Ie7 problem " Exception Caught while loading corporate.xml: [Object Error]

I am working with spry in dreamweaver cs3. My xml file is as
simple as follows:
<?xml version="1.0" encoding="utf-8"?>
<corporate>
<item>
<item_menu>Welcome letter</item_menu>
<menu_content><![CDATA[<p>Welcome content
goes here<p>]]></menu_content>
</item>
</corporate>
I add a dataset contain this xml file to an html page using
the CS3 "insert dataset command". Once I add the dataset to the
page, IE7 can not load the corporate.xml. The corporate.xml is on
available in the right folder. This problem does not occur in
Fireforx, but it occurs in IE7. I need help. Thanks

Similar Messages

Spry = Exception caught while loading data.xml [object Error]

Exception caught while loading data.xml [object Error]
I get this mistake message then I look in the Browser to my
create html page with put in the xml file by Spry. All my xml files
are not shows, its shows only the error massage.
What can I do for the repair it?
Thanks in advance for you answer and regards.

Hi Jay,
While in theory it should work offline, you have run into
the main issue.
IE7 has a security limitation that prevents the ActiveX
control that does the XMLHttpRequest from working from the local
file system.
Without being about to control the viewing environment, you
can't guarantee it will work in all instances.
It will work if running off a web server (
http://localhost or otherwise).
I wouldn't recommend it for offline use unless you can
control the usage.
Let me know if you have further questions.
Thanks,
Donald Booth
Adobe Spry Team

Exception caught while loading clients.xml: [object Error] in IE

I’m following lesson 9 from Adobe Dreamweaver CS3
Classroom in a Book which starts with viewing in a browser the
final web page provided on the CD that comes with the book.
The problem is that when I browse that file, IE 7 gives this
error:
quote:
Exception caught while loading clients.xml: [object Error]
Other browsers and versions of IE display the
page fine.
From Dreamweaver I ran Browser Compatibility check and it
reported this:
quote:
Found 1 errors in external css files
Affects: Firefox 1.5; Internet Explorer 6.0, 7.0; Netscape
8.0; Opera 8.0, 9.0
Found 2 errors in external css files
Affects: Internet Explorer for Macintosh 5.2
Found 3 errors in external css files
Affects: Safari 2.0
All errors point to this code from the same
line:
href="css/main.css
and the whole line is:
<link href="css/main.css" rel="stylesheet" type="text/css"
media="screen" />
I also ran validation of the file and it reported this:
quote:
2 The tag: "html" doesn't have an attribute: "xmlns:spry" in
currently active versions.[XHTML 1.0 transitional]
114 The tag: "div" doesn't have an attribute: "spry:region"
in currently active versions.[XHTML 1.0 transitional]
117 The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
118 The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:setrow" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:select" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:repeat" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:odd" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:hover" in
currently active versions.[XHTML 1.0 transitional]
128 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
129 The tag: "div" doesn't have an attribute: "tabindex" in
currently active versions.[XHTML 1.0 transitional]
134 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
143 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
The problem is that I don’t know what to do next and if
and how this file can be fixed.
Will appreciate greatly your help
Thank you

