Mozilla and am using it instead of IE because of the loading problem but more because IE seems to crash / lock (for no apparent reason)!
I have noticed that if I open Yahoo Mail with IE and the note has a hyperlink to a Website, if I clink on the link a BLANK new page opens up and after a few minutes, I see Not Responding and have to close IE.
I also noticed that if I have three SEPARATE IE sessions open and one of the sessions advises me NOT RESPONDING, when I close that sessions ALL IE windows/sessions shut down.
This is a MAJOR nuisance and I do NOT use IE and was wondering am I alone or have any of you also had problems with IE?
Thanks,
Bob
hi
did you try removing it completly or try to use IE8 beta 2?
IE8 can reopen tabs which have either crashed or have been closed which are un-responsive try it..
Cheers and regards,
• » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo
Similar Messages
-
Onekey & Partitioning - IdeaCentre K210 - 53134BU
Hi, I Partitioned the (BIG) K210 "C" Drive into a "C" Drive for Vista and Onekey Rescue & Recovery, a "D" Drive which I use to install programs and apps, an "E" Drive where I keep the data files and a "F" Drive for photos.
My question is, if I ever need to use Onekey R&R, will my Hard Drive be Partitioned back to factory setting of one BIG "C" Drive or will Onekey only install Vista and the Lenovo "freebies" (that came with the system) on the newly partitioned "C" Drive and leave the "D", "E" and "F" Drives / Partitions that I created alone?
Thanks,
Bob
P.S.- I POSTED this message on the Lenovo 3000 Desktop board and although this applies to any Lenovo system with Onecare, I think that it would be more appropriate that I re-post it on this boardBob,
That's a great question. I believe we have a K210 in the lab and we should try this to confirm the results.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Lenovo IdeaCentre K210 freezes
Hi,
I have a Lenovo IdeaCentre K210 and it constanlty freezes. Can anyone help me on this? I have not been able to solve the issue.
Maybe a problem with USB?
Thanks!
HjekoBesides that, I use CardFila.com to collect all business cards on iPhone. You can do this on Android, computer, laptop.
So easy to collect, find and use any contact at any time.
You can access the contacts everywhere without Internet connection by using CardFila for Mobile (iPhone or Android phones). If you like, you can try it on -
Hi, I have an IdeaCentre K210 system that came standard with 3GB of RAM and would like to upgrade to 4GB, preferably 6GB of RAM and would appreciate H-E-L-P!
I assume that I have 2GB module and a 1GB module and will have to "throw away" the 1GB RAM and have 2 questions. first, WHAT type of RAM does the IdeaCentre K210 have (what type of RAM do I need to purchase) and second, can the system "handle" 6GB or is 4GB the maxium capacity available on the IdeaCentre K210 system?
Thank you,
Bob
P.S.- so far the only upgrades that I have made was adding another 500GB HDD (for a total of 1T), are their any upgrades that someone has made that they would recommend to the IdeaCentre K210 for other users to consider?Can you run Everest to see what chipset do you have?
IPnaSh
First Spanish Community Guru - Colaborador ad honorem -
Help!!!
I'm having a problems getting a site to work in IE7. It works
fine in Firefox, but in IE7, not a chance.
Here's the
Link
Once in the site, go to the Gallery. Click on any of the two
thumbnails on the left. A window will open with a short blurb and a
choice of 2 or 3 links. Select the slideshow. The slideshow will
load up and start fine. Close the window and click the other
thumbnail. It won't load up (To be clear here, both the thumbnails
have an "on release" javascript in them), Nothing! Click on any of
the other links on the top... About, Contact, etc. They won't load
up either. As a matter of fact, you won't even be able to refresh
the page. This does't happen in FireFox. It works beautifully
there, just as it should.
Is there a fix for this IE7 Problem? Is it a simple
JavaScript that I need?
Any help is greatly appreciated.
KevinSeems to work here. IE7, Win XP Pro.
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
"Kunger88" <[email protected]> wrote in
message
news:eqan8k$lts$[email protected]..
> Help!!!
>
> I'm having a problems getting a site to work in IE7. It
works fine in
> Firefox, but in IE7, not a chance.
>
> Here's the
http://www.kunger.com/Calibre
>
> Once in the site, go to the Gallery. Click on any of the
two thumbnails
> on
> the left. A window will open with a short blurb and a
choice of 2 or 3
> links.
> Select the slideshow. The slideshow will load up and
start fine. Close
> the
> window and click the other thumbnail. It won't load up
(To be clear
> here,
> both the thumbnails have an "on release" javascript in
them), Nothing!
> Click
> on any of the other links on the top... About, Contact,
etc. They won't
> load
> up either. As a matter of fact, you won't even be able
to refresh the
> page.
> This does't happen in FireFox. It works beautifully
there, just as it
> should.