Another bump
hoping the experts here might help if they check the files, I
uploaded the project on a public site. You can download it from
here:
http://savefile.com/files/1452147
at he bottom of the page click Download and on the next page
at the bottom click Download file now
These are the troubleshooting steps and solutions I
attempted.
After I ran check Browser Compatibility it showed problems
located in main.css file
I opened main.css and ran Browser Compatibility there too.
The problems were listed as the following:
Error Unsupported property: content
Internet Explorer 6.0, 7.0; Internet Explorer for Macintosh
5.2
line 75 .clearfix:after { content: "."; display: block;
height: 0; clear: both; visibility: hidden; }
Error Unsupported property: zoom
Firefox 1.5; Internet Explorer for Macintosh 5.2; Netscape
8.0; Opera 8.0, 9.0; Safari 2.0
line 82 .clearfix { zoom: 1; }
Error Unsupported value: 'hand'
Safari 2.0
line 150 .hoverRow, .selectRow{ background-color: #FFFF00;
cursor: pointer; cursor: hand; }
also lines 157
Warning Unsupported value: 'hand'
Firefox 1.5; Internet Explorer 6.0, 7.0; Internet Explorer
for Macintosh 5.2; Netscape 8.0
line 150 .hoverRow, .selectRow{ background-color: #FFFF00;
cursor: pointer; cursor: hand; }
also lines 157
I deleted unsupported properties and changed the unsupported
value of hand to default and saved the main.css.
Unfortunately IE still couldn't render the page showing the
same error.
I searched the CSS Advisor web site and even entire Google
but except a few people reporting the same error no solution was
posted.
I also tied to contact the publisher of the book but I didn't
get any replies with solutions yet.
Since this is a learning project I'm trying to prepare myself
for real live scenarios and wonder what experienced users would do
when facing a similar problem if the project was for a client. What
would you do. What is an acceptable practice? If you can't find a
solution what would you say to your clients "well IE 7 can't render
certain things from your page and there is nothing I can do about
it"?
I'll appreciate any input

Exception caught while loading slideshow.xml "object error

Got this error after making a slide show in Fireworks,
bringing it into dreamweaver cs3. Works great in firefox, but of
course i get this error trying it on a pc with IE7. Any ideas?
<AlbumBook ver='1.5' title='' description=''
firstAlbum='0' width='459' height='362' showThumbnails='true'
thumbWidth='80' thumbHeight='60' autoStart='false'
allowClick='false' clickAction='_blank' playerName='Player - Black
(SPRY/HTML)'>
<Album title='super striper tips' description=''
path='super striper tips' hasThumb='false' thumbSrc=''
hasBg='false' bgSrc='' bgScale='0' interval='5'
useTransition='true' transType='Fade' transTime='2' firstImage='0'
dispSequence='0'>
<Slide src='sshandsver4l_01.jpg' caption='' width='459'
height='362' thumbWidth='77' thumbHeight='60'/>
<Slide src='sshandsver4l_02.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_03.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_04.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_05.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_06.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_07.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_08.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_09.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_10.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_11.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_12.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_13.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_14.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_15.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_16.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_17.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_18.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
<Slide src='sshandsver4l_19.jpg' caption='' width='459'
height='362' thumbWidth='76' thumbHeight='60'/>
</Album>
</AlbumBook>

post a link to the gallery.
h

Exception caught while loading events.xml: Accès refusé.

I receive this message "Exception caught while loading
events.xml: Accès refusé (access denied)" when i try to
launch a file including a "Spry.Data.XMLDataSet", even with the
last sample files of Adobe Labs (ex : b_06_spry_widgets.html in
"vid0167" folder).
I saw there was 0 reply to the same kind of topic in the
forum.
Is there a truly solution ?
Best regards
Philippe

Hello Yveline,
The problem appears because you try to load an XML from a
different server than the server of your HTML origin. This is one
of the browser's JavaScript security model. You'll have to put the
XML file to be used by the Spry XML DataSet on the server as the
HTML file.
The only solution that allow you to call a file from a
different server is to create an XML proxy on your server so the JS
to be allowed to make the server call. The proxy gateway either
written in a server side scripting like CF, PHP or ASP or using a
dedicated proxy server application will get the file from the
external server and will make it appear to the browser as living on
your server.
Cristian

Exception caught while loading menus.xml: TypeError: Access is denied. (IE), WORKS IN Firefox

hi iam trying to get the data into spry table(Dr-cs3) from xml file and iam using spry xml dataset. my application is working in every browser except in IE.
ERROR IS :
Exception caught while loading menus.xml: TypeError: Access is denied.

Hi
this error is because of spryData.js, spryXapth.js generated by Dr CS3, I used Dr CS4 generated javascript files, then the same application is working.

Error upon starting Weblogic server : Exception thrown while loading uddi

Hi,
I am getting $Proxy41.getDefaultWebApp(Unknown Source) error while starting the weblogic. Any one has clue? Below is the stack from myserv.log file.
Environment:
OS : Windows 2000 server
WLS: Weblogic 7.0SP2
Oracle client : Oracle 9i RC2
IIS : IIS 5.0
<Exception thrown while loading uddi: java.lang.ClassCastException: weblogic.management.configuration.ApplicationManagerMBean_CachingStub>
java.lang.ClassCastException: weblogic.management.configuration.ApplicationManagerMBean_CachingStub
     at $Proxy41.getDefaultWebApp(Unknown Source)
     at weblogic.management.configuration.WebServerMBean_CachingStub.getDefaultWebApp(WebServerMBean_CachingStub.java:226)
     at weblogic.servlet.internal.WebAppServletContext.initFromMBean(WebAppServletContext.java:1312)
     at weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.java:1054)
     at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:1009)
     at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:502)
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:371)
     at weblogic.j2ee.J2EEApplicationContainer.prepareWebModule(J2EEApplicationContainer.java:1598)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:735)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:555)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:458)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareAllStagedApplications(SlaveDeployer.java:490)
     at weblogic.management.deploy.slave.SlaveDeployer.initialize(SlaveDeployer.java:253)
     at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.initialize(DeploymentManagerServerLifeCycleImpl.java:150)
     at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
     at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
     at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
     at weblogic.Server.main(Server.java:32)
####<Dec 14, 2005 11:19:54 AM PST> <Error> <Deployer> <rsecav-webenam> <myserver> <main> <kernel identity> <> <149205> <The Slave Deployer failed to initialize the application uddi due to error weblogic.management.ApplicationException: Prepare failed. Task Id = null
Module Name: uddi, Error: Could not load uddi: java.lang.ClassCastException: weblogic.management.configuration.ApplicationManagerMBean_CachingStub
}.>
weblogic.management.ApplicationException: Prepare failed. Task Id = null
Module Name: uddi, Error: Could not load uddi: java.lang.ClassCastException: weblogic.management.configuration.ApplicationManagerMBean_CachingStub
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:744)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:555)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:458)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareAllStagedApplications(SlaveDeployer.java:490)
     at weblogic.management.deploy.slave.SlaveDeployer.initialize(SlaveDeployer.java:253)
     at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.initialize(DeploymentManagerServerLifeCycleImpl.java:150)
     at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
     at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
     at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
     at weblogic.Server.main(Server.java:32)
Thanks in advance,
Manu

Hi Manu,
can I know how you over come this problem? I am using Weblogic 7 with Service Pack 4. I will be thankful to u if you can mail ur response to me on my mail [email protected]
Thanks and Regards,
Suresh Vemulapalli

Sidecar.xml not uploading 'an error has occurred while loading sidecar.xml. Sidecar.xml is invald'

Hi all,
If anyone could throw some light as to why im receiving this error it would be hugely appreciated
'an error has occurred while loading sidecar.xml.
Sidecar.xml is invalid. Error #1090'
i've used this method for filling in all the fidly bits and ordering the folios for about a year now and never had any issues with it.. until i was about to publish our issue yesterday.... and of course a problem had to crop up..
I did update to the latest mandatory folio builder version, i wonder if this is the problem?
i have tried all the seeminly obvious solutions, logging in an out of the folio builder, resaving teh .xml file , restarting the computer. swearing.. none of them worked.. :S
Anyways thanks in advance

For the benefit of others searching for on this issue in the future, the problem was with the sidecar.xml document. One of the tags elements had an extra "<" in it, which resulted in the XML being malformed.
Neil

Exception thrown while reading an XML file using Properties

Exception thrown while reading an XML file using Properties.
Exception in thread "main" java.util.InvalidPropertiesFormatException: org.xml.sax.SAXParseException:
The processing instruction target matching "[xX][mM][lL]" is not allowed.
at java.util.XMLUtils.load(Unknown Source)
<?xml version="1.0"?>
<Config>
     <Database>
          <Product>FX.O</Product>
          <URL>jdbc:oracle:thin:@0.0.0.0:ABC</URL>
     </Database>
</Config>Am I missing anything?