>
> Is there a fix for this IE7 Problem? Is it a simple
JavaScript that I
> need?
>
> Any help is greatly appreciated.
>
> Kevin
> -
http://crossmills.org/misc/CS3/cs3_test_2c.html
The above page looks good in FireFox2 but a horror show in
IE7: styling missing from header, footer and central column;
central column alignment out of wack with relation to left nav and
too close to footer.
Is the problem mine or IE's? Either way, what do I have to do
to fix it?
Using WindowsXP.
Thanks.The problem is with the way you are defining and naming your
custom tags. Check out these 2 MSDN articles regarding how to give
names to custom HTML tags:
http://msdn.microsoft.com/msdnmag/issues/0500/cutting/
http://msdn2.microsoft.com/en-us/library/ms531076.aspx -
I'm having a problem with a floating footer in IE7. It will not stay at the bottom of the page in IE7, but sits in the middle of my last photo. It does exactly what it should in all other browsers I've tested it on, on both Mac and PC. I'm new to CSS, and I've spent all day trying solutions on various forums, but with no luck. I'm sure it's an easy fix, probably having to do with clearing floats (maybe?), but I have no idea what else to try and I'm losing my patience! I have a test page up here: http://www.mearesdentistry.com/test/ourteam. If anyone could help it would be greatly appreciated. Thank you in advance!
HTML errors:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.mearesdentistry.com%2Ftest%2F ourteam
CSS errors:
http://jigsaw.w3.org/css-validator/validator?profile=css21&warning=0&uri=http%3A%2F%2Fwww. mearesdentistry.com%2Ftest%2Fourteam
98% of browser rendering issues are code related. Clean code = fewer things to rule out.
Remove the CSS height property from your #container and #welcome divisions.
Explicit height values on containers restricts how much content they can hold. Page height must remain flexible.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Hi Gurus,
I've developed small Application in the NWDS (2004s).
I'm using in IE7.0,when i open the Portal using IE7.0 Everything works fine ,but
When i go to Content Administration-->Portal Content, to create a new folder for placing the IVIEWs,Pages,Work Sets and Roles,
When i right click on the Portal content i'm getting the Browser Options, not the EP Options.
Previously when i was using the IE6.0, i didn' get these problems.
Is there any settings to do in IE7.0 to display the EP Options when i right click on the Portal Content Folder?
Thanks in Advance.
Regards,
Adi.Hi,
Microsoft IE 7 browser version will be supported starting with following Web Dynpro support packages:
NetWeaver04, SPS19
NetWeaver04s, SP10
You can go for upgrade to workable version or apply the workaround given in the Note 991449 - Web Dynpro and Microsoft Internet Explorer Version 7.0
Hope this helps !
Regards
Srinivasan T -
Removing Business Contact Manager BCM from my Lenovo IdeaCentre K210
I am trying to load Office 2003 on my K210. It appears the pre-loaded trial version of Office 2007 is causing a conflict... "BCM Office Addin - Office Application Version does not match". My research says i should uninstall the Business Contact Manager (BCM). I am trying to uninstall BCM but need more help... I already uninstalled the pre-loaded trial version of Office 2007. Any help would be appreciated.
Besides that, I use CardFila.com to collect all business cards on iPhone. You can do this on Android, computer, laptop.
So easy to collect, find and use any contact at any time.
You can access the contacts everywhere without Internet connection by using CardFila for Mobile (iPhone or Android phones). If you like, you can try it on -
I embedded the code onto a website, and I get the following
error
"Could not access file. The file may have been deleted by the
owner or you do not have permission to access it."
The problem is that this error only happens on IE, I have
tried accessing the same website from multiple computers using
FireFox, and it loads just fine.
All the computers in which this error has been happening have
been updated with the latest Flash revision (9,0,124,0).
What could be causing the problem?
Thanks,
Noshiok, nevermind, for some reason, it stopped working after a
while.
I still don't understand what might be causing it, I can see
it in other browsers (Firefox, Opera and Safari) but I still can't
see it on Internet Explorer.
Is there some bug? has there been anybody else also
complaining about this problem?
Thanks for your help! -
IdeaCentre K210-Soyo Monitor and Display Adapter
Hi I have a Soyo Monitor -Dylmo17b. I just received an update and my graphics driver got changed to Intel G33/G31 Express Chipset Family. But ever since Soyo went bankrupt I don't have a driver for the monitor and there's a driver for it but its generic.. My viewing on my videos even general viewings colors aren't vivid almost like a matte view. Is there something I can do about it. Any suggestions out there please.
Computer Specs- Operating Sys Vista
Intel celeron-cpu E1200 @1.60Ghz
Memory 2.gb
32 bit operating systemYou will not fry or overcharge the battery. Mac OSX prevents that from happening. Keep it plugged in without worry.
Ciao. -
K210 Vista Home Premium not booting after latest Vista Update.