Thanks a lot for all yr help.I have got the basics of
the DTD
However,when I say thus
<!DOCTYPE Config SYSTEM "c:/PartyConfig">
?xml version="1.0"?>
<Config>
     <Database>
          <Product>FX</Product>
          <URL>jdbc:oracle:thin:@0.0.0.0:ABC</URL>
     </Database>
</Config>I get the error
Invalid system identifier: file:///c:/ParyConfig.dtd
Please advise?for goodness sake, how many times do I have to tell you that you can't just expect the Properties class to accept arbitrary XML in any format? it reads XML in the format I linked to, and nothing else. Properties is not a general purpose XML binding. you can't do what you're trying to do with it. read this and in particular pay attention to the following
The XML document must have the following DOCTYPE declaration:
<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
Furthermore, the document must satisfy the properties DTD described above.
you are not reading my answers properly, are you? kindly do so

Install on AIX 6.1 SP3: Exception thrown while loading wl_management_internal1

Hello,
I have the following exception when running WLS 6.1 SP 3 on AIX 4.3.3, any idea?
<Exception thrown while loading wl_management_internal1:
java.lang.NullPointerException
java.lang.NullPointerException
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:158)
at $Proxy64.getJ2EEApplicationDescriptor(Unknown Source)
at weblogic.j2ee.Application.getAppDescriptor(Application.java(Compiled
Code))
at weblogic.j2ee.Component.getModuleMBean(Component.java(Compiled
Code))
at weblogic.j2ee.Component.getAltDDFile(Component.java(Compiled Code))
at
weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java(Compiled
Code))
at
weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java(Compiled Code))
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java(Compiled
Code))
at weblogic.j2ee.Application.addComponent(Application.java:170)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:360)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:150)
at
weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:76)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java(Compiled
Code))
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java(Compiled
Code))
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:360)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java(Compiled Code))
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy24.addWebDeployment(Unknown Source)
at
weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeployment(WebServerMBean_CachingStub.java:1202)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:346)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:150)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java(Compiled
Code))
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java(Compiled
Code))
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:360)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:305)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:274)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

Were you installing SP3 or starting WLS after the install?
What do you see when you run:
$ which java
$ java -version
Does the OS have patch 9 -- I believe it's PTF 9 in AIX lingo.
AIX 4.3.3.9
Wayne Scott
Thierry wrote:
Hello,
I have the following exception when running WLS 6.1 SP 3 on AIX 4.3.3, any idea?
<Exception thrown while loading wl_management_internal1:
java.lang.NullPointerException
java.lang.NullPointerException
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:158)
at $Proxy64.getJ2EEApplicationDescriptor(Unknown Source)
at weblogic.j2ee.Application.getAppDescriptor(Application.java(Compiled
Code))
at weblogic.j2ee.Component.getModuleMBean(Component.java(Compiled
Code))
at weblogic.j2ee.Component.getAltDDFile(Component.java(Compiled Code))
at
weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java(Compiled
Code))
at
weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java(Compiled Code))
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java(Compiled
Code))
at weblogic.j2ee.Application.addComponent(Application.java:170)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:360)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:150)
at
weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:76)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java(Compiled
Code))
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java(Compiled
Code))
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:360)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java(Compiled Code))
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy24.addWebDeployment(Unknown Source)
at
weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeployment(WebServerMBean_CachingStub.java:1202)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:346)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:150)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java(Compiled
Code))
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java(Compiled
Code))
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:360)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:305)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:274)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

Exception occurred while loading _WL_TIMESTAMP FILE

Hi all,
I have an application packaged in a EAR file, but when I deploy through the Weblogic Server Administration console, i get a strange error:
<Error> <EJB> <BEA-010003> <Exception occurred while loading WLTIMESTAMP FILE.
java.io.FileNotFoundException: /opt/bea/domains/bpm/servers/BPMServer/cache/EJBCompilerCache/1bscgreimm37w/_WL_GENERATED (Too many open files)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.(FileInputStream.java:106)
at weblogic.ejb.container.deployer.EJBDeployer.getFileHash(EJBDeployer.java:464)
at weblogic.ejb.container.deployer.EJBDeployer.compileIfNecessary(EJBDeployer.java:586)
at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:1154)
Truncated. see log file for complete stacktrace
>
java.lang.NullPointerException
at weblogic.utils.FileUtils.remove(FileUtils.java:274)
Searching over the Oracle/BEA documentation i found this :
BEA-010003 Error: Exception occurred while loading WLTIMESTAMP FILE.
Description Exception occurred while loading WLTIMESTAMP FILE. Forcing recompilation: ioException
Cause The container generates WLGENERATED file, which stores the server version of the appc compiler. if the current server version is different from the version specified in WLGENERATED file, appc recompiles the beans. There was an error reading this file.
Action The container will automatically recompile the beans.
But if the container compiles the beans again, why in the deployments view, it doesn't work, and the application is never at Active state?
Any help is appreciated!
Thiago

Looking at your stack trace, I don't believe the issue is directly related to the WLTIMESTAMP file but rather it looks like you have hit the limit on the number of open file descriptors for your process (note that the stack trace says "Too many open files" immediately after reporting what file it failed to open). Looks like you either have an FD leak or your OS/shell limit on the number of open file descriptors allowed per process may be set too low for what you are trying to accomplish.

Exception caught while trying to initialize Oracle RouteServer

Hi,
While starting my application server, i am facing this error.
05/09/02 14:32:53 Exception caught while trying to initialize Oracle RouteServer
05/09/02 14:32:53 oracle.spatial.router.engine.RoutingEngineException: [REE-0126: Node reference for start node 42788087 of
edge -23202655 is missing in partition 0]
05/09/02 14:32:53 at oracle.spatial.router.engine.Partition.fillNonBoundaryEdgesWithNodeReferences(Partition.java:183)
05/09/02 14:32:53 at oracle.spatial.router.engine.Partition.readPartition(Partition.java:110)
05/09/02 14:32:53 at oracle.spatial.router.engine.PartitionCache.loadPartitionFromDatabase(PartitionCache.java:276)
05/09/02 14:32:53 at oracle.spatial.router.engine.PartitionCache.obtainPartitionReference(PartitionCache.java:234)
05/09/02 14:32:53 at oracle.spatial.router.engine.Network.<init>(Network.java:62)
05/09/02 14:32:53 at oracle.spatial.router.server.RouteServerImplementation.<init>(RouteServerImplementation.java:128)
05/09/02 14:32:53 at oracle.spatial.router.server.RouteServerServlet.init(RouteServerServlet.java:191)
05/09/02 14:32:53 at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2094)
05/09/02 14:32:53 at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4523)
05/09/02 14:32:53 at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4617)
05/09/02 14:32:53 at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:765)
05/09/02 14:32:53 at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:497)
05/09/02 14:32:53 at com.evermind.server.Application.getHttpApplication(Application.java:886)
05/09/02 14:32:53 at com.evermind.server.http.HttpServer.getHttpApplication(HttpServer.java:688)
05/09/02 14:32:53 at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:570)
05/09/02 14:32:53 at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:263)
05/09/02 14:32:53 at com.evermind.server.http.HttpServer.setSites(HttpServer.java:259)
05/09/02 14:32:53 at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:160)
05/09/02 14:32:53 at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2325)
05/09/02 14:32:53 at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1498)
05/09/02 14:32:53 at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:93)
05/09/02 14:32:53 at java.lang.Thread.run(Thread.java:534)
Can you suggest something on this..!
Thanks and Regards
Ashish Dhawan