This is my pc specs:
Lenovo IdeaCentre K210 Intel Desktop PC - Intel Celeron Dual Core E1200 1.6GHz, 2GB DDR2, 320GB SATA II, DVDRW, Intel GMA3100, Webcam, Veriface, Flash Reader, Vista Home Premium SP1
After the latest windows update on February 12th, 2009. I woke up to my pc error beeping continously at the prompt before windows should boot up.
I have only had this lenovo pc for 5 months and it was working perfectly fine before this update. Onekey recovery is not working. I cannot get it to boot from a dvd or cd. I tried a recovery disc, did not work. I changed the pc to boot from the dvd and that did not work.
If I have it boot normally I get the continous error beeping.
The fact that I am writing this from my 6 year old HP computer makes me rethink my recent purchase of the Lenovo brand.Phantera wrote:
After the latest windows update on February 12th, 2009. I woke up to my pc error beeping continously at the prompt before windows should boot up.
If you think a windows update caused the problem; are you able to say which update caused the problem?
You could also describe the beep error more precisely before it boots into windows. Or is windows not working at all in normal or safe mode?
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Spry drop down menu not showing in IE7
I'm using Dreamweaver CS5, Windows 7 64bit OS, and tested in IE8 or newer and firefox all working perfectly. (with the exception of IE7).
the problem can be viewed at www.maxdailydeal.com
the drop down sub-menu are not displaying on IE7, can anyone help please.
Many thanks in advance!
-max-All throughout this forum we explain that you should stay away from absolute and relative positioned elements. Again I shall say STAY AWAY FROM ABSOLUTE AND RELATIVE POSITIONED ELEMENTS.
To illustrate this, remove id="floatdiv" from the menu container and you shall see that the menu works. OK, the menu may not look like you want it to, but this can easily be fixed with proper CSS.
Gramps -
WRT54G v6 firmware upgrade under Vista problem
I'm not sure if this is related to Vista or not.
I downloaded the correct firmware version for WRT54G v6 and selected upgrade using the web interface. After a few minutes, the browser directed me to a site with the following URL
http://192.168.1.1/upgrade.tri
My IE7 had problem displaying this page and the Power LED on the router kept blinking. I tried to connect to the web interface and it was still showing Firmware Version: v1.00.9
I don't think there is anything wrong with what I did and not sure if the upgrade was successful. Any suggestions?I had the same problem. I found the solution here http://www.scorpiontek.org/portal/content/view/27/36/1/3/:
This could be because you are accessing the router over HTTPS. You cannot upload firmware or settings to a WRT54G v5 over a HTTPS connection unless you have Linksys firmware v1.00.9 or later. Try accessing it using just plain HTTP.
Enabling and using http instead of https worked for me. No need to reset or reconfigure.
I upgraded from 1.00.1 (IIRC) to 1.02.2. -
ITune does not open after installing IE7
I have recently installed Internet Explorer 7 on my Window XP (with service pack 2). This causes me problem in opening iTune right now. After removing IE7, then restart the computer and reinstall iTune, I still cannot open iTune.
Does anyone aware of this problem? Any suggestion as in how I can iTune running again. I have all songs organized in iTune and I have just used for long time. I want it to run again.
Please help!!!
ThanksHi, Denise.
There are no particular problems iTunes has running with IE7 - no problems I have or I have heard of - so let's try to get an idea of what might be going on with some preliminary questions from b noir's "smack" for iTunes fails to launch situations:
Is there an error message associated with the launch failure?
If so, what does it say and what (if any) error numbers are there?
If there's not an error mesage, let's check your QuickTime (its well-being is a prerequisite to a functioning iTunes).
Go to the XP Start menu > All Programs and try running QuickTime.
Does it start?
If not, then the same question as for iTunes - is there an error message?
If so, what does it say and what (if any) error numbers are there?
Do you notice any other peculiar behavior with QuickTime?
Message was edited by: The Mimico Kid
Maybe you are looking for
-
My Time Capsule does not work with existing WiFi
Following a question solved on March 24 by LaPastenague, but gone bad again. Apple AirPort Time Capsule I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years
-
Sender File Adapter is not reading anything
Hi, I have a really strange problem here. I'm tyring to read a file using file adapter (FTP) and the adapter doesn't read anything and it does not throw any error in the communication channel monitoring. I'm using a receiver file adapter to write fil
-
Report Display in unknown Language
Hi there i have developed report and has placed it in EBS now When ever i run the the report It Shows output in unknown language rather than English thanx
-
When i watch video on different sites, it always stoped, but i hear sound, the video continue only when i move mouse, what is the problem?
-
I'm trying to get my MS Outlook 2007 to work and keep coming up with errors. When I test my Account Settings the first message I get is: Log onto incoming mail server (POP3): Outlook cannot connect to your incoming (POP3) ema