Hi,
Please refer to the answers for your questions:
Q) I assume you imported this data, what tables did you import? Was it non-Router schema data that was massaged into the Routers schema? Was is it limited data from another Router schema (NODE, EDGE and SIGN_POST tables)? How was the data exported/imported? Could you run the following query and post the result?
Ans:) The data had been downloaded from the
http://www.adci.com/products/navteq/index.html.
This was a sample oracle 10g data of "pinellas-county"
Import statments used were:
1. Create User that will "house" the Spatial data. Should be the same name as the user being exported.
     CREATE USER ADCI PROFILE "DEFAULT"
     IDENTIFIED BY "ADCI" DEFAULT TABLESPACE "USERS"
     TEMPORARY TABLESPACE "TEMP"
     ACCOUNT UNLOCK;
     GRANT "CONNECT" TO "ADCI";
GRANT imp_full_database, create table, create sequence TO ADCI;
2. Create directory for import (The directory will be the location of the dump file)
     CREATE DIRECTORY adci_dump_dir AS '<location of dump file>';
     GRANT READ, WRITE ON DIRECTORY adci_dump_dir TO adci;
     ALTER USER adci QUOTA UNLIMITED ON USERS;
3. Import Tablespace by running the following command. (Modify the datafile location)
     ** Note - You may need to convert the endian format before importing the datafile.
     (The source datafile is from platform id #10 - See below)
     impdp adci@<database alias> DIRECTORY=adci_dump_dir DUMPFILE=tts.dmp TRANSPORT_DATAFILES='<directory location>\adci_data.ora'
     ** Ignore ORA-31684 Errors on MDSYS objects
     Oracle10g Release 1 note:
     Oracle 10g Release 1 may report several errors when importing the transportable tables. These errors can be safely ignored. There are two types of errors:
     ORA-31684: Object type TYPE:"MDSYS"."XXXXX" already exists
     ORA-39083: Object type TYPE failed to create with error:
     ORA-02311: cannot alter with COMPILE option a valid type with type or table dependents
     Failing sql is:
     ALTER TYPE "MDSYS"."XXXXX" COMPILE SPECIFICATION
     and:
     ORA-31684: Object type TYPE_BODY:"MDSYS"."SDO_GEOMETRY" already exists
     At the end of the import, the message will be:
     Job "MAPPER"."SYS_IMPORT_TRANSPORTABLE_01" completed with 11 error(s)
4. Alter tablespace to be in read write mode.
     ALTER TABLESPACE ADCI_DATA READ WRITE;
5. Grant unlimited quota on transportable tablespace to user created in step 1
     ALTER USER ADCI QUOTA UNLIMITED ON ADCI_DATA;
6. Initialize Spatial Indexes as owner of all spatial indexes
     EXEC SDO_UTIL.INITIALIZE_INDEXES_FOR_TTS
7. Run the following script to build indexes, add metadata
     CONNECT ADCI@<ALIAS NAME>
     INSERT INTO USER_SDO_MAPS SELECT * FROM SDO_MAPS;
     INSERT INTO USER_SDO_THEMES SELECT * FROM SDO_THEMES;
     INSERT INTO USER_SDO_STYLES SELECT * FROM SDO_STYLES;
     COMMIT;
8. Collect Schema statistics
     Run following command while connected as a priviledged user.
     exec dbms_stats.gather_schema_stats(ownname=>'ADCI',cascade=>TRUE,estimate_percent=>15);
Q) select index_name from USER_INDEXES where table_name='EDGE';
Ans:)
INDEX_NAME
EDGE_NAME_IDX
START_NODE_ID_IDX
END_NODE_ID_IDX
EDGE_ID_IDX
EDGE_SIN
SYS_IL0000095839C00014$$
SYS_IL0000095839C00015$$
Step>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Drop tables:
drop table EDGE_PART; Table Dropped
drop table NODE_PART; Table Dropped
drop table PARTITION; Table Dropped
drop table NEW_PARTITION; Table doesnot exist
Step>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If the delete works, great. If the delete doesn't work drop all of the Router shema tables, reimport the data and try the above delete command again.
Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
Processing object type TRANSPORTABLE_EXPORT/TYPE/TYPE_SPEC
ORA-31684: Object type TYPE:"MDSYS"."NUM_ARRAY" already exists
ORA-31684: Object type TYPE:"MDSYS"."SDO_ORDINATE_ARRAY" already exists
ORA-39083: Object type TYPE failed to create with error:
ORA-02311: cannot alter with COMPILE option a valid type with type or table dependents
Failing sql is:
ALTER TYPE "MDSYS"."SDO_ORDINATE_ARRAY" COMPILE SPECIFICATION PLSQL_OPTIMIZE_LEVEL= 2 PLSQ
L_CODE_TYPE= INTERPRETED PLSQL_DEBUG= FALSE
ORA-31684: Object type TYPE:"MDSYS"."SDO_ELEM_INFO_ARRAY" already exists
ORA-39083: Object type TYPE failed to create with error:
ORA-02311: cannot alter with COMPILE option a valid type with type or table dependents
Failing sql is:
ALTER TYPE "MDSYS"."SDO_ELEM_INFO_ARRAY" COMPILE SPECIFICATION PLSQL_OPTIMIZE_LEVEL= 2 PLS
QL_CODE_TYPE= INTERPRETED PLSQL_DEBUG= FALSE
ORA-31684: Object type TYPE:"MDSYS"."SDO_POINT_TYPE" already exists
ORA-39083: Object type TYPE failed to create with error:
ORA-02311: cannot alter with COMPILE option a valid type with type or table dependents
Failing sql is:
ALTER TYPE "MDSYS"."SDO_POINT_TYPE" COMPILE SPECIFICATION PLSQL_OPTIMIZE_LEVEL= 2 PLSQL_CO
DE_TYPE= INTERPRETED PLSQL_DEBUG= FALSE
ORA-31684: Object type TYPE:"MDSYS"."SDO_KEYWORDARRAY" already exists
ORA-31684: Object type TYPE:"MDSYS"."SDO_GEOMETRY" already exists
ORA-39083: Object type TYPE failed to create with error:
ORA-02311: cannot alter with COMPILE option a valid type with type or table dependents
Failing sql is:
ALTER TYPE "MDSYS"."SDO_GEOMETRY" COMPILE SPECIFICATION PLSQL_OPTIMIZE_LEVEL= 2 PLSQL_CODE
TYPE= INTERPRETED    PLSQLDEBUG= FALSE
Processing object type TRANSPORTABLE_EXPORT/TYPE/GRANT/OBJECT_GRANT
Processing object type TRANSPORTABLE_EXPORT/TYPE/TYPE_BODY
ORA-31684: Object type TYPE_BODY:"MDSYS"."SDO_GEOMETRY" already exists
Processing object type TRANSPORTABLE_EXPORT/TABLE
Processing object type TRANSPORTABLE_EXPORT/INDEX
Processing object type TRANSPORTABLE_EXPORT/INDEX_STATISTICS
Processing object type TRANSPORTABLE_EXPORT/TABLE_STATISTICS
Processing object type TRANSPORTABLE_EXPORT/DOMAIN_INDEX/TABLE
Processing object type TRANSPORTABLE_EXPORT/DOMAIN_INDEX/INDEX
Processing object type TRANSPORTABLE_EXPORT/TTE_POSTINST/PLUGTS_BLK
Job "ADCI"."SYS_IMPORT_TRANSPORTABLE_01" completed with 11 error(s) at 12:11
As the data already exists in MDSYS user for the same data, thus these errors have started cropping up. What do you suggest..Now i think the data has crashed completely. What do you suggest...??
Thanks and Regards
Ashish Dhawan

JSPG0227E: Exception caught while translating /index.jsp: /index.jsp(12,2)

While i am creating label in JSF i am getting the following error.
JSPG0227E: Exception caught while translating /index.jsp: /index.jsp(12,2) --> JSPG0006E: Custom Tag is missing required attribute for
Please help me.
Thanks in Advance.

Add the for attribute to the custom tag.

Error while loading an XML document using a structured application

Hi,
I try to load an XML document using a structured application defined in the default structapps.fm
My code is shown down, extracted from the FDK API code sample.
Problem, I always have the same message :
"Cannot find the file named e:\xml\AdobeFrameMaker10\file. Make sure that the file exists. "
Where "e:\xml\AdobeFrameMaker10\" is my install directory.
So I assume that frame try to find the structapps.fm file but does not find it.
What else can it be ?
Does anyone knowns how to achieve this simple task using extendScript ?
Thanks for any comments, Pierre
function openXMLFile(myLastFile) {
    var filename = myLastFile.openDlg("Choose XML file ...", "*.xml", false);
    if (filename != null) {
        /* Get default open properties. Return if it can’t be allocated. */
        var params = GetOpenDefaultParams();
        /* Set properties to open an XML document*/
        /*Specify XML as file type to open*/
        var i = GetPropIndex(params, Constants.FS_OpenAsType)
        params[i].propVal.ival = Constants.FV_TYPE_XML;
        /* Specify the XML application to be used when opening the document.*/
        i = GetPropIndex(params, Constants.FS_StructuredOpenApplication)
        params[i].propVal.sval = "myApp";
        i = GetPropIndex(params, Constants.FS_FileIsOldVersion)
        params[i].propVal.ival = Constants.FV_DoOK
        i = GetPropIndex(params, Constants.FS_FontNotFoundInDoc)
        params[i].propVal.ival = Constants.FV_DoOK
        i = GetPropIndex(params, Constants.FS_FileIsInUse)
        params[i].propVal.ival = Constants.FV_DoCancel
        i = GetPropIndex(params, Constants.FS_AlertUserAboutFailure)
        params[i].propVal.ival = Constants.FV_DoCancel
        /*The structapps.fm file containing the specified application must have
        already been read. The default structapps.fm file is read when FrameMaker is
        opened so this shouldn't be a problem if the application to be used is
        listed in the structapps.fm file.*/
        var retParm = new PropVals()
        var fileObj = Open(filename, params, retParm);
        return fileObj
    } else {
        return null;

Pierre,
Depending on the object "myLastFile", the method openDlg might not even exist (if the myLastFile object is not a File object, for instance). And I do not see any need for the myLastFile anyhow, as you are presenting a dialog to select a file to open. I recommend using the global ChooseFile( ) method instead. This will give you a filename as string in full path notation, or null when no file was selected in the dialog. I am not sure what your ExtendScript documentation states about the return value for ChooseFile, but if that differs from what I am telling you here, the documentation is wrong. So, if you replace the first lines of your code with the following it should work:
function openXMLFile ( ) {
    var filename = ChooseFile ( "Choose XML file ...", "", "*.xml", Constants.FV_ChooseSelect );
While writing this, I see that Russ has already given you the same advice. Use the symbolic constant value I indicated to use the ChooseFile dialog to select a single file (it can also be used to select a directory or open a file - but you want to control the opening process yourself). Note that this method allows you to set a start directory for the dialog (second parameter). The ESTK autocompletion also gives you a fifth parameter "helplink" which is undocumented and can safely be ignored.
Good luck
Jang

Just Loaded P6 - getting "COM Exception Caught" when loading P3 files -Help

I desperately need some help. I have loaded P6, uninstalled, loaded, unistalled, countless times trying to get the program to allow me to upload some p3 files I need to review. When I try to load the p3 files I get a pop-up that says "COM Exception Caught. Value = 0." I just purchased the program and have spent a week trying to install p6 and load these schedules. There is absolutely no customer support and I am very frustrated. If anyone can help me, it would be greatly appreciated. I don't know if it is a database issue, a P6 installation issue, or a loading issue.
Thanks.

user12144842 wrote:
I desperately need some help. I have loaded P6, uninstalled, loaded, unistalled, countless times trying to get the program to allow me to upload some p3 files I need to review. When I try to load the p3 files I get a pop-up that says "COM Exception Caught. Value = 0." I just purchased the program and have spent a week trying to install p6 and load these schedules. In the future, you should check out the knowledgebase, you will find answers to almost all of your problems.
In this case, you would see that in order to import P3 projects into P6, P3 must be installed.
If you own a P3 license and and want to be able to import/export to P3 without installing it, you can copy the following files from your P3 installation disk to your '\Windows\System32' Directory
W32MKDE.EXE
W32MKRC.DLL
WBTRV32.DLL
There is absolutely no customer support and I am very frustrated. If anyone can help me, it would be greatly appreciated. I don't know if it is a database issue, a P6 installation issue, or a loading issue.
>
Thanks.Have you contacted support? You can call them at 610-668-3030 or email [email protected]

Ie7 problem " Exception Caught while loading corporate.xml: [Object Error]

Similar Messages

Maybe you are looking